Geographic Data, Multiple Sites And Replication
Mar 13, 2002
Hello all, I am in the process of doing some research and thought I would query you guys (and gals) for your opinions. I have never setup replication and my company is bringing up multiple sites, multiple GIS servers with one master GIS server. They want them to be replicated. Network bandwidth throughout the day is a concern and I may have an option to run replication at night. All servers will be continuously connected and they tell me that each site will be owners of it's data so data conflict should not be an issue. I originally thought qued-updating subscribers and transactional replication but it sounds like that does not work if the servers will always be connected. Any opinions on this anyone? Also, keep in mind that this is GIS data so there will be pretty big blob files in the database. Thanks in advance. RayH
View 1 Replies
ADVERTISEMENT
Oct 5, 2007
I am trrying to figure out what the best replication would be to use and or setup...
Her eis the current goal and structure..
We are just moving over to a new custom POS system that will be using SQL databases....We have have three locations and we want each location to be independent in case of network connectively failures to our primary location.
Basically, all three locations will be running SQL server 2005 and the POS app...
We want replication to occur overnight, so that each location will have the other locations transactions from the previous days, etc...
Essencially I want all three locations to "syncronize" their data every night....basically two-way replicaiton between all three sites...
Master Site will have say databaseA that the local POS system will use
Sencond Site will have say databaseA that the local POS system will use as well
Third Site will have say databaseA that the local POS system will use well...
Any thoughts or Ideas will be helpful
Thx
Martin
View 1 Replies
View Related
Feb 23, 2008
hi all. my question is simple: can i have 1 sql data base for multiple sites?
View 3 Replies
View Related
Jun 10, 2015
Can we setup a replication ( publisher and subscriber are Sql server) between two different domains, basically different company databases.
View 1 Replies
View Related
Mar 28, 2007
Is it possible to host more than one site on the server that hosts reporting services?We have a web app that is accessed through intranet. This site is hosted (IIS)on the same server as the sql server 2005 database that is used as the backend. Is it possible to run reporting services from this same server? or does the reporting services default site require to be the only site hosted?
View 1 Replies
View Related
Mar 28, 2006
How does database connection pooling work for multiple "copies" of the same web application on the same server? My IIS 5 win2K server has 32 sites, all pointed to the same code. Each site responds to a different IP/URL(www.a.com, www.b.com, etc.) for SSL reasons. DB is SQL 2000.
Based on perf stats, as a new site spins up, a new pool is created. So when I hit site 1, I see 10 pooled connections. Site 2 bumps it up to 20, etc. However, I don't see it go up to 320, so it isn't linear.
BTW, I'm trying to build a case for having 1 site/application that all URL's point to in order to conserve memory, connection pooling, caching, etc.
Any help is greatly appreciated.
-Allen
View 2 Replies
View Related
Jun 13, 2007
I'm very new at this and found this video very helpful. I downloaded Visual Web Developer 2005 Express Edition and following the direction except for changing a few column names. When I get to the point of viewing in browser I get the drop down box but nothing in it and the table doesn't show up either. I copied all the data to my website and tried to view it there but got some error that I don't understand. Can someone please help. The website I uploaded the files to is ocbeachrentals.net/default.aspx. Thanks.
View 1 Replies
View Related
Jul 15, 2004
We have a large SQL database, and we need to send out updated records to many clients' sites which are not connected.
We currently have a tool which looks at the audit log of changes we made, creates a file based on this, which is then emailed to our clients. They then run a tool we created to remerge the changes.
I suspect SQL server replication might make all this possible. Am I right? Can SQL server produce a file automatically which can be applied to a remote database to update the tables as appropriate? From looking at some replication stuff it looks to me like you have to have the servers on the same network.
View 1 Replies
View Related
Jan 3, 2014
I am creating a SSRS report with geographic world map. I am able to to download few shape files and use them.
However, the maps which i have downloaded misses few locations (for e.g. South Sudan which was formed few years back).
Where can i find the latest world map shape file?
View 3 Replies
View Related
Apr 19, 2007
Hello,
We have an environment with 7 servers that are running replication with one another and I'm wondering if there are any tools or experiences that any of you might have that may assist in the auditing of these servers. The data should be in synch accross the boards for all tables, but sometimes problems can arise such as replication not being set up properly, stored procedure's being out of synch, or data gliches etc.
In dealing with these issues we have an in-house written program which analises each table on each server and takes a snapshot and does column by column compare. We also have another program that will synch the data up (basically a delete/insert statement on the publisher). This process can take up to 3 weeks for our quarterly update of every table. I'm wondering if anybody has used any tools such as in SSIS or a third party tool and has done or is doing something similar to what we are doing now. If so, are there any tips you wouldn't mind sharing on how our process might be sped up?
Thanks,
Phil
View 4 Replies
View Related
Mar 3, 2002
Can any one pls gime list of sql server websites similar to SWYNK.
also pls gime some good sql server links for diccussion groups.
Thanks in Advance
Kinds regards
sk
View 3 Replies
View Related
May 5, 2006
Hi,
Can any one help me in pointing to some good web sites where I can get SQL scripts for most common useful functions.
Thanks
-Sudhakar
View 1 Replies
View Related
Mar 17, 2004
Does anyone know of any links to some great MS SQL sites I can check out to learn from?
Thanks for your thoughts.
Sincerely,
Tim
View 4 Replies
View Related
May 24, 2006
naresh writes "I would like to learn sql server 2000 and I do not have any programming experienc at all so how do i learn this programme. Do you have any suggestion or any basic books or materials you guys can refer to me
Thank you"
View 3 Replies
View Related
Sep 24, 2005
“HELP !! We’ve lost about 25 client’s websites. The databases were backed up along with all the actual files contained within each CSK….in addition, all the original databases are intact & can be reattached to the new SQL server…..the problem that exists where the original CSK files do not recognize the original database once it is reattached to the new SQL server. Any help would be most appreciated.
This is the error……
Login failed for user 'DARRYL1ASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'DARRYL1ASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: Login failed for user 'DARRYL1ASPNET'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +472
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
ASPNET.StarterKit.Communities.CommunityUtility.GetAllCommunitiesFromDB() +93
ASPNET.StarterKit.Communities.CommunityUtility.GetAllCommunities() +58
ASPNET.StarterKit.Communities.CommunityUtility.GetCommunityInfo() +327
ASPNET.StarterKit.Communities.CommunitiesModule.Application_BeginRequest(Object source, EventArgs e) +221
System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
View 1 Replies
View Related
Feb 15, 2006
If I were going to look into investing into a virtual dedicated server and wanted to save LOTS of $$$ by offerring SQLExpress (FREE) vs. SQL Server Enterprise $25,000 sticker price.
The Web sites that I build are for small businesses.
Is there an issue in using SQLExpress on the Internet? Considering it is the Web application account ID accessing the database so that is one user hitting the DB.
I am unclear on how I need to evaluate multiple calls to the system depending on how many users are on the Web site opening the connection performing SQL Commands then closing the connections all with the same user creditials.
<moojjoo />
View 4 Replies
View Related
Jan 25, 2008
What are your favorite Forum sites?
SQLTeam.com
SQLSERVERCENTRAL.com
TekTips.com
MSDNSQL Forum
forums.sqlmag.com
I hate to ask for information such as this but with the low response to my questions I was wondering anyone knows of a better site for SQL Server database mail issues?
Thanks,
Thom
View 1 Replies
View Related
Oct 31, 2006
I have the following code but it keeps erroring on the last line and I'm unsure as to why it is doing it???
Here is the error message
Msg 102, Level 15, State 1, Line 42
Incorrect syntax near '@Sites'.
declare @Sites varchar(50)
declare @Kit_No char(20)
declare @Location char(2)
set @Location = 'Ho'
set @Kit_No = 'mo1k'
if (SELECT sitetype from gss.dbo.kup_regions where region_code = @Location) = 10
begin
set @Sites = '''Pe'',''Hg'',''Vo'',''' + @Location + ''''
end
select
KR.Region_Code,
KR.Region_Name,
Z.Qty,
Z.Kit_Description,
Z.BookedOutToDate as Usage,
Z.Local_Cost,
(select overstock from gss.dbo.vGss_overstock where region_code = Z.region_code and kit_no = 'm01k' )as Rolling_Avg,
C.Symbol,
Z.FOB,
(SELECT
Price
FROM
gss.dbo.FedEx_Rates Fed
WHERE
SourceRegion = (SELECT Region_Code FROM gss.dbo.KUP_Regions WHERE Region_Name = 'penistone')
AND Weight = (SELECT MAX (Weight) FROM gss.dbo.FedEx_Rates WHERE Weight < (SELECT Packed_Unit_Weight From gss.dbo.KUP_Kits WHERE Kit_Code = (select Kit_Code from gss.dbo.GSS_Kits where Kit_No = 'm01k' ))+0.5)
AND Fed.DestRegion=KR.Region_Code) as Fedex_Price
from
(gss.dbo.kup_regions KR with (nolock)
left outer join
(select KRD.Qty,KRD.BookedOutToDate,KRD.Local_Cost,KRD.FOB,GK.Kit_Description,KRD.Region_code,KRD.Archive_Date
from gss.dbo.kup_region_data KRD with (nolock) inner join gss.dbo.gss_kits GK
on KRD.kit_code = GK.kit_code where GK.kit_no =@Kit_No and KRD.archive_date is not null )Z
on KR.region_code = Z.region_code)
inner join gss.dbo.Currency C with (nolock) on C.Country_Code = KR.Country_Code
where KR.ExpectExtract = 1 and KR.Designation = 'p' and KR.Region_code in @Sites
Many thanks for any help
View 4 Replies
View Related
Apr 12, 2007
I have a SQL 2005 server on a separate machine from my IIS machine, and anytime the SQL server restarts (like for last night's automatic updates) the connection pooling seems to break. Among the apps on this IIS box is Community Server 2.1, along with some other custom-built apps. The only way to resolve it is to stop and restart the IIS services.
Previously all SQL-dependent apps on that IIS box broke when SQL was reset, but I seemed to have addressed it, at least on my custom-built apps, by forcing a TCP connection in the connection strings (instead of the default named pipes method). I did change the Community Server connection strings as well, but for some reason that didn't seem to work.
Has anyone else experienced similar problems with interruptions in SQL connectivity bringing down apps that connect to that SQL server? I hate to turn off automatic updates just to make sure my ASP.NET apps are available.
I apologize if this isn't clearly an ASP.NET question, but hopefully someone can help me out.
Thanks,Josh
View 3 Replies
View Related
Apr 18, 2003
I am wondering how people maintain their SQL Servers which run at several customers sites and disk space is getting smaller and smaller? I want to say that we have tables in SQL dbs which hold a lot of date consisting of statistics, errors, logs etc.
They grow and grow and existing data is not needed anymore as soon as the data get older than let's say for one year. How do you overcome the problem reducing the tables but not charging the system too much as the major application also runs on the same server?
Thanks for any input
mipo
View 1 Replies
View Related
Mar 25, 1999
I am new to RDO and SQL I have been using DAO and know that the syntax is similar but the connections to the database is different. Does anyone know of a good site that explains this?
Thanks in advance.
LoPingKill
loping@inlink.com
View 1 Replies
View Related
Jul 28, 2006
Hi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan
View 2 Replies
View Related
Mar 14, 2007
Using VS2005, VB backend and javascript,
I have developed a relatively simple site - its got a few (12) simple aspx pages but its mostly client side javascript. Keeping disk storage costs down is a big concern with this my site. The disk usage for the site is ~24M. Since this was larger than I expected I started inspecting the files comprising my site and found that the "ASPNETDB.MDF" in my "App_data" folder is consuming 10.2M by itself. The thing is that site only has a few pages with calls to SQL Server - but I never did anything (that I know of) with ASPNETDB.MDF. Through VS2005, I opened up the MDF file and poked around, everything that I looked at was empty (NULL).
So my questions are:
What is causing the ASPNETDB.MDF to consume 10.2M even thought I can't see any data stored in it?
Is there anyway for my to reduce the size of this file? If so, how?
Can someone give me some pointers as to where to read up on what the ASPNETDB.MDF does?
View 4 Replies
View Related
Apr 17, 2008
Hi All,
I'd like to throw this idea 'out there' to see if I'm missing something I'll later regret.
I'm looking to resolve a scalability issue within our point-of-sale program. Currently the PK on transactional tables (sales and orders) is created by the application layer using a 'MAX(PKCol) + 1' mechanism. Obviously this requires that all users of the system, whether they're local or remote, have current data at any time they wish to insert. It's this limitation I'd like to remove. Most sites are using MS SQL Server 2000. No sites use anything specific to a later version.
By having a PK that can be generated independently of a 'master' database we can overcome this issue. The PK values will need to be unique within a 'group' of shops and able to be generated by a program operating at any level. From 'head office' which manages a number of shops, to the server at a given shop and even the register / till itself should be able to create ID's while disconnected from the server (using a local database).
It seems there's three main ways to accomplish this:
- Identities,
- MachineID, CurrentPK composite.
- GUID's
Identities: I've ruled out identities as I believe the administration overhead of dealing with them makes them impractical (there may be several hundred registers and therefore as many ranges to be set up within a group).
MachineID, CurrentPK composite: The MachineID references a Machine table which has an entry for each ethernet MAC address which connects to the database. The reason I chose to store the MAC in another table rather than simply using it as column is that I'm fetching it from sysprocesses.net_address(nchar(12)) and believe it's computationally cheaper to use an int than a text column. This mechanism means that we can still expose the PK to the user in some cases (eg: InvoiceNumber printed on a receipt). When the local database is not up to date (usually due to network problems) there will be cases where the CurrentPK will be duplicated but kept unique since it's coupled with the new MachineID. The big drawback to this method is that all current code will need to be revised to deal with the composite keys (this will be a significant amount of development).
GUIDs: Ugly to look at and time-consuming to type. They're not something which you'd expose to a user unmodified so realistically this means altering existing code to use a new 'user friendly' number where the PK is currently exposed to them. The use of GUIDs rule-out the use of clustered indecies on tables they're the PK for lest most inserts cause a page split. The splits would also necessitate more frequent index defrags / rebuilds. Using a non-clustered index incurs a penalty Vs a non-fragmented clustered one (doesn't it?) so while this avoids page-splits it comes at a cost.
After all that I think the best solution is to use GUIDs with a non-clustered index for each of the PK's. While it might not be the fastest of the options (slower reads/joins Vs composite PK) it will be significantly faster to develop while maintaining acceptable performance.
Thoughts?
View 14 Replies
View Related
May 12, 2008
I want the sites for ASP.NET 2.0 and SQL SERVER 2005 interview questions.
2) Sites for SQL SERVER 2005 concepts
View 6 Replies
View Related
Apr 15, 2014
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
View 4 Replies
View Related
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
View 8 Replies
View Related
Aug 25, 2015
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
View 6 Replies
View Related
Aug 5, 2004
Hi all!
I'm trying to get some XML data into SQL Server but i ran into problem when inserting the data (multiple orders with multiple order details) using a single sproc. Is it possible, or do I have to do in some other way? :confused:
I simplified my example to this:
-----------------------------
--CREATE PROCEDURE sp_InsertOrders AS
DECLARE @docHandle INT, @xmlDoc VARCHAR(4000), @orderID INT
--DROP TABLE #Orders
CREATE TABLE #Orders
(
OrderId SMALLINT IDENTITY(1,1),
FkCustomerID SMALLINT NOT NULL,
OrderDate DATETIME NOT NULL
)
--DROP TABLE #OrderDetails
CREATE TABLE #OrderDetails
(
OrderDetailsId SMALLINT IDENTITY(1,1),
FkOrderID SMALLINT NOT NULL,
ProductID SMALLINT NOT NULL,
UnitPrice SMALLINT NOT NULL
)
Set @xmlDoc = '
<Orders>
<Order CustomerID="1" OrderDate="2004-04-01">
<OrderDetails ProductID="6" UnitPrice="19"/>
<OrderDetails ProductID="3" UnitPrice="11"/>
<OrderDetails ProductID="9" UnitPrice="7"/>
</Order>
<Order CustomerID="2" OrderDate="2004-04-12">
<OrderDetails ProductID="2" UnitPrice="24"/>
<OrderDetails ProductID="4" UnitPrice="13"/>
</Order>
</Orders>'
EXEC sp_xml_preparedocument @docHandle OUTPUT, @xmlDoc
INSERT INTO #Orders (FkCustomerID, OrderDate)
SELECT CustomerID, OrderDate
FROM OpenXML(@docHandle, 'Orders/Order', 3)
WITH (
CustomerID INTEGER,
OrderDate DATETIME
)
SET @OrderID = @@IDENTITY;
--INSERT INTO #OrderDetails (@OrderID, ProductID, UnitPrice)
SELECT @OrderID AS OrderID, ProductID, UnitPrice
FROM OpenXML(@docHandle, 'Orders/Order/OrderDetails', 3)
WITH (
ProductID INTEGER,
UnitPrice INTEGER
)
-----------------------------
All orders are inserted first which makes the use of @@IDENTITY incorrect (it works fine if you insert a single order with multiple order details). Since it was quite some time since I last worked with SQL I am not sure if am doing it the right way... :confused: :confused: Anybody out there who knows how to solve the problem?
Cheers,
Christian
View 2 Replies
View Related
Sep 8, 2006
I have just taken over the job of sorting out a rather poorly designed database. It looks like it was 'upsized' from an access database to the SQL server. The SQL server is the 2000 version.
Now I am trying to generate a report of what the students in the database are owing by referencing the Receipt table and then all the available payment methods and allocations. I was wondering if there was anyway to work out data being displayed twice (Let me demonstrate)
Note1: All the tables are linked by a key of ReceiptNo. From what I can see there is a table for every payment type and allocation but no link between the two other then the receipt number.
Using the query:
SELECT T_Receipt.ReceiptNo, T_cheque.Amount AS Chq_Amount, T_credit.Amount AS Cre_Amount, StandingOrder.Amount AS Stn_Amount,
T_BankTransfer.amount AS Bnk_Amount, T_cash.TotalAmount AS Cas_Amount, T_RentPayment.AmountPayed AS Ren_Paid,
T_AdminPayment.AmountPaid AS Adm_Paid, T_InternetBilling.Total AS Int_Paid, T_Utilities.AmountPaid AS Util_Amount,
T_InvoicePayment.amountPaid AS Inv_Paid, T_OtherPayments.paymentAmount AS Oth_Paid, T_parkingBill.paymentAmount AS Prk_Paid,
T_TelephoneBills.TelephoneCredit AS Tel_Paid, T_DepositPayment.[Deposit payment] AS Dep_Amount, T_Receipt.cancelled AS Canceled,
T_Receipt.RemittanceReceiptNo AS Rec_Ref, T_Receipt.Student
FROM T_Receipt INNER JOIN
T_DepositPayment ON T_Receipt.ReceiptNo = T_DepositPayment.receiptNo LEFT OUTER JOIN
T_RentPayment ON T_Receipt.ReceiptNo = T_RentPayment.RentPaymentNo LEFT OUTER JOIN
StandingOrder ON T_Receipt.ReceiptNo = StandingOrder.ReceiptNo LEFT OUTER JOIN
T_TelephoneBills ON T_Receipt.ReceiptNo = T_TelephoneBills.ReceiptNo LEFT OUTER JOIN
T_parkingBill ON T_Receipt.ReceiptNo = T_parkingBill.ReceiptNo LEFT OUTER JOIN
T_OtherPayments ON T_Receipt.ReceiptNo = T_OtherPayments.ReceiptNo LEFT OUTER JOIN
T_InvoicePayment ON T_Receipt.ReceiptNo = T_InvoicePayment.receiptNo LEFT OUTER JOIN
T_cash ON T_Receipt.ReceiptNo = T_cash.ReceiptNo LEFT OUTER JOIN
T_AdminPayment ON T_Receipt.ReceiptNo = T_AdminPayment.ReceiptNo LEFT OUTER JOIN
T_BankTransfer ON T_Receipt.ReceiptNo = T_BankTransfer.receiptNo LEFT OUTER JOIN
T_Utilities ON T_Receipt.ReceiptNo = T_Utilities.receiptNo LEFT OUTER JOIN
T_credit ON T_Receipt.ReceiptNo = T_credit.ReceiptNo LEFT OUTER JOIN
T_cheque ON T_Receipt.ReceiptNo = T_cheque.ReceiptNo LEFT OUTER JOIN
T_InternetBilling ON T_Receipt.ReceiptNo = T_InternetBilling.ReceiptNo
GROUP BY T_Receipt.Student, T_Receipt.ReceiptNo, T_cheque.Amount, T_credit.Amount, StandingOrder.Amount, T_BankTransfer.amount, T_cash.TotalAmount,
T_AdminPayment.AmountPaid, T_InternetBilling.Total, T_Utilities.AmountPaid, T_InvoicePayment.amountPaid, T_OtherPayments.paymentAmount,
T_parkingBill.paymentAmount, T_TelephoneBills.TelephoneCredit, T_Receipt.cancelled, T_Receipt.RemittanceReceiptNo,
T_DepositPayment.[Deposit payment], T_RentPayment.AmountPayed, T_Receipt.Student
HAVING (T_Receipt.Student LIKE N'06%')
Which gives a result of:
RecNo.
30429
Cheque
250
Deposit
250
30429
679.98
250
This is fine but when I do analysis on this it appears as though the student has paid two deposit payments. I was wondering with out querying each table independently from an application if there was a criteria to specify that I only get one deposit result.
So as such say, give me all the payments but I only want one result from the other tables. I though about discrete but that wouldn't work here.
View 3 Replies
View Related
Apr 23, 2008
Hello All,
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part |
1 | RAM
2 | Disk Drive
10| CPU
11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive|
----------------------------------------------
A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item
SELECT SYSTEM PART
FROM System Info
WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
Any help is much appreciated!
View 3 Replies
View Related
Nov 15, 2006
Hi!
I have 7 source databases and one target database, all using the same structure. The structure is made of 10 tables, with foreign key constraints.
I need to merge the source databases into the target (which won't have any data before that process, but will already have the correct schema), and to keep the relationships between the records.
I know how to iterate over the source databases (with SMO foreach), but I'd like to know if someone can advise the best copy method for that context in SSIS ? (I don't want to keep the primary keys, but I need to keep the relationships...)
Any pointer most welcome!
best regards and thanks
Thibaut
View 1 Replies
View Related
Jul 12, 2000
suppose i am repliacting(Transactional Replication) to two servers using the same publications can i stop replicating to one server without disturbing the other server?
If i resume the replication to the server after two days what will happen to the two day's data?will they be replicated when i resume the replication?
Thank you
View 2 Replies
View Related
