Get ColorID Based On Number Of Values Passed
Dec 20, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.
I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color.
If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.
To elaborate; I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.
I need a function or procedure that will accept the arguments and provide me the result based on the values.
[URL]
View 1 Replies
ADVERTISEMENT
Apr 16, 2014
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
View 2 Replies
View Related
May 21, 2014
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
how can I update Table 1 to get desired results?
View 2 Replies
View Related
May 20, 2014
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
View 3 Replies
View Related
Aug 3, 2007
Hi all - this one has me stumped... PLEASE HELP!!!
I have a back/forward navigation link that passes a URL.startrow number (lets call it n) - based on n - I only want to select the record that is the n'th record based on a sort order (gall_order) - (SQL SERVER).
<cfquery name="gallHomePic1st" datasource="id" maxrows="1">
SELECT id
FROM gall_home
ORDER BY gall_order asc
</cfquery>
For e.g. - I want the 7th (14th - 21st etc) record based on gall_order asc.
Thanks guys - this has me stumped!
View 4 Replies
View Related
May 16, 2008
On my Home page I have a gridview that has Four columns: CustomerID, Product, Quantity, then a link (which appears on each row..called View). When a user clicks View on a particular row it will then send that particular CustomerID to the next page (CustomerProfile.aspx).
On the CustomerProfile.aspx page I have a textbox where the Customer Name should appear. How do I go about displaying the customer name in the textbox based on the CustomerID passed to the customerprofile.aspx page? Do I need to call a stored procedure? Do i need to call the Customer Table in my code?
(i'm using C#) Thanks!! Ur help is very much appreciated!
Side Note: i am passing the CustomerID by a SESSION variable called customerID ~~~>this is in my pageLoad method labelCustomerID.Text = Session["customerID"].ToString();
but i'm wanting to have the Customer Name in a textbox based on the above ^^^ session variable. My textbox is called txtCustomerName.Text
*** Customer Table***CustomerIDCustomerNameCustomerAddress
^^^wanting to call the customer name and put it in the customer name text box based on the particular customerID
View 22 Replies
View Related
Dec 19, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color. If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.I need a function or procedure that will accept the arguments and provide me the result based on the values.
View 2 Replies
View Related
Nov 3, 2004
I have a generic page with some fields on it, I would like to be able to "groom" the values so that the data is nice and consistent.
Example: input 1 -- user types in "bob" or "BOB" or "Bob" or "JOE" etc....
the resulting record in Sql would be "Bob", "Fred", "Joe"
nice and formted out.
Any suggestions?
View 1 Replies
View Related
Oct 17, 2007
Greetings, all!
I had a question about how SRS passes multiple values to a query.
For example:
Say I had a "select box" (Sorry, can't think of the proper term right now) with the following values:
F1
F2
F3
F4
The user then selects F1 and F4.
When SRS passes the selected values to the query or procedure, how are they passed? As a delimited value?
Examples of what I mean:
@Parameter = 'F1', 'F4'
@Parameter = F1 [Some unknown delimiting symbol] F4
@Parameter = 'F1,F4'
Does anyone know how this is done? Or is it done in some other odd way?
Thanks!
View 12 Replies
View Related
Jun 23, 2015
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General Tab:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
SQL Statement: EXEC FL_CUSTOM_sp_ml_location_load ?, ?;
Parameter Mapping:
Variable Name Direction Data Type Prmtr Name Prmtr Size
User: system_cd Input NVARCHAR 0 10
User: location_type_cd Input NVARCHAR 1 10
Variables:
location_type_cd - Data type - string; Value - Store (this is static)
system_cd - Data type - string - ??????
The system code changes based on the system field for each record in the load table
Sample Data:
SysStr # Str_Nm
3 7421Store1
3 7454Store2
1815061Store3
1815063Store4
1615064Store5
1615065Store6
1615066Store7
7725155Store8
STORED PROCEDURE: The stored procedure takes data from a load table and inserts it into another table:
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
This is an example of what I want to accomplish: I need to be able to group all system 3 records, then pass 3 as the parameter for system_cd, run the stored procedure for those records, then group all system 18 records, then pass 18 as the parameter for system_cd, run the stored procedure for those records and keep doing this for each different system in the table until all records are processed.
I am not sure how or if it can be done to pass the system parameter to the stored procedure based on the system # in the sys field of the data.
View 6 Replies
View Related
Nov 21, 2007
Hi,I'm using c# with a tableadapter to call stored procedures. I'm running into a problem where if I have over a certain byte size or number of parameters being passed into my stored proc I get an exception that reads: "Cannot evaluate expression because a thread is stopped at a point where garbage collection is impossible, possibly because the code is optimized." If I remove one parameter, the problem goes away. Has anyone run into this before? Thanks,Mark
View 3 Replies
View Related
Apr 16, 2008
Since SSIS is developed in Visual Studio is there a way to view the variable values as they are passed into SSIS? In Visual Studio I know if you hover over the variable a popup appears with the value in the variable.
I am having an issue with a variable value that is supplied through an "Execute SQL Task" it is a Directory path that is entered in through the application and used to determine where to pick up files to transfer. I have entered in the path using Fully Qualified(D:ImportExportCentralPrinting) and UNC (\SQLDEVELOPImportExportCentralPrinting) through both methods SSIS is telling me no files are available in the directory path. When I know for fact they do exists.
I would really love to see the variable values that are being used can anyone out there help?
Thank you all,
Mike
Michael Alawneh, DBA
View 3 Replies
View Related
Jul 15, 2014
I am writing a stored procedure that takes in a customer number, a current (most recent) sales order quote, a prior (to most current) sales order quote, a current item 1, and a prior item 1, all of these parameters are required.Then I have current item 2, prior item 2, current item 3, prior item 3, which are optional.
I added an IF to check for the value of current item 2, prior item 2, current item 3, prior item 3, if there are values, then variable tables are created and filled with data, then are retrieved. As it is, my stored procedure returns 3 sets of data when current item 1, prior item 1, current item 2, prior item 2, current item 3, prior item 3 are passed to it, and only one if 2, and 3 are omitted.I would like to learn how can I return this as a one data set, either using a full outer join, or a union all?I am including a copy of my stored procedure as it is.
View 6 Replies
View Related
Dec 14, 2012
I have a scenario where I need to compare a single DateTime field in a stored procedure against multiple values passed into the proc.So I was thinking I could pass in the DateTime values into the stored procedure with a User Defined Table type ... and then in the stored procedure I would need to run through that table of values and compare against the CreatedWhenUTC value.I could have the following queries for example:
WHERE CreatedWhenUTC <= dateValue1 OR CreatedWhenUTC <= dateValue2 OR CreatedWhenUTC <= dateValue 3
The <= is determined by another operator param passed in. So the query could also be:
WHERE CreatedWhenUTC > dateValue1 OR CreatedWhenUTC > dateValue2 OR CreateWhenUTC > dateValue3 OR CreateWhenUTC > dateValue4
View 3 Replies
View Related
Aug 7, 2015
I have a requirement to use DateDiff(Months,DateTime1,DateTime2) and this must return positive integer values.
Currently negative numbers are being returned because DateTime1 < DateTime2 or DateTime1 > DateTime2 .
The DateTime1 and DateTime2 values are dynamic and either of them can be bigger than the other.
Any query solution so that always positive value is returned.
View 3 Replies
View Related
Nov 13, 2015
I am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
View 6 Replies
View Related
Feb 27, 2014
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
View 6 Replies
View Related
May 19, 2006
How do I:Select f1, f2, f3, from tb1 where f1=Select f1 from tb2 where f1='condition'?
View 3 Replies
View Related
Sep 7, 2015
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
View 2 Replies
View Related
Feb 12, 2014
I want to add $ symbol to column values and convert the column values to western number system
Column values
Dollar
4255
25454
467834
Expected Output:
$ 4,255
$ 25,454
$ 467,834
My Query:
select ID, MAX(Date) Date, SUM(Cost) Dollars, MAX(Funded) Funding from Application
COST is the int datatype and needs to be changed.
View 2 Replies
View Related
Apr 26, 2015
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies
View Related
Mar 8, 2006
I'm trying to select records that occur more than once. I'm trying to base this on the email column. So basically I want the query to look something like this:
select * from table where emailaddress count > 1
Can someone provide me with the correct syntax? :)
View 2 Replies
View Related
Dec 15, 2005
Hi!
I have a table called DB1 that contains this:
MID
IIN
NUM_EVENTS
DATE
MID, IIN and NUM_EVENTS are composite keys. and only NUM_EVENTS get incremented. All records start with NUM_EVENTS = 1.How can I create a query that only displays those records that only NUM_EVENTS = 1 meaning their still on the first stage of processing?
View 6 Replies
View Related
Mar 23, 2015
I need a new field added 'Field1' which will add SEQUENCE number 1,2,.. based ON GROUP BY MasterID..AND another field TotalCount which will COUNT total masterID (here it will be 2)
CREATE TABLE #Temp1
( MasterID INT,
ClientName VARCHAR(10),
ProductName VARCHAR(50)
[code]...
View 0 Replies
View Related
Dec 28, 2013
writing the procedure for incrementing the number based on alphabets from A-Z
for example:
if alphabet is A then increment should be A001,next A002..etc
if alphabet is B then increment should be B001,next B002...etc
.
.
.
.
if alphabet is Z then increment should be Z001,next Z002...etc
View 4 Replies
View Related
Dec 15, 2005
Hi!
I have a table called DB1 that contains this:
MID
IIN
NUM_EVENTS
DATE
MID, IIN and NUM_EVENTS are composite keys. and only NUM_EVENTS get incremented. All records start with NUM_EVENTS = 1.How can I create a query that only displays those records that only NUM_EVENTS = 1 meaning their still on the first stage of processing?
$3.99/yr .COM!
http://www.greatdomains4less.com
View 3 Replies
View Related
Feb 13, 2015
The below data come from table table1. Instead of below result Ex1: I need output similar to the ex2.
Ex1:
CaseNumberStart CaseNumberEndExported
15000013150000131
15000014150000141
15000504150005041
15000505150005051
Ex2:
CaseNumberStart CaseNumberEndExported
15000013150000142
15000504150005052
How to get the result similar to Ex2, instead of Ex1. (ie., case-number is in sequential order then no need to break), And it should suit large dataset, I will finetune, if any performance issue.
View 1 Replies
View Related
Mar 11, 2008
Ok, I have two parameters - @StartDate and @EndDate. We only care about the date part of these paramters. What I would like to do is create a table with one record for each date between these two values. For example:
@StartDate = '01/01/2008'
@EndDate = '01/8/2008'
Should yield a table with 9 records in it for every day between @StartDate and @EndDate like so:
01/01/2008 <datacol1> <datacol2>
01/02/2008 <datacol1> <datacol2>
01/03/2008 <datacol1> <datacol2>
01/04/2008 <datacol1> <datacol2>
01/05/2008 <datacol1> <datacol2>
01/06/2008 <datacol1> <datacol2>
01/07/2008 <datacol1> <datacol2>
01/08/2008 <datacol1> <datacol2>
I know I could just do a WHILE (@StartDate <= @EndDate) loop and insert records into a temp table but I'm looking to see if there are any new methods/techniques to achieve this with a more simple statement.
View 3 Replies
View Related
Oct 26, 2015
I have a table Customer with below column
CustomerNumber , FName,LName,DOB
I have either 2 or 1 row for each customer number I want to write a SQL to pull data into 1 table based on same CustomerNumber, if only one row is present for the particular customer number it should pull null in FName2,LName2,DOB2 columns.
example:
CustNumber Fanme Lname DOB
1 Sam tiller 08/26/1981
1 Joe timy 01/02/1986
2 jack niks 09/09/1990
Result I want:
CustNumber Fname1 Lname1 DOB1 Fname2 Lname2 DOB2
1 Sam Tiller 08/26/1981 Joe timy 01/02/1986
2 Jack niks 09/09/1990 null null null
View 7 Replies
View Related
Jul 25, 2015
Below is the resultset I got using the following SQL statement
SELECT ROW_NUMBER() OVER (PARTITION BY ID ORDER BY create_date DESC) AS RowNum
,ID
,create_date
,NULL AS end_date
FROM dbo.Table_1
Resultset:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 NULL
[Code] ....
Now, I want to update the end_date column with the create_date's values for the next row_number. Desired output is shown below:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 2015-02-18
[Code] ....
View 4 Replies
View Related
Sep 15, 2015
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cd permit_nbr reference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1 991 100003
ABC1 992 100004
ABC1 993 100005
ABC2 880 100006
ABC2 881 100007
ABC2 881 100007
ABC2 882 100008
ABC2 882 100008
View 3 Replies
View Related
Feb 22, 2007
Greetings,
I need to avg column data based on grid textboxes. I cannot use AVG because the column values come from a comma delimited string. I have tried using !Parameters to store a count and total for each column but they are always read only. What is the best approach.
The columns come from a field which is in the format of (99,75,60,100,-1,20,-1,80,75) for each record
-1 means the values are not counted in the average. I have a function for each textbox that parses the value from the list based on the column index. There can be 1 to many columns.
Everytime I to set the value of a field or parameter at runtime I get a read-only error.
Maybee the only way is to use calculated fields.
Any ideas.
View 2 Replies
View Related
Jul 16, 2014
I have duplicate records in table.I need to count duplicate records based upon Account number and count will be stored in a variable.i need to check whether count > 0 or not in stored procedure.I have used below query.It is not working.
SELECT @_Stat_Count= count(*),L1.AcctNo,L1.ReceivedFileID from Legacy L1,Legacy L2,ReceivedFiles where L1.ReceivedFileID = ReceivedFiles.ReceivedFileID
and L1.AcctNo=L2.AcctNo group by L1.AcctNo,L1.ReceivedFileID having Count(*)> 0
IF (@_Stat_Count >0)
BEGIN
SELECT @Status = status_cd from status-table where status_id = 10
END
View 9 Replies
View Related
