With Query Anylyser, I am sending mails with DBMail successfully. Each time mail is sent, bottom half window messages tab shows
"Mail (Id: 30242) queued."
Is there any way to capture Mail (Id: 30242) and update the same in a table?
If I use msdb..sp_send_dbmail or save query results as text (using sqlcmd) and include the column headers I get the dashed separator line.
e.g.
custID, name
------, ------
1,bob
2,jamesI would like this
custID, name
1, bob
2 ,james
I found this method [URL] ....
::
sqlcmd -E -S (local) -d myDB -W -w 1024 -s "," -i "SELECT * FROM tblCust" | findstr /V /C:- /B > C: emp.csv
Can the same result be achieved sending as attachment with dbmail?
EXEC msdb..sp_send_dbmail @attach_query_result_as_file = 1I don't want to have to add column names as part of the query
Change the query to return column headers in resultset
SELECT 'CustID' as f1, 'name' as f2
UNION ALL
SELECT CAST(CustID as Varchar(10)), name FROM tblCustand set
msdb..sp_send_dbmail @query_result_header = 0
Is it possible to embed a image datatype into a EMail message using sp_Send_DBMail?
For example, my query would select a saved print screen image held in a SQL table as datatype image. I would prefer not to attach this image but rather have it print in the message section.
Thanks in advance.
Hi,
I am using SQL Server 2005 and need to mail. I used sp_send_dbmail for mailing but I am able send to one @recipeint and one @copy_recipient.
How can I mail to many email addresses and/or group?
Any help is appreciated.
Thank you,
Is anyone using a SP or Trigger to Create a HTML formated e-mail and send it useing DBmail?
If so could I see a sample of the code?
Jim
Users <> Logic
I have a stored proc that inserts records into a table, gets the identity, and uses that identity on a .net webpage. The page retrieves that identity key and processes some stuff on the page.
Everything was working fine until I tried to enable sql mail with triggers. I wanted to double-check some stuff, so I requested an sql email be sent whenever an insert occurs on the table above. Here's what I think is happening --- please correct and/or help me out with a work around?
I use the stored proc to insert a record.
I select the @@identity.
The trigger fires but uses select to retrieve the latest insert - thereby replacing the @@identity number returned to the page?
If this is true, could I do something like the following in the original stored proc? Is this a good idea or bad idea?
BEGIN
Declare @myID as int, @myBody1 as varChar(200)
Set @myID=0
INSERT INTO table (fields) VALUES (@PID, more stuff);
Set @myID = SELECT @@IDENTITY As [Identity];
If @myID<>0
Begin
Set @body1='<br />pid=' + more stuff.....
Exec msdb.dbo.sp_send_dbmail
@profile_name='profileName',
@recipients='email@email.com',
@subject='Temp History Insert',
@body=@body1,
@body_format= 'HTML' ;
End
END
Hi,
I'd like to have some feedback from the experts on SQL 2005.
The situations is the following.
I have an application .net/SQL server 2000 that send notification mails using the SQL mail feature. It works fine for years.
Sooner or later SQL 2000 will be out of service, so I decide to move my database to SQL 2005.
When I'm trying to put in production with my web hosting provider www.webhost4life.com, they said that are not supporting SQL DBMAIL on any SQL 2005 32/64 bits because the extra workload will slow down SQL 2005 performance.
My question is if somebody has experience of this situation in other installations or maybe is that provider who has some problems tuning the SQL servers.
We are having trouble configuring SQL Server 2005 to use MX records.
Basically, we want to use DBmail to utilize multiple mail relays.
The three mail relays are contained within internal DNS MX records.
smtphost.xxx.com. IN MX 10 mailhost1.xxx.com.
smtphost.xxx.com. IN MX 10 mailhost2.xxx.com.
smtphost.xxx.com. IN MX 10 mailhost3.xxx.com.
It doesn't seem to like using MX records? Any ideas?
Thanks KraftR
Tim.Kraft@Dowjones.com
I am using DBMail to send an email notification at the completion of service broker process and have been getting the following security error:
Msg 229, Level 14, State 5, Procedure sp_send_dbmail, Line 1
EXECUTE permission denied on object 'sp_send_dbmail', database 'msdb', schema 'dbo'.
I have given the userID used to run the Service Broker, databasemailuserrole in msdb as per instruction in the msdb. I have also given it execute permission on the sp_send_dbmail but keep getting the error. The service broker is run using a sql login and the dbmail profile is set as public profile. Any suggestions would be much appreciated.
Can a regular user configure DBMail on a SQL 2005 Server?
Thanks
I have a stored proc that inserts records into a table, gets the identity, and uses that identity on a .net webpage. The page retrieves that identity key and processes some stuff on the page.
Everything was working fine until I tried to enable sql mail with triggers. I wanted to double-check some stuff, so I requested an sql email be sent whenever an insert occurs on the table above. Here's what I think is happening --- please correct and/or help me out with a work around?
I use the stored proc to insert a record.
I select the @@identity.
The trigger fires but uses select to retrieve the latest insert - thereby replacing the @@identity number returned to the page?
If this is true, could I do something like the following in the original stored proc? Is this a good idea or bad idea?
BEGIN
Declare @myID as int, @myBody1 as varChar(200)
Set @myID=0
INSERT INTO table (fields) VALUES (@PID, more stuff);
Set @myID = SELECT @@IDENTITY As [Identity];
If @myID<>0
Begin
Set @body1='<br />pid=' + more stuff.....
Exec msdb.dbo.sp_send_dbmail
@profile_name='profileName',
@recipients='email@email.com',
@subject='Temp History Insert',
@body=@body1,
@body_format= 'HTML' ;
End
END
Hi!
I try to use Service Broker and DBMail together, but have some trouble with that.
I need to create the queue with activation.
And the stored procedure activated on this queue must send e-mail using DBmail.
It's looks simple, but it doesn't work.
There is my script to create objects, but don't forget create dbmail profile before use it.
PS And replace my email by yours
Good morning,
I'm stumped on this trigger error and I'm hoping someone can help. Here's the background:
BACKGROUND
Running SQLServer2005 on WinServer 2003 RC2. We use a SQL-based business application that has it's own alert system that uses database mail sucessfully, meaning the built-in emailing functions of the application work and can communicate with the database mail profile and send mail without error.
PROBLEM
I'm trying to write a trigger that will automatically send out an email alert after certain actions are performed in the business application. When I enable the trigger and it tries to run it fails with the following error:
SQLDBCode: 229Alerts error: SQLSTATE = 4200Microsoft OLE DB Provider for SQL ServerEXECUTE permission denied on object 'sp_send_dbmail', database 'msdb', schema 'dbo'...
TROUBLESHOOTING
I've seen several articles about DatabaseMailUserRole permissions and have made sure that all users, admin and even guest (for testing) are members of this role. Other than that our setup is pretty vanilla so I'm not sure what else to do.
We only have one large dbase for the app and the fact that the internal emailing fuction works makes me think that the permissions for the msdb are already correct (although I could be wrong)
This problem is driving me crazy so I thank you in advance for any suggestions!
I would like to replace mymail@mail.com by mypdl@mail.com , where mypdl is basically a people distribution list with 2 emails: my own email and my coworker and fellow DBA.
IF EXISTS
(
SELECT TOP 1 [PercentUsed]
FROM [BackupSize]
WHERE PercentUsed>=70 AND [drivename]='D:' -- D is the internal drive
ORDER BY [MetricDate] DESC
[Code] ...
But I think this won't work by design. Maybe I need to create an operator?
I am attempting to use dbmail from an application that logs in to my database using an application role. Since the application role does not exist outside the database, I created an spSendEmail in the database with "execute as login='mailagent'" in it: I set the database to trustworthy, created a 'mailagent' account and added it to the msdb database with the databasemailuser role rights.
Email works just fine on the server when I use the execute as login='mailagent' to fire off the msdb..sp_send_dbmail. But from the .NET application, I get the error: "Cannot execute as the server principal because the principal 'mailagent' does not exist, this type of principal cannot be impersonated, or you do not have permission." When I run my spSendEmail stored procedure from the calling database, I get the same error.
When sending an email in HTML format, shouldn't this allow for 2gb of data? Mine is getting truncated after 4000 characters.
@body NVARCHAR(MAX) = NULL,
EXEC msdb.dbo.sp_send_dbmail
@recipients='someone@some.com',
@reply_to='someone'
@from_address='someone@here.com>',
@profile_name = 'profilename',
@body_format = 'HTML',
@body = 'lots of data'
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.
For example,the output of the Aggregate Transformation may be 960216 ,but the
'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.
I'm sure the Group By of the Aggregate Transformation is right!
But ,when I set the "keyscale" property of the transformation,the results match!
In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.
Thanks for your advice.
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 :Â @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 :Â @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 :Â @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutputÂ
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
Hi
I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....
The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.
What can I do to avoid such situation?
Thanks in advance,
JD
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn
View 5 Replies View RelatedWhen overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.
View 5 Replies View RelatedHi there,Is it possible for me to do an insert
INSERT (some values) OUTPUT INSERTED.ID AS @ID
Grab ID in my code behind and create a session with it so i can redirect to another page and use the session to access the same record?
Or maybe
INSERT (some values)
SELECT @@IDENTITY
then grab that in my code behind and create a session?
I have been googling for a couple of hours and can't find a solution that i can follow or anyone saying you cant do it.
Any help much appreciated.
Thanks
OK, I'm starting up a project that requires an XML output format, which I haven't played around with before. My plan is to load the data into a schema which matches the XML format, and the run my queries with the FOR XML AUTO, ELEMENTS options.
So first, any comments on the plan of attack?
Second, how do I get the XML output in a clean enough format to read in, say, either Visual Studio or even Internet Explorer? The output comes out as a solid block, with no identing, which I guess the display utilities can deal with, but it also contains carriage returns and an odd header at the top (XML_F52E2B61-18A1-11d1-B105-00805F49916B), and the ubiquitous separation dashes (-------------------------------), and I'm having to manually fix these issues before I can display the XML in any reasonable format.
Any tips/tricks on dealing with XML are appreciated.
Hi I have an SP OmgångsVal
ALTER PROCEDURE OmgångsVal
@SexVal nvarchar,
@Sasong int
AS
BEGIN
SET NOCOUNT ON;
SELECT MAX(Omgang) AS [Omgång]
FROM Resultat
WHERE @SexVal = Lag And @Sasong = Säsong
END
And want [Omgång] as input in next SP
DECLARE
@SexVal nvarchar,
@Omgång INT,
@Sasong int
SET @SexVal='A'
SET @Sasong=20072008
EXEC Ubc90OmgångsVal @SexVal,@Sasong
BEGIN
SELECT Match.MatchId, Match.matchdate AS MatchStart, Team.team AS Hemma, Team1.team AS Borta, Match.score, Match.vsscore
FROM Match INNER JOIN
Team ON Match.team = Team.TeamId INNER JOIN
(SELECT TeamId, team, GroupId
FROM Team AS Team_1) AS Team1 ON Match.vsteam = Team1.TeamId
WHERE Match.Omgång = @Omgång
But i get error:
Msg 102, Level 15, State 1, Line 16
Incorrect syntax near '@Omgång'.
B Regards
Gert
I am selecting the following fields from my table and drop them into my .csv, the problem is that if i select all the fields which I commented out, and click on define columns, populate from source, execute, then on the Destination Tab, none of my columns are selected, it is blank, please help, here is my table
select
trad_type,
reference,
principal,
book,
strategy,
cpty,
buy_sell,
Quantity,
ident_type,
ext_ident,
sec_name,
price,
price_divisor,
traded_net_ind,
trade_ccy,
trade_ldt,
value_date,
commission,
exchange_fee,
other_fees
gross_consid,
net_consid,
sett_ccy,
trad_sett_ccy_xrate,
/*trad_sett_ccy_xrate_mdv_ind
trad_inst_ccy_xrate
trad_inst_ccy_xrate_mdv_ind
*/
pb,
acct,
inst_class
/*cont_desc
pl_book_ccy_xrate
Id*/
from Table1
i hav a table lik this
bank amount status
----------------------------
hdfc 1000 credit
icici 2000 credit
hdfc 500 debit
icici 1000 debit
i need to get the output like diz
bank credit debit
--------------------------------
hdfc 1000 500
icici 2000 1000
how can i get this output????
Thanks
ho to make this output in one line of this
set head off;
set pagesize 0;
set linesize 200;
set feedback off;
set termout off;
set pause off;
spool /bistari/dw/sds2/rosrita/fahmi/ogbs01.txt;
select distinct
ptt.marketing_ptt_num||'|'||
exchange.exchange_ident_name||'|'||
exchange.exchange_ident_code||'|'||
tel_profile.service_num||'|'||
customer_profile.customer_name,
tel_profile.apartment_num||'|'||
tel_profile.lot_num||'|'||
tel_profile.house_num||'|'||
tel_profile.floor_level_code||'|'||
tel_profile.building_name||'|'||
tel_profile.street_num_code||'|'||
tel_profile.street_type||'|'||
tel_profile.street_name||'|'||
tel_profile.postal_code||'|'||
tel_profile.section_name||'|'||
tel_profile.city_name||'|'||
tel_profile.state_code||'|'||
tel_profile.serv_class_code||'|'||
customer_profile.customer_segment_code||'|'
from
temp_ogbs_fahmi,
tel_profile,ptt,exchange,customer_accounts,customer_profile
where
temp_ogbs_fahmi.service_num = tel_profile.service_num and
temp_ogbs_fahmi.connect_date = tel_profile.connect_date and
tel_profile.ptt_num = ptt.network_ptt_num(+) and
tel_profile.exchange_ident_code = exchange.exchange_ident_code(+) and
tel_profile.account_num = customer_accounts.account_num(+) and
customer_accounts.customer_id = customer_profile.customer_id(+);
set head off;
set pagesize 0;
set linesize 200;
set feedback off;
set termout off;
set pause off;
spool /bistari/dw/sds2/rosrita/fahmi/ogbz02.txt;
select distinct
ptt.marketing_ptt_num||'|'||
exchange.exchange_ident_name||'|'||
exchange.exchange_ident_code||'|'||
tel_profile.service_num||'|'||
customer_profile.customer_name||'|'||
tel_profile.apartment_num||'|'||
tel_profile.lot_num||'|'||
tel_profile.house_num||'|'||
tel_profile.floor_level_code||'|'||
tel_profile.building_name||'|'||
tel_profile.street_num_code||'|'||
tel_profile.street_type||'|'||
tel_profile.street_name||'|'||
tel_profile.postal_code||'|'||
tel_profile.section_name||'|'||
tel_profile.city_name||'|'||
tel_profile.state_code||'|'||
tel_profile.serv_class_code||'|'||
customer_profile.customer_segment_code||'|'
from
temp_ogbz_fahmi,
tel_profile,ptt,exchange,customer_accounts,customer_profile
where
temp_ogbz_fahmi.service_num = tel_profile.service_num and
temp_ogbz_fahmi.connect_date = tel_profile.connect_date and
tel_profile.ptt_num = ptt.network_ptt_num(+) and
tel_profile.exchange_ident_code = exchange.exchange_ident_code(+) and
tel_profile.account_num = customer_accounts.account_num(+) and
customer_accounts.customer_id = customer_profile.customer_id(+);
exit;
output
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
XXXXX XXXXXXXXX XXXXXXXXXX XXXXX XXXX XXXX XXXXXX
slipzst@yahoo.com
hi all,
i've inserted one row like this
insert into e1 select 'phani',18000,'15-oct-2007'
i got the out put like this
phani180002007-10-15 00:00:00.000
how can i get the same output as i've given?
thankyou very much
Vinod
Even you learn 1%, Learn it with 100% confidence.
I have a simple process that goes through a directory and deletes files older than some number of days. I determine the full filename in a script task by setting a variable and then I use File System Task to do the delete. My goal is to output the file name to a log file. Nothing fancy, just output text (file name) to the default log provider so it can be logged if logging in enabled.
If anyone has any clues on how to do this that'd be great. If you need more information, let me know.
Cheers!
I've Proc1 and Proc2, the output of Proc2 can be in XML or thru anormal Select statement, depending upon the input parameter specified(@xmflag). The default of @xmflag = 0 which means non-XML output. NowProc1 is calling Proc2 and inserting the output of Proc2 in a temptable without specifing the @xmflag parameter. The message coming is"The FOR XML clause is not allowed in a INSERT statement". I don'tunderstand why this msg is coming when the Select statement FOR XML isnot executing.Anybody knows the reason?Thanks in advance.Subodh
View 4 Replies View RelatedI am using a dynamic t-sql string in proc1 to execute proc2, which returns an int variable named @Fatal_Error back to proc1.
When I execute proc2 I use the syntax:
EXEC @SQL @Params
@SQL is the Proc Name (varchar) and @Params is the parameter string (nvarchar).
If I include the @Fatal_Error variable in the dynamic creation of the @Params string the returning value from Proc2 is unable to convert int to nvarchar.
I have declared @Fatal_Error in proc1 as int and tried to add to the end of my dynamic t-sql EXEC but I still get 'Cannot convert int to nvarchar' .
Please help - I'm beginning to pull out hair! :-)
Thanks!
Here' s the syntax I tried when just passing it at the end of the EXEC call:
EXEC @SQL @Param_List = @Fatal_Error
AND I also tried:
EXEC @SQL @Param_List + ' '+@Fatal_Error+' '