i am currently creating a package which involves getting data from CSV files. i can successfully get the data from the files, my problem is, i need to get data from the header of the CSV files. i am currently skipping the header rows. the format of the CSV files is as follows:
-----------------------------------------------------------------------------------
Date, 20070704
Store Code, storeCode1
data row.....
data row.....
data row.....
-----------------------------------------------------------------------------------
technically, i also need the date from the header row, but since it is also indicated in the data rows, i have no problem with that. what i need is the Store Code, which is not indicated on the data rows. i need to store the data in a database in the following format:
Is it possible to have two different formats for the header and the data in a flat file connection?
An example text file would look like this:
Col1,Col2,Col3
abcdefghi12345testtesttesttest
abcdeeeee12333setsetsetsetsets
where the header is delimited and the data is ragged right.
It looks like you should be able to accomplish this from the Flat File Connection Manager Editor interface, but perhaps having different delimiter dropdown boxes for the header and columns can only be used if you are using the Delimited format?
Hi-I have a sql database (2005) that I need to extract a report from that looks somehintg like SELECT * From Empl_Hours WHERE some_flag <> 'true' .The thing works fine, but the problem is this: I need to insert a record in the 1st row that looks like "Static_text"+row_count() +"more_static_text"where row_count is the actual # of rows that were retrieved. Thanks in advance for any help.DAn
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
Basically, Marked Red record stands for Transaction Header, Marked Green records are Transaction Detail 1 and Marked Blue records stands for another Transaction Detail 2.
Now I need to move the data, based on the Record Type ( First Column 2,3,4) If its RecTyp 2 then move into Tran Header table, when RecType 3 then move into Tran Det1 table and finally, when RecType 4 then move into Tran Det2 table.
Anyone could guide how to start this migration.
Note: The given sample is the one set of data in that flat file. Similarly in the same flatfile we have multiple set of data.
I'm unable to figure out how to write a column header to my flat file destination. My source is a OLE DB SQL query and I need the column names as a header row in my text file destination. This seems easy but the closet I can find is hardcoding the column header row in the header property. Is this the only option?
I have a tsql script that gets the data I need, into the format I need, and saves it in a format (.output) I needI also have a script that creates a header for the report, basically its just a name and rowcount() that also works fine.PROBLEM: If I combine them using UNION, I have to pad out the header report with NULL columns, and it messes up the layout of the report.Anyone have a simple way to do this?here's my code:SELECT 'A71310000'+ltrim(Str(count(UserName))) + 'HRBATCH' AS header, NULL as col2, NULL as col3, NULL as col4, NULL as col5, NULL as col6, NULL as col7, NULL as col8FROM db_owner.PS_HR_HrsWHERE Reported is NULLUNION ALLSELECT EmplID, Convert(VarChar,DateWorked,111),'STSSH', CAST(REPLACE(STR(HoursWorked,9, 5), SPACE(1), '0') AS nchar(9)), HRAccountCode, CAST(REPLACE(STR(EmployeePayRate,18, 6), SPACE(1), '0') AS nchar(18)), 'A_STUDSUM', HRAccountCodeOverrideFROM db_owner.PS_HR_HrsWHERE reported is NULL What I need it to look like is: A713100007HRBATCH
10068800 2007/06/05STSSH002.00000 A108145 00000000007.500000 A_STUDSUM ...(this is a ragid right with spaces padding out fixed width columns) THANKS for ANY light ANYONE can shed on this.
I can't believe it's been a few days and I can't figure this out. We have a flat file (purchaseOrder.txt) that has header and detail lines. It gets dropped in a folder. I need to pick it up and insert it into normalized tables and/or transform it into another file structure or .NET class.
10001,2005/01/01,some more data SOME PRODUCT 1, 10 SOME PRODUCT 2, 5
Can somebody place give me some guidance on how to do this in SSIS?
I'm trying to extract data from a Flat File which is as fixed length as they come. The file has a header, which simply contains the number of records in the file, followed by the records, with no header delimeter (No CR/LF, nothing).
For example a file would look like the following:
00000003Name1Address1Name2Address2Name3Address3
So this has 3 records (indicated by the first 8 characters), each consisting of a Name and Address.
I can't see a way to extract the data using a flat file connection, unless we add a delimeter for the header (not possible at this stage). Am I wrong?
Any suggestions on possible solution would be much appreciated - I'm thinking Ill have to write a script to parse the file manually.
I have a flat file with header and detail information, it is actually employee punch card data. I need to parse the header line which contains the Employee ID and don't save it to a table just save the value. Then with the detail line, parse the different data elements and save them along with the employee ID to one table. Then continue until the next header line is read.
So I think I need a data flow transformation object that let's me save the Employee ID into a variable available when the next record is read. What type of transformation would be best?
where 'data' represents the data written out by the data flow process to the flat file destination. This actually turns out quite nice except that when I place the lines that start with '/' in the header box for the flat file destination the carriage return doesn't get written correctly after each line and I end up with an unrecognized character when I open the file in a simple app like notepad. I've tried using different encodings for the flat file connection, but to no avail. It is also interesting to note that when I close the package and reopen it the flat file destination editor UI also doesn't recognize the carriage returns and places a box in there place.
Below is a copy of the the property as it is written in the package xml:
<property id="92" name="Header" dataType="System.String" state="default" isArray="false" description="Specifies the text to write to the destination file before any data is written." typeConverter="" UITypeEditor="" containsID="false" expressionType="Notify">/INST=-1 /DELIMITER="," /FIELDS=FIELD1,FIELD2,FIELD3,FIELD4 /LOCATION=100</property>
I have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
Just attempting to import a simple tab delimited text file into my SQL Server 2005 database using the SQL Server Import and Export wizard. Column names are specified within the first line of the file. The Header Rows to Skip field value is listed as 0, but the wizard indicates that "The field, Header rows to skip, does not contain a valid numeric value".
Why isn't zero (0) a valid numeric value? I don't want to skip any rows. PLUS, I get the same error when trying to export to a text file although the header rows to skip field does not exist. I can increase the number to 1 or more, but the wizard will skip part of my data .. unacceptable.
What am I missing here? I installed SP1 of SQL server 2005, but that did not help.
I have a flat file.I am trying to set the value for the property "HeaderRowsToSkip" during runtime.I have set an expression for this in my "flat file connection manager". But this is not working.The connection manager is not able to take the value during runtime.
My expression is as follows:
DataRowsToSkip : @[user:: Var]
where "Var" is my variable which gets the value from the rowcount component and trying to set it back to the "HeaderRowsToskip" property.
I ve even tried setting the value to the "HeaderRowsToSkip" property in the expression builder.
Hi,I am trying to use BULK INSERT with format file. All of our data hasfew bytes of header in the data file which I would like to skip beforedoing BULK INSERT.Is it possible to write format file to skip these few bytes ofheader before doing BULK INSERT? For example, I have a 1 GB data filewith 1000 byte header. Except for first 1000 bytes, rest of the data isgood for BULK INSERT.Thanks in advance. Sorry if it is really a dumb question as I am newto BULK INSERT and practicing still.Bob
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?
I'm moving data between identical tables and have to use a flat file as an intermediary. I thought: "No problem, SSIS can do a quick export to a file, then move the file to another server, then use SSIS to import the data to the new server."
Seems simple, right?
I'm hitting all sorts of surprising data conversion errors. I used the export wizard to create the export package. This works fine. However using the same flat file definition, the import package fails -- even when I have no destination. That is I have just one data flow task that contains only one control: the Flat File source. When I run the package the flat file definition fails with data type conversion and truncation errors. One of the obvious errors is for boolean types. The SQL field is a bit, SSIS defined the column as DT_BOOL, the output of the data are literal text values "TRUE" and "FALSE". So SSIS converts a sql datatype of bit to "TRUE" and "FALSE" on export, but can't make the reverse conversion on import?
Does anyone else find this surprising? I would expect that what SSIS exports, it can import given all the same table and flat file definitions. Is SSIS the wrong tool to do such simple bulk copies? I'd like to avoid using BCP because this process will need to run automatically within SQL Agent so we can leverage all the error tracking and system monitoring.
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet Record Length 400
Positions Length FieldName
Record Type 01 1,2 L=2 Record Type (Always "01") 3,12 L=10 Site Name 13,19 L=7 Account Number 20,29 L=10 Sub Account 30,35 L=6 Balance 36,37 L=1 Active 37,41 L=5 Filler Record Type 02 1,2 L=2 Record Type (Always "02") 3,4 L=2 State 5,30 L=26 Address 31,41 L=11 Filler Record Type 03 1,2 L=2 Record Type (Always "03") 3,6 L=4 Coder 7,20 L=14 Locator ID 21,22 L=2 Age 23,41 L=19 Filler Record Type 04 1,2 L=2 Record Type (Always "04") 3,9 L=7 Process 10,19 L=10 Client 20,26 L=6 DOB 26,41 L=16 Filler Record Type 05 1,2 L=2 Record Type (Always "05") 3,16 L=14 Guarantor 17,22 L=6 Guar Account 23,23 L=1 Active Guar **There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet 01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use? I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
1. I am attempting to export data from a SQL DB (single table using a query) to a "flat file". 2. I would then like to take this "flat file" and import the data into a different SQL DB (same schema structure as first DB).
How do I put data into a text or excel file before I attempt a deleteion from a large table. I know how to select the necessary data, but i'm not sure about the t-sql required to put it into a file?
I was wondering if there was a way for me to append data to a flat file. The reason why i ask this is because i need to create a header for the report that i am exporting.
The way i imagined this working would to be create a dts that would export the header information to a flat file and the create another dts to export the report data and appensd it to the same file that the header dts created. This might not be the correct approach so i was hoping i could get some guidance of how i can accomplish this.
I'm using SSIS package to export some data to a comma delimited CSV file. The problem is that some of the fields have commas in them. Is there a way to deal with this other to changing the delimiter?
