Get Inbeetween Record In Date Range
Apr 7, 2006
I HAVE THIS SQL STATEMENT WHICH GET THE MIN(AMOUNT) and MAX(AMOUNT) and DISPLAY IT IN A SINGLE ROW.
HOW CAN I GET THE RECORD BEFORE THE MAX (AMOUNT) INBETWEEN DATES IN CASE THERE ARE 4 RECORDS WITH SAME EMPLOYEENO IN THE DATE RANGE SPECIFICIED ? THIS IS SORTED BY EMPLOYEENO AND STARTDATE DESC
SELECT EmployeeNo, StartDate AS StartDate, MIN(Amount) AS oldsalary, EndDate AS EndDate, BenefitCode,
(SELECT TOP 1 MAX([amount])
FROM EMPBENEFITS T2
WHERE T2.employeeno = T.employeeno AND startdate >= '2001-06-01' AND startdate <= '2007-06-02') AS newsalary
FROM dbo.empBenefits T
WHERE (StartDate IN
(SELECT TOP 1 ([startdate])
FROM EMPBENEFITS T1
WHERE T1.employeeno = T.employeeno AND Benefitcode <> 'HON' AND startdate >= '2001-06-01' AND startdate <= '2007-06-02'))
GROUP BY EmployeeNo, Amount, BenefitCode, StartDate, EndDate, Amount
ORDER BY EmployeeNo, StartDate DESC
THANK YOU SO MUCH ...
View 2 Replies
ADVERTISEMENT
Aug 31, 2006
I am currently using this SQL code to capture some records over the last 2 months and it has been working great. I am now being asked if I can change this code with specifications:
1) Scan the records in the system until the count (*) as Volume reaches 30 because they prefer that as a denominator when figuring an average
2) Only run the scan for a maximum of 6 months.
So, there will most likely be some records that do not reach a volume number of 30 in this date range. In this instance we will just take the maximum volume number reached at 6 months.
So, how can I write this so it will build the file each time a record has reached the maximum of 30 and keep scanning back until we reach 6 months? If someone could lead me in the right direction on the proper order of the methodology in my code to accomplish these results it would be greatly appreciated. Desperate!
declare
@startdate smalldatetime,
@enddate smalldatetime ,
@month int,
@year int
select
@startdate = dateadd (mm, -2, getdate())
SELECT
@month = datepart (month, @startdate),
@year = datepart (year, @startdate)
SELECT
@startdate = convert (smalldatetime, convert(varchar(2), @month) + "/1/" + convert (varchar(4), @year))
select
@enddate = dateadd (mm, 2 , @startdate)
select distinct
pe1.patev_loc_id as LocID,
pp_cproc_id_r as ProcID,
count (*) as Volume,
sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time)) as Minutes,
sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time))/count(*) as AvgMin
from
risdb_rch08_stag..performed_procedure (index pp_serv_time_r_ndx),
risdb_rch04_stag..patient_event pe1,
risdb_rch04_stag..patient_event pe2
where
pp_service_time_r between @Startdate and @Enddate
and pp_asn_req_no = pe1.patev_asn_req_no
and pp_asn_seq_no = pe1.patev_asn_seq_no
and pp_status_v = 'CP'
and pp_rep_id > 0
and pe1.patev_event_code = 'PB'
and (pp_asn_req_no = pe2.patev_asn_req_no
and pp_asn_seq_no = pe2.patev_asn_seq_no
and pe2.patev_event_code = 'PL')
and datediff (mi, pe1.patev_event_time, pe2.patev_event_time) > 0
group by
pe1.patev_loc_id , pp_cproc_id_r
View 1 Replies
View Related
Jun 16, 2015
I have a situation where an agent has number of activities for a certain date range. If an agent has multiple activities within certain date range, I would like BALANCE BEFORE from the first activity and BALANCE AFTER from the last activity. Here is my current SQL query that returns the following data:
DECLARE @BeginDate Datetime
DECLARE @EndDate Datetime
Set @BeginDate = '05-1-2015'
Set @EndDate = '05-31-2015'
SELECT
a.AgentName,
R.BALANCEBEFORE,
[Code] ....
AGENTNAME BALANCE BEFORE BALANCE AFTER DATE
DOUGLAS 9738.75 9782.75 2015-05-11
DOUGLAS 9782.75 9804.75 2015-05-12
DOUGLAS 9804.75 9837.75 2015-05-13
In the sample data above, ideally I would like my query to return data as follow:
AGENTNAME BALANCE BEFORE BALANCE AFTER
DOUGLAS 9738.75 (from first activity) 9837.75 (from last activity)
Not sure how I can write sql query to accomplish this.
View 7 Replies
View Related
Mar 25, 2008
I need to create records based on date range on monthly basis, please help.
Here is an example:
ID Startdate EndDate
1 20070301 20070522
and I need to create the following data set based on start and end date range
ID Startdate EndDate
1 20070301 20070331
1 20070301 20070430
1 20070301 20070522
View 8 Replies
View Related
May 26, 2015
When I run this query:
SELECT orderno, *
FROM _order
WHERE order_date >= '5/14/2015 00:00:00'
AND order_date < '5/15/2015 11:59:59'
ORDER BY order_date asc
I get a result of:
A1G7222015-05-14 13:00:11.143
A1G7232015-05-14 13:33:35.407
A1G7242015-05-14 13:39:16.657
A1G7252015-05-14 14:25:43.507
A1G7262015-05-14 14:29:18.050
A1G7272015-05-14 15:38:12.263
But I know there is one more record that falls into 05/15/2015
A1G7282015-05-15 12:26:52.807
Can you see what I am missing in my query in order for me to retrieve the missing record A1G728?
View 9 Replies
View Related
Apr 6, 2015
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
View 8 Replies
View Related
Aug 16, 2006
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies
View Related
Jul 29, 2015
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
View 9 Replies
View Related
Aug 27, 2015
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
View 3 Replies
View Related
Aug 11, 2013
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
View 18 Replies
View Related
Apr 22, 2015
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
View 5 Replies
View Related
Sep 28, 2012
I have to display the last temperature reading from an activity table for all the dates in a selected date range.So if I select the date range from 09/01/2012 to 09/30/2012, the results should look like this:
Date Temperature
09/01/2012 73.5
09/02/2012 75.2
09/03/2012 76.3
09/04/2012 73.3
09/05/2012 77.0
09/06/2012 74.5
and so on.
I am using this to get the dates listed:
WITH CTE_DatesTable
AS
(
SELECT CAST('20120901' as date) AS [Date]
UNION ALL
SELECT DATEADD(dd, 1, [Date])
FROM CTE_DatesTable
WHERE DATEADD(dd, 1, [Date]) <= '20120930'
)
SELECT [Date]
FROM CTE_DatesTable
How could I get the temperature if I did a sub-query here?
View 5 Replies
View Related
Jan 23, 2007
I have a report that I need to run on 2 different date ranges.
Both report's data is 2 days behind today's date.
so...
WHERE reportdate between dateadd('d',date(),-2) and dateadd('d',date(),-2)
OR SOMETHING LIKE THAT, NO BIGGIE HERE
The 2nd report is a month to date report. This is the 1 I can't figure out.
WHERE reportdate between (the first day of this month) and dateadd('d',date(),-2)
So that would look like
WHERE reportdate between 1/1/2007 and 1/21/2007
My problem is, if today is the 1st day of the month... how can I get my critiera to NOT do this
WHERE reportdaye between 2/1/2007 and 1/30/2007
Any help would be greatly appriciated!
View 2 Replies
View Related
Jul 23, 2005
Hi Group!I am struggling with a problem of giving a date range given the startdate.Here is my example, I would need to get all the accounts opened betweeneach month end and the first 5 days of the next month. For example, inthe table created below, I would need accounts opened between'5/31/2005' and '6/05/2005'. And my query is not working. Can anyonehelp me out? Thanks a lot!create table a(person_id int,account int,open_date smalldatetime)insert into a values(1,100001,'5/31/2005')insert into a values(1,200001,'5/31/2005')insert into a values(2,100002,'6/02/2005')insert into a values(3,100003,'6/02/2005')insert into a values(4,100004,'4/30/2004')insert into a values(4,200002,'4/30/2004')--my query--Select *[color=blue]>From a[/color]Where open_date between '5/31/2005' and ('5/31/2005'+5)
View 2 Replies
View Related
Jul 26, 2007
Have seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
View 4 Replies
View Related
Jan 5, 2014
I have a date/time value (dd/MM/yyyy HH:mm:ss) stored in a field as part of each record in a dataset.
I would like to achieve the following via a single T-SQL query if possible (efficiency is not an issue as the dataset is small)
On query run;
Check if any records in the dataset are within 10 minutes + or - of the current system time (using the date/time value referenced above)
if none
Load the first record
View 6 Replies
View Related
Oct 25, 2007
Hi;
We received a Payment from a customer on '10/10/2007 10:30:00'. i am trying to calculate the commission we would receive from that payment. the commission rate can be edited. so i have to find what the commission rate was when that payment was received.
I have a CommisionAudit table that tracks changes in commission rate with the following values.
ID | Commission Change | UpdatedOn
----------------------------------------------
1 | Change from 20->25 | 03/07/2007 09:00:00
----------------------------------------------
2 | Change from 25->35 | 10/09/2007 17:00:00
----------------------------------------------
3 | Change from 35->20 | 01/10/2007 16:00:00
----------------------------------------------
4 | Change from 20->26 | 11/10/2007 10:00:00
----------------------------------------------
with this payment, as the commission rate had been changed on 01/10/2007 it would obviously be 20%(ID 3). But I need to write sql to cover all eventualities i.e. Before the first and after the last. any help would be most welcome.
View 11 Replies
View Related
Apr 13, 2007
I have a fairly complex SP with 3 tables the idea being to display a Region, Client and EventI want to show only the last event for each client
I have replaced my event table with a View which returns the TOP 1 but all I get is the most recent of all records I want eg:Region 1, Client 1, Most recent event Region 1, Client 2, Most recent event Region 1, Client 3, Most recent event
View 2 Replies
View Related
Mar 5, 2007
if I create an index for a table with some records, do you think I can retrieve records in a giving range? for example, the 5th to 10th records?Possible? How can I do it?When we insert data at the table, would the index in sequential order? How would the index be created for new inserted records?I'm using SQL 2005 Express, not SQL 2000.
View 14 Replies
View Related
Dec 18, 2012
Using MSSQL 2008 R2
Given the following table
Code:
{ID, PropClass, OffSet, Amount}
{1, 1, 1, .30}
{2, 1, 2, .45}
{3, 1, 3, .50}
{4, 2, 1, .26}
{5, 2, 2, .15}
If I know the exact offset I can query easily enough using PropClass and the exact offset. But what if the offset is not included in the range for a given PropClass? How can I get a query to return the last valid record for a given PropClass from within a join?
For example, if my query contained PropClass = 1 and offset = 4, it should return the Amount of .50 from Record with ID 3
This is a query that I am trying to work on:
Code:
SELECT v.District, v.PropClass, YearAquired, SUM(cost * cnt), SUM(v.Cost * v.Cnt * t.Amount), SUM(v.Tax), COUNT(*)
FROM UPValue v
INNER JOIN UPMaster m on m.Year = v.year and m.Account = v.account
INNER JOIN UPTable T on t.PropClass = v.PropClass and t.Offset = v.Year - v.YearAquired
WHERE v.Year = 2012 and LeaseType = 2
group by v.District, v.PropClass, YearAquired
order by v.District, v.PropClass
Using <= will not work because that would return multiple records from UPTable when the offset is < the max offset.
View 4 Replies
View Related
Jul 11, 2012
I want insert automatically records for Range that user definded
For example user define :
from to city
10000 12000 tehran
15000 19000 babol
I should inserted 2000 record for tehran (10000,10001,....,12000) and 4000 record for babol (15000,15001,...,19000)
View 3 Replies
View Related
Mar 1, 2006
Hi
Can anyone advise me as to how I can add the date and time to 2 columns in the sql server database for each record that is added. I'd prefer not to use the webform. Can sql server add the date automatically to the row?
thanks
View 6 Replies
View Related
Aug 30, 2007
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
View 10 Replies
View Related
Jan 14, 2005
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies
View Related
Aug 9, 2007
I am working on a report for staff productivity, and have to get a summary figure for how much productivity was expected for a date range. The problem is that the amount expected from an employee can change if they move from full time to part time etc.
So I have a view that has the begin date, end date, expected daily production # by employee, and have to figure out how to get the multiplication to work correctly.
Example:
Employee 1 had a daily production # of 10 from 1/1/07-3/31/07 and daily production of 5 from 4/1/07 - now
If I run the production report for 1/1/07 - 6/30/07 what I want is one summary figure of for the entire range which would be 10*Datediff(d,1/1/07,3/31/07)+5*Datediff(4/1/07,6/30/07) or 890+450=1340.
Of course the actual date range for the report will be a variable, and the dates for the begin and end of a production date range will be all over the place.
Any quick and easy way to do this?
View 4 Replies
View Related
Apr 7, 2008
Hey guys..
pls help
what query should I do? Obtaining certain date only using SQL server2000?
Thnx...
View 4 Replies
View Related
Jun 18, 2006
Hi All,
I am very new to SQL and have a question, hopefully someone can answer.
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
View 8 Replies
View Related
Oct 2, 2006
Hi, 'am fairly very new to SQL SERVER 2000.
I have this particular problem....I need to develop a stored proc
where in a parameter checks the dates between JAN 1st and DEC 31st of a particular year. The parameter is declared for year..
I'll mention a small example below...
USE PUBS
declare @year as varchar
set @year = 1993
select * from employee
where hire_date >= '@year-01-01'
and hire_date<='@year-12-31'
This is just an example to show wat i want...
the year is prompted to the user...he/she can select any year
I get the following error message....
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Can anyone help me on this......
Thanks in advance
View 9 Replies
View Related
Mar 12, 2008
How to display start date and finish date together in the same column with a '-' in between?
2/24/2008 - 3/1/2008
View 3 Replies
View Related
Apr 5, 2006
I have a function that takes in a week number and returns data based on that week number, for one client we have a table that tells what the weeks are since they are not on a normal calendar, but their fiscal calendar. We now have another client that want the same function, but for it to return the data based on the normal calendar week. So, how can I determine the date range of a week, based on the week number?
View 3 Replies
View Related
Nov 16, 2007
I want to return data from a date range using MDX. The user will pick a month and a number for the number of previous months to display. So far, using SSRS to write my MDX code I have:
SELECT NON EMPTY { [Measures].[Steel Margin], [Measures].[Coil Weight], [Measures].[Amount], [Measures].[Gross Margin], [Measures].[Gross Profit] } ON COLUMNS, NON EMPTY { ([Date Shipped].[Month].[Month].ALLMEMBERS * [Out Rep].[Rep].[Rep].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@DateShippedFiscalYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@DateShippedMonth, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@DateShippedYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@OutRepRep, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@DimSalesTypeDescription, CONSTRAINED) ) ON COLUMNS FROM [Heidtman DW]))))) WHERE ( IIF( STRTOSET(@DimSalesTypeDescription, CONSTRAINED).Count = 1, STRTOSET(@DimSalesTypeDescription, CONSTRAINED), [Dim Sales Type].[Description].currentmember ), IIF( STRTOSET(@DateShippedYear, CONSTRAINED).Count = 1, STRTOSET(@DateShippedYear, CONSTRAINED), [Date Shipped].[Year].currentmember ), IIF( STRTOSET(@DateShippedFiscalYear, CONSTRAINED).Count = 1, STRTOSET(@DateShippedFiscalYear, CONSTRAINED), [Date Shipped].[Fiscal Year].currentmember ) ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
I have two other parameters: StartMonth and RollBackNumber. RollBackNumber will be the number of months and StartMonth will be my computed start parameter. I can write some code if necessary to compute the StartMonth (something like [Date Shipped].[Month].&[2007]&[3]&) if I have to.
View 11 Replies
View Related
Jun 26, 2006
Greetings!
I have a data source that gets generated based on a variable with the following SQL :
"select * from result where deletion_ind = 1 and when_deleted >= '" + (dt_str, 50, 1252) @[User::Last_Run_Date] + "'"
But when I run my package I get an error message saying:
The conversion of CHAR to DATETIME resulted in a DATETIME value out of range
The Last_Run_Date variable is set to '2006-06-25 14:35:05.450'
When I run the code in a QA session it works, but in the package it complains! What am I doing wrong?
Thanks for your help in advance.
View 35 Replies
View Related
Apr 12, 2008
I have a table namely "Information" , it has one field namely " Lastupdate" when i insert or update data , lastupdate column takes takes current datetime value. and this data i am displaying in another page . Here i want to display the information upto 21 days from last updated dates. means if i save data today (12/04/2008) then the "lastupdate" value will be (12/04/2008) and when i display this data should display upto 21 days means upto (23/04/2008) when date 24/04/2008 will come, this data should not display. and i want this from sql server query , if anybody have idea please write query for that , its very urgent ..............
View 2 Replies
View Related