Is it
possible in SQL 2005 to determine to which language symbol nchar(1) is
referred?
If
languages differ greatly, say, like Russian and English, can one write a function,
which, under the given alphabet, can determine to what language the symbol
belongs?
If the
languages have a similar alphabet, one is faced with the difficulties. For
example, it is needed to distinguish characters of American English from those
of Australian English or of English from those of any other European language
that uses almost the same alphabet. I don€™t know how to solve this problem.
What can you advise?
The final task
is to scan in Internet a great number of Web pages in various languages and to
make up a large dictionary, where each word will be entered in its language
group. It is in principle too important to select words in different languages
that use the same alphabet. Initial data for word selection will enter the
server in NTEXT format.
I am trying to convert a single code page MS Server database into a unicode database, using the unicode data types,NCHAR, NVARCHAR, NTEXT. The problem is that in the original database, indexes and constraints have been defined on the tables whose configurations need to be changed. As a result, the ALTER TABLE command fails. Are there any other alternative solutions? Also, data from the old database needs to be preserved. The objective is to create a unicode database which keeps the old data intact as well as accepts the new data in unicode. It would be great if you could help! Thanks, Sheetal.
Hi, I selected the columns which i need in the data source itself and i need 3 columns,one will direclty go to the destination without any change/transformation and about the other two i need to do few lookups.
When i try to do lookup for One column which has the datatype in the source as nchar(3) though the date in the column is a number(like 150,160,170 and so on), my lookup table(a dimension in DW) where i want to get the actual key by looking up with this number doesnt allow me to map to the dimension in the DW, as the Dimension has this column datatype as decimal (3,0)....i tried the datatype conversion to convert the nchar to decimal but it doesnt transform i dont know why...probably i am doing some mistake...Could someone suggest how to deal with this and which transformation to use..? I'd really appreciate if someone on this forum suggest how to deal with this..?
I have a column in my extract table as nchar(3) and in the destination (the same column with diff name ) it is decimal(3,0) .....i tried to use dataconversion transformation.....i even tried to use cast/convert fn's in the SQL Command (which i use in the "Source Transformation" to get the columns from the extract table).
I tried all the ways i can and still i get the same error..:
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E07 Description: "Error converting data type nvarchar to numeric.".
Can we actually do it...?? any help would be appreciated.
When I tried to insert armenian by doing the following insert into tablex (field1) values (N'testdata') it does not display in query analyzer or in the database as armenian. When I copy this to word it does not convert it.
What else am I supposed to do to get that information to redisplay the correct way and I would appreciate any tutorials or samples you can show or direct me to.
Hey there :)Sorry if I'm asking a dumb question here, but I'm still quite new to MS SQL,so this problem might appear larger to me than it really is.I'm trying to create a performance test environment for a Ruby on Rails andMongrel setup with an MS SQL Server 2000.The adapter, mssqlclient, uses some kind of "conversion" for unicode, here'sa quote from the homepage:"Automatically translate from proper UTF-16LE nvarchar fields in thedatabase to UTF-8 Ruby Strings you can display in your application"As far as the local DB designer knows, we're not using UTF16-LE nvarcharfields, unless it's something that happens implicitly.Either way, this is how a query from the mssqlclient adapter might look:SELECT TOP 1 * FROM Item WHERE (Item.Itemnumber = N'45783745')Response time the first couple of times was upwards of 20+ seconds, afterthe sql server has "awaken from its slumber", it's roughly 4 seconds.Omitting the "N" from the WHERE clause, response time is in milliseconds (asone would expect, regardless of the fact that there's currently >2.5million items in the table).Any tips on how to resolve this? Is the SQL statement bad, or is it aquestion of configuring SQL Server correctly?Thanks in advance for any help,Daniel Buus :)--http://www.rhesusb.dk
I'm using replace in a stored procedure to eliminate carriage returnsa user might have entered in an Access field.The problem is that even though it seems to strip out the carriagereturn I can't get rid of the "□" character.This is my code:DECLARE @myReturn nvarchar(1)SELECT @myReturn = NCHAR(10)REPLACE(UserAddress,@myReturn,' ') AS myTEXTFor example, the user has entered:123 Oak StreetSuite 101What I get after running the replace is: 123 Oak Street □ Suite101lq
I have a column in my extract table as nchar(3) and in the destination (the same column with diff name ) it is decimal(3,0) .....i tried to use dataconversion transformation.....i even tried to use cast/convert fn's in the SQL Command (which i use in the "Source Transformation" to get the columns from the extract table).
I tried all the ways i can and still i get the same error..:
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E07 Description: "Error converting data type nvarchar to numeric.".
Can we actually do it...?? any help would be appreciated.
can anybody please explain me why microsoft using nvarchar/nchar instead of varchar/char in northwind database and pubs database. I know if a column holds unicode data you should use nvarchar or nchar but for me all those tables in northwind/pubs are not holding unicode data. but still why microsoft settled for nchar/nvarchar.
Could someone please help me by explaining which one is best to use and when? For example, storing the word "Corona Del Mar" - which Data Type would be suggested? Thanks.
Hi I have a table, which contains Char and NChar NOT NULL columns Now I need to change it to NULL, when I use the following command, it fails for the following error,
The command I used, ALTER TABLE <TableName> ALTER COLUMN <ColName> CHAR NULL ALTER TABLE <TableName> ALTER COLUMN <ColName> NCHAR NULL
Msg 8152, Level 16, State 13, Line 1 String or binary data would be truncated. The statement has been terminated.
But for the same table, the below command executes fine, ALTER TABLE <TableName> ALTER COLUMN <ColName> SMALLINT NULL
Also I can change the NULLABILITY from NOTNULL to NULL using Enterprise Manger, editing the table using Table Design and selecting Allow Nulls option.
Hi, We are in process of converting all of the data type of the fields from CHAR/VARCHAR/TEXT into NCHAR/NVARCHAR/NTEXT (DBCS). Having more than 900 store procedure its look like real pain to make modification in all of the SPs.
After failed to find any help from GOOGLE, I am posting this request. I am basically looking for any automated tool which are convert data type in SP based on the field of the table used in the SP. Or at least which can provide me some sort of list which can helpful for doing manual reactoring.
Hi All: I am new to Sql 2000 database,Now I'm planing to create a table in my databse,my table included below fields like this : PoNo(the length is 15 characters) ,Supplier Name(the length is 50 characters).etc but I don't how to select the datatype for them. should I select Char or VarChar ? which one is the best slection ? thans in advanced!
#1 This stored procedure can be used to search and replace substring in the char, nchar, varchar and nvarchar columns in all tables in the current database. You should pass the text value to search and the text value to replace. So, to replace all char, nchar, varchar and nvarchar columns which contain the substring 'John' with the substring 'Bill', you can use the following (in comparison with the SetTbColValues stored procedure, this stored procedure replace only substring, not the entire column's value):
/* INFO USED HERE WAS TAKEN FROM http://support.microsoft.com/default.aspx?scid=kb;en-us;262499 */ DECLARE @X VARCHAR(10) DECLARE @ParmDefinition NVARCHAR(500) DECLARE @Num_Members SMALLINT SELECT @X = 'x.dbo.v_NumberofMembers' DECLARE @SQLString AS VARCHAR(500)
SET @SQLString = 'SELECT @Num_MembersOUT=Num_Members FROM @DB' SET @ParmDefinition = '@Num_MembersOUT SMALLINT OUTPUT'
Just Need Help On This Error Server: Msg 214, Level 16, State 2, Procedure sp_executesql, Line 11 Procedure expects parameter '@statement' of type 'ntext/nchar/nvarchar'.
I dont know why im getting a errrror b/c I followed http://support.microsoft.com/default.aspx?scid=kb;en-us;262499 exactly
