Get Total Count And Top N Rows In Single Call
Dec 3, 2007
Hi,
I want to return the total number of rows and top n records from my query. Is it possible to do this by simply running a single query. My query is dynamic so I can not create any temp table or table variables.
Bacially I want to eliminate 2 calls for sp_executesql
Set @ColumnCount = "Count(*)"
Set @Columns = " Top 100 a,b,c"
Set @Filter = "a = 1001"
Set @sql = "select " + @ColumnCount + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Set @sql = "select " + @Columns + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Thanks
Pun
View 3 Replies
ADVERTISEMENT
Jan 17, 2006
I have 2 tables:
TableA:
Name
UserA
UserB
UserC
Table B:
Name Data
UserA xxx
UserB asdasd
UserB ewrsad
UserC dsafasc
UserA sdf
UserB dfvr4
I want to count the total entries in Table B for every user in Table A. The output would be:
Name Count
UserA 2
UserB 3
UserC 1
I can use a Select Count statement, but I will have to make a SQL call for every user in Table A. Also, Table A is dynamic, so the users are always changing. Can this be incorporated into one SQL call to count the total rows in Table B for each user in Table A?
View 5 Replies
View Related
Jul 26, 2013
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
View 2 Replies
View Related
Sep 15, 2015
I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
So now I have to store the count in 'nn'.
View 5 Replies
View Related
Feb 27, 2007
hi frnds,
im very new to SSIS package .my package consists of Single Exceute task.
In Single Exceute SQL task i had 3 seperate queries to get the count of rows of 3 tables.
the Query goes like dis ...
select count(*) AS precheckcount1 from new_main_dts where cust_nbr like '875%'
like dis for another 2 tables i had written with the alias name precheckcount2 and 3
i mapped the variable user::precheckcount1 to precheckcount1 in the resultSet and for other two alias name i did the same.
while executing the package the error is thrown : [Execute SQL Task] Error: An error occurred while assigning a value to variable "precheckcount2": "Unable to find column precheckcount2 in the result set.".
please help me its very urgent
View 3 Replies
View Related
Jun 25, 2007
Hi all
i using lookup error output to insert rows into table
Rows count rows has been inserted on the table 59,123,019 mill
table rows count 6,878,110 mill ............................
any ideas
View 6 Replies
View Related
Aug 21, 2007
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
View 1 Replies
View Related
Sep 25, 2007
Hi,
I am using a foreach file to loop through mdb files kept in a folder and then transfer them to Sql server.
I want to do the following -
Sum the total no. of rows in mdb while the package executes
Sum the total no of rows transferred to Sql server.
Write them to a database (InitialRowCnt, FinalRowCnt, PackageNm, UserNm)
Note: Total = Total rows in all mdb files. so if there are 10 mdb files with 10 rows each, total = 100.
I saw a RowCount transformation..but just dont know where to place and what to do with it.
thanks
View 2 Replies
View Related
Feb 14, 2008
Hello, I am having problems with this query below:
1 SELECT Table1.Email AS Email,
2 Table2.UserName AS Username,
3 Table3.Members_Paid AS Paid,
4 (SELECT DISTINCT COUNT(*)
5 FROM Table3 AS e JOIN Table3 AS m
6 ON e.Members_Sponsor = m.Members_ID
7 WHERE (e.Members_Sponsor = m.Members_ID)) AS TotalRecords
8 FROM Table1 INNER JOIN
9 Table2 ON Table1.UserId = Table2.UserId INNER JOIN
10 Table3 ON Table2.UserId = Table3.UserID
11 WHERE (Table3.Members_Sponsor = @UserId)Basicly what I am trying to do is get all members that belong to a certain manager along with those members count total of members they have below them.The code above is giving me the count of the first member only, not different counts for each member.Hope you understand what I am trying to say and do here. Hope someone can help me out cause this hase been driving me crazy for a few days now.
View 1 Replies
View Related
Sep 21, 2013
I have to write a query to get the count() of the customer who has max sales in the last 6 months.my query is
Select Inv_Cust,Count(Inv_Cust) as Salescount From Inv_Header Group By Inv_Cust,Inv_Date Having Inv_Date Between MIN(Inv_Date) And DATEADD(MM,6,min(Inv_Date))
which gives me a result like
inv_cust ' Salescount
[code]...
How can I modify my existing query to get this.
View 2 Replies
View Related
Aug 29, 2005
i hv a problem in sql,
i) if in data hv time_start, time_end, date , id, how i can calculate the total time for very sesion user login
ii) how to make it if the total come out hv same id(may be two id hv two diffrent total), i want make it just one id then the total time...
post me at jeffliew2001@yahoo.com
View 6 Replies
View Related
Apr 26, 2007
I have a query that uses a CTE which looks similar to this
WITH cte_Products AS
(SELECT SELECT
ROW_NUMBER() OVER (ORDER BY ProductName ASC) AS RowNum,
RANK() OVER (ORDER BY id DESC) AS rank,
FROM Products
WHERE SomeColumn = @SomeVariable)
SELECT rownum,
columns,
(SELECT COUNT(*) FROM cte_Product) AS TotalRowCount
FROM cte_Product AS products
WHERE Rank <= @LastXItems
AND RowNum BETWEEN (@StartRowIndex + 1) and (@StartRowIndex + @MaximumRows)
ORDER BY RowNum
The (SELECT COUNT(*) FROM cte_Product) AS TotalRowCount is in there because I need the total row count that is queried by the CTE. But I feel like this is an inefficient way of doing this. I would just split out the query for the total row count, but then I have to do another sub query to get the rank again since rank is calculated using the Rank method. Does anyone have any ideas of how best to do this?
View 3 Replies
View Related
Apr 22, 2015
I have the following query:
BEGIN TRAN
Declare @StartDt date = '2015-03-15'
Declare @EndDt date = DATEADD(M, 1, @StartDt)
declare @Days int = DATEDIFF(d, @StartDt, @EndDt)
declare @TBLSales as table(SaleDate date, Value money)
DECLARE @Today date
declare @TBLSalesCounts as table( StatusDesc varchar(100), Value money)
[Code] ....
I end up with the following result :
How would I alter my while loop to only insert the sum total of each day, instead of creating duplicates for each day.
E.g.
2015-04-22
1150.00
2015-04-21
 785.00
2015-04-20
 750.00
View 3 Replies
View Related
May 17, 2007
Iam using front page to dispalay my results.
At the bottom it shows me 1/10 i.e 1st page of 10 pages.
but what do i do if i want it to be shown as 1-10 out of 100 (if each page contains 10 results).
or it would be really good if i get count of both no. of recors as well as no. of pages.
View 2 Replies
View Related
Jun 7, 2012
I have a Select TOP 1 statement which works fine, but i also want to count the total records at the same time. This is my SQL
Code:
SELECT TOP (1) dbo.ClientOffers.ProductID, dbo.ClientOffers.ClientID, dbo.Offers.Offertext, dbo.Offers.Offerlink, dbo.Offers.Image, dbo.Offers.Cost
FROM dbo.ClientOffers INNER JOIN
dbo.Offers ON dbo.ClientOffers.OfferID = dbo.Offers.OfferID
WHERE (dbo.ClientOffers.ProductID = 1284) AND (dbo.ClientOffers.ClientID = 0)
How do i also count the total records?
View 7 Replies
View Related
Feb 26, 2007
I'm trying to return the total records with my query, but I'm getting the following error:
"Item cannot be found in the collection corresponding to the requested name or ordinal."
Here's my query:
set rsFind = conn.Execute ("Select Count(Incident_ID) as TotalCount, Incident_ID, ProblemDescriptionTrunc, Action_Summary, RootCause, Problem_Solution002, " _
& " AssignedTechnician, DATEADD(s, dbo.TTS_Main.DateClosed, '1/1/1970') AS DateClosed, DATEADD(s, dbo.TTS_Main.Date_Opened, '1/1/1970') AS DateOpened, AssignedGroup From tts_main Where ProblemDescriptionTrunc LIKE '%" & prob & "%' And Last_Name LIKE '%" & l_name & "%' " _
& " AND AssignedTechnician LIKE '%" & assigned_tech & "%' And Incident_ID LIKE '%" & ticketnum & "%' AND assignedgroup LIKE '%" & assigned_group & "%' " _
& " Order By DateClosed DESC ")
<%response.write rsfind("TotalCount")%>
Thanks for any help!
Dale
View 10 Replies
View Related
Jul 20, 2005
in my procedure, I want to count the number of rows that have erroredduring an insert statement - each row is evaluated using a cursor, soI am processing one row at a time for the insert. My total count tobe displayed is inside the cursor, but after the last fetch is called.Wouldn't this display the last count? The problem is that the count isalways 1. Can anyone help?here is my code,.... cursor fetchbegin ... cursorif error then:beginINSERT INTO US_ACCT_ERRORS(ERROR_NUMBER, ERROR_DESC, cUSTOMERNUMBER,CUSTOMERNAME, ADDRESS1, ADDRESS2, CITY,STATE, POSTALCODE, CONTACT, PHONE, SALESREPCODE,PRICELEVEL, TERMSCODE, DISCPERCENT, TAXCODE,USERCOMMENT, CURRENCY, EMAILADDRESS, CUSTOMERGROUP,CUSTINDICATOR, DT_LOADED)VALUES(@ERRORNUM, @ERRORDESC,@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY,@STATE, @POSTALCODE, @CONTACT, @PHONE, @SALESREPCODE,@PRICELEVEL, @TERMSCODE, @DISCPERCENT, @TAXCODE,@USERCOMMENT, @CURRENCY, @EMAILADDRESS, @CUSTOMERGROUP,@CUSTINDICATOR, @DTLOADED)SET @ERRORCNT = @ERRORCNT + 1END --error--FETCH NEXT FROM CERNO_US INTO@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY, @STATE,@POSTALCODE, @CONTACT,@PHONE,@SALESREPCODE, @PRICELEVEL,@TERMSCODE,@DISCPERCENT, @TAXCODE, @USERCOMMENT, @CURRENCY,@EMAILADDRESS,@CUSTOMERGROUP, @CUSTINDICATOR, @DTLOADED--IF @ERRORCNT > 0INSERT INTO PROCEDURE_RESULTS(PROCEDURE_NAME, TABLE_NAME, ROW_COUNT,STATUS)VALUES('LOAD_ACCOUNTS', 'LOAD_ERNO_US_ACCT', @ERRORCNT, 'FAILEDINSERT/UPDATE')END -- cursorCLOSE CERNO_USDEALLOCATE CERNO_US
View 1 Replies
View Related
Aug 3, 2007
Hello,
I have report in which I have created groups base on the customer name. Can anybody please tell me how to get the total page counts for the individual group? I have page break after every new group and I am able to reset page count to 1 when new group start but I am getting the total number of pages for a particular group.
For ex, let say I have 4 groups, 1 group has 3 page, 2 group has 2 pages and 3 group has 6 page and 4th group has 7 pages I need something like,
For 1st group
'Page 1 of 3€™ when user click next page it should be 'Page 2 of 3' etc
Similarly for other groups as wll.
Thanks!
View 3 Replies
View Related
May 9, 2007
Hello,
I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of pulications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
--------------
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
View 1 Replies
View Related
May 10, 2007
Hello,
I am using SQL Server 2005. I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of publications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
View 2 Replies
View Related
Mar 30, 2015
We sell & ship packages that contain multiple items within them. The actual package (we call it the "parent item") is in the same table as the items within it ("child items"). If the record is a child item within a package, its "ParentId" field will contain the ItemId of the package.
So some sample records of a complete package would look like this:
ItemId | ParentId | Name | QtyAvailable
----------------------------------------
1 | NULL | Package A | 10
2 | 1 | Item 1 | 2
3 | 1 | Item 2 | 3
ItemId's 2 & 3 are items contained within the ItemId 1 package.
Now however, the client wants us to build a report showing all packages (all items where ParentId is NULL) however, they want to see the QtyAvailable of not only the package but the items as well (a total of 15 when using the example above), all grouped into a single line. So a sample report line would look like this:
Name | Available Qty
--------------------------
Package A | 15
Package B | 100
How can I do a SELECT statement that SUMS the "QtyAvailable" of both the parent & child items and displays them along with the package name?
View 6 Replies
View Related
Sep 11, 2015
I have a multi-value parameter that I am having a hard time writing a COUNT expression for in SSRS. Here is the situation:
1. If the "(Select All)" in the drop down is selected, COUNT all last names for ALL of the Auditor parameter
2. If a specific or multiple auditors are selected from the drop down, COUNT all last names based on that selection for the Auditor parameter
Currently, I am having it COUNT by ALL and it works but if a specific or multiple auditors are chosen, then the COUNT doesn't work.
View 3 Replies
View Related
Jul 14, 2015
I need to create a stored procedure for total count of the user's. If  User from front end  invites other user to use my tool, that user will be stored into a table name called "test",lets say it will be stored as"Invited 1 User(s)" or if he invites 2 users it will store into table as "Invited 2 User(s)."
But now we have changed the concept to get the ISID (name of the user) Â and now when ever the user invites from the front end, the user who have invited should stored in two tables "test" and " test1" table .
After we get the data into test and test1 table i need the total count of a particular user from both tables test and test1.
if i invite a user , the name of the user is getting stored in both test and test1 tables.Now i want to get the count of a user from both tables which should be 1,but its showing 2.
Reason: Why i am considering the count from 2 tables is because before we were not tracking the usernames and we were storing the count in single test table.,but now we are tracking user names and storing them in both tables(test and test1).
Here is my sample  code:
I need to sum it up to get the total user's from both the table but I should get 1 instead of 2Â
SELECT
(select distinct COUNT(*) from dbo.test
where New_Values like  '%invited%'
and Created_By= 'sam'
+
(select distinct count (*) Â from dbo.test1
where invited_by ='sam'
View 8 Replies
View Related
May 10, 2015
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
View 4 Replies
View Related
May 28, 2007
Hi,
I'm using sql server analysis services 2000, i have a problem with grand total when i select more than one member of any demension. the measure of this cube is built on a distinct count agregation function. i have only one measure in th cube
can some body help me !!
View 1 Replies
View Related
Jun 7, 2015
I am creating a query that shows the consumption of stock against Manf Orders (M/O) and struggling on the last hurdle. I am having difficulties calculating a running total based on an Opening Balance. The first line returns the correct results but the following lines do not. I have tried other variants of the "Over Partition" but still no joy?
SELECT CASE WHEN ROWNUMBER > 1 THEN ''
ELSE A.Component
END AS Component ,
CASE WHEN ROWNUMBER > 1 THEN ''
ELSE A.SKU
[Code] ....
Please see attachment to view output.
View 7 Replies
View Related
Feb 26, 2008
Hi,
Does anyone know how to calcuate total no of rows of all tables from database in single query?
Thanks in advance
--kneel
View 11 Replies
View Related
May 13, 2008
Hi,
I have a table like this.
Portfolio
Name
Value
ALL UP
Charge Off
47
ALL UP
CLTV
212
ALL UP
DSR
441
ALL UP
Exc Total
719
ALL UP
FICO
11
I want to add a row to the bottom of the table so that it will give the total of all values above.
It's something like this.
SELECT Portfolio, Name, Value , Total
FROM table
Total is equal to sum of all above values. Can anyone help me to write this query?
Thanks
View 5 Replies
View Related
May 15, 2008
I have a table like this.
Name Amount
CBank 5
InstLend 4
DTC 1
Now i want write a query which give me the out put like this.
Name Amount
CBank 5
InstLend 4
DTC 1
Total 10
can any one help me to write this please?
View 5 Replies
View Related
Nov 19, 2015
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
View 20 Replies
View Related
Oct 20, 2007
hi,
i have a stored procedure SELECT UserName AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits
WHERE (ProductID = @ProductID) AND (AnonimIP IS NULL)
GROUP BY UserName
UNION
SELECT AnonimIP AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits AS UserVisits_1
WHERE (ProductID = @ProductID) AND (UserName IS NULL)
GROUP BY AnonimIP
this will return something like:
zuperboy90 - 4 visits
ANONIMOUS - 6 visits
85.104.103 - 2 visits etc
how can i count the rows returned in both selections (4+6+2 = 12) ?
thank you
View 9 Replies
View Related
Dec 5, 2006
I want to write a stored procedure to add all of the flying time on a given airplane for each flight until now and then reset the total when it gets to a new airplane. I want to be able to pull from the table all flying time from a given date for a given airplane.
For example:
AircraftNo Date Flight_Hrs Total
38 3/1/06 1 4.5
38 5/10/06 1.5 3.5
38 7/10/06 2 2
100 8/19/03 4 8.5
100 10/04/04 3 4.5
100 9/17/06 1.5 1.5
I pulled the following code from the internet but I'm getting errors.
select AircraftNo
,Actual_departing_date,Flight_Hours
,sum(Flight_hrs) over partition by AircraftNo
order by Date
rows between current row and unbounded following) total
from (Select Distinct
F.AircraftNo
,F.Date
,C.Flight_Hrs
From GDB_01_4_Test.dbo.Flight_Log F,
GDB_01_4_Test.dbo.Flight_Cycle_Count C
Where F.Doc_No = C.Flight_log_Doc_No
Am I doing something wrong. I'm getting the following syntax errors (Using SQL 2000):
Server: Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'over'.
Server: Msg 170, Level 15, State 1, Line 18
Line 18: Incorrect syntax near 'Flight_log_Doc_No'.
View 5 Replies
View Related
May 6, 2008
This was a usual day today in office and i was working on a requirement in which i was needed to fetch the total number of rows effected by an update query, so I asked my best code mate "Google" and to my surprised there was not enough correct answers at least the one i was looking for.There were suggestions that you can use a select statement for the updated rows and make it like a select (count) which works fine, but just looking into the SQL server books online, it shows that there is even a better way to do it.After the update statement in my stored procedure i used "@@ROWCOUNT" with a select statement and it works like a charm.so the little find for my first ever post on asp.net is that there is a better way to find the total updated rows by a query Example: DB: Northwind , Table Employeesupdate employees set extension='1234'select @@ROWCOUNT This will return 9 (default rows in this table) as the rows effectedHope this helps
View 2 Replies
View Related
