Get Total Updated Rows Effected By A Statement
May 6, 2008
This was a usual day today in office and i was working on a requirement in which i was needed to fetch the total number of rows effected by an update query, so I asked my best code mate "Google" and to my surprised there was not enough correct answers at least the one i was looking for.
There were suggestions that you can use a select statement for the updated rows and make it like a select (count) which works fine, but just looking into the SQL server books online, it shows that there is even a better way to do it.
After the update statement in my stored procedure i used "@@ROWCOUNT" with a select statement and it works like a charm.
so the little find for my first ever post on asp.net is that there is a better way to find the total updated rows by a query
Example:
DB: Northwind , Table Employees
update employees set extension='1234'
select @@ROWCOUNT
This will return 9 (default rows in this table) as the rows effected
Hope this helps
View 2 Replies
ADVERTISEMENT
Jun 12, 2007
Hi,
In a procedure I want to know the no. of rows effected.
That means. No of rows inserted, updated , and no of records retrieved by an SQl statement.
Is there any way to know.
Thanks
Sreenu
View 6 Replies
View Related
Apr 26, 2006
What does it mean when you have a querey like this
Update tblWatchInstance SET [NewInvoiceGen] = '1' Where tblWatchInstance.WatchID = '%" & txtWatchID.Text & "%'"
But when you run in the Qanalyzer it says 0 rows effected...why is that??? could it be something i am missing.....
View 1 Replies
View Related
Jul 26, 2013
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
View 2 Replies
View Related
Jun 4, 2007
Stepping thru the code with the debugger shows the dataset rows being deleted.
After executing the code, and getting to the page presentation. Then I stop the debug and start the
page creation process again ( Page_Load ). The database still has the original deleted dataset rows.
Adding rows works, then updating works fine, but deleting rows, does not seem to work.
The dataset is configured to send the DataSet updates to the database. Use the standard wizard to create the dataSet.
cDependChildTA.Fill(cDependChildDs._ClientDependentChild, UserId); rowCountDb = cDependChildDs._ClientDependentChild.Count; for (row = 0; row < rowCountDb; row++) { dr_dependentChild = cDependChildDs._ClientDependentChild.Rows[0]; dr_dependentChild.Delete(); //cDependChildDs._ClientDependentChild.Rows.RemoveAt(0); //cDependChildDs._ClientDependentChild.Rows.Remove(0); /* update the Client Process Table Adapter*/ // cDependChildTA.Update(cDependChildDs._ClientDependentChild); // cDependChildTA.Update(cDependChildDs._ClientDependentChild); }
/* zero rows in the DataSet at this point */ /* update the Child Table Adapter */ cDependChildTA.Update(cDependChildDs._ClientDependentChild);
View 1 Replies
View Related
Oct 10, 2007
Is there a command that will tell me the number of rows that are updated in a statement. I would like to put this in an Stored Procedure and pass the #rows updated back out.
View 1 Replies
View Related
Nov 7, 2013
so i have an update query that is updating 50k rows per batch. my question is how do i campture how long it is taking to update 50k rows per batch.
View 3 Replies
View Related
Apr 28, 2005
I would like to return the the Primary Key of the row altered from this query - what changes do I need to make?
UPDATE Members SET LastLog = @time WHERE UserName=@user AND Password=@pass;
Thanks in advance,
View 6 Replies
View Related
Feb 9, 2005
Can this be done easilly through a stored proc?
View 1 Replies
View Related
Dec 8, 2006
is there a Trigger that monitors updated rows? I would like to run a
insert into sometable (pkcolumnname)
select pkcolumnname from monitoredtable where ????
"i dont know what goes here to only get value of rows that have been updated"
View 1 Replies
View Related
Apr 30, 2006
HI, I am wondering if it is possible to retreive this information without using row count transform. Can I get the # of rows inserted/updated or deleted by destination from the log?
Thank you,
Ccote
View 1 Replies
View Related
Nov 29, 2007
Hi,
I am trying to create a SSIS package, which will extract data from a SQL server view and populate the data in our local SQL server database tables. My objective is to get the data from the view such that only inserted and updated rows are fetched from the view.
Note: the view does not expose any updated date type of column thru which I can check. So I guess I have to compare each and every field with my destination table row's fields.
I would appreciate any suggestions on how to approach the problem.
Thanks in advance.
View 1 Replies
View Related
May 29, 2008
currently i m developing a web application with using sql server 2005
and i was testing yesterday a sql update query with sql server management studio.
in my update query i forgot to put where condition and now all the rows of table are updated. is there any solution to undo this and retrieve all rows back?
Regards Selena
View 6 Replies
View Related
Jun 29, 2006
Using MS SQL 2000I have a stored procedure that processes an XML file generated from anAudit program. The XML looks somewhat like this:<ComputerScan><scanheader><ScanDate>somedate&time</ScanDate><UniqueID>MAC address</UniqueID></scanheader><computer><ComputerName>RyanPC</ComputerName></computer><scans><scan ID = "1.0" Section= "Basic Overview"><scanattributes><scanattribute ID="1.0.0.0" ParentID=""Name="NetworkDomian">MSHOMe</scanattribute>scanattribute ID = "1.0.0.0.0" ParentID="1.0.0.0", etc etc....This is the Update portion of the sproc....CREATE PROCEDURE csTest.StoredProcedure1 (@doc ntext)ASDECLARE @iTree intDECLARE @assetid intDECLARE @scanid intDECLARE @MAC nvarchar(50)CREATE TABLE #temp (ID nvarchar(50), ParentID nvarchar(50), Namenvarchar(50), scanattribute nvarchar(50))/* SET NOCOUNT ON */EXEC sp_xml_preparedocument @iTree OUTPUT, @docINSERT INTO #tempSELECT * FROM openxml(@iTree,'ComputerScan/scans/scan/scanattributes/scanattribute', 1)WITH(ID nvarchar(50) './@ID',ParentID nvarchar(50) './@ParentID',Name nvarchar(50) './@Name',scanattribute nvarchar(50) '.')SET @MAC = (select UniqueID from openxml(@iTree, 'ComputerScan',1)with(UniqueID nvarchar(30) 'scanheader/UniqueID'))IF EXISTS(select MAC from tblAsset where MAC = @MAC)BEGINUPDATE tblAsset set DatelastScanned = (select ScanDate fromopenxml(@iTree, 'ComputerScan', 1)with(ScanDate smalldatetime'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScan set ScanDate = (select ScanDate fromopenxml(@iTree,'ComputerScan', 1)with(ScanDate smalldatetime 'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScanDetail set GUIID = #temp.ID, GUIParentID =#temp.ParentID, AttributeValue = #temp.scanattribute, LastModified =getdate()FROM tblScanDetail INNER JOIN #tempON (tblScanDetail.GUIID = #temp.ID ANDtblScanDetail.GUIParentID =#temp.ParentID AND tblScanDetail.AttributeValue = #temp.scanattribute)WHERE MAC = @MAC!!!!!!!!!!!!!!!!!! THIS IS WHERE IT SCREWS UP, THIS NEXT INSERTSTATEMENT IS SUPPOSE TO HANDLE attributes THAT WERE NOT IN THE PREVIOUSSCAN SO CAN NOT BE UDPATED BECAUSE THEY DON'T EXISTYET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!INSERT INTO tblScanDetail (MAC, GUIID, GUIParentID,ScanAttributeID,ScanID, AttributeValue, DateCreated, LastModified)SELECT @MAC, b.ID, b.ParentID,tblScanAttribute.ScanAttributeID,@scanid, b.scanattribute, DateCreated = getdate(), LastModified =getdate()FROM tblScanDetail LEFT OUTER JOIN #temp a ON(tblScanDetail.GUIID =a.ID AND tblScanDetail.GUIParentID = a.ParentID ANDtblScanDetail.AttributeValue = a.scanattribute), tblScanAttribute JOIN#temp b ON tblScanAttribute.Name = b.NameWHERE (tblScanDetail.GUIID IS NULL ANDtblScanDetail.GUIParentID ISNULL AND tblScanDetail.AttributeValue IS NULL)ENDELSEBEGINHere are a few table defintions to maybe help out a little too...if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblScan_tblAsset]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblScan] DROP CONSTRAINT FK_tblScan_tblAssetGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblAsset]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblAsset]GOCREATE TABLE [dbo].[tblAsset] ([AssetID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[AssetTypeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DatelastScanned] [smalldatetime] NULL ,[NextScanDate] [smalldatetime] NULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NULL) ON [PRIMARY]GO-----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScan]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblScan]GOCREATE TABLE [dbo].[tblScan] ([ScanID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetID] [int] NULL ,[ScanDate] [smalldatetime] NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScanDetail]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[tblScanDetail]GOCREATE TABLE [dbo].[tblScanDetail] ([ScanDetailID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOTNULL ,[ScanID] [int] NULL ,[ScanAttributeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[GUIID] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_ASNOT NULL,[GUIParentID] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[AttributeValue] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO------------------------------------------------------------My problem is that Insert statement that follows the update intotblScanDetail, for some reason it just seems to insert everything twiceif the update is performed. Not sure what I did wrong but any helpwould be appreciated. Thanks in advance.
View 9 Replies
View Related
May 8, 2015
how to track how many rows updated or deleted per day in a single table and load the information in another table .
View 7 Replies
View Related
Apr 7, 2014
I know 2008 MS SQL Server has a timestamp data type that adds date and time when the rows are inserted. Is there a way to automatically update the date and time when the rows are updated?
View 5 Replies
View Related
Sep 8, 2006
i am getting the above error on my database i have 2 rows with the same info on and another 2 with the same info on. example:
ID username password
1 bob bob
1 bob bob
1 john john
1 john john
I know this is a fault with ms sql 2005 however how do i fix it?
Ive found this link which explains everything but how do i start a query. I tried clicking on new query and copying the code. What is table1 meant to be? the database is dbl.tbl_admin. It wont find my database.
Im not sure how to do it anyway.
I need to change it though as its my admin password and Ive given it out to web design companys
http://geekswithblogs.net/allensb/archive/2006/07/27/86484.aspx
Can some 1 read the above page and give me full instructions, I dont know what im doing thanks
info@uktattoostudios.co.uk
View 7 Replies
View Related
Feb 26, 2008
Hi,
Does anyone know how to calcuate total no of rows of all tables from database in single query?
Thanks in advance
--kneel
View 11 Replies
View Related
May 13, 2008
Hi,
I have a table like this.
Portfolio
Name
Value
ALL UP
Charge Off
47
ALL UP
CLTV
212
ALL UP
DSR
441
ALL UP
Exc Total
719
ALL UP
FICO
11
I want to add a row to the bottom of the table so that it will give the total of all values above.
It's something like this.
SELECT Portfolio, Name, Value , Total
FROM table
Total is equal to sum of all above values. Can anyone help me to write this query?
Thanks
View 5 Replies
View Related
May 15, 2008
I have a table like this.
Name Amount
CBank 5
InstLend 4
DTC 1
Now i want write a query which give me the out put like this.
Name Amount
CBank 5
InstLend 4
DTC 1
Total 10
can any one help me to write this please?
View 5 Replies
View Related
Apr 16, 2014
I'm using a Merge statement to update/insert values into a table. The Source is not a table, but the parameters from a Powershell script. I am not using the Primary Key to match on, but rather the Computer Name (FullComputerName).
I am looking on how-to return the Primary Key (ComputerPKID) of an updated record as "chained" scripts will require a Primary Key, new or used.As an aside: the code below does return the newly generated Primary Key of an Inserted record.
CREATE PROCEDURE [dbo].[usp_ComputerInformation_UPSERT](
@FullComputerName varChar(50) = NULL
,@ComputerDescription varChar(255) = NULL
,@ComputerSystemType varChar(128) = NULL
,@ComputerManufacturer varChar(128) = NULL
[code]....
View 4 Replies
View Related
Oct 20, 2007
hi,
i have a stored procedure SELECT UserName AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits
WHERE (ProductID = @ProductID) AND (AnonimIP IS NULL)
GROUP BY UserName
UNION
SELECT AnonimIP AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits AS UserVisits_1
WHERE (ProductID = @ProductID) AND (UserName IS NULL)
GROUP BY AnonimIP
this will return something like:
zuperboy90 - 4 visits
ANONIMOUS - 6 visits
85.104.103 - 2 visits etc
how can i count the rows returned in both selections (4+6+2 = 12) ?
thank you
View 9 Replies
View Related
Dec 5, 2006
I want to write a stored procedure to add all of the flying time on a given airplane for each flight until now and then reset the total when it gets to a new airplane. I want to be able to pull from the table all flying time from a given date for a given airplane.
For example:
AircraftNo Date Flight_Hrs Total
38 3/1/06 1 4.5
38 5/10/06 1.5 3.5
38 7/10/06 2 2
100 8/19/03 4 8.5
100 10/04/04 3 4.5
100 9/17/06 1.5 1.5
I pulled the following code from the internet but I'm getting errors.
select AircraftNo
,Actual_departing_date,Flight_Hours
,sum(Flight_hrs) over partition by AircraftNo
order by Date
rows between current row and unbounded following) total
from (Select Distinct
F.AircraftNo
,F.Date
,C.Flight_Hrs
From GDB_01_4_Test.dbo.Flight_Log F,
GDB_01_4_Test.dbo.Flight_Cycle_Count C
Where F.Doc_No = C.Flight_log_Doc_No
Am I doing something wrong. I'm getting the following syntax errors (Using SQL 2000):
Server: Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'over'.
Server: Msg 170, Level 15, State 1, Line 18
Line 18: Incorrect syntax near 'Flight_log_Doc_No'.
View 5 Replies
View Related
Sep 15, 2015
I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
So now I have to store the count in 'nn'.
View 5 Replies
View Related
Dec 3, 2007
Hi,
I want to return the total number of rows and top n records from my query. Is it possible to do this by simply running a single query. My query is dynamic so I can not create any temp table or table variables.
Bacially I want to eliminate 2 calls for sp_executesql
Set @ColumnCount = "Count(*)"
Set @Columns = " Top 100 a,b,c"
Set @Filter = "a = 1001"
Set @sql = "select " + @ColumnCount + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Set @sql = "select " + @Columns + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Thanks
Pun
View 3 Replies
View Related
Dec 5, 2007
Hi,
Im trying to output the number of rows in a table returned in a report, into a textbox for a total record count
How would I do this ?
thanks
View 2 Replies
View Related
Sep 24, 2015
I need an SQL query to get all tables in DB effected in last 15 minutes.
Effected in terms of insert/delete/Update
View 9 Replies
View Related
Sep 22, 2007
(I moved this thread from datagrid area) I have a sql database that has individual records consisting of name, date, hours worked among other fields.Date and name is part of a unique identifier, so there can NOT be two records for the same person for the same date. My users need a grid view that displays days worked in ONE LINE per user. I have gotten close, but can't quite get the last part. Ive tried group by, distinct, and with rollup and no luck.TABLE:dan 12/13/2012 12:00:00 AM9.123dan 12/14/2012 12:00:00 AM3.123123cara 12/12/2012 12:00:00 AM4.222cara 12/16/2012 12:00:00 AM3.3333cara 12/17/2012 12:00:00 AM2 CODE: Select distinct(name), (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Sunday')as Sunday, (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Monday')as Monday, (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Tuesday')as Tuesday, (select
(y.hours) from dbo.testtime y where y.name=YT.name AND y.hours =
YT.hours and datename(dw, date)='Wednesday')as Wednesday, (select
(y.hours) from dbo.testtime y where y.name=YT.name AND y.hours =
YT.hours and datename(dw, date)='Thursday')as Thursday, (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Friday')as Friday, (select
(y.hours) from dbo.testtime y where y.name=YT.name AND y.hours =
YT.hours and datename(dw, date)='Saturday')as Saturday,(select sum(hours)from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours) as Totalfrom dbo.testtime YTgroup by date, name, hours RESULTS: cara NULL NULL NULL 4.222 NULL NULL NULL 4.222cara NULL 2 NULL NULL NULL NULL NULL 2cara 3.3333 NULL NULL NULL NULL NULL NULL 3.3333dan NULL NULL NULL NULL NULL 3.123123 NULL 3.123123dan NULL NULL NULL NULL 9.123 NULL NULL 9.123 Like I said, I am SO close, I just need it to look like;NAME SUN MIN TU WED TH FR SA TOTAL cara 3.333 2 4.222 9.555
dan 9.125 3.125 12.5 TIAdan
View 6 Replies
View Related
Jan 30, 2015
I am building a query. I have a table with 4 columns and need to try and put the times together. There are some inconsistencies with this, and i'm hoping to exclude them.. Here is a sample table:
Function | Employee | DateTime
--------------------------------------------
1 | 1 | 1/30/2015 1:47 PM
2 | 1 | 1/30/2015 1:49 PM
2 | 1 | 1/30/2015 1:50 PM
3 | 2 | 1/30/2015 1:37 PM
3 | 2 | 1/30/2015 1:39 PM
3 | 1 | 1/30/2015 1:40 PM
4 | 1 | 1/30/2015 1:42 PM
4 | 1 | 1/30/2015 1:45 PM
Function 1 = Clock In Type 1
Function 2 = Clock Out Type 1
Function 3 = Clock In Type 2
Function 4 = Clock Out Type 2
Basically what I need to do is take the time from rows with Function 1 and match it with Function 2 so I can get a total time of the clock in. Function 3 rows need to match up with Function 4 rows so I can get another set of total times. There may be more clock in rows then clock out rows or more clock out rows then clock in rows, and there may be multiple clock ins & outs per day per employee. I'm basically trying to get totals for each Clock In/Out type.
View 8 Replies
View Related
May 20, 2012
I need to show the total amount of rows in a specific table?
The query is as follows:
As part of the planning process to expand the database that supports Northwind operations, the IT manager would like to know how many rows are currently in specific tables so that he can conduct capacity planning.
The results needed include two columns, TableName( containing all the tables in the database and Rows, which contain the total amount of all the rows per table).
View 4 Replies
View Related
Mar 30, 2006
which is the most efficient query to find out the total number of rows in a table other than using - SELECT COUNT(*) ... in query
View 10 Replies
View Related
Jun 20, 2007
Hi,
I have requirement to display Total number of Rows in a Report in Page Header.
I have written the following code in Page header it shows RowCount for the Page only.
=Count(ReportItems!textboxInTableCell.Value)
Can anyone please help on this?
Regards
Raghav
View 3 Replies
View Related
Aug 17, 2015
My actual data is a bit more complicated, and uses fact and dimension tables, but I simplified it here.
I'm trying to build a chart that will compare sales of a single store to regional and national sales. The measures look like this:
Sales = SUM(FactTable[Net Sales])
Regional Sales = CALCULATE([Sales], ALL(FactTable[Store Number]))
National Sales = CALCULATE([Sales], ALL(FactTable))
And it ends up looking like this:
Note that the Store Number is selected, but the Store Region is not, it's just the result of cross-filtering. Regional Sales incorrectly matches National Sales. If I then select the Region, the measures work:
I'm actually using VBA to change the Store Number slicer, as the end users don't want to select the region, then scroll through a list of store numbers. They just want to enter a store number and hit enter. I've tried a few things in DAX and VBA, and failed.
View 2 Replies
View Related
