Getting Reports On Multiple Pages
Jan 4, 2008
I have a data set which has more than one record. Iam tyring to create a report without using the wizard. I want the report on multiple pages. I dragged some text boxes on to the design and added the expressions in there. If I run the program now Iam only getting the report with the last record. How do I get the report for all the records in the Dataset on multiple pages ? . I want each record on one page. I am forsure getting more than one record into the Dataset.
Thanks in advace for the help
View 2 Replies
ADVERTISEMENT
Apr 17, 2008
Hi All,
I have a requirement wherein I need to create an asp web page(not asp.net), where the user will select the report criteria and using those selected criteria I need to build a report using SQL server 2005 reporting services.
Previously I have used SSRS reported with asp.net application and I am comfortable with creating SSRS report but I am not sure how it will work with ASP pages. Could you please let me know how we pass the report parameters from asp page to SSRS.
Thanks,
Rajiv
View 7 Replies
View Related
Apr 16, 2007
Hi, all experts here,
Thank you for your kind attention.
I am wondering if we can drill down reports in a different page with different layouts and columns? e.g. I have too many columns desired to see in a report, so I want to direct the users to another page with different layouts and columns, so the first view in the report wont display so many columns in a page. Is it possible to make it in SQL Server 2005 Reporting Services? And if it is possible then how? Hope my question is clear for your help.
Thanks a lot in advance and I am looking forward to hearing from you.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Mar 19, 2008
I have a master report which has three sub reports. I want to show the last sub report on the second page only if data is available otherwise I want to hide the sub report and as well as the second page. I use a expression to hide the subreport and it works. But the problem is with the page breaks. Even though I use a rectangle for page break, it does not work as I want.
Doesn anyone know the solution for this?
Thanks
View 1 Replies
View Related
May 18, 2015
I must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT
rc.wo_id,
rc.process_id,
rc.item_id,
rc.lot_no AS full_lot_no,
rc.oper_id, rc.seq_no,
CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
Rework ID Ingot Oper ID Piece Rework
28 xxxxxx14 5 M88 Route 1
55 xxxxxxx15 5 B106 Route 2
79 xxxxxxx19 5 M68 Route 3
164 xxxxxx234 5 T16 Route 4
xxxxxx234 5 B82 Route 4
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
View 2 Replies
View Related
Apr 5, 2008
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
View 7 Replies
View Related
Nov 8, 2007
I need to create a simple dashboard report that will be displayed on a large screen.
My problem is that there can be potentially more records than the screen can display.
Based on how i size my report the report can be a single page with a scroll bar or mutliple pages.
My question is: Is there any way of automatically looping through pages or to automatically scroll down through the records in SSRS
If anyone has any experience of something like this or suggest a work around in SSRS could you please let me know
Thanks in advance
Brunzire
View 3 Replies
View Related
Jul 22, 2006
Hi all
After deploying my report on the report Server, I try to access it on the browser which gives me the following error.
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'http://localhost/reports/Pages/Folder.aspx'. Line...<%@ Page language="c#" Codebehind="Folder.aspx.cs" AutoEventWireup="false" Inherits="Microsoft.ReportingServices.UI.Folde...
How can I trouble shoot this error.?
Please help me out.
Thanx in advance.
Ronald
View 7 Replies
View Related
Jan 10, 2008
I have a report that prints one record on a page. It also has four tables which print records from related tables. I pass it the ID of the master record an it works great.
But I need to be able to print multiple master records, ie use the same form to print more than one record from the master table. I can pass more than one ID and change the Stored proc to return more than one master record, which I believe, with the addition of a page marker, will produce a multiple form report - but what about the tables which display multiple records for each ID? Does reporting Services understand the relationship between the tables and and restrict the tables on each page to the ID?David
View 2 Replies
View Related
Aug 8, 2007
I have a report that only has one page when previewed but when it's printed there are two pages. This is a problem because I get two printed pages to my report with "1 of 2 pages" on the first page and "2 of 2 pages" on the second but there is only data on the first page and the second has header and footer but no data.
Is there a way to force the report to fit everything on one page? Or some other setting I am missing?
Thanks.
View 4 Replies
View Related
May 15, 2008
I have a report that returns multiple tables in a group. I'm grouping by project manager which has multiple projects, each project contains data in a table. My problem is that when I print, my tables are being cut off so that the headers and first few rows are on one page and the rest of the table and totals are on the next page. There was a command in access that would allow me to keep my tables together so that if a table wouldn't fit on a page it would move the whole table to the next page. No table is larger that a page, but I'll get 2 and 1/2 tables on page 1 and 3 and 1/3 on the second page, I'd like to have 2 on the first page, move table 3 to page 2 and move on from there. Is this possible?? Thanks for any help you can give me.
View 3 Replies
View Related
Dec 20, 2006
Hello.Lets say that there is a table with N rows. now, i want to display the table's data on a web page. one way is to select the whole table and add each row's data to the webpage (something like SELECT * FROM TABLE1).going this way will create a huge page. i want to speared the results over multiple pages - excatly as this forum spread each forum messages over multiple pages.
for this purpose, i need to query Y rows each time, for example, if my table has 20 rows, and say that i want that each page will display 5 rows, then i need to query 5 rows each time. the first 5 rows for the first page, the next 5 rows for the second page and so on...
is there any way to achieve it using an SQL query?
the simplest way is to select the whole table and manaually filter the results. but this way will become slow as the table grows with data... and i dont want to select rows which i wont display anyway.
any suggestions?
Thanks.
View 5 Replies
View Related
Mar 30, 2007
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
View 11 Replies
View Related
May 24, 2006
I am staring to lose my mind on all this "work-around" BS in trying to create a dynamic header.
I have a report with contains a table, whose first two lines are a header line in which I want to repeat on each page. Then I have about 20 detail rows of information related to the header. The 21st detail row is a merged cell that contains a subreport relating to the header item.
When printing to PDF, the detail rows consume about half the page and the subreport is anywere from half a page to several pages long. When the subreport is more than half a page, it skips the end of the first page and starts on the top of the next page, leaving the bottom half of the first page blank. No matter what I set the page breaking to, it continues this behavior. In addition, when the subreport data spans more than one page, my parent table's header row will not print to the next page even it the RepeatOnNewPage is set to true.
I am coding this way because I have found no good way of creating a dynamic header that will correctly and consistantly display data that has detail that spans more than one page.
Any thoughts on what I might be doing incorrect?
View 6 Replies
View Related
Oct 2, 2014
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
View 2 Replies
View Related
Dec 20, 2007
Hi Friends,
How do I display a bar graph in my main report? I dont want it to be displayed on separate page. When I click on some entities on my main report, a graph should be popped up in the same report in some corner? how do I do that ? Please let me know.
Thanks & Regards
Naveen J V
View 3 Replies
View Related
Apr 23, 2007
Hi all,
I have created a report that everyone is happy with.
My dataset (simplified) looks like this:
SELECT *
FROM FamilyMember
WHERE QuestionnaireID = @QuestionnaireID
Now, instead of running individual reports the users want to run several reports on a list of QuestionnaireID's.
I thought something like this would work:
SELECT *
FROM FamilyMember
WHERE QuestionnaireID IN (@QuestionnaireID)
but RS complains about converting '152,153' to an INT.
Is there a way to accomplish this?
I am guessing I need to convert the nvarchar @QuestionnaireID to a real list of INTs but am unsure how to do this...
View 9 Replies
View Related
Aug 21, 2007
HI,
i am a new to SSRS and i am facing a problem with Ad Hoc reporting.
actually i wanted to create a report with data from two different table. now its the relation between these two tables that is not allowing me to create a req. adhoc report.
i want the report to have data from table A and table B and the relationship between A and B is many-to-many. so in the database design i have an associate table C between A and B. so in .dsv file i have C related to A as one-to-many and C related to B as one to many.
Now here how do i get data from both table A and table B?
View 1 Replies
View Related
Sep 25, 2007
I have a report that I pass parameters of a clientID. I run the report and export it to a .pdf file. I would like to be able to do this for multiple clients without manually having to enter the ID each time and exporting it.
I have thought about creating a report that calls this report so that I can pass in the clientID one at a time. The problem is trying to export each one.
Does anyone have any ideas? Thanks in advance!
View 2 Replies
View Related
Oct 30, 2007
Hi,
Can we share and schedule whole report folder(not just one report) by using management studio?
Thanks
View 1 Replies
View Related
Nov 5, 2007
Hi,
I have created bunch of reports using SSRS. Now I want to deliver all of these reports together. I can use data driven subscription in Report Manager. But that feature allows to deliver one report at a time. Can anyone tell me how to deliver all reports together?
Requirement is reports should be delivered to dirrent departments. These reports have parameterized. Can anyone tell me how to do this? at least if somebody provides sample codes I really appriciate.
Thanks
p/s ;
I found this one on MSDN. But I'm not sure whether I can change this and use for multiple reports subscription. I dont hv a good knowledge on C# or VB. Please can anyone help me to modify this? I think we can use a loop or smthing.
http://msdn2.microsoft.com/en-us/library/microsoft.wssux.reportingserviceswebservice.rsmanagementservice2005.reportingservice2005.createdatadrivensubscription.aspx
View 4 Replies
View Related
Sep 26, 2007
I'm looking for some advice on how to manage reports that use the same query in their datasets. I have multiple reports that use several datasets that are the same. If I need to make a change to one dataset, I need to remember to update the other datasets. Of course I don't always remember to do that!
Is there a way to create a dataset in a single location and then share it? I was thinking of using a View but I don't think it'll accept the parameters.
I've been cutting & pasting the entire query as I make change but I'm afraid it'll mess that up or forget to update a dataset.
How do you do it?
Any suggestions you have would be helpful.
Rob
View 7 Replies
View Related
Oct 15, 2007
Is there a way to get the Report Manager to allow a single user to
execute more than 1 report at a time? Currently, each user can only
have a single report being executed at a time. It looks like any
other reports are being queued and executed serially.
View 1 Replies
View Related
Oct 23, 2007
I'm new to developing reports using 2005 SQL Reporting Services. Is it possible to develop reports based on more than one database, (generally MS SQL)? I need to set up a dataset that includes tables from several different databases linked together so that information can be viewed together in one report.
thanks
View 9 Replies
View Related
Mar 29, 2007
We have timed-based subscriptions set up for our standard set of 10 client
reports which run monthly with the appropriate parameters set for each
of our clients. Our management has requested that we provide them with
the ability to run the set of 10 reports together at will. So we would
provide the client parameter and all 10 reports would be generated.
What is the recommended approach to accomplish this? We are using Sql
Server 2005, Visual Studio 2003 and .Net 2.0.
View 1 Replies
View Related
Nov 15, 2007
Hi,
Am using SQL Server Reporting service to generate reports.Actually i want is a reports containng two sections,How can i achieve that?
Cheers
Jan
View 7 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 3 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 1 Replies
View Related
Apr 14, 2008
Hi I need to create 6 different reports using Business Intelligence.
Therefore I have to use it 6 times
Is there a way it can be done in one go??
cheers
View 4 Replies
View Related
Feb 6, 2008
Ok,
I am writing an app that will allow a user to select various information for displaying in a report. The sql is dynamically generated when the user clicks on "Get Report". Currently, I am using a gridview with a datasource and I pass the query to the datasource and it displays in the grid view. However, our company has expressed a need to migrate reporting to SSRS.
Is there any way that I can use dynamic sql with a template report and feed the dynamic sql to it so that all I would have to do is write a single rdl or rdlc and pass it the sql?
Alternatively, is there a way to have One ReportViewer show multiple parameterized reports. Ie. User selects the report from a dropdown and then selects the parameter options from other dropdowns and when they click "get report" it loads the chosen report with the parameters?
Thanks in advance.
View 4 Replies
View Related
Oct 4, 2007
Hello and thank you for the help in advance.
I know this has to be possible maybe I am just missing somthing.
I am creating a matrix report which will compare year by year quotes to orders The issue is quotes and orders each have their own dataset. I will be pivoting on JobType which is in both datasets and spelled the same. Is there a way to do this or will I have to figure out how to union the tables? If not possible why does it allow you to name the dataset in the expression?
Thanks, Leo
View 1 Replies
View Related
Mar 23, 2007
Hi,
I'm just wondering if there is any easy way to deploy reports to multiple servers. My current issue is that I need to deploy tens of reports onto tens of production server. Does anyone know how to do that?
Thanks a lot.
Cheers,
View 1 Replies
View Related
Oct 31, 2007
Hi everyone, I'm very new to SQL and SQL Reporting Services.
However I've been given a task.
How do I save multiple reporting services reports onto a predetermined location on a users local pc? Are there tools/applications that can be used to push files onto the users local pc?
The application uses .NET but they've created reports using SQL Reporting Services. The user will select which report they want (out of 2). My task is to figure out how can we save those reports that they have selected onto their pc?
Thanks in advance
View 1 Replies
View Related
