I am looking for a resource that will speak to the process of how to create a SQL Express database within VS 2005 - create relationships within the Database Diagrams (right now it complains that it does not have a valid dbo user and that I do not have permission impersonate the dbo user - if i tel it to grant me access it gives me the same message) - what security issues need to be considered as far as the SQL Express stuff is concerned. I am also wanting to know what pieces I need to have on my Internet and Intranet web servers so that when I delpoy my .net 2.0 app that the servers will be able to deal with the SQL Express database that gets copied out there? Should SQL Express on the web server be set to windows auth or mixed mode auth? If I choose windows auth does that mean that the ISP (internet server) has to have an NT account created for my web app so that I can connect to the SQL mdf?
I guess I am just kinda struggling with the process from creation of the database to making sure that when I deploy the application that it will be available.
Well, its a bit embarrasing to have to ask such ignorant questions, but......
I've been using Oracle for a long time. And VERY occasionally I dabbled just a bit into SQL Server 2000.......
I now would like to create a database driven web application, so I downloaded the Express set. And the books online, in the hope they'd be well organized and provide simple straightforward information on how to do things.... If its there, I'm not finding it. First question: Is there SOMEWHERE online tutorial/information on specifically how to do things? Something for a user familiar with relational databases and design and such, but needing to understand specifically how THIS database product works?
For example, I managed to get the management studio express open. And in "Registered Servers" there's something called Database Engine, within which there's serversqlexpress. Can I create an instance (or whatever it is in the MS world) OTHER than sqlexpress, and do I need to? I ask because it appears sqlexpress is on my "C" drive, and I don't want it there... There appear to be system databases within sqlexpress, and I presume they'll grow... SO, do I need to get all this off to another disk? And, if so, how? Feel free to point me to the right documentation - I tried the SQL Server 2005 Tutorials, but after going through the "lesson" on SQL Server Management Studio I realized it was geared toward "how to open a window" rather than how to actually do anything... I found another topic in here that pointed to the "Getting Started White Paper", but that doesn't appear to be valid any more. It also pointed to the "Management Studio Express Primer" but that link just throws a 404 error...
And what on earth does the SQL Server Configuration Manager do? I've gotta be missing something that's obvious to the informed observer...
Was trying to open AdventureWorks when i got this error: "There is no editor available "C: Program Flies.....AdventureWorksDW_Log.LDF' Make sure the application for the file type(.LDF) is installed. How can this error be corrected? I also have some error on mdf not installed.May i know how should be the initally steps to be done inorder for me to view this database. And if i do have a database from microsoft access, what are the steps that i need to do inorder to get it export to Microsoft SQL Server Management Studio Express. Please advise as i really new to it. Thanks!
I'm at a complete loss as to how to use databases in ASP.NET. Everything seems to be set up for SQL Express, but I need to use SQL Server 2005. The SQL Server is not located on the same machine as the website. Then there are the databases I can create through Visual Studio 2005, what exactly are these? Are these local, are these via SQL Express, or do these somehow link to the database server? What does it mean to attach and detach? There are a lot of pieces here, and I don't know how they fit together. First, can someone help me with an overview of how all this fits together? Second, how can I use SQL Server 2005, and not SQL Server Express for my data and for membership, personalization, profiles, etc.? Finally, should I be able to connect to the remote SQL Server database from my home development machine? Do I need to use IIS to do this? Thanks in advance for your help, Diane
I have been running SQL Server 2005 Express with the Management Studio Express. I just downloaded and installed the Eval (Trial) version of SQL Server 2005 but have not been able to get it working. Here are a couple of questions:1. Is there a potential confict with having both versions on my machine. I don't want to uninstall express since I may have to do back to it in 180 days.2. Is there a program comparable to the Management Studio for the Eval version of SQL Server 2005?3. How do I access the Eval version? I found the folder where it installed on my C drive but don't know what to do with it.Thanks for any help you can provide.
Hi all I'm a newbie with Visual studio 2005 .Recently i installed it ,AFAIK sqlServer 2005 also is shiped with vs2005.after installing vs2005 i have the following entries in my StartMenu/All Programms/
1) Microsoft Sql Server 2005 Configuration Tools sql Server Configuration Manager Sql Server Error and usage Reporting SQL Server Surface Area Configuration
2) Microsoft Visual studio 2005 ..... ........
Apparently there isn't any ENTERPRISE MANAGER and query analyzer.? By the way in Visual studio IDE i noticed "Server Explorer" nexed to "Solution Explorer" but i didn't find any Database entry or "Create New Database" or some thing like this.!!! Could any one help me.? i want to Create Database, Tables,....
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
How do you get started? I downloaded the SQL 7 software and the sample databases, and did the start program to run the SQL Server Configuration Manager (Local), but what do you do now?
And now i'm looking for what in SQL Server 2000 used to be: Management-> SQL Server Agent-> jobs Can anyone help me find where i can add a job in SQL Express please? Thanks
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
Hi Guys, I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]? ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Hi, I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ? Thanks in advance.
I have never used MS SQL database. I usually create my database with phpMyadmin. But my clinet doesn't have this tool. And they don't have MySQL instead they have MS SQL.
Could I create the data base with phpMyadmin and output that? Then import the data into MS SQL? There is no GUI tool on the server to create tables and data entry.
Q1: Does Sql Server 2005 Express support Web/Internet to other SQL Server 2005 Express Clients or does it have to Synch across the internet to a fully installed setup SQL Server 2005 with IIS?
Q2: Does SQL Server 2005 Express support Direct Replication between other SQL Server 2005 Express clients?
In my SQL Server Express (that is installed in my Windows XP Pro PC), SQL Server 2005 Network Configuration has Protocols for SQLEXPRESS. I tried to do "Enabling CLR Integration" in my SQL Server Express: (1) If I clicked on "Surface Area Configuration for Services and Connections", I got an error "An exception occurred in SMO while trying to manage a service, (Microsoft.SqlServer.Smo) Additional information: Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). (2) If I clicked on "Surface Area Configuration for Features, I got a different error "Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required computer has the required Windows Management Instrumentation components and then try again. (SQLSAC) Additional Information: An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo). Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). Please help and tell me how I should do to get "Enabling CLR Integration" in my SQL Server Express done and how I can create SQLCLR Project in VB 2005 Express.
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area": (1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the following: Select Computer The Surface Area Configuration of this surface area of this computer or a remote computer. Specify a computer to configure: O Local computer O Remote computer Should I choose the "Local computer" or the "Remote computer" option? (2) Below the "Configure Surface Area for localhost [change computer]", I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS |-| Database Engine Service I picked => Remote Connection On the right-hand side, there are: O Local connections only O Local and remorte connections O Using TCP/IP O Using named pipes only O Using both TCP/IP and named pipes Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________ System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------ Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) ____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC. 1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class ////////////////////////////////////////////////////////////////////////////// I got the following error messages: SecurityException was unhandled Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")." Troubleshooting tips: Store application data in isolated storage. When deploying an Office solution, check to make sure you have fulfilled all necessary requirments. Use a certificate to obtain the required permission(s). If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list. Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Downloading and installing VS 2008 Express also created a Miscrosoft SQL Server folder. How do I install the SQL Server 2005 Express?The following is what I found from the HELP menu bar of the VS 2008 Express. Where can I find the sqlexpr.exe? TIA,Jeffrey
To install SQL Server Express To begin installation, double-click sqlexpr.exe. Note: SQL Server Express is available as a self-extracting executable file (sqlexpr.exe) from both the Visual Studio 2005 CD and the SQL Server Express Web site. SQLEXPR.EXE installs on x86-based computers and to the 32-bit subsystem (WOW64). For more information, see Hardware and Software Requirements (SQL Server Express)
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
I had some issues on my server and had to uninstall .Net Framework 2.0, SQL Server 2005 Express, and SQL Express Toolkit. I installed SQL Server 2005 Express and it seemed to be ok.
Then my problems all started when I tried to install SQL Express Toolkit because I needed to install DTS Wizard again, and it errors out and wouldn't let me install it. So I uninstalled everything that's listed above again.
I then tried to install SQL Server 2005 Express again, and on the second from last screen, while its listing all the components and configuring them, I get the following error as it's configuring the last component... which was the SQL Server Database Services.
TITLE: Microsoft SQL Server 2005 Setup ----------------------------------------------------------- The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
I tried to re-install the SQL Server Express another 7 times wth no luck.
If anyone can point me in the right direction I'd really appreciate it.
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) The system cannot find the path specified.
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) The system cannot find the path specified.
I use Visual Web Developer Express 2005 with SQL Server 2005 Express. With this combination I was able to create a new database.I can add tables, views etc.But no triggers....do you guys have an idea how I can add a new trigger?Please help!
