Getting The Parameter Is Incorrect For SCD Component

Feb 13, 2008

Hi,

I have looked through the forum but not found the solution.

I have a OLE DB source connected to the SCD component. I have tried to change the Data Access mode from reading the table and also a 'select * from table' SQL command in the OLE DB source editor, but neither worked.

The SCD component fails with :-


An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80070057 Description: "The parameter is incorrect.".

Error: 0xC0047022 at Extract revenue codes, DTS.Pipeline: The ProcessInput method on component "Slowly Changing Dimension" (12964) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method.

Has anyone else had a similar situation?

The SQL server verison is 9.0.2047.

View 6 Replies


ADVERTISEMENT

The Parameter Is Incorrect

Mar 31, 2008

I am getting an error the parameter is incorrect when using a parameter within a case statement. Here is my SQL:
SELECT J.Commitment, J.Vendor, A.Name, J.Category, J.Transaction_Type, J.Job, CASE WHEN J.Transaction_Type = 'AP cost' AND
J.Accounting_Date < @MonthEndDate THEN J.Amount END AS InvoicedtoDate, C.Date, C.Delivery_Date
FROM JCT_CURRENT__TRANSACTION AS J INNER JOIN
JCM_MASTER__COMMITMENT AS C ON J.DBID = C.DBID AND J.Commitment = C.Commitment LEFT OUTER JOIN
APM_MASTER__VENDOR AS A ON J.DBID = A.DBID AND J.Vendor = A.Vendor
WHERE (J.Commitment <> ' ') AND (J.Job <> ' ')
ORDER BY J.Job, J.Commitment
If I replace @MonthEndDate with a date value it will run but as soon as I run the SQL with the parameter it gives me the error the parameter is incorrect. @MonthEndDate is data type datetime.
Thanks for your help.

View 11 Replies View Related

DTS Error &#34;The Parameter Is Incorrect&#34;

May 14, 2001

Hi,

I'm having a problem with my SQL 7.0 (SP2) server running on NT4 (SP6a).
When I use Enterprise Manager on my NT4 workstation (SP6) and I try to double click a local DTS package to go into the design view I get the following error message:

Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description: The parameter is incorrect

If I log on to the actual server and run Enteprise Manager everything is o.k
It is not a permissioning problem as I'm logging in with domain Admin in both cases. Any ideas ?

Regards,

Tim

View 2 Replies View Related

DTS The Parameter Is Incorrect Error

Aug 15, 2006

I'm running SqlServer 2000 and am trying to write a DTS. For some reason I keep getting that error for my Dynamic Property Task and not sure why. I've tried giving my Package a password like was mentioned in another thread on here, but that didn't work either.

I'm trying to dynamically set a Data Source for an Excel connected, using a query.

Query:

DECLARE @directory VARCHAR(1000)
SET @directory = 'C:'
EXEC [Legacy].[dbo].[spr_GetNewestExcel] @directory

The Store Procedure:

CREATE PROCEDURE spr_GetNewestExcel
(
@directory VARCHAR(1000)
)
AS
BEGIN
DECLARE @cmdParam VARCHAR(8000)

--Temp Table that saves the output of a DOS command.
CREATE TABLE #output
(
output VARCHAR(300)
)

--Temp Table that saves the output of a "dir" DOS output, in parts.
CREATE TABLE #files
(
fileDate VARCHAR(20),
fileSize VARCHAR(20),
fileName VARCHAR(100)
)

--Sets the command parameter
SET @cmdParam = 'dir "' + @directory + '"'

--Inserts the output of the above DOS command into a table
INSERT INTO #output
EXEC master..xp_cmdshell @cmdParam

--Parses the #output table for the files with the correct extension and breaks it up into
--Date, Size, and Name.
INSERT INTO #files
SELECT
SUBSTRING(output, 0, 21) As fileDate,
LTRIM(SUBSTRING(output, 21, 18)) As fileSize,
SUBSTRING(output, 40, LEN(output))
FROM #output
WHERE output LIKE '%.xls'

--Displays the values
SELECT TOP 1
CASE
WHEN SUBSTRING(@directory, LEN(@directory), 1) = '' THEN @directory + fileName
ELSE @directory + '' + fileName
END AS fileName
FROM #files ORDER BY fileDate DESC

DROP TABLE #output
DROP TABLE #files
END



The Stored Procedure runs great on its own, it displays a list of filenames with the .xls extension in the desired directory, which is what I want. It should put the first in the list((if there is more than one)) as the datasource, but it doesn't.

When I go to the "Add/Edit Assignment" window for it, and push "Refresh" to preview it, it gives me a "The Parameter Is Incorrect".

Any help would be much appreciated, this has had me stumped for quite some time.

peace,
CR

View 7 Replies View Related

Help With Incorrect Syntax (input Parameter)

Nov 14, 2006

Hi
Help with syntax, I get the error in the line: myDA.Fill(ds, "t1")
Function GetProductsOnDepartmentPromotionPaging(ByVal departmentId As String)
Dim myConnection As New _
SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim myDA As New SqlClient.SqlDataAdapter _
("MM_SP_GetProductsOnDepartmentPromotion", myConnection)
 
' Add an input parameter and supply a value for it
myDA.SelectCommand.Parameters.Add("@DepartmentID", SqlDbType.Int, 4)
myDA.SelectCommand.Parameters("@DepartmentID").Value = departmentId
Dim ds As New DataSet
Dim pageds As New PagedDataSource
myDA.Fill(ds, "t1")
pageds.DataSource = ds.Tables("t1").DefaultView
pageds.AllowPaging = True
pageds.PageSize = 4
Dim curpage As Integer
If Not IsNothing(Request.QueryString("Page")) Then
curpage = Convert.ToInt32(Request.QueryString("Page"))
Else
curpage = 1
End If
pageds.CurrentPageIndex = curpage - 1
lblCurrpage.Text = "Page: " + curpage.ToString()
If Not pageds.IsFirstPage Then
lnkPrev.NavigateUrl = Request.CurrentExecutionFilePath + _
"?Page=" + CStr(curpage - 1)
End If
If Not pageds.IsLastPage Then
lnkNext.NavigateUrl = Request.CurrentExecutionFilePath + _
"?Page=" + CStr(curpage + 1)
End If
list.DataSource = pageds
list.DataBind()
End Function
 
Best Regards
Primillo

View 2 Replies View Related

DTS Schedule Error - Parameter Is Incorrect

Aug 7, 2000

Hi all Thanks in advance ..

I have some DTS Shedules on SQL 7.0 SP1 . All shcedule was running properly . When I made some changes in an SQL Task and saved it the shedule starts to fail. It gives me an error "DTS RUN LOAding Error- 2147024809(80070057)Ptovider Error (0) Error String : The parameter is incorrect etc)
But All my DTS is running smoothly without error Only the schedule fails.
Please help me.

View 6 Replies View Related

Incorrect Syntax Near ',' Using A Multi-value Parameter

May 1, 2007

I created a report in Reporting Services 2005 where I added multi-value parameters. When I run my report, and try to select more than one parameter, I get an error: Incorrect syntax near ','

View 1 Replies View Related

Incorrect Parameter In Desing Mode

Dec 27, 2006

WHERE (Cono = @Company) AND (DATEPART(month, PaymentDate) = @Month) AND (DATEPART(year, PaymentDate) = @Year)

If I run the job in preview mode I enter the parameter data as requested and it runs correctly. When I go back to design mode and run the query using the ! (the parameter box pops up with the data I entered in preview mode) I get an error message - The Parameter is incorrect.

I've tried setting the parameters to every combination of string/interger I can think of.

What is happening here?

View 2 Replies View Related

Replication Snapshot Incorrect Parameter

Jan 26, 2007

After using the wizard to create a very simple snapshot. I keep receiving this message:

Replication-Replication Snapshot Subsystem: agent D700PT106-gdalcd_10-test-3 failed. The parameter is incorrect. The step failed.

Anybody have any idea what this means.

View 1 Replies View Related

The Parameter Is Incorrect. (Microsoft OLE DB Provider For Visual FoxPro) After SP1

May 1, 2006

Having installed SP1, my SSIS packages using the OLE-DB Provider for Visual Foxpro no longer work. Using the latest version obtained from here:

http://www.microsoft.com/downloads/details.aspx?FamilyId=E1A87D8F-2D58-491F-A0FA-95A3289C5FD4&displaylang=en

When attempting to create one SSIS from scratch, the message thrown is:

"The parameter is incorrect. (Microsoft OLE DB Provider for Visual FoxPro)."

The radio button option of "Copy data from one or more tables or views" and then selecting the "Next >" throw the error.

It has to be the SP1 causing the problem because nothing else changed on the Server and everything was working fine prior to this.

Microsoft, any feedback on this??

View 25 Replies View Related

Error Incorrect Syntax Near ',' When Exec Sql With Multi Value Parameter

Apr 3, 2008

I already used temptable, it works fine in SQL Server but doesn't work in Visual Studio. (it returns me "incorrect syntax near ',').

Here is my sql:


SET @sql = 'SELECT
RMI.Response_Date,
RMI.Master_Incident_Number,
RMI.Jurisdiction,
RVA.Radio_Name,
RVA.Response_Number,
RMI.Division,
RMI.Battalion,
RMI.Address,
RMI.Call_Disposition,
RMI.Cancel_Reason,
RMI.Problem,
RMI.Time_CallEnteredQueue,
RVA.Time_Enroute,
RVA.Time_ArrivedAtScene,
RG.Region,
RN.District ' +
' INTO RPT_PRIME_JOB_DTL ' +
' FROM ' + @server_name + 'Response_Master_Incident RMI ' +

'LEFT OUTER JOIN ' + @server_name + 'Response_Vehicles_Assigned RVA
ON RMI.ID = RVA.Master_Incident_ID ' +

'LEFT OUTER JOIN AKSDCSVR01.CAD_Lookup_Tables.dbo.Radio_Name RN
ON RVA.Radio_Name = RN.Radio_Name Collate SQL_Latin1_General_CP1_CI_AS ' +

'LEFT OUTER JOIN AKSDCSVR01.CAD_Lookup_Tables.dbo.Region RG
ON RMI.Jurisdiction = RG.Jurisdiction Collate SQL_Latin1_General_CP1_CI_AS ' +

'WHERE ' +
' RG.Region = ''' + @region + '''' +
' AND RN.District IN (SELECT Item FROM dbo.StringArrayIntoTable(''' + @district + ''', '','') ' +
' AND (RMI.response_date >= ''' + CONVERT(VARCHAR(10), @date_from,111) + '''' +
' AND RMI.response_date <''' + CONVERT(VARCHAR(10),@date_to+1,111) + ''')' +
' AND RVA.Radio_Name LIKE ''PD%'''

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EXEC (@sql)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SELECT *
FROM RPT_PRIME_JOB_DTL


Thank

View 3 Replies View Related

[LOG] Unable To Read Local Eventlog (reason: The Parameter Is Incorrect)

Apr 12, 2007

This error message gets into my SQL Agent Error Logs every couple of seconds after the clusters migrated from the EMC Clariion CX500 to the CX3-80.

OS €“ Win 2003
SQL €“ SQL Server 2005 SP1 (9.00.2047.00)

View 3 Replies View Related

Multi-Value Parameter Error: Incorrect Syntax Neat The Keyword Else

Dec 11, 2007

Hi all,

Could someone please help me!!! I am using a multi-value parameter in SQL 2005 reports and am getting the following error message:


An error has occured during report processing.
Qiery execution failed for dataset
an expression of non-boolean type specified in a context where condition is expected, near ','
Incorrect syntax near keyword else.

The multi-value parameter works when it isn't run in the if, else clause i checked the where clause with a single paramter and it works OK. I don't understand what is causing this problem but I really need to fix it. Here is my query.

if @job_SubRep_ProjNo_param = '0'

Begin
select Job_Job_No as job, Job_Job_Name as Job_title,
cast(Job_Total_Fee as float) as fee,
employee_first_name + ' ' + employee_surname as jl_name,
cast(Job_Percent_Complete as float) as percentcomplete,
cast(Job_Work_Done as float) as workdone,
cast(Job_Invoicing as float) as job_Invoicing,
job_WIP,
Job_Expenditure as timecost,
job_project_no,
Job_Profit_Loss,
cast(Job_Hours as float) as hours,
job_expenses
from job_tbl
inner join project_tbl on job_project_no = project_no
inner join employee_tbl on job_jl_empno = employee_no
where project_pl_empno = @pl_employeeNo or job_jl_empno = @jl_subRep

end
else
select Job_Job_No as job, Job_Job_Name as Job_title,
cast(Job_Total_Fee as float) as fee,
employee_first_name + ' ' + employee_surname as jl_name,
cast(Job_Percent_Complete as float) as percentcomplete,
cast(Job_Work_Done as float) as workdone,
cast(Job_Invoicing as float) as job_Invoicing,
job_WIP,
Job_Expenditure as timecost,
job_project_no,
Job_Profit_Loss,
cast(Job_Hours as float) as hours,
job_expenses
from job_tbl
inner join project_tbl on job_project_no = project_no
inner join employee_tbl on job_jl_empno = employee_no
where job_project_no in (@job_SubRep_ProjNo_param) or job_jl_empno = @jl_subRep

Thanks in advance!!

Katie

View 7 Replies View Related

Incorrect Syntax Exception When Prefacing SP Names With Dbo. And Named Parameter Issues

Aug 17, 2006

We're currently trying to evaluate SQLJDBC 2005 1.1 June CTP's support for database mirroring automatic failover. Unfortunately we're getting unexpected exceptions for calls that work fine w/ jtds that our blocking our ability to perform these evaluations without us making substantial changes to our codebase.

The first issue is with the name used when calling a stored procedure -- SP names that start with "dbo." give us the following error:

com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near '.'. src:{call dbo.xyz(?,?,?,?,?,?,?,?)}

The call will work if we change the SQL statement to {call xyz(...)}. I don't understand why we would need to do this, especially given that the documentation for the driver shows call statements with the "dbo." prefix.

We're also having problems using named parameters with stored procedures (for both in and out parametes). Our code has parameter names of the form "@param" as is standard with TSQL (and is required when using jtds). However, this won't work with SQLJDBC -- it only seems to accept parameter names w/o the leading "@". Why is this so?

Finally, we were able to cause a NullPointerException within the driver due to an incorrectly built Properties object that contained an Integer for loginTimeout instead of a String:
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at java.util.Properties.setProperty(Properties.java:128)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.fixupProperties(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.mergeURLAndSuppliedProperties(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
While this was due to a bug in our code I would think that such common errors would be better handled.

View 6 Replies View Related

The Component Metadata For Component DataReader Source (1113) Could Not Be Upgraded To The Newer Version Of The Component.

Oct 26, 2007

Hello,

I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.

Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.

Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)

Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.


Please advice.
Thank you.





View 7 Replies View Related

The Component Metadata For Component DataReader Source Could Not Be Upgraded To The Newer Version Of The Component.

Jan 23, 2007

Hi,

I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.

Package works from my computer. But when I execute it on the server as a SQL Agent job, I get







The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.  

I copied the mdb file to a folder on the server which my packages have no problem reading data from.

My packages run under the same domain account as defined in proxies.

Appreciate a help.

Gulden

 

 

View 4 Replies View Related

SQL 2000 Transaction Log &"incorrect Parameter&"

Jun 13, 2006

Ok, I'm somewhat familiar with Exchange, but I'm totally new to SQL.

Here's my problem:

Each night I have a batch file shut down the SQL processes. I then copy the relevant files to another hard drive for back up purposes. I have 2 databases. The first database file and transaction log goes just fine and both files copy. The second database file goes just fine as well, but the transaction log returns "incorrect Parameter". It does this even if I simply try to right click & copy the file in windows with the SQL processes down so I've ruled out it being the syntax of my batch file.

The .LDF for this database is huge (to me at least), it weighs in at +50GB's and is growing 2-4 GB's a week. Is it safe to simply delete this transaction log and start a new one since I have a good backup of it's associated database? I'm not exactly sure what caused the incorrect parameter errors either. I inherited this problem so my background info is limited.

Any help is greatly appreciated!

Thanks in advance!

View 10 Replies View Related

DTS Error - Error String: The Parameter Is Incorrect.

Nov 28, 2001

HELP! im running this sql and get the following error - If i manually start the dts package it is fine....also if i use DTSrun from my pc it also works ok..

USE master

EXEC xp_cmdshell 'DTSrun /S BTN_AH_TWB02NEW /U pkent /P clarke05 /N pbk'


output
DTSRun: Loading...

Error: -2147024809 (80070057); Provider Error: 0 (0)

Error string: The parameter is incorrect.

Error source: Microsoft Data Transformation Services (DTS) Package

Help file: sqldts.hlp

Help context: 713




(9 row(s) affected)

View 2 Replies View Related

Use Of A SSIS Variable Of Type “Object� Inside Script Component And Task Component

Mar 16, 2007

In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
€¦€¦€¦€¦€¦€¦€¦.
€¦€¦€¦€¦€¦€¦€¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!

View 3 Replies View Related

A Custom Component For Use As A VIEW In SSIS- Is It Possible To Create One MERGE Like Component With More Than 2 Inputs

Aug 13, 2007

Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)

View 4 Replies View Related

Reference To Preceeding Component From Custom Dataflow Transformation Component

Mar 30, 2006

I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.

I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.

Does anyone have any suggestions?

TIA . . . Ed

View 7 Replies View Related

Serious Script Component Bug - Clears Out All Code Inside Component

Nov 27, 2007



No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.

I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.

And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.

I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.

I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.

I can reproduce this on 2 different computers.

Anyone experience this problem ? Any idea how to stop it ? Or debug it ?


Here is a slimmed down code sample of what causes the error :


Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class

View 4 Replies View Related

Incorrect Syntax Near The Keyword 'from'. Line 1: Incorrect Syntax Near ')'.

May 27, 2008

This is the error it gives me for my code and then it calls out line 102.  Line 102 is my  buildDD(sql, ddlPernames)  When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one.  Could it not like something in my sql select statement.  thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged
Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue
sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _
& "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0"))
buildDD(sql, ddlPerNames)
 
End Sub

View 2 Replies View Related

Incorrect Syntax Near The Keyword 'SELECT'.Incorrect Syntax Near The Keyword 'else'.

May 22, 2008

What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT
2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end
3 FROM abc
4
Anyone can help? Thanks a lot.

View 5 Replies View Related

Enable Error Handling When Writing Custom Source Component /custom Error Handling Component.

Apr 21, 2006

1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,

2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.

Thanks in advance.

View 1 Replies View Related

RS 2005: Stored Procedure With Parameter It Runs In The Data Tab But The Report Parameter Is Not Passed To It

Feb 19, 2007

Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.

I have to display the result of a parameterized query and I created a SP that based in the parameter does something:

SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''

AS
BEGIN

declare @slqSelectQuery nvarchar(MAX);

SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end

Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.

Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried

the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!

What is wrong? What I forgot??

Thankx for any help!
Marina B.





View 3 Replies View Related

Reporting Services :: Preview Has One Extra Parameter Than Parameter List - SSRS

Aug 21, 2015

I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter. 

How do I know , when this parameter is coming in the preview ?

View 5 Replies View Related

Reporting Services :: Multi-value Parameter Not Passing In Subreport Parameter List

Jul 29, 2015

I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.

Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..

=join(parameter!user_id!value,",") which pass selected value to chart 

And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .

View 2 Replies View Related

Default Parameter Value Is No Longer Part Of Cascading Parameter In SSRS 2005?

Jan 30, 2007

Hi,

I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.

I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.

Parameter 1
available values: from query
default values: non query (specify a value "<None>")
Parameter 2
available values: Non query (no value specified)
default values: from query (based on Parameter 1)

It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.

Is this a SSRS 2005 bug? is there any other work arounds or suggestions?

Thanks.

Kong

View 6 Replies View Related

How To Use Default Parameter Values With A Date Parameter From A Cube/Reducing Parameters

Oct 15, 2007



Hi,

I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.

My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?



Other question :

Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.


Thanks !

JF

View 7 Replies View Related

Reporting Services :: Share Point List Data Set Parameter Allow Null In Multivalue Drop Down Parameter

Aug 28, 2015

my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you  can not select null in multivalue parameter.How can i do it. i am using share point list.

View 3 Replies View Related

OLAP Datasource: Second Parameter List To Be Filtered Based On The First Parameter

Apr 17, 2008

Does anyone know if this is possible right out of the box in SSRS 2005 against an OLAP data source?


I have several parameters. My second parameter is to be filtered based on the first parameter (kinda like cascading), but how do I do this against an OLAP data source? Lets say I have param1 and param2 in a dataset. I want Param2 to show the locations only based on what I select in Param1.
Same but a little different: I have Parameter1 and then my second parameter (Param2) is a boolean (True/False). I want to show Parameter 3/Paramater 4 based on selection of Param2 (So, if true, show Param3, if false, show Param 4) and remember we are doing this in a sequence.
Can you do this thru SSRS? Any help would be great.
Thanks for your time in advance.
Kent

View 2 Replies View Related

Is It Possible To Dynamically Populate A Parameter List With Values Based On Another Parameter Value?

Aug 11, 2005

Is it possible to fill a parameter list with values based on another parameter value?
Here's what I have so far (which hasn't worked)...
I'd like to generate a report listing information for a student.  The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school.
I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table).
I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school.
Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up...
The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'.
The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID".  Forward dependencies are not valid.
...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter?
Any help you can give me would be great!!  Thank you

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved