MS SQL Server :: Getting Tons Of Log In EventLog After Installing SQL Server 2005 And Client

Error - Installing Client Tools - Sql Server 2005

Jan 4, 2007

Hello

I am trying to install client tools on my desktop and I am getting the following error :

Edition Change Check (Warning)

Messages
Edition Change Check

To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005,
you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.

This error , I am have seen in the logs.

The installation wizard is closing down with the above log error.

Thanks

View 3 Replies View Related

Error - Installing SQL Server 2005 Client Tools

Jan 5, 2007

Hello

I am trying to install sql server 2005 client tools and I get the following error:

Error code 2356 : Could not locate cabinet in stream : sql.cab

How can I go about this

Thanks

View 5 Replies View Related

Problems Installing SQL 2005 Client Tools

Mar 13, 2008

HI
I have recently installed a copy of SQL server 2005 on to a windows 2003 server. During the install I selected to install the client tools (management studio and all that) all seemed to install ok no errors but after the install there is no management studio in the start menu. I have tried uninstalling the client tools and reinstalling them again I have also tried to launch management studio by browsing to the SqlWb.exe but the program fails to initialise any ideas?

(both SQL and Windows are at SP2)

Thanks
Jon

View 2 Replies View Related

Error Installing SQL 2005 Client Tools On Windows Vista Ultimate

Feb 29, 2008

Hi,

I am getting the following error:

0:Watson 1:1304 2treamSupportFiles 3treamBinaryToDisk
4:5 5:tyukonsqlsetupdarwinsqlcastubstreamca.cpp 6:238
7qlcastub.dll 8qlrun.msi

While installing "SqlRunTools.msi" on a Microsoft SQL Server 2005 Developer's Edition Disc 2 on Windows Vista Ultimate.

I am trying to install the Sql Server 2005 Client Tools, Enterprise Manager, Query Analyzer, on Windows Vista Ultimate.

Any ideas as to what is causing this error and how to fix it?

Thanks,

Mark

View 12 Replies View Related

Warning Messages && Failure Installing MSSQL 2005 Enterprise Client Tools

Jul 5, 2006

I am trying to install the client tools for management purposes only on a IBM T42 laptop which meets all the hardware and software requirements listed on MS support including the HCL list, the Readme, the forums and MSDN but the install still shows the following log messages when the install fails.

AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.

(I am an adminsistrator on this machine)

Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.

Property(S): SupportedProcTypeMessage = This Microsoft SQL Server Native Client package is not supported on the current processor type.

Any help would be appreciated.

View 3 Replies View Related

Installing IIS After Installing SQL Server 2005 And Visual Studio 2005 Help Requested!

Aug 31, 2007

Hi all, Im new here so il start with a little introduction of myself, My name is Arjan im 19 years old from Holland, and i work for a company to compleet my ICT Education.

My situation:

My boss gave me a server with server 2003 standard and Sql server 2005 and visual studio 2005 installed already, he asked me if i could figure out how the 'new' reporting services work, Im pretty new to SQL and the reporting service but i figured out i had to install asp.net / frameworks and IIS.

So right now i wanna start the Reporting Services Configuration Manager and i get an error that says 'Invalid namespace' and when im trying to approach by using my browser i get 'page not found' so obviously their is Alot wrong. I asked my boss if i could not reinstall everything and do it in the correct order (IIS / ASP.net / Frameworks before installing SQL server 2k5 but that was not an option because we dont seem to have the cd's anymore.

The server is not connected to any network or the internet.

My Question:

Is their any way to fix this? and if yes could anyone tell me where to start

Thanks in Advance!

ps if their is information or logs that u need in order to help me just say so :-)

-Arjan

View 1 Replies View Related

Sql 2005 Error: Unable To Read Local Eventlog (reason: 87).

Oct 10, 2005

on the same machine both 2000 and 2005.

View 13 Replies View Related

Installing SQL Server Standard Edition 2005 After Installing SQL Server Express 2005

Feb 14, 2007

Hi

I have installed SQL Server Express 2005 on my machine.

I want to install SQL Server Standard Edition 2005 on my machine to check new services it has.

Can these 2 Editions coexist with each other, or any troubles you think might encounter?

Thanks

View 5 Replies View Related

What Is The System Requirement Installing Ms Sql Server 2003 Client Version?

Sep 6, 2006

compare to ms sql 2000, the newer version seems to be slow when i tryto open or modify a table. is this a demerit of the newer vesion or mymachine problem?

View 4 Replies View Related

Problem Installing SSQL Server 2000 Client Tools

Sep 13, 2007

Hi,

I'm trying to re-install SQL Server 2000 Desktop Engine andSQL Server client tools. I have succesfully re-installed the desktop engine,but I am getting the following error message when attempting to re-install theclient tools.

"Setup has detected an existing client tools only installation.
Please use the maintenance mode to add client components"

Unfortunately the Upgrade/Add/Remove option is greyed out as
an install option.

I attempted the registry hive rebuild option and the install appeared
to succeed. However, I cannot access any tools (Enterprise Manager
comes up with the message "The selected file cannot be found").

At this point, the desktop engine appears in Add/Remove programs
Window, but no other SQL Server components.

Any help very much appreciated!

Eric Yeoman.

View 1 Replies View Related

Installing SQL Server Native Client Requires Administrator Rights

Jun 26, 2007

Hi All,
We're deploying an app. using a MSSQL Server 2005 (Std. Ed.).
In order to install an ODBC driver for the DB, we've made the installation of Sqlncli.msi part of the package.
It will not run - unless user has Admin priv.s on the klient PC targeted.
Does any one have any experience w. other ways of installing the sql native client (like MDAC) - og just an idea about circumventing the Admin rights problem?

Regards

View 1 Replies View Related

SQL Server 2000 Requires Explicit Declaration Of Data Types In Client App After Installing A Certain HotFix

Jun 15, 2004

I think I may have figured out the solution to my recent conundrum with SQL Server 2000 that had me stressed and depressed over the last couple of days. In a nutshell, after a HotFix was installed on a SQL2K database server I have space on, I was unable to perform INSERT or UPDATE queries on database table of type TEXT, when trying to either create or modify records with more than 4,000 characters of data. While it was frustrating as heck, it seemed too rigid to be random, so I did some snooping.

The HotFix was intended to solve a known problem of not being able to run UPDATEs against TEXT fields, but in so doing, caused another headache entirely: http://support.microsoft.com/?kbid=839523

Apparently this is a semi-known problem, in that a certain HotFix forces SQL Server 2000 to be a lot more stringent in requiring explicit declaration of data types and data lengths for parameters in stored procedure. In my client code, I was initially using the overloaded constructor of the SqlParameter object that took as arguments only the parameter name and a value, without specifying a value from the SQLDBType enumeration or length of the parameter (which in my case, needs to be TEXT and 16 (or 2147483647), respectively):

System.Data.SqlDataAdapter.InsertCommand.Parameters.Add(new SqlParameter("@parameterName",parameterValue);

It appears that after the HotFix is installed, if the client doesn’t syntactically set the type and length of data for a parameter, SQL Server and/or .NET will default to a type of NVARCHAR, which has the 4,000-character limit. This all makes sense. I’m going to now need to modify the code to straight out declare what’s going in the SPROC:

System.Data.SqlDataAdapter.InsertCommand.Parameters.Add(new SqlParameter("@parameterName",SqlDbType.Text);
System.Data.SqlDataAdapter.InsertCommand.Parameters["@parameterName"].Value = parameterValue;

It’s a minor change, and it sucks that I have to make it after the code had worked flawlessly over several thousands executions over several months, but c’est la vie! Better thay than have to rebuild my DB from scratch or switch to a new server. Changing the client code evidently is the only known fix at this time: http://support.microsoft.com/default.aspx?scid=kb%3ben-us%3b827366

View 1 Replies View Related

How To Automate TONS Of Lookups

Apr 10, 2008

OK I have this table I am grbbing from Oracle and I need to take selected columns and do a value lookup against another table: IE Here is a list of fields I get from Oracle:

Code SnippetENTRY_ID
SUBMITTER
CREATE_DATE
ASSIGNEE
LAST_MODIFIED_BY
MODIFIED_DATE
STATUS
SHORT_DESCRIPTION
CATEGORY
TYPE
ITEM
SCHEMA_NAME
SCHEMA_KEYWORD
ID
FULL_NAME
USERNAME
PAGER
PAGERPIN
PAGING_METHOD
RECORD_TYPE
GROUP_ID
GROUP_ALIAS
APPLICATION
NOTIFICATION_SERVICE
ARS_GROUP_NAME
GROUP_TYPE
AUDIT_TRAIL
FULL_NAME_
RESPONSIBILITY
PAGER_EMAIL_ADDRESS

Now I need to do a value lookup on these fields:

Code SnippetSTATUS
RESPONSIBILITY

In this example it is only 2 but in other conversions it could be 20 or more... Now here is my select statement for each Field (The ? being the FIELD from before IE Status or Responsibility):

The is for Status:

Code Snippet
SELECT VALUE AS STATUS_VALUE
FROM Field_Values
WHERE (NAME = 'Project Name') AND (ENUMID = ?) AND (FIELDNAME = 'Status')

This is for Responsibility:

Code SnippetSELECT VALUE AS RESPONSIBILITY_VALUE
FROM Field_Values
WHERE (NAME = 'Project Name') AND (ENUMID = ?) AND (FIELDNAME = 'Responsibility')

So for this the way I am doing it now is I have 2 "Lookup" Components setup... It works fine... However as I said when I get say 20 or so it gets really tiresome. I was wondering if I could feed it a EXCEL or XML file saying these are the fields that need a value lookup where:

FIELD - Project - FIELDNAME VALUE - OUTPUT VALUE

So with this example I would have a file saying something like this:
STATUS - Project Name - Status - STATUS_VALUE
RESPONSIBILITY - Project Name - Responsibility - RESPONSIBILITY_VALUE

Then it runs whatever and returns the *_VALUE for each row it goes through... Any suggestions?

View 12 Replies View Related

Installing Sql25k Client Without Using CD/DVD?

Nov 16, 2006

Hi everyone,

We've found some problems when trying such thing. It seems that is compulsory to do via own CD/DVD.

Any comment would be very appreciated.

Thanks in advance,

enric

View 4 Replies View Related

Installing Sql25k Client Without Using CD

Nov 14, 2006

Hi everyone,

We've found some problems when trying such thing. It seems that is compulsory to do via own CD/DVD.

Any comment would be very appreciated.

Thanks in advance,

View 1 Replies View Related

Installing Sql 6.5 Client On 2000 Machine

Mar 26, 2001

i am trying to install SQL 6.5 client on 2000 box. but the installation wants to install an SQL 6.5 SERVER on it. Is there something im forgetting?
is there a way and if so how? if not, is there a workaround with out upgrading the sql 6.5 server.

Thank you in advance

View 1 Replies View Related

Problems Installing Client Tools And BOL

Jul 26, 2006

I have tried several times to install SQL Server 2005 Enterprise Edition on a cluster. SQL Server, SQL browser and SQL Agent installs ok but when the installer start to setup Books on line and client tools (BIDS) and SS Management Studio the installer stops and end the installation.

I get this error (from SQLSetup0021_WBOGSQL01_Core(Local).log)

Remote setup(s) are ready
Notify package to begin: 29539
Notify package to commit: 29539
Waiting for remote setup(s) to get ready to end
Remote setup(s) are ready
Notify package to end: 29539
Error: Action "UninstallForRS2000Action" failed during execution. Error information reported during run:
Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:
Condition "rs was successfully upgraded." returned false.
Installation of package: "patchRS2000" failed due to a precondition.
Waiting for actions from remote setup(s)
Remote setup(s) are ready
Notify package action is determined: 0
Running: InstallToolsAction.10 at: 2006/6/23 2:3:42
Error: Action "InstallToolsAction.10" threw an exception during execution. Error information reported during run:
Target collection includes the local machine.
Fatal Exception caught while installing package: "10"
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlchainingsqlprereqpackagemutator.cpp
Compiler Timestamp: Tue Aug 9 01:14:20 2005
Function Name: sqls::SqlPreReqPackageMutator::modifyRequest
Source Line Number: 196
---- Context -----------------------------------------------
sqls::InstallPackageAction::perform
sqls::InstallPackageAction::getReferringPackageId
ch::installA
WinException caught while installing package. : 1603
Error Code: 0x80070643 (1603)
Windows Error Text: Fatal error during installation.
Source File Name: packageengineinstallpackageaction.cpp
Compiler Timestamp: Fri Jul 1 01:28:25 2005
Function Name: sqls::InstallPackageAction::perform
Source Line Number: 167
---- Context -----------------------------------------------
sqls::InstallPackageAction::perform
sqls::InstallPackageAction::getReferringPackageId
ch::installA
Cancelling setup due to failure on remote machine: 1603
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_WBOGSQL01_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0021.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_WBOGSQL01_.NET Framework 2.0 LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0021.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_WBOGSQL01_.NET Framework Upgrade Advisor.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0021.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_WBOGSQL01_.NET Framework Upgrade Advisor LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0021.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_WBOGSQL01_.NET Framework Windows Installer.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0021.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_WBOGSQL01_.NET Framework Windows Installer LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0021.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2006/6/23 2:6:2
Message pump returning: 1603

Why does the installation process stop there and what can I do next?

Best regards

Andres

View 2 Replies View Related

Installing SQL 6.5 And 2000 Client Utilities On The Same Machine

Aug 24, 2004

Can I install the client utilities for Microsoft SQL versions 6.5 and 2000 in the same machine?

Please, provide me with any information or links in this matter.

View 5 Replies View Related

Need To Execute Dtsrun Without Installing Client Tools.

Jul 20, 2005

I have an application that needs to execute dtsrun from a remotemachine. Basically I have a batch file on the remote box, whichhandles the execute. This works fine on a machine with client toolsinstalled. My problem is that I can't install the client tools on theremote box.Does anyone know what I need to install on the remote machine to getthis to execute, without installing the client tools? I've triedcopying dtsrun.exe and dtsrun.rll, but that didn't work

View 1 Replies View Related

Installing MS Visual Studio 2005 (PE). On Vista X64 (BE) Running MS SQL Server 2005 (DE) X64

Feb 10, 2008

Hi, I am running SQL Server 2005 x64 DE on Vista x64. I installed MS VS 2005 Pro. Edition. During the setup of VS, I did a custom install, un-checking the SQL Express addition box. After installation, I received errors that indicated the SQL Express did not install. Even though I do not have SQL Express installed on my machine, MS Update says that I need SQL Express SP2. My SQL DE is up to date with SP2 and MS Update indicates as "optional" that I need SQL SP2.

Is SQL Express a necessity for VS Pro? If not, why is MS Update indicating that I need SQL Express SP2? In addition, why is MS Update telling me I need SQL SP2 when it is already installed?

Note: I installed SQL SP2 manually, not through MS Update. This makes me believe that MS Update is not detecting it.

Thanks in advance to anyone who can help,

Abel

View 3 Replies View Related

Installing SQL Server 2005 Standard Edition When Express 2005 Is Already On Server

Sep 30, 2007

I need to install SQL Server 2005 Standard Edition on a new Windows Server 2003 machine that has SQL Server 2005 Express Edition installed by a backup application (Backup Exec). Will I need to uninstall the express edition in order to install the standard edition? Can the two coexist as separate instances or will the standard edition installation simply upgrade the express installation?

Thanks

View 3 Replies View Related

Installing Oracle Client On SQL2k Production Cluster

Mar 20, 2002

if you were running a SQL2k cluster, multiple named instances, would you let someone install the oracle client so DTS packages could be setup ?

I am a bit apprehensive about putting this oracle client on my production box. would appreciate any experience people have in this area.

thanks
Carol

View 2 Replies View Related

Installtion Program Dies When Installing Native Client

Jul 24, 2007

it's my laptop, i try to install sql server 2005. the installation program dies at the first stage.
the program seem cant finish the Native Client installation and stops for ever. theres no error msg.
the installation program works well on my desktop. does anyone knows what goes wrong?

View 6 Replies View Related

Sql Server 2005 (business Intelligence Development Suite ) Problem Installing Sql 2005 On Vista (vs 2008)

May 7, 2008

I installed sql server 2005 sp2 including business intelligence development suite , however I got a message
some client components not compablitable .This morning I searched my programs and found that I have new
visual studio 2005 on my computer (before I just had vs 2008) as well as business intelligence
developer (which does not work) It seems I I would like to get rid of vs 2005 also
fix business intelligence studio . Previously I deleted vs 2005 express off my computer........(I have vista
and I would only like to keep tools meant for sql standard 2005 reporting services etc
here is a list of my sql sp2 install package
By the way I doubled clicked sql_tools.msi and did not run as administrator
Does that make a difference? I wonder if this is a problem with vs 2008 and sql 2005......

Time: 05/06/2008 20:49:23.437
KB Number: KB921896
Machine: BILLPREC690
OS Version: Professional (Build 6000)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No

**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed

**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.00.1399.06 x86
Database Services (MSSQLSERVER) ENU RTM 2005.090.1399.00 x86 STANDARD
Analysis Services (MSSQLSERVER) ENU RTM 2005.090.1399.00 x86 STANDARD
Reporting Services (MSSQLSERVER) ENU RTM 9.00.1399.00 x86 STANDARD
Notification Services ENU RTM 9.00.1399.00 x86 STANDARD
Integration Services ENU RTM 9.00.1399.00 x86 STANDARD
SQL Server Native Client ENU 9.00.3042.00 x86
Client Components ENU RTM 9.00.1399.06 x86 STANDARD
SQLXML4 ENU 9.00.1399.06 x86
Backward Compatibility ENU 8.05.1054 x86
Microsoft SQL Server VSS Writer ENU 9.00.1399.06 x86

**********************************************************************************
Products Disqualified & Reason
Product Reason

**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
SQLWriter Microsoft SQL Server VSS Writer Service 2700

**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Reboot Required
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 3010
Error Description :
----------------------------------------------------------------------------------
Product : Analysis Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixOLAP9_Hotfix_KB921896_sqlrun_as.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Reporting Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Notification Services
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixNS9_Hotfix_KB921896_sqlrun_ns.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Reboot Required
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 3010
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 1054
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------

**********************************************************************************
Summary
Success, Reboot Required
Exit Code Returned: 3010

View 2 Replies View Related

Need A SQL Server 2005 Client For MAC

Oct 2, 2007

Does anybody know of a software which can be used on MAC to connect to a sql 2005 database?Premal.

View 4 Replies View Related

Sql Client In Sql Server 2005

May 30, 2006

HI allGurus i am struck up in sql 2005.I am new to sql 2005.I have my serverinstalled on one machine.Now what do i download so that i am able toregister it.Now i want to connect to that machine thru enterprise manager or clientlike we do in sql server 2000 thru query analyzer..Will sql 2005 express help.?Please helpRegards

View 2 Replies View Related

Eventlog

Jul 19, 2006

Hello everybody,

is it possible to add entries to Windows EventLog from Sql Server Trigger? if yes, could any body tell me how?

Best Regards

View 8 Replies View Related

SQL Server 2005 Client Tools

Oct 15, 2007

What is the quickest and easiest way to use client tools for 2005 like 2000....
?

View 4 Replies View Related

SQL Server 2005 Client Access

Jan 24, 2008

Hi there

If I give the user access dbo on 1 of the database, when he logon using SQL Server Management Studio for running query etc, can he only see his database instead of other as well system database?

Is there any best practise in term of setting the SQL client for 2005?

Thanks

View 2 Replies View Related

SQL Server 2005 Native Client...

Jun 19, 2007

Do I need to install SQL Server 2005 Native client drivers on the servers that contain applications that make connections to the new SS2005 db server? My understanding is that this driver is backward compatible with SS 2000... Can I have both installed on the same server, and then create and ODBC driver for either?

Thank-Dave

View 3 Replies View Related

SQL Server 2000 Vs 2005 Client..

Feb 22, 2008

Hi

I have SQL Server2005 client in my system,I am able to connect SQL Server 2000,but I am unable to create DTS packages.2005 client not at all showing Local packages icon to create package.

any body experianced with this Please guide me ragarding.

View 1 Replies View Related

Need Help Sql Server 2005 Client Installation

Sep 11, 2006

Hi ,

Iam a new bee to sql server.I have Installed sql server 2005 ( trail software ) in my Server.I like to install sql server 2005 clinet in another system. Where can i download sql server 2005 client??

My requirement is , i should access sql server database from my client...

Regs,

Priya

View 2 Replies View Related