FirstName | LastName | DateofBirth ---------------------------------------- Thomas | Alva Edison | 10-10-2015 Benjamin | Franklin | 10-10-2015 Thomas | More | 11-10-2015 Thomas | Jefferson | 12-10-2015
Suppose today's date is 09-10-2015 in (dd-MM-yyyy format), I want to perform a query in such a way that I should get the data from the table above WHERE DateofBirth is tomorrow, so I could get the following result.
FirstName | LastName | DateofBirth ---------------------------------------- Thomas | Alva Edison | 10-10-2015 Benjamin | Franklin | 10-10-2015
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)' Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Table Master --------------------------- EmpID EffectiveDateFr Group 00001 1/1/2014 A 00001 1/5/2014 B 00001 1/9/2014 C 00001 2/1/2014 B 00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group 00001 1/1/2014 A 00001 1/2/2014 A 00001 1/3/2104 A 00001 1/4/2014 A 00001 1/5/2014 B 00001 1/6/2014 B 00001 1/15/2014 C 00001 2/1/2014 B 00001 2/2/2014 B 00001 2/20/2004 A
SELECT * FROM bookkeep RIGHT OUTER JOIN acraccts ON LEFT(bookkeep.accnum, 9) = acraccts.p_accnum WHERE (bookkeep.busdate = '03/09/10') AND (bookkeep.tradetype = 'S')
on my sql box, if i run it, i get no data.
i figured out that if i change the where clause to (bookkeep.busdate='2003/09/10') it works
OR
if i simply put SET DATEFORMAT YMD on the first line before the SELECT * that it also works.
my problem is the basic query is hard coded and i really can't change it.
is there a global sql server setting that will make my sql 2000 sp3 box recognize '30/09/10' as 2003/09/10?
I wish to build a table based on values from another table.I need to populate a table between two dates from another table. Usingthe START_DT and END_DT, create records between those dates.I need a new column that is the days between the date and the MID_DTThe data I wish to end with would look something like this:PERIOD DATE DAY_NO200602 2005-07-06 -89200602 2005-07-07 -88200602 2005-07-08 -87<...>200602 2005-10-02 -2200602 2005-10-03 -1200602 2005-10-04 0200602 2005-10-05 1<...>200602 2005-12-18 75CREATE TABLE "dbo"."tblDates"("PERIOD" CHAR(6) NOT NULL,"START_DT" DATETIME NULL,"MID_DT" DATETIME NULL,"END_DT" DATETIME NOT NULL)INSERT INTO tblDates VALUES('200505',2005-04-12,2005-07-05,2005-09-12)INSERT INTO tblDates VALUES('200602',2005-07-06,2005-10-03,2005-12-18)INSERT INTO tblDates VALUES('200603',2005-10-04,2006-01-17,2006-03-27)INSERT INTO tblDates VALUES('200604',2006-01-18,2006-04-10,2006-06-19)INSERT INTO tblDates VALUES('200605',2006-04-11,2006-07-04,2006-09-11)INSERT INTO tblDates VALUES('200702',2006-07-05,2006-10-02,2006-12-18)
I need to send an email when my 'LastRunDate' field is 30 days old (i.e. It should send an email if the LastRunField = 7/21/2007).
I would need to include the matching fields in the database (i.e. MachineID, Description, etc.) then update that field to todays date.
I have a few values in the 'Frequency' field such as Daily, Monthly, Yearly. Daily would be 24 hrs, monthly 30 days, yearly 365 days from the lastrundate.
We have a database and have 6-7 growing tables. All the tables have Primary and foreign key relation. I want to do partition based on the date column.
I need 3 partitions
First partition has to hold present data second partition need to hold the previous year data (SAS storage) Third partition need to hold all the old data and need to be in the archive database
I understand that first we need to disable the constraints (Indexes PK & FK) Then create partition function and partition schema Then Create the Constraints again
I have a table in which each record has a initial date and a final date. I would like to create I query that gives me one row for each month between the initial date and the final date. It would be something like this:
I would like to do that, because these dates correspond to the time in which the products are in possession of sellers, so I would to use this resulting query to generate a pivot chart in Excel to illustrate the value of the goods that are with our sellers in each month.
Is it possible to do it? I think I could do that direct in VBA, but I think that maybe it would be faster if I could do it directly in SQL.
By the way, I am using MS SQL Server and SQL Server Manegement Studio 2012.
I have table "Clients" who have associated records in table "Mailings" I want to populate a gridview using a single query that grabs all the info I need so that I may utilize the gridview's built in sorting. I'm trying to return records containing the next upcoming mailing for each client.
The closest I can get is below: I'm using GROUP BY because it allows me to return a single record for each client and the MIN part allows me to return the associated record in the mailings table for each client that contains the next upcoming 'send_date'
SELECT MIN(dbo.tbl_clients.client_last_name) AS exp_last_name, MIN(dbo.tbl_mailings.send_date) AS exp_send_date, MIN(dbo.tbl_mailings.user_id) AS exp_user_id, dbo.tbl_clients.client_id, MIN(dbo.tbl_mailings.mailing_id) AS exp_mailing_idFROM dbo.tbl_clients INNER JOIN dbo.tbl_mailings ON dbo.tbl_clients.client_id = dbo.tbl_mailings.client_idWHERE (dbo.tbl_mailings.user_id = 1000)GROUP BY dbo.tbl_clients.client_id The user_id set at 1000 part is what makes it rightly pull in all clients for a particular user. Problem is, by using the GROUP BY statement I'm just getting the lowest 'mailing_id' number and NOT the actual entry associated with mailing item I want to return. Same goes for the last_name field. Perhaps I need to have a subquery within my WHERE clause?Or am I barking up the wrong tree entirely..
In the below scenario we are inserting some time related fields in Temp table.But its data type is varchar. Once data loading is finished in the temp table (Data is loading by source team SQOOP and they are unable to load if the source datatype is having Date or datetime) we have to alter the column datatypes. somehow, some character data in inserted in date columns (look at into 3rd insert statement). while altering the table it is failing. Can we do any alternative for this (Means if any varchar data that is non convertible to date can we make as null)
INSERT INTO ##TEMP_TEST SELECT '2014-09-30','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM' UNION SELECT '2014-09-29','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM' UNION SELECT '2014-09-28','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM' GO INSERT INTO ##TEMP_TEST SELECT NULL,NULL,NULL,NULL
I'm not sure if this could be done, but if anyone has any insight on how to do this please let me know...
Currently, I have a table that has a field of Categories. I recently created a Category table in which each category has it's own ID. I need to replace the Data that was in my original table with the new ID's based on the actual category name... Is there any way of doing this without manaul data entry?
I'm not sure if this could be done, but if anyone has any insight on how to do this please let me know...
Currently, I have a table that has a field of Categories. I recently created a Category table in which each category has it's own ID. I need to replace the Data that was in my original table with the new ID's based on the actual category name... Is there any way of doing this without manaul data entry?
I have a table called MasterSkillList which is a list of skills and attributes, eg: [Appraise, INT], [Bluff, CHA] etc I have a table called Classes, which is a list of all classes available (and some details which are irrelevant), eg: [Fighter], [Assassin] etc. I also have a table called ClassSkills which holds a list of classes and their applicable skills, eg: [Assassin, Bluff], [Assassin, Open Lock], [Fighter, Appraise], [Fighter, Bluff] etc. What I have is a gridview which shows all my classes from the class table. i want to be able to select a class on that gridview and create a checkbox list of all available skills that are NOT allready associated with that class. Eg: assassin has bluff and open lock, so those two skills shouldn't appear on my checkbox list. So i want to show all the skill from the master skills list, excluding all the skills the selected class allready has. Alternatively, It would be better if there was a way to display all the skills in existance on my checkboxlist and the ones that class allready has to be checked. Any suggestions? Here's the query I have: SELECT MasterSkillsList.SkillFROM ClassSkills INNER JOIN MasterSkillsList ON ClassSkills.Skill = MasterSkillsList.SkillWHERE (MasterSkillsList.Skill <> ClassSkill.Skill) Edit: I just added the following sql query, but when i run it i get no results even though it should show everything except 2 skills. Have I written it wrong? SELECT SkillFROM MasterSkillsListWHERE (NOT EXISTS (SELECT Skill FROM ClassSkills WHERE (ClassName = @ClassName)))
Hey,First, sorry if this post appear twice, because, I can not find my postrecently send, trying to post it once again.I'm out of ideas, so, I thought, will search help here again :(I'm trying to prepare a view for ext. app. This is in normal cases veryeasy, but what if the view structure should be dynamic?!Here is my point (I will siplify the examples).I have a table:create table t_data (id bigint identity (1,1) not null,valvarchar(10) not null,data varchar(100) not nullconstraint [PK_t_data] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_data (val, data) values('1111111111','1234567890abcdefghijklmnoprstuvwxyz 1234567890abcdefghijklmnoprstuvwxyz67890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('2222222222','1234567890abcdefghijklmnoprstuvwxyz 1234567890abcdefghijklmnoprstuvwxyz12345abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('3333333333','12345abcdefghijklmnoprstuvwxyz12345 67890abcdefghijklmnoprstuvwxyz1234567890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('4444444444','67890abcdefghijklmnoprstuvwxyz12345 67890abcdefg12345hijklmnoprstuvwxyz67890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('5555555555','1230abcdefghijklmnoprst12345uvwxyz1 234567890abcdefghijklmnoprstuvwxyz67890abcdefghijk lmnoprstuvwxyz')gocreate table t_dataVal (id bigint identity (1,1) not null,valvarchar(10) not null,fill varchar(4) not nullconstraint [PK_t_dataVal] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_dataVal (val, fill) values ('1111111111','AAAA')insert into t_dataVal (val, fill) values ('2222222222','KKKK')insert into t_dataVal (val, fill) values ('3333333333','DDDD')insert into t_dataVal (val, fill) values ('4444444444','ZZZZ')insert into t_dataVal (val, fill) values ('5555555555','CCCC')gocreate table t_conf (id bigint identity (1,1) not null,start int not null,length int not null,description varchar(20) not null,constraint [PK_t_conf] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_conf (start, length, description) values (1,10,'value_1')insert into t_conf (start, length, description) values (11,3,'value_2')insert into t_conf (start, length, description) values(55,15,'value_3')insert into t_conf (start, length, description) values (33,2,'value_4')insert into t_conf (start, length, description) values (88,1,'value_5')insert into t_conf (start, length, description) values (56,7,'value_6')goNow here is the issue:table t_conf contain data, which can be modified by user. The user isseting the appropriate values.Now, there should be a view, which returns:- as headers (collumn names) this what is defined in description columnof t_conf (for example: value_1, value_2 ... value_6)- as values, substrings of all data from t_data, cutted with start andlength values for appropriate decription from t_conf.- first two columns of view, should be column val and fill of t_dataValtableSo the effect should be like this:valfillvalue_1value_2value_3value_4value_5value61111111111AAAA1234567890abc....2222222222KKKK1234567890abc....3333333333DDDD12345abcdefgh....4444444444ZZZZ67890abcdefgh....5555555555CCCC1230abcdefghi....of course, for all other value_x should be the appropriate substringsshown.Sounds simple, hm?Well, I'm trying to do this, since yesterday evening, and can not :(In real life, the call of view/function might happend a lot.The table t_data might have around 4000 records, but the data string islonger (around 3000 characters).Application, might acess a udf, which returns table, and I was focusingin that.Was trying, to create local temp table in function, to insert values,using cursor over t_conf.Unfortunately, everything what I get, is just a vertical representationof the data, and I need it horizontal :(The other problem in function is, that I can not use exec() (wll known)so I can not even create a table,dynamicly, using as column names description value from table t_conf,and as size of field length from this table.Sorry, that the description is maybe not exactly for my problem, butthis is because I'm not even sure, which way to use :(any help will be appreciated!Thank You - Matik
I am trying to write a stored procedure that will select information from a SQL table based on a specific time. For example I have a name field and a time field, I want to return just the names that were created between a specific time frame. ex between 3pm and 4pm. Any thoughts?
I have a Users table that I use for membership. I am using username varchar(30) as the primary key for this table since username will always be unique.
The question I have is regarding how SQL Server actually stores data:
I see that when I add users, they are always stored alphabetically sorted on username.
I was expecting that all users will appear on the users table in the order they were added.
Example: I have 3 users (john, jonah, wilson). Now I added 4 user with username='bob'
If I execute select * from users, it returns me (bob, john, jonah, wilson). Look bob has become the first row of the table.
My question: Is Sql server moving 3 older rows to make room for 'bob' and it is also rebuilding part of the index due this new username 'bob'?
If this is the case, then it will have big impact if I have 100K users and I add one user that becomes firstrow. In that case 99,999 rows will have to move.
Bottom line, insert, delete will be very expensive.
I know sql server keeps data physically sorted on PK. But I am concerned here since rows are losing the order in which they were inserted.
Hi I am having a problem in auditing the column data in tables.My requirement is i have write a trigger which is capable of auditing the columns which are going to be added in the future also with out using dynamic SQL.is there any way to do so. I feel if i can get the column data based on ordinal position then it is possible. Can any body suggest. My set Up is like this I have a base_table to be audited. I have a Audit_spec table which contains name of the table and columns to be audited. And Audit table which actually captures the table name,column name ,old value and new value. I have to audit only those columns in the Audit_spec spec. If schema changes(Like new column added) happens to base_table and I want that column to be audited.with out any changes to my trigger code i should handle the newly added column ..
I have soma ado.net code that inserts 7 parameters in a database ( a date, 6 integers). I also use a self incrementing ID but the date is set as primary key because for each series of 6 numbers of a certain date there may only be 1 entry. Moreover only 1 entry of 6 integers is possible for 2 days of the week, (tue and fr). I manage to insert a row of data in the database, where the date is set as smalldatetime and displays as follows: 1/05/2007 0:00:00 in the table. I want to retrieve the series of numbers for a certain date that has been entered (without taking in account the hours and seconds). A where clause seems to be needed but I don’t know the syntax or don’t find the right function I use the following code to insert the row :
and the following code to get the row back (to put in arraylist):
“SELECT C1, C2, C3, C4, C5, C6 FROM Series WHERE (LDate = Today())? WHERE LDate = '" + DateTime.Today.ToString() + "'"
Which is the correct syntax? Is there a better way to insert and select based on the date?
I don’t get any error messages and the code executes fine but I only get an empty datatable in my dataset (the table isn’t looped for rows I noticed while debugging). Today’s date is in the database but isn’t found by my tsql code I think.
I have a query to run a report where the results has a column named “Due Date” which holds a date value based on the project submission date.Now, I need to add 4 columns named, “45 Days Expectant”, “30 Days Overdue”, “60 Days Overdue” and “90 Days Overdue”.I need to do a calculation based on the “Due Date” and “System (I mean default computer date) Date” that if “System Date” is 45 days+ to “Due Date” than put “Yes” in “45 Days Expectant” row.
Also, if “Due Date” is less than or equal to system date by 30 days, put “Yes” in “30 Days Overdue” and same for the 60 and 90 days.how to write this Case Statement? I have some answers how to do it in SSRS (Report Designer) but I want to get the results using T-SQl.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
I have a table dbo.Sales that contains all sales records. There is a column in that table called ItemNumber that I'd like to match with ItemNumber in a flat file and update the ItemCost based on the ItemCost column in the flat file.
So while there will be many sales records for each ItemNumber, I need to loop through and update the ItemCost in that sales record based on the corresponding ItemCost in the flat file. Does this make sense? I really need this for court and I can't figure out how to do it. I took a SQL course about 7 years ago but have forgotten everything.
There will be many sales records for each ItemNumber in the database table. I need to update each one with correct cost based on the item number and cost mapping from flat file.
I am putting together an invoice for my company. I have a text box describing each section of the invoice, followed by a table to list out the charges. I am using multiple tables based on what type of charge the client is receiving.
I would like to hide each section if there are no items purchased of that type. I can do this with the table using the expression "=CountRows() < 1", but I do not know how to refer to that table (call it Tablix1 for the sake of discussion) for the text box. I've tried using a ReportItems function as my basis, without success.
I'm trying to load data from old SQL server 2000 to new SQL server 2014. I need to do a checksum to check if all the source data is loaded in the target database(SQL server 2014). I've created the insert statement for the same which works. I need to use checksum to make sure all the source rows are loaded in the target table. I haven't done checksum before.
Here is my insert statement:
INSERT INTO [Test].[dbo].[Order_tab] ([rec_id] ,[date_loaded] ,[Name1] ,[Name2] ,[Address1] ,[Address2]
