Getting Date Into Proper Format
May 22, 2007
Hi,
I have a .csv file that lists date like this: "20070522", no hyphens or spaces. In the file connection manager I have the column defined as string. The database column is a datetime.
When I attempt to load the file to the table, I get this error:
[OLE DB Destination [9]] Error: There was an error with input column "effective date" (155) on input "OLE DB Destination Input" (22). The column status returned was: "The value could not be converted because of a potential loss of data.".
My question is, what do I need to do to this column so that I can load it into the database?
Thanks much
View 6 Replies
ADVERTISEMENT
Dec 11, 2006
Hello, I have one package that seems to have continuous problems with memory. As of right now it loads a little over 1 million records. I tried leveraging the property, BufferTempStoragePath, but I don't seem to have the right path name. What sort of path do you put there? File? Folder? If it is a file, what sort of file should it be... text, dat, xml? If someone could point me in the right direction it would be greatly appreciated. Thanks.
PS: Below are the error messages I am getting:
[DTS.Pipeline] Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
[DTS.Pipeline] Error: The buffer manager cannot create a temporary storage file on any path in the BufferTempStoragePath property. There is an incorrect file name or no permission.
View 3 Replies
View Related
Jan 22, 2007
Hi all,
I am using ASP.NET 2003 with SQL Server as database.
I have a database of a book store with BookPicture, Author, Title, and Description of the Book.
Now when the user searchers for a book with a keyword, how can I display the results which should show:
1. The picture of the book, 2. The at it right, Title of Book, 3. The author,4. The descritionThen the image of "Add to cart"
Each search result must be separated by a box like the cell of a table.
Is it possible to be done?
Thanking you in advance
Tomy
View 2 Replies
View Related
Feb 1, 2008
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies
View Related
Apr 16, 2007
I read some questions where questioners ask "Sometimes client gives data where dates are expressed as float or integer values.
How do I find maximum date?".
Ex
March 02, 2006 can be expressed as
02032006.0
020306
2032006
20306
020306.0000
2032006
Assuming the values are expressed in dmy format
The possible way is convert that value into proper date so that all types of date related calculations can be done
Create function proper_date (@date_val varchar(25))
returns datetime
as
Begin
Select @date_val=
case when @date_val like '%.0%' then substring(@date_val,1,charindex('.',@date_val)-1)
else @date_val
end
return
cast(
case
when @date_val like '%[a-zA-Z-/]%' then case when ISDATE(@date_val)=1 then @date_val else NULL end
when len(@date_val)=8 then right(@date_val,4)+'-'+substring(@date_val,3,2)+'-'+left(@date_val,2)
when len(@date_val)=7 then right(@date_val,4)+'-'+substring(@date_val,2,2)+'-0'+left(@date_val,1)
when len(@date_val)=6 then
case when right(@date_val,2)<50 then '20'
else '19'
end
+right(@date_val,2)+'-'+substring(@date_val,3,2)+'-'+left(@date_val,2)
when len(@date_val)=5 then
case when right(@date_val,2)<50 then '20'
else '19'
end
+right(@date_val,2)+'-'+substring(@date_val,2,2)+'-0'+left(@date_val,1)
else
case when ISDATE(@date_val)=1 then @date_val else NULL end
end
as datetime
)
End
This function will convert them into proper date
select
dbo.proper_date('02032006.0') as proper_date,
dbo.proper_date('020306.000') as proper_date,
dbo.proper_date('02032006') as proper_date,
dbo.proper_date('020306') as proper_date,
dbo.proper_date('20306') as proper_date,
dbo.proper_date('020306') as proper_date
Apart from converting integer or float values to date, it will also convert date strings to date
Select
dbo.proper_date('March 2, 2006') as proper_date,
dbo.proper_date('2 Mar, 2006') as proper_date,
dbo.proper_date('2006 Mar 2') as proper_date,
dbo.proper_date('2-Mar-2006') as proper_date,
dbo.proper_date('3/02/2006') as proper_date,
dbo.proper_date('02-03-2006') as proper_date,
dbo.proper_date('2006/03/02') as proper_date,
dbo.proper_date('March 2006') as proper_date,
dbo.proper_date('2 Mar 2006') as proper_date
Madhivanan
Failing to plan is Planning to fail
View 8 Replies
View Related
Nov 14, 2006
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
View 6 Replies
View Related
Mar 7, 2008
Using SQL Server 2005, I have set up a database for a school to provide timetables for students, teachers etc. The data is currently displayed in this form:
DAY LESSON YR SUBJ GRP STAFF ROOM
Mon 1 7 PE T Da Gym
Mon 2 7 PE T Da Gym
Mon 3 7 Ma A Pr 5
Mon 4 7 Ma A Pr 5
Mon 5 7 Ma A Pr 5
Mon 6 7 Dr T Fn 36
Mon 7 7 Dr T Fn 36
Mon 8 7 En T Bn 21
Mon 9 7 En T Bn 21
Tue 1 7 De T Df 27
Tue 2 7 De T Df 27
etc.
I would like to display this as timetable with DAYS as row headings and LESSON numbers as column headings, with the remaining column info. in the above table combined into one value:
1 2 3 4 etc
MON (7 PE T Da Gym) (7 PE T Da Gym) (7 Ma A Pr 5) (7 Ma A Pr 5)
TUE (7 De T Df 27) (7 De T Df 27) etc.
WED
THU
FRI
Should I be doing this with PIVOT (scares the life out of me ...) or is there some other solution? Many thanks.
View 1 Replies
View Related
Jun 7, 2007
I am sending out an SOS.
Here is the situation:
We recently upgrade to 2005(sp). We have one report that ran fine in 2000 but leaves out data from certain columns (date related) in the results, so we chalked it up to being a non compatiable issue. So, I decided to try and switch the DB back to 2000 compatibility (in our test env) and then back to 2005. After that the report started returning the proper data. We can€™t really explain why it worked but it did. So we thought we would try it in prod (we knew it was a long shot) and it didn€™t work. So the business needs this report so we thought we would refresh the test system from prod, but now we are back to square one. I was wondering if anyone else has heard or seen anything like this. I am open to any idea€™s, no matter how crazy. J The systems are configured identically. Let me know if you need more information.
Thank you. Scott
View 4 Replies
View Related
May 28, 2008
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
View 6 Replies
View Related
Nov 19, 2014
We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
View 9 Replies
View Related
Jun 15, 2005
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
View 3 Replies
View Related
Jul 20, 2005
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies
View Related
Sep 28, 2007
Using DTS package in 2000 version, I am dumping TXT file contents into SQL Table,
I have one column having date in format YYYYMMDD(20070929) and corresponding column in SQL is datetime, but it fails on data type mismatch.
I have no choice of making date column in SQL to string or Varchar etc,
is there any way to make that date column in SQL to convert the value upon transformation from format (YYYYMMDD) to M/DD/YYYY (9/29/2007).
many many thanks,
View 2 Replies
View Related
Sep 5, 2007
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €ś12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
View 1 Replies
View Related
Jul 24, 2007
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
View 1 Replies
View Related
Jun 15, 2015
i have a excel file in which i have a date column it having the below date formats belowÂ
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
View 6 Replies
View Related
Oct 21, 2013
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
View 3 Replies
View Related
Apr 10, 2008
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
View 1 Replies
View Related
May 4, 2008
dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May 4 2008 3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May 4 2008 3:19:45 AM....
how i can do this
regards
View 4 Replies
View Related
Dec 11, 2007
I need to do the following and am hoping someone can help me out.
I have C#(asp.net app) that will call a stored procedure. The C# will pass in a date to thestored procedure. The date is in the format YY/MM/DD. Once inside of the stored procedure, the datepassed into the stored proc needs to be compared to todays date. Todays date must be determined inthe SQL.
So basically here is my pseudo code for what I am trying to accomplish. Basically I just am afterthe comparison of the two values:
If @BeginDate < TodaysDate
The difficult part is how to obtain the value for "TodaysDate"
Taking into consideration that "TodaysDate" should probably be in the format of YY/MM/DD considering that is how the date it is to be compared with is being passed in.
Can someone please code this out for me in Microsoft SQL. I would be forever grateful.
View 1 Replies
View Related
Feb 15, 2008
Hi,
I Have this simple convertion in a Script component
Dts.Variables("dateOfProcess").Value = CDate(lineMCF.Substring(30, 2) + "/" + lineMCF.Substring(28, 2) + "/" + lineMCF.Substring(24, 4))
this works fin in my development environment which has a spanish version of SQL Server and uses "DD/MM/YYYY" as date format.
but the production environment has an english version of SQL Server and "MM/DD/YYYY" date format, so the package crashes in this server.
How do I convert the string to date not depending on the SQL server language.
thanks.
View 2 Replies
View Related
Jan 24, 2008
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
View 5 Replies
View Related
Nov 27, 2015
I have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.
I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.
Below is my latest effort which returns the error:
Incorrect syntax near the keyword 'as'
What code would work to return a MM/DD/YYYY value for New_Accounting_Date?
Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH
View 11 Replies
View Related
Nov 11, 2002
Hello,
anybody has query regarding converting date from Julian into our our dateformat?.
Your Help really apreciated,
Thanks,
Ravi
View 3 Replies
View Related
Sep 17, 2006
Hello!I inserted data to dbase, but I soon got error message.. Europien date format is dd.mm.yyyy So I get date from text box:<asp:textbox id="date" style='Z-INDEX: 102; LEFT: 411px; POSITION: absolute; TOP: 42px' runat='server' Width='185px' Height='22px'>Date</asp:textbox>Date which is get as string is inserted to dbase by code behind:string insert = "INSERT INTO tbl_UFD_PlanPremier (DAT_Prem) VALUES ('"+date.Text+"')";I thought that that will work ok, but.. By date 1.1.2006 was everithing ok, problems begann with 30.5.2006 - I get error message: failed to convert char data type to smalldatetype.I was seeking for reason and I found out that date in SQL database is saved in format dd.mm.yyyy but string which is inserting by ASP function:ExecuteNonQuery() into dbase has format mm.dd.yyyy - when I wrote to textbox date 5. 30. 2006, it passed allrightIs there any help? like how to change date format? Thanks
View 3 Replies
View Related
Nov 28, 2007
I have a written a stored procedure and excecuting it and displaying it in gridview(ASP.NET). I am getting Birthdate in the form of 8/23/1956 12:00:00 AM. I just need 8/23/1956. I have defined it as smalldatetime in stored procedure. How can I get it in that format ?
HELP.........
View 5 Replies
View Related
Mar 18, 2008
Hello all...
is it possible to change the format of 2/26/2008 1:57:00 PM to 02/26/2008 in the sql table?
View 4 Replies
View Related
Jul 31, 2004
hi is there a function that can get the date format of sql server
View 1 Replies
View Related
Mar 21, 2006
I have computer with Serbian standards and formats (Regional Settings).I use datepicker control to select date, but when I try to insert it into database (DatePicker1.Value) it throws error.What should I set up in order to be able to insert date into ms sql 2000 database, without having to change Regional settings?This is last question for tonight Thanks,Milan
View 2 Replies
View Related
Apr 13, 2003
When you put data int a MS SQL database via php, dependign on the SQL Server version you are using, the date format needs to be different. Eg a German Server wouldn't accept something like yyyy.mm.dd, but dd.mm.yyyy would work fine here. But dd.mm.yyyy isn't working on an English version of an MS SQL Server. I wonder if there is one format, that EVERY MS SQL Server understands?
Michael
View 5 Replies
View Related
Jul 7, 2004
hi,
Can someone help me out with the following problem. While storing date in the SQL server it has its own format of storing(the first 3 digit denotin the format of display). Now if i need to convert this into Date format how do i do it????
Please note the coloum field is of the datatype LOCAL_TIME and this needs to be converted in to DATE for generating reports. I did try using CAST and CONVERT but could not succeed.
The field stores values of the form
1031826600 - i guess the seven digits from the end denote number of secs lapsed since Jan 1 1970.
Thanks
View 3 Replies
View Related
Aug 23, 2001
whats the query to get the output
for for the date like yyyymmddhhmmss
Thanks
Harish
View 1 Replies
View Related
Jul 2, 2002
Hi
I am running the following on two different MS SQL 2000 servers:
select datepart(mm,'2000-09-01')
On one server I get September
On the other I get Jan
What could be the reason? Is there a server wide setting for this.
Thanks
Tariq
View 3 Replies
View Related
