Hi Everybody,
Iam a sql server developer,iam on a migration project,iam encountering an error when iam editing the control flow task.it says the sql server doesnot exist or access denied,pls can anyone help me on this.
Thanks and Regards,
sg
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies View Related
Hi,
I tried to confiure sql reporting service on vista box but I got the following page.
Server Error in '/Reports' Application.
Request is not available in this context
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Request is not available in this context
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Request is not available in this context]
System.Web.HttpContext.get_Request() +3465893
Microsoft.ReportingServices.UI.Global.get_ConfigurationManager() +47
Microsoft.ReportingServices.UI.GlobalApp.Application_Start(Object sender, EventArgs e) +32
[HttpException (0x80004005): Request is not available in this context]
System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app) +3385130
System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +125
System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +182
System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +259
System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +245
[HttpException (0x80004005): Request is not available in this context]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3465475
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +69
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +675
I tried a lot of searches online but could not find any solutions. I am running Vista Ultimate, SQL Server 2005 and IIS 7. I am sure I configure everything right under "Default Web Site". The same config is running perfectly under XP. Can anyone help please?
I created a package that refreshes tables on one SQL Server to another SQL Server. First, I use an ExecuteSQL task to truncate the tables. Then I use a Data Flow task to copy the tables from one server to the other. Finally I update a log table. It was working fine with four tables. I added another table to the refresh and now I get these error messages:
[Source - RbcAcctSegment [1096]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
[Source - RbcAcctSegment [1096]] Error: Opening a rowset for "[dbo].[RbcAcctSegment]" failed. Check that the object exists in the database.
[DTS.Pipeline] Error: component "Source - RbcAcctSegment" (1096) failed the pre-execute phase and returned error code 0xC02020E8.
RbcAcctSegment is the new table that I added. The errors occur in the Data Flow task. We have tried running this on a different workstation with the same results.
What would cause this?
Fred
Hello!My environment is: Win 2000 Server, MS SQL-Server 2000 (SP2)and MS ExchangeServer 5.5the two following TransactSQL-codepieces show differentresults:1. with attachmentmaster..xp_sendmail@recipients = 'j.hetzel@rac.de',@subject = 'test',@message = 'test',-- ******************************@attachments = 'c: est.txt',-- ******************************@no_output = 'False'-->18025 level 16 state 1 line 0xp_sendmail failed with mail error 0x800040052. without attachmentmaster..xp_sendmail@recipients = 'j.hetzel@rac.de',@subject = 'test',@message = 'test',-- ******************************-- @attachments = 'c: est.txt',-- ******************************@no_output = 'False'-->Mail sent.why am I not able to send emails with attachments?Who can help me???Thanks in advanceJürgen
View 2 Replies View Related
I'm a user of SQL 2000//2005, and I'm trying to send files using SQL Mail.
I'm am successful when I send a file of approx 13MB in size but, when I try to send a 24MB file, I receive the above subject error.
Is anyone aware of a file size limitation on attachments?
After consulting with the Exchange Administrator, I was advise that there is a limit on file attachments. This explains why I get this message with large (>20MB) attachments.
With this additional information I need to compress my file using a compression tool like winzip or pkzip. My company uses the windows version of pkzip. However, I have downloaded an evaluation version of the PKzip command line version.
Can someone provide guidance how I can execute this utility within my sql procedure?
The below error happens when trying to use the SSIS Transfer SQL Server Objects Task to transfer objects. Related to (Bug?? Transfer SQL Server Objects Task - error when copying Views )?
--------------------
Error: 0xC002F325 at Transfer Data (NEW) Pre, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: Transfer Data (NEW) Pre
hello all
i m getting the following error while exporting an excel file in SSIS
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
is this a bug?
pls suggest a workaround.
hi
I've got a job which copy tables between different servers .
I am feeding the tables one by one and the process of copying is in a loop so I have cotrol over the copying process.
it works fine but sometimes randomly I am getting
Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
and the process fails and this might happen for in any point and on any table and sometimes it runs all the way successfully!!
any idea what the problem might be!
Thanks
I export data from a dozen tables of one database to another database on another server regularly and it works well. However, if i choose the option of "save SSIS package", I get the following error:
TITLE: SQL Server Import and Export Wizard
------------------------------
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
The ExistsOnSQLServer method has encountered OLE DB error code 0x80004005 (Client unable to establish connection). The SQL statement issued has failed.
------------------------------
BUTTONS:
OK
------------------------------
I use management studio to do this, but the servers are 2000.
Does anyone have any clue about this?
Hi Everyone,
Hope you don€™t mind helping.
I am actually following exactly the example given in Karl Moore€™s €˜The Ultimate VB.net and ASP.net Code Book€™, ISBN 1-59059-106-2, Chapter 4, pp 141€¦
I am using VB.Net 2002 and create a Web Form, placing on it a Data Adapter, Connector and Dataset and link this to a Data Grid. The database is a quite large (150 Mb) Access 97 db that is shared over a network and the Provider is a Microsoft.Jet.OLEDB.4.0 connection. While in designer mode I can create the Dataset and even preview the data itself from the menu. When I run the project, the Web Form displays, connects to the Site (via IIS 5.1) but then the following error text is thrown all over the form:
Server Error in '/WebApplication3' Application.
Disk or network error.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Disk or network error.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OleDbException (0x80004005): Disk or network error.] System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr) System.Data.OleDb.OleDbConnection.InitializeProvider() System.Data.OleDb.OleDbConnection.Open() System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) WebApplication3.WebForm1.Page_Load(Object sender, EventArgs e) System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032
I have read and implemented the articles in the KB about setting up System TEMP variables and changing their rights and also setting up the ODBC key in the registry but these make no difference however I change them. I have also tried copying the database to the local machine, again to no avail.
The versions of the system I am using are:
Microsoft Visual Basic .NET 55524-640-5065381-18871
Microsoft Visual Studio .NET 2002 Service Pack 1 (KB837234)
Microsoft Developer Environment 2002 7.0.9955
I have no idea why what should be a very simple thing just fails so catastrophically. I am tempted to move to VB 2005 but if anyone can shed light on the problem I should be most grateful.
Many thanks for your time and Energy.
Jim McGoldrick
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies View RelatedI have ran into the same problem ... Importing from Access into SQL 2005 using SSIS and get the error:
[Connection manager "SourceConnectionOLEDB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Hi List
Im trying to set up an implementation of Project Real --it works like this-
Create two system environment variables called REAL_Root_Dir and
REAL_Configuration with the values given below. Click on
Start -> Control Panel -> System. Go to the Advanced Panel, click Environment Variables button, then New in the System variables box.
If the Project REAL files were installed at C:Microsoft Project REAL, then the variable values will be:
Variable Name: REAL_Root_Dir
Variable Value: C:Microsoft Project REALETL
Variable Name: REAL_Configuration
Variable Value: %REAL_Root_Dir%REAL_Config.dtsconfig
The package OLEDB connections work like this
First read enviroment variable to get location of config file
Next read Config File to get connection string for Config Database
<?xml version="1.0"?>
<DTSConfiguration>
<Configuration ConfiguredType="Property" Path="Package.Connections[SQL - Configuration].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=(local);Initial Catalog=DataWarehouseABC;Provider=SQLNCLI.1;Integrated Security=SSPI;</ConfiguredValue>
</Configuration>
</DTSConfiguration>
Next read Config database to get connection strings for Source and Destination databases
Destination database is called "DataWarehouseABC"
Source database is called "SnapshotABC"
the Source database OLEDB connection works 100%
however the destination OLDB connection we get this error below
PS--Both source and destination databases are on the same development machine , however both databases are restored bak files from another production machine
Error 1 Error loading LoadGroup_Daily.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user 'xxxxxx'.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot open database "DataWarehouseABC" requested by the login. The login failed.".
Any ideas on how one OLEDB Connection in this package can get this corruption
thanks in advance
Dave
Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)
A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].
In case if anyone has a solution to it, please let me know.
When executing the following SQL statement we get the error as message below:
INSERT INTO [dbo].[ProductImport] ([CustomerName], [AccountCode], [ProductCode], [Description1],
[Description2], [MaterialType], [Brand], [PGroup], [Type], [GSM], [Colour], [Size1], [Size2], [Microns],
[PriceQuantity], [PriceUnit], [Packed], [Price], [MinQuantity], [TonnePrice], [LeadTime], [WebURL])
SELECT [CustomerName], [AccountCode], [ProductCode], [Description1], [Description2], [MaterialType], [Brand],
[PGroup], [Type], [GSM], [Colour], [Size1], [Size2], [Microns], [PriceQuantity], [PriceUnit], [Packed], [Price],
[MinQuantity], [TonnePrice], [LeadTime], [WebURL]
FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'
Text;Database=D:ApplicationsxxxxxxxxxAppRootxxxxxxxxxSQLCatalogues;HDR=YES', 'SELECT * FROM [product_test.csv]')
AS ImportFile WHERE [ImportFile].[MaterialType] IN (1, 2, 3, 4)
Error message
Server: Msg 7399, Level 16, State 1, Line 5
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.
[OLE/DB provider returned message: Unspecified error]
OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ].
This is being run on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86)
Windows 2003, build 3790.srv03_gdr.070301-2306
Have checked a number of knowledge base articles
C:Windowssystem32msjet40.dll version 4.0.8618.0
REGEDT32: HKEY_LOCAL_MACHINESOFTWAREODBC, Administrator/everyone full access
D:ApplicationsxxxxxxxxxAppRootxxxxxxxxxSQLCatalogues has full permissions for Administrator/everyone groups
Can anyone suggest the next step to identifying a possible cause to this issue.
Hi,I have a stored procedure that makes an MDX query for me, on SQL 2000, service pack 3 it works fine, but on service pack 4 it stops working with the error:Server: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'MSOLAP.2' reported an error. The provider did not give any information about the error.OLE DB error trace [OLE/DB Provider 'MSOLAP.2' ICommandPrepare::Prepare returned 0x80004005: The provider did not give any information about the error.].and i'f i call @@Error I get the error number 7399.Any ideas as to what might be going on? The stored procedure which worked prior to service pack 4 is as follows:CREATE PROCEDURE MDXTester
(
@CustId Varchar(4)
)
AS
IF NOT EXISTS(SELECT * FROM master..sysservers where srvname = 'CZVCube')
BEGIN
EXEC sp_addlinkedserver 'CZVCube',
'',
'MSOLAP.2',
'10.0.41.128',
'CZV'
END
DECLARE @OPENQUERY nvarchar(4000), @MDX nvarchar(4000), @LinkedServer nvarchar(4000)
SET @LinkedServer = 'CZVCube'
SET @OPENQUERY = 'SELECT * FROM OPENQUERY('+ @LinkedServer + ','''
SET @MDX = 'WITH
MEMBER [Measures].[YTD NV] AS ''''Sum(YTD(),[Net Value])''''
MEMBER [Measures].[YTD Prev] AS ''''Sum(YTD(),([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember)))''''
MEMBER [Measures].[YTD Change] AS ''''[Measures].[YTD NV] - [Measures].[YTD Prev]'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[YTD Change Perc] AS ''''[Measures].[YTD Change] / [Measures].[YTD Prev]'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[Monthly Change] AS ''''[Net Value] - ([Net Value],FiscalYear.PrevMember)'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[Monthly Change Perc] AS ''''([Monthly Change] / ([Net Value],FiscalYear.PrevMember))'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[Annual Change] AS ''''[Net Value] - ([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember))'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[Annual Change Perc] AS ''''([Annual Change] / ([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember)))'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[12 mth mov av] AS ''''Avg([FiscalYear].CurrentMember.Lag(11):[FiscalYear].CurrentMember, [Measures].[Net Value])''''
SELECT {[Measures].[Net Value] , [Measures].[YTD NV], [Measures].[YTD Prev],[Measures].[Monthly Change], [Measures].[Monthly Change Perc], [Measures].[Annual Change], [Measures].[Annual Change Perc], [Measures].[YTD Change], [Measures].[YTD Change Per
c], [Measures].[12 mth mov av]} ON COLUMNS,
LastPeriods(12, [FiscalYear].[Apr 08]) ON ROWS
FROM CZV
where [C_CRMID].[' + @CustId + ']'
EXEC(@OPENQUERY + @MDX + ''')')
Please can anybody help me in fixing this error I am getting on ASP page while accessing ASP database page using an SQL server database.
View 4 Replies View RelatedWe scheduled lot of SSIS packages on 64 bit server and most of the time they are running fine. Some times we are getting below error message on any random package. When we re-run its working fine to success. This is repeating once in a week on different packages.
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_TblObject'. Cannot insert duplicate key in object 'dbo.tblObject'."
Please let me know if you have any solutions?
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
Please help.
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening.
It stopped worked over the week end.
with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine
--TNS names looks fine
---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
Hi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
where can i find it?
thanks
Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that.
Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
Step : 3 Push From Mobile
Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);
So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan