Hello everybody,
I can't find any posts concerning this error. While executing the stored package (using Execute Package Utility). I get error: SSIS Execution Properties "Could not load package "File Systemmigration_package_1" because of error 0x80010112." The package is there and it was correctly loaded.
Please can anybody suggest what do do now or some workaround?
Thank you for any suggestions
Patrik Svestka
I am using Excel VBA to run a stored procedure which executes a package using the built-in SQL Server stored procedures. The VBA passes two values from excel to the stored proc., which is then supposed to pass these "parameters" to the package to use as a variable within the package.
@Cycle sql_variant = 2
WITH EXECUTE AS 'USER_ACCOUNT' - account that signs on using windows authentication
AS
BEGIN
SET NOCOUNT ON;
declare @execution_id bigint
[code]....
When I try to execute the package, from SQL Server or Excel using the Macro I built, I get the following error:"The parameter '[User::Cycle]' does not exist or you do not have sufficient permissions." I have given the USER_ACCOUNT that runs executes the stored procedure permission to read/write to the database and the SSIS project folder.
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
My current task in my company is...
I got a Spreadsheet from which i have to get the data into a "Staging Table" and from there the data has to go into 10 different Tables in my database..
I had created a DTS package using ActiveX script and written a Stored Proc to get the records from Staging table to Database tables...every thing is working fine... but...
they asked me to send "TapeType' and "DealName" into two fields and "current datetime" into one more field of the stagingtable fields which are not present inthe Spreadsheet....
so in the Activex script i hard coded... destination"TapeType"= "BidTape" and destination"DealName"= "ABCD" and its working...
and for currentdate i had defined a DTS Task and in that i had written a SQL stmts..
update table....
set currentdate = getdate()
where TapeType = 'BidTape' ..... which is also working....but the problem is
if i got one more spread sheet with same "TapeType" i.e. BidTape but with different "DealName" i.e. "XYZ".... every thing is working out but....the Currentdate field is getting updated every where with as one date..???
can u suggest me a better solution here.....
and after this Iam planning to create one more Task to Execute the Proc..... but I have to pass 2parameters i.e. "Dealname" and "TapeType"... they want every thing to be get done with single mouse click...
can u suggest me here how to pass these 2parameters in the DTS package,..
I will be waiting for any one your valuable suggestions....
In SQL Server 2005 I need a stored procedure that will execute an SSIS Package for me. There is some earlier stuff on the board but I don't understand it. I don't want to create a Job to do it if I don't have to.
Thanks,
George Cooper
Hey guys,
I've got a problem here. I need to send the query result to a csv file then transfer the file to a website. I thought this is a good candidate for a SSIS package. The package is ready now but I don't know how can I execute it from within a stored procedure.
I thought sp_OA family of extended procedure would be helpfull. After following steps:
EXEC @hr1 = sp_OACreate 'DTS.Package', @oPKG OUT
EXEC @hr1 = sp_OAMethod @oPKG, 'LoadFromSQLServer("foo", ,, 256, , , , "foo1")', NULL
EXEC @hr1 = sp_OAMethod @oPKG, 'exec'
EXEC @hr1 = sp_OADestroy @oPKG
it tells me command execute successfully. But no package actually gets executed and I can see no results
Thanks
I wrote package using Integration Services and tried execute it on Visual Studio 2003 (Visual Basic). Package was loaded, but execute method has failed without any error messages. When I tried to run it on Visual Studio 2005, execution was successful.
Codes:
Dim App As DTSLib.IDTSApplication90 = New DTSLib.Application
Dim p As DTSLib.IDTSPackage90 = App.LoadPackage("d: empPackage.dtsx", True, Nothing)
p.Execute()
What can be the reason of the trouble?
Thanks,
Alexander
Hi All,
I created a Package that calls Three other Packages through the Execute package task.
I saved The main package and the sub-packages in Dontsavesensitive mode and Referred to the config file.
I checked the Package thru VSS and When iam running thru the Bat file iam getting the following error
Description: Error 0x80070002 while loading package file "C:Documents and SettingsUSERNAMEMy DocumentsVisual Studio 2005ProjectsImportFILEImportFILEPACKAGE.dtsx". The system cannot find the file specified.
Iam not sure why its asking for this path in the production server.
This is the initial path where i saved the package in BIDS environment.
Please help me.Help is greatly appreciated.
Thanks,
SVGP
.
Hi,
I have an ssis package which reads a file and upload the data into a table.
Im executing this package through Stored procedure through dtexec /F command
If im uploading this file from local machine the package is executing and the data is uploaded to the table.
If it is in network and try to upload it will through an error that can't upload the file..
I have also shared the file on the network.
Can anyone help
Hi everyone,
I just got assigned to help out with a couple of problems with the running of DTS packages using the SQL Server Agent, this is the problem and a list of what I've done so far:
There are 4 packages that:
a) Deletes all records from a table and then populates it using a flat file that contains that day's transactions.
b) Creates a report in Excel
c) Creates a summary report in Excel
d) Does a), b) and c) for another table.
All these packages are scheduled to run weekdays starting at 8:00 am, and they were owned by sa. Last month we had a massive change of passwords thanks to an audit and unfortunately the dba left without letting us know that password. After the massive change, these packages started failing with errors like:
The job failed. The Job was invoked by Schedule 18 (DLYINVDT_XLS). The last step to run was step 1 (DLYINVDT_XLS).
The job failed. The Job was invoked by Schedule 22 (AGAR830_dts). The last step to run was step 1 (AGAR830_dts)
Yesterday I went into all the packages and changed the connection properties from user sa to another user that has permission over the tables and ran the 4 of them at least 10 times each, both using my personal laptop and directly in the server (just wanted to check remote and local, even though I know it really has nothing to do with the execution that its always local to the server).
Now, the funny thing is that I came in this morning and guess what..... yeap, the packages failed, I can run them manually with NO problem at all, but if I run them using the SQL Server Agent then they just will not run.
At the time I was writing this I found out the password for sa, so now I'm using it but unfortunately no change, the errors now are :
The job failed. The Job was invoked by User sa. The last step to run was step 1 (AGAR830_dts)
I'm an informix dba and I started training myself in sql a couple of months ago so I'm confortable with what I'm doing, but at this point in time I'm about to throw something to the screen :) Since I can execute the packages manually then the users are happy, but I would really like to find out why the Agent is not working right.
Any help will be GREATLY appreciated
Luis Torres
I migrated the DTS package to SSIS package using the migration wizard...
but when i try to execute it it gives the following error plz help ...
error : Error retrieving file name for a component failed with the error code 0x043A1034
any suggestions ...
Hi! Good Day!
I am executing a DTS PAckage from Visual Basic. My code is this:
objPackage.LoadFromSQLServer "SERVER", , , _
DTSSQLStgFlag_UseTrustedConnection, , , , "DTSPackage1"
objPackage.Execute
objPackage.LoadFromSQLServer "SERVER", , , _
DTSSQLStgFlag_UseTrustedConnection, , , , "DTSPackage2"
objPackage.Execute
The first DTS package was executed successfully, but when it hit the second package, an error occurs:
Step 'DTSStep_DTSDataPumpTask_1' already exists in the collection.
Please help.
Thanks.
HelloI am trying to execute ‘xp_cmdshell' from within a DTS package thatwas created by another person. When I try to execute that ‘SQL Task'selectively from within the package, I get the following errormessage:Error Title: Package ErrorError Details:Error Source: Microsoft OLE DB Provider for SQL ServerError Description: xpsql.cpp: Error 87 from GetProxyAccount on line604Why is this error message popping up? When I create a new package(myself) and create an exact same SQL task as above and run it, theSQL task runs fine.Appreciate any help / feedback.Thanks in AdvanceJagannathan Santhanam
View 1 Replies View Related
Hi all..
My server is 64 bits and sql server 32. When i run the SSIS package in SSIS it´s works correctly, but when i make the .manifest to install the package in my server i got the error :
===================================
Unexpected error occurred. (Package Installation Wizard)
===================================
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application..ctor()
at Microsoft.SqlServer.Dts.Deployment.PackageInstallationWizardForm..ctor()
at Microsoft.SqlServer.Dts.Deployment.PackageInstaller.Main(String[] args)
===================================
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application..ctor()
Thank´s...
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
Hi,
I'm in the process of writing a fairly complex SSIS package that reads csv files and goes on to load the content into a SQL Server 2005 database.
I am testing the package by executing it from within a Nant script. My test process resets the data in the target database and then loads data from a known set of test data files. Because it's scripted I can be sure that SSIS is being asked to do the same thing, every time in a consistent way.
When I execute the package I frequently (although not always) get an error message dialog mid-ececution that reads:
Code Snippet
Microsoft Visual c++ Runtime Library
Runtime error!
Program: C...
The application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
When I click OK the VS Just-In-Time debugger tells me about an unhandled win32 exception in DTExec.exe [4696] and asks me if I wish to debug (which I do not).
No error is reported by SSIS itself, it literally just stops in its tracks.
I will appreciate any help that can be offered here
Nick
Hi,
I'm at a loss as to why i am getting the following error:
Retrieving the COM class factory for component CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}failed due to the following error: 80040154
I am calling the package from a C# application which i have installed within a citrix environment. The application works without any trouble on my development machine but as soon as i run the code that executes the SSIS pacakge i get the error. Can anyone enlighten me as to what is causing this?
Many thanks in advance,
Grant
Hi,
I have a package which reads an XML file from a certain folder and parses it.
I deployed my package onto the server. Copied XML files on the D: drive the following folder on the server.
Dim reader As New Xml.XmlTextReader("D:AppsRequestClientsClientsStatus.xml") is fine.
But
Do While (reader.Read())
generates "The Device is not ready"
I think it is still trying to read it from my desktop on which I don't have a D drive.
Any help is appreciated.
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. Â After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
 SELECT @cmd = 'dtexec /FILE "D:Program FilesMicrosoft SQL Server100DTSPackages.....PopulateReport.dtsx"'     Â
 SELECT @cmd = @cmd + ' /Decrypt T@!0er '     Â
 SELECT @cmd = @cmd + ' /set package.variables[vAppID].Value;' + CONVERT(VARCHAR(10),@appId)     Â
 SELECT @cmd = @cmd + ' /set package.variables[vDBName].Value;' + '"' + @db + '"'     Â
 SELECT @cmd = @cmd + ' /set package.variables[vBuildMFF].Value;' + CONVERT(VARCHAR(10),@BuildMFF)     Â
Â
[code]....
While executing SSIS package from command prompt as follows:
dtexec.exe /DTS "MSDBetl-hyundai-package" /SERVER tvmwindev02 /CONNECTION "TVMWINDEV02.HISNA_POC";"Data Source=TVMWINDEV02;In
itial Catalog=HISNA_POC;Provider=SQLOLEDB.1;Integrated Security=SSPI;Auto Translate=False;" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E /CONSOLELOGO
while executing the package following error message is received as :
Error: 2006-07-28 15:12:36.60
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Data Conversion" (202).
End Error
and at the end as :
DTExec: The package execution returned DTSER_FAILURE (1).
Same error appers while executed from Integration Services - ->stored packages - - >name of the package -> mouse right button, run package.
But the same executes perfectly from visual studio, where it is developed.
what could be the reason?
Hi everyone,first time here, so I'm sorry if this has been covered already agesago. :(I am trying to learn T-SQL and Stored Procedures and bought the bookon these topics by Djan Sunderic, Publisher McGraw Hill/Osborne. I'malready stuck on my first Stored Procedure and getting error messagesthat I cannot understand. I've already tried Google and Microsoftonline to no avail. I do have the .NET Framework on my system and useit for programming in C# sometimes and by the looks of the error, it'ssomething to do with that? Please note I am only using SQL ServerExpress.Here is the first Stored Procedure:SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE ap_HelloASBEGINSET NOCOUNT ON;SELECT 'Hello world'SELECT * from dbo.EqTypeENDGOThe error in its entirety is this:Msg 6522, Level 16, State 1, Procedure ctrd_DDL_PROCEDURE_EVENTS_vb,Line 1A .NET Framework error occurred during execution of user definedroutine or aggregate 'ctrd_DDL_PROCEDURE_EVENTS_vb':System.UnauthorizedAccessException: Access to the path 'c:server_login.log' is denied.System.UnauthorizedAccessException:at System.IO.__Error.WinIOError(Int32 errorCode, StringmaybeFullPath)at System.IO.FileStream.Init(String path, FileMode mode, FileAccessaccess, Int32 rights, Boolean useRights, FileShare share, Int32bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, StringmsgPath, Boolean bFromProxy)at System.IO.FileStream..ctor(String path, FileMode mode,FileAccess access, FileShare share, Int32 bufferSize, FileOptionsoptions)at System.IO.StreamWriter.CreateFile(String path, Boolean append)at System.IO.StreamWriter..ctor(String path, Boolean append,Encoding encoding, Int32 bufferSize)at System.IO.StreamWriter..ctor(String path, Boolean append)at VbTriggers.Triggers.trigger_DDL_PROCEDURE_EVENTS() ..The statement has been terminated.Can anyone assist please? :(Many thanks in advance,Lara
View 3 Replies View RelatedThis CLR stored procedure executes without fail 99% of the time. However, occasionally it will fail with the following error:
A .NET Framework error occurred during execution of user-defined routine or aggregate "Run_SRS_Report": System.Exception: Attempt to perform native server operation (AllocateNativeRequest) outside of its valid scope.
Below is the section of code that fails:
<code>
Private Shared Sub GetReportParameters()
Dim drReportParameters As SqlDataReader
Try
' set the parameters for the command request.
_SQLCommandRequest = _SQLConnection.CreateCommand()
_SQLCommandRequest.CommandText = _spReportParms
_SQLCommandRequest.CommandType = CommandType.StoredProcedure
' get the information for the data reader request.
drReportParameters = _SQLCommandRequest.ExecuteReader
' make sure that we have something first.
If Not drReportParameters Is Nothing Then
' find out if we have any rows returned.
If drReportParameters.HasRows Then
' read each of the rows looking for the respective value.
While drReportParameters.Read
' make sure that we can get the appropriate code id.
If (Not IsDBNull(drReportParameters.Item("Code_ID"))) AndAlso (Not IsDBNull(drReportParameters.Item("Display_Text"))) Then
' set the parameters for each of the following internal variables.
Select Case drReportParameters.Item("Code_ID").ToString
Case Is = "PDFP Path"
_FileLocationPDFP = drReportParameters.Item("Display_Text").ToString
Case Is = "PDF Temp Path"
_FileLocationPDFTemp = drReportParameters.Item("Display_Text").ToString
Case Is = "LogFile Path"
'''_SqlPipe.Send("Path from sys codes: " & drReportParameters.Item("Display_Text").ToString)
_FileLocationLogFile = Path.Combine(drReportParameters.Item("Display_Text").ToString, "SRSReportLog_" & Now.ToString("HHmmss") & ".txt")
Case Is = "LogFile Flag"
_swLogFlag = IIf(drReportParameters.Item("Display_Text").ToString = "False", False, True)
Case Is = "Delete PDF"
_DeletePDFFlag = IIf(drReportParameters.Item("Display_Text").ToString = "False", False, True)
Case Is = "PrintTool"
_PrintTool = drReportParameters.Item("Display_Text").ToString
Case Is = "BPP Path"
_BppPath = drReportParameters.Item("CharVar1").ToString
Case Is = "SendToPrinter"
_SendToPrinterFlag = IIf(drReportParameters.Item("Display_Text").ToString = "False", False, True)
Case Else
' ignore it.
End Select
End If
End While
End If
End If
Catch ex As Exception
' throw a new exception to trip up the PrintReport() function.
Throw New Exception(ex.Message)
Finally
' make sure that we close out the datareader, regardless.
If Not drReportParameters Is Nothing Then
If Not drReportParameters.IsClosed Then drReportParameters.Close()
End If
End Try
End Sub
</code>
Any ideas why this would fail only occasionally (maybe 1% of the time it's executed)?
When I execute a stored procedure it outputs the expected value, but also throws the following exception.
Arithmetic overflow error converting expression to data type int.
The 'usp_TicketCreate' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be returned instead.
Any help would be appreciated, at the moment I am just catching the exception in my code and ignoring it, but I would like to get rid of the exception all together.
Thanks for the help.
SBProgrammer
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Any ideas for this issue?
Thanks a lot
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
View 2 Replies View RelatedHi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedHello,
I have a web application that I kick off a DTS package. I tested the package and it works fine. However, when running the package through ASP.NET, I get the following error:
Type mismatch. (mscorlib (80004005): Missing parameter does not have a default value. Parameter name: parameters)
I've traced it to a dynamic task step. I have this as the first step in the workflow, but for some reason, it is executing last. Which is definitely not the place where I want it. Is there anyway I can force it, or why is it doing that?
Any ideas?
Brian
Hi Friends
I am trying to execute the DTS package from the T-Sql
Its basically Exporting the table from Sql Server to tab delimited text file
DECLARE @Command varchar(1000)
declare @partcode varchar(100)
set @command = 'DTSRun /S "servername" /U "username" /P "password" /N "TabFormat" /G "{459784D8-0170-400C-8919-AC25423D7F34}" /W "0" '
EXEC master..xp_cmdshell @Command
It Comes up with the Following Error
output
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
Error Detail Records:
Error: 3 (3); Provider Error: 3 (3)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
NULL
(22 row(s) affected)
Vic
Hi,
I am having trouble executing a package as a job in SQL Server 2005. I can run the package fine manually from sql server but when I create a job for that package and run the job I get an error that says
The package execution failed. The step failed.
I am completely lost at this point. Any help would be greatly appreciated.
Thanks
Brian
Is it possible to execute a package in a trigger or stored procedure ?
View 3 Replies View RelatedCan some one point me in the right direction? I need to execute a DTS package after a set of T-SQL statements run in a stored procedure. The starting of the DTS package needs to be the last thing executed/called from the stored procedure.
Thanks