I have a table with several datetime fields but they all list just the correct date. The time is always 12:00:00 AM. I don't have a field that records the actual time a record was created. I have a timestamp column, but it appears to get updated everytime the DB backs up. Is there a way using the date fields I have or otherwise, to determine the time a record was created?
View 1 RepliesI have not yet succeeded in getting an aswer to this in a previous post, so I'll try again and rephrase the question
I have 2 fields, 1 called 'Created' the other 'Updated'
I would like to create a function, user procedure ,whatever in SQL something along the lines of...
FUNCTION myUID()
RETURN Date(Today)+Time(Now)+USERNAME
END FUNCTION
so that the value returned by the above pseudo code is something like '20080526T21:01:05.620SamL' where the date part is in yyyy0m0d format
I have got this working fine for the default 'Created' field but the calculated (and persisted) field comes up with something about being non-deterministic and refuses to play
Clearly something along these lines is a very straightforward requirement (I have it working fine in my 20+ year old database) , but have spent a week trying to get an answer (even from this forum) without success, so would be grateful for any help that you can provide me with to get round this barrier
Hi
Can anyone advise me as to how I can add the date and time to 2 columns in the sql server database for each record that is added. I'd prefer not to use the webform. Can sql server add the date automatically to the row?
thanks
I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
Hi all,
(I am using SQL Server 2005)
I have created a new 'CUSTOMERS' table and created a colum 'CustomerID' as an Identity column.
Now, a problem I find is that when I delete a particular record, its Identity value is used automatically for the New record I insert later!
I do not want to re-use the already used Identity value.
I just want to have the last CustomerID to be higher that all the previous ones.
Is there any way to do this?
Thanking you in advance,
Tomy
Hello,
I have created a package that check if a table exist otherwise it drop it, then it creates a new one (both with SSIS execute SQL task).
Then a Flow task run some transformation SSIS to load the table just created.
The problem is that when I run the package an error occur telling me that the table does not exist (if runs for the first time and in this case the table has not created yet).
How can I run a package that create a table and then Load it.
Thank
Hi,
I would like to know as to how can I put a Current Date & Time stamp on a FILE NAME automatically which is created by a DTS package.
E.g. I create a file named ABC.TXT daily. How do I get this file to have the current Date stamp so that the file name is ABC121201.TXT without any user intervention.
Thanks for the help!
I need to write down a sql query wherein in one particular day(user will enter manually), i need to find out a 15 minutes slot wherein purchase order's created or updated are the highest.
i.e. out of 96 slots(15 minute slot each)-I need to find the slot which has maximum number of Purchase orders created or updated.
I would like to return the latest time stamp as well as the earliest time stamp out of a series of records.The key would be the same ID so i need a function or query that can search through each record and find the earliest time for that ID and the latest time.
ID LatestTime EarliestTime
1 05:00:00 02:00:30
I have achieved the latest time by using a RowNumber function and returning the latest record. The stickler is how to find the earliest record as well.
Code:
CREATE TABLE [dbo].[DigiTracker](
[DigitrackID] [int] IDENTITY(1,1) NOT NULL,
[contact_id] [int] NOT NULL,
[Code]....
-- not accurate b/c it returns 0 for all TimePerPageSec
SELECT DATEDIFF(second,min(createDt),max(createDt)) AS TimePerPageSec
FROM DigiTracker
GROUP BY contact_id, ZinePageNumber
time spent (in seconds) between each record
I have about 20 scripts to run as
exec script1 ...
exec script20
I want to know how long does each of the script piece take. So how can I keep the records of time spent and save them as a file or save them into a table?
Hi everyone:Using Sql Server SQL 8I'm trying to INSERT records into a "can software package" batchtable. I have a work-table that mimics the batch table. Aftermanipulating the records in the work-file I want to INSERT them intothe batch table.The problem is the batch table in the can software has a trigger onthe batch table which is going to force me to INSERT one record at atime. I've always been able to do an INSERT with no problem.The batch table has pretty basic columns:BatchIDBatchDateSeqNumberThese three fields are the key and then just some miscellaneouscolumns. Any easy way to loop thru my work-file to insert theserecords. Never done a loop in SQL so an example would be reallyreally appreciated. I have a sequence number so I was hoping to do aWhile loop but I really don't know enough about creating a loop tomake that call. Thanks in advance for any help.
View 6 Replies View RelatedWe have a website that allows people to enter tasks and they are then given a stageID. ie 1 which is review for when they are first entered into our database. If they have not been reviewed in 5 minutes I want them to update automatically and move onto the next stage. I have tried using a stored procedure that adds the reocrd with a waitfor command but that doesn't work because it locks the connection ofcourse until it's finished the stored procedure which means the webpage doesn't come back for 5 minutes which we don't need. I'm asking if there is any other way I can do this without a waitfor command or somehow use it so that it doesn't hold the current connection.
Thanks for your help
Jason
hello everyone
I have table that look like
CREATE TABLE GuestAccount
(
Id_Guest smallint,
SeqNo int IDENTITY(1,1),
account money Null
PRIMARY KEY(Id_Guest,SeqNo)
)
Q?
I want my SeqNo start from 1 for new Id_Guest
is it possible ?
tnanks
I am not sure how to go about doing this. I have a record that has a start time of 1 am and a stop time of 9pm (same day for simplicity) and I want to know how many hours during a peek time and how many were not.
For example, the application starts and inserts into the data base the start time of 1am and then the user stops the app at 9pm. Lets say the peek hours are 1pm to 7pm. I know i can do a date diff function to get how long the app ran for but how can I get the amount of hours it ran during the peek time? I know there has to be some mathematical solution to this but it is escaping me at the moment. I want to do this over many records so a a cte or pivot table is the end solution for performance.
I have a date/time value (dd/MM/yyyy HH:mm:ss) stored in a field as part of each record in a dataset.
I would like to achieve the following via a single T-SQL query if possible (efficiency is not an issue as the dataset is small)
On query run;
Check if any records in the dataset are within 10 minutes + or - of the current system time (using the date/time value referenced above)
if none
Load the first record
Dear all,
This is a beginner's question so bear with me - I have a SSIS package that builds an Analysis Services fact table - depending on user input, this table is either re-built from scratch or any additional records since it was last run are created.
Where is the best place to store the time a package was last run - in a seperate table in the database or somewhere in the fact table?
Sam
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
Hi! Is there a way to delete a record from multiple tables at the same time? Thanks for the help!
View 6 Replies View RelatedHi Fellow Listers:
Working with SQL 7 and Visual Basic 5.0:
We have experienced a lock situation and we do not know how it happened nor how to solve it:
When trying to update a record we get the following message.
Run time Error 3197:
The Microsoft Jet Database engine stopped the process because you and another user are attempting to change the same data at the same time.
And for sure, ONLY one user is connected at the time.
Apparently, the record is marked and can be read but CAN NOT be updated.
Fortunately the record CAN be deleted !!!
The only way we found was using the VISDATA.exe that comes with Vbasic, to delete the record and add a new record with the same information.
Since this condition makes any updating program to be aborted, it's a big problem.
How this happened?
Is there any way to prevent this?
Is there a way to detect this in advance?
Is there a way to correct this situation automatically, such as rebuild or check the Data Base?
Your advise will be greatly appretiated
TIA
Gerardo Alvarez
asaca@asaven.com
asaca@telcel.net.ve
Bienvenido a nuestro Site en http://www.asaven.com
Hi, I'm newbie in SQL, could somebody tell me how do I walk through a table one record at a time without using a cursor please.
Greatly appreciated.
Ann
I want to check a record in my table which has time ins and time outs feilds. I want to check on insertionof any new record that a new record should not be inserted on same timings and before 45 mins of timein and after 45 mins of timeout. How do i do it sql query ?
View 1 Replies View RelatedI'm writing a classic ASP application that records all logging of userlogins on our support site. The logging is a rolling window of how manypeople have logged in for a given month, i.e. tracked by a 'lastlogin'field so the tracking is done in a date range. So, for the month ofJanuary I would record lastlogin dates between January 1 and January31. My question is this...on the last day of the month (example beingJanauary)at 23:59:59PM I want to write the total number of users thathad a lastlogin date within the month of January and write that totalnumber to another table so I have a point-in-time figure for Januarylogins and how many users logged in in the month of January. How do Ido that? How can I have the sql server dynamically check the last dayof each month at 23:59:59PM and then run that query to obtain the totalnumbers users that logged in and then record that value to anothertable?? Do I use a SQL Job to do that?Any help would be greatly appreciated! Thanks!
View 1 Replies View RelatedI have the table with the similar set of records which mentioned below, find the time difference between two rows of record. By Using the MsgOut column i have to find time taken b/w PS & PV and some record doesnt have PV .
LogID LocIDClientCert MsgType MsgOutMessageTimeStamp System
1151334934NOT SPECIFIEDQ_T12PS 2015-10-01 00:00:40.980AHR
1151335243NOT SPECIFIEDD_T12PV 2015-10-01 00:00:53.800AHR
1151342944NOT SPECIFIEDQ_T12PS 2015-10-01 00:05:40.957AHR
1151343281NOT SPECIFIEDD_T12PV 2015-10-01 00:05:53.670AHR
1151350046NOT SPECIFIEDQ_T12PS 2015-10-01 00:10:40.970AHR
1152760563759NOT SPECIFIEDQ_T12PS 2015-10-01 15:28:29.617AHR
1152760739690NOT SPECIFIEDQ_T12PS 2015-10-01 15:28:33.633AHR
How to delete a single record from 2 tables at a time.
View 3 Replies View Relatedhello,
I am trying to insert date and time into my table.
insert into <table_name> values('12/12/2006','12:23:04');
but it displays error at " ; "
can anyone help me to figure out the problem
Thanks a lot in advance.
Regards,
Sweety
I am trying to pull the records which are being affected i.e, comparing the values and if not same then populating the record.
I am using the below condition in where clause however i am getting runt time error as "Conversion failure when converting date and/or time from character string"
Condition in Where clause:
cast(isNull(tab1.Col1,'') as datetime) <> cast(isNull(tab2.col1,'') as datetime)
Note: Both col1 columns are of type nvarchar
I am trying to write a stored procedure that loops through the list of user tables, gets the record count for each one and write a record to an audit table with DATE, TABLENAME, RECORDCOUNT.I keep getting an error "Conversion failed when converting date and/or time from character string".Here is the script...
DECLARE @table nvarchar(500)
DECLARE @sql nvarchar(520)
DECLARE CursorSelect CURSOR FOR
select table_name from INFORMATION_SCHEMA.tables where table_name not like 'sys%' order by table_name
[code]....
I have a table with following data
(Id, date ,time)
11 2015/8/1
12:20:00
11
2015/8/1 12:21:00
11 2015/8/1
18:05:20
12 2015/8/1
11:20:00
12 2015/8/1
11:21:00
12 2015/8/1
18:10:20
I need the table with following record only
(Id, date ,time)
11 2015/8/1
12:20:00
11 2015/8/1
18:05:20
12 2015/8/1
11:20:00
12 2015/8/1
18:10:20
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
Hi folks.
Here i have small problem in transactions.I don't know how it is happaning.
Up to my knowldge if you start a transaction in side the transaction if you have DML statements
Those statements only will be effected by rollback or commit but in MS SQL SERVER 7.0 and 6.5
It is rolling back all the commands including DDL witch it shouldn't please let me know on that
If any one can help this please tell me ...........Please............
For Example
begin transaction t1
create table t1
drop table t2
then execute bellow statements
select * from t1
this query gives you table with out data
select * from t2
you will recieve an error that there is no object
but if you rollback
T1 willn't be there in the database
droped table t2 will come back please explain how it can happand.....................
Email Address:
myself@ramkistuff.8m.com
I have a client who needs to copy an existing sale. The problem isthe Sale is made up of three tables: Sale, SaleEquipment, SaleParts.Each sale can have multiple pieces of equipment with correspondingparts, or parts without equipment. My problem in copying is when I goto copy the parts, how do I get the NEW sale equipment ids updatedcorrectly on their corresponding parts?I can provide more information if necessary.Thank you!!Maria
View 6 Replies View RelatedHi
I have a table with a user column and other columns. User column id the primary key.
I want to create a copy of the record where the user="user1" and insert that copy in the same table in a new created record. But I want the new record to have a value of "user2" in the user column instead of "user1" since it's a primary key
Thanks.