Give Solution Using Stored Procedure?

Feb 29, 2008

username      work_date               no_of_working_hours(nvarchar)
a                02/17/2008                  0:50 
a                02/18/2008                  0:50
a                02/23/2008                  0:20
b                02/18/2008                  0:30

b                02/23/2008                  0:30
b                02/24/2008                  0:30 
suppose i pass work_date from 02/18/2008 to 02/23/2008.

i want following result
 username     total_no_of_working_hours(nvarchar)
a                      1:10
b                      1:00 
How to write stored procedure?
Thanks,
Durai 
 
 

View 7 Replies


ADVERTISEMENT

Anyone Give Solution(stored Procedure)?

Feb 28, 2008

 Table:Questionforum_id   quest_id          question                               description         quest_raised_by    raised_date             alert_me     approval  no_of_hits16             1    What is diff between asp and asp.net?    <Binary data>    JOHNYJP        2/27/2008 5:32:38 PM      True        True       NULL4               1     test question?                                     <Binary data>    SAMUEL        2/25/2008 12:25:05 PM      False        True       317             1    diff between asp.net1.0 and 2.0?            <Binary data>    MICHEL        2/27/2008 6:07:56 PM         False        True        315             2    What is diff vb6&vb.net?                        <Binary data>    MICHEL        2/27/2008 6:32:52 PM         True        True          514             1    what are features available?                   <Binary data>    RAGAVAN        2/26/2008 12:11:06 PM    True        True          915             1    VB6 tutorial..                                       <Binary data>    RAGAVAN        2/26/2008 12:12:29 PM       True        True        NULL14             2    Tell about access?                               <Binary data>    RAGAVAN        2/26/2008 12:14:09 PM       False       True         514             3    how to create grath in excel?                <Binary data>    SAMUEL        2/26/2008 12:23:31 PM        True        True          714             4    test1                                                  <Binary data>    MICHEL        2/27/2008 6:34:08 PM           True        True          24               2    new quest?                                        <Binary data>    SAMUEL        2/27/2008 6:38:20 PM          True        True           18               1    test quest for html?                            <Binary data>    GANESH        2/27/2008 6:41:07 PM          True        True         NULL4               3    test html tag2                                   <Binary data>    GANESH        2/27/2008 6:44:24 PM           False        True           NULL8               2    hello its for test?                              <Binary data>    MICHEL        2/27/2008 6:46:13 PM              False        True          NULL21             1    What is the new feature ?                  <Binary data>    SAMUEL        2/28/2008 9:30:43 AM            False        True         NULL22             1    What is the new feature ?                 <Binary data>    SAMUEL        2/28/2008 9:32:14 AM             True        True       NULL23             1    Is orcas released?                            <Binary data>    SAMUEL        2/28/2008 9:33:18 AM            True        True           NULL16             2    Test page for html code!!!!!!!....           <Binary data>    SAMUEL        2/28/2008 9:36:50 AM           True        True           417             2    explain with details?                         <Binary data>    SAMUEL        2/28/2008 4:46:08 PM             True        True         NULLTable:Replyforum_id   quest_id          ans_id     answer          reply_by        reply_on                    alert_me14        3                           12    <Binary data>    MICHEL    2/28/2008 3:57:46 PM    True4         1                               8    <Binary data>    GANESH    2/27/2008 4:46:52 PM    NULL15        2                            13    <Binary data>    SAMUEL    2/28/2008 4:20:36 PM    False4         2                             14    <Binary data>    SAMUEL    2/28/2008 4:46:39 PM    False14        3                            15    <Binary data>    GANESH    2/28/2008 4:49:12 PM    True14        2                           16    <Binary data>    GANESH    2/28/2008 4:50:01 PM    False16        2                           17    <Binary data>    GANESH    2/28/2008 4:51:02 PM    True17        1                            9    <Binary data>    MICHEL    2/27/2008 6:08:32 PM    NULL17        1                           10    <Binary data>    SAMUEL    2/27/2008 6:25:40 PM    NULL16        2                             11    <Binary data>    SAMUEL    2/28/2008 9:40:41 AM    NULLThis is my table structure.when i pass value only to 'quest_raised_by' field in question table.but I want following result,suppose i pass quest_raised_by='SAMUEL'forum_id   quest_id   quest_raised_by  ans_id   no_of_reply      answer          reply_by        reply_on                    alert_me      4                    1       SAMUEL                 8            1          <Binary data>    GANESH        2/27/2008 4:46:52 PM    NULL14                   3      SAMUEL                 15           2        <Binary data>    GANESH        2/28/2008 4:49:12 PM    True4                     2    SAMUEL                 14            1        <Binary data>    SAMUEL        2/28/2008 4:46:39 PM    False21                   1    SAMUEL                  -              0            -    -        -            -22                   1    SAMUEL                 -                0            -    -        -            -23                  1    SAMUEL                  -                0            -    -        -            -16                  2    SAMUEL                   17            2        <Binary data>    GANESH        2/28/2008 4:51:02 PM    True17                  2    SAMUEL                  -                0            -    -        -            -Any one give storedprocedure as soon as posible.Thanks,Durai            

View 4 Replies View Related

Any Solution For This??Please Give Some Suggestions

Dec 11, 2001

I have started working with MS SQL Server 2000 recently. I have a scenario in which I require to know within the given period of time ( say 5 mins) , which all tables from a particular database got modified. I do not want to write a trigger for each and every table for all the 13 databases , my application deals with. I have even tried the following query:
declare @curdate datetime
select @curdate=getdate()
select name, refdate from sysobjects
where xtype = 'U' and refdate =@curdate

But nope it does not help me, since refdate is something else. Can anybody tell me how can you figure out from sysobjects when was a particular object last accessed , even this would serve my purpose.

I have trying to get this done via profiler. My applications api's connect to the database under some credentials which i do not know since I do not have access to source code ( i am doing black box testing). So I can't even put a trace on one particular user account. What I am doing currently is trapping all store procedure events..., but then its too much of work...

Hence I wanted to know , is there any way out for the situation where given a database name and a time span we can find out the tables modified/accessed within that time span from that database ???

View 3 Replies View Related

How Do I Give EXECUTE Permissions On Stored Procedures?

Sep 20, 2007

Hey guys,I'm pretty new to SQL configuration, and I need to give EXECUTEpersmissions for one of the SQL user roles. I am running SQL 2005Management Studio Express - free version. I found the list of mystored procedures, but I can not locate any permissions screen. Cansomeone help point me in the right direction? Thanks!

View 7 Replies View Related

Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)

Nov 1, 2007

Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly.  For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') 
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). 
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
 

View 1 Replies View Related

Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?

Mar 3, 2008

Hi all,

I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):

(1) /////--spTopSixAnalytes.sql--///

USE ssmsExpressDB

GO

CREATE Procedure [dbo].[spTopSixAnalytes]

AS

SET ROWCOUNT 6

SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName

FROM LabTests

ORDER BY LabTests.Result DESC

GO


(2) /////--spTopSixAnalytesEXEC.sql--//////////////


USE ssmsExpressDB

GO
EXEC spTopSixAnalytes
GO

I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////

Public Class Form1

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")

Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)

sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure

'Pass the name of the DataSet through the overloaded contructor

'of the DataSet class.

Dim dataSet As DataSet ("ssmsExpressDB")

sqlConnection.Open()

sqlDataAdapter.Fill(DataSet)

sqlConnection.Close()

End Sub

End Class
///////////////////////////////////////////////////////////////////////////////////////////

I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)

Please help and advise.

Thanks in advance,
Scott Chang

More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.




View 11 Replies View Related

T-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure

Nov 14, 2014

I am new to work on Sql server,

I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.

Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.

View 1 Replies View Related

SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?

Jan 29, 2015

I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?

CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],

[Code] ....

View 9 Replies View Related

Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.

Sep 19, 2006

I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.

How do I do that? Articles, code samples, etc???

View 1 Replies View Related

SOLUTION! - VB.NET 2005 Express And SQL Server 2005 - NOT Saving Updates To DB - SOLUTION!

Nov 30, 2006

VB.NET 2005 Express and SQL Server 2005 Express - NOT saving updates to DB - SOLUTION!

-----------------------------------

The following article is bogus and confusing:

How to: Manage Local Data Files - Setting 'Copy to Output Directory' to 'Do not copy'
http://msdn2.microsoft.com/en-us/library/ms246989.aspx

You must manually copy the database file to the output directory
AFTER setting 'Copy to Output Directory' to 'Do not copy'.

Do not copy








The file is never copied or overwritten by the project system. Because your application creates a dynamic connection string that points to the database file in the output directory, this setting only works for local database files when you manually copy the file yourself.

You must manually copy the database file to the output directory
AFTER setting 'Copy to Output Directory' to 'Do not copy'.

-----------------------------------

The above article is bogus and confusing.

This is rediculous!

This is the most vague and convoluted bunch of nonsince I've ever come accross!

Getting caught out on this issue for the 10th time!
And not being able to find an exact step-by-step solution.

--------------------------

I've tried it and it doesn't work for me.

Please don't try what the article eludes to as I'm still sorting out exactly what is supposed to be happening.



If you have a step-by-step procedure that can be reproduced this properly please PM me.

I would like to test its validity then update this exact post as a solution rather than just another dicussion thread.

Many thanks.



This is the exact procedure I have come up with:

NOTE 1: DO NOT allow VB.net to copy the database into its folders/directorys.

NOTE 2: DO NOT hand copy the database to a folder/directory in your project.

Yes, I know its hard not to do it because you want your project nice and tidy.
I just simply could NOT get it to work.
You should NOT have myData.mdf listed in the Solution Explorer. Ever.

Create a folder for your data following NOTE 2.

Copy your data to that folder. * mine was C:mydatamyData.mdf



Create a NEW project.

Remove any Data Connections. ( no matter what)

Save it.

Data | View Data Sources

Add New Data Source

select NEW CONNECTION ( No Matter what, do it!

Select the database. * again mine was C:mydatamyData.mdf

Answer NO to the question:
Would you like to copy the file to your project and modify the connection?
- NO ( no matter what - ANSWER NO ! - Absolutely NO )
Then select the tables you want in the DataSet.
and Finish.



To Test ----------

From the Solution Explorer | click the table name drop down arrow | select details
Now Drag the table name onto the form.

The form is then populated with a Navigation control
and matching Labels with corresponding Textboxes for each field in the table.

Save it.

1) Run the app.

Add one database record to the database by pressing the Add(+) icon

Just add some quick junk data that you don't mind getting lost if it doesn't save.

YOU MUST CLICK THE SAVE ICON to save the data you just entered.

Now exit the application.

2) Run the app again.

And verify there is one record already there.

Now add a second database record to the database by pressing the Add (+) icon.

NOW add some quick junk data that you WILL intentionally loose.

*** DO NOT *** press the save icon.

Just Exit the app.

3) Again, Run the app.

Verify that the first record is still there.

Verify that the Second record is NOT there.
Its NOT there because you didn't save the data before exiting the app.

Proving that YOU MUST CLICK THE SAVE ICON to save the data you just entered.

Also proving you must add your own code to catch the changes
and ask the user to save the data before exitiing or moving to another record.

As a side note, since vb.net uses detached datasets,
(a copy/snapshot of the dataset in memory and NOT directly linked to the database)
the dataset will reflect all changes made when moving around the detached datasets.
YOU MUT REMEMBER TO SUBMIT YOUR CHANGES TO THE DATABASE TO SAVE THEM.
Otherwise, they will simply be discarded without notice.

Whewh!

I hope this saves me some time the next time I want to start a new database project.

Oh, and uh, for anyone else reading this post.

Thanks,
Barry G. Sumpter

Currently working with:
Visual Basic 2005 Express
SQL Server 2005 Express

Developing Windows Forms with
101 Samples for Visual Basic 2005
using the DataGridView thru code
and every development wizard I can find within vb.net
unless otherwise individually stated within a thread.

View 17 Replies View Related

Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page

Dec 28, 2005

I have a sub that passes values from my form to my stored procedure.  The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page.  Here's where I'm stuck:    Public Sub InsertOrder()        Conn.Open()        cmd = New SqlCommand("Add_NewOrder", Conn)        cmd.CommandType = CommandType.StoredProcedure        ' pass customer info to stored proc        cmd.Parameters.Add("@FirstName", txtFName.Text)        cmd.Parameters.Add("@LastName", txtLName.Text)        cmd.Parameters.Add("@AddressLine1", txtStreet.Text)        cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue)        cmd.Parameters.Add("@Zip", intZip.Text)        cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text)        cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text)        cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text)        cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text)        cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text)        ' pass order info to stored proc        cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue)        cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue)        cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue)        'Session.Add("FirstName", txtFName.Text)        cmd.ExecuteNonQuery()        cmd = New SqlCommand("Add_EntreeItems", Conn)        cmd.CommandType = CommandType.StoredProcedure        cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc)   <-------------------------        Dim li As ListItem        Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar)        For Each li In chbxl_entrees.Items            If li.Selected Then                p.Value = li.Value                cmd.ExecuteNonQuery()            End If        Next        Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder)  and pass that to my second stored procedure (Add_EntreeItems)

View 9 Replies View Related

SQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?

Sep 26, 2014

I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure

at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT

I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT

View 3 Replies View Related

System Stored Procedure Call From Within My Database Stored Procedure

Mar 28, 2007

I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.

How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?

Thanks in advance

View 9 Replies View Related

Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure

Jan 23, 2008



Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio

What could explain this?

Obviously,

All three scenarios are executed against the same database and hit the exact same tables and indices.

Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).

The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes

View 1 Replies View Related

User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net

Sep 13, 2007

Hi all,



I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.



Whenever I tried to right click stored procedure and select step into store procedure> i get following error



"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"



I am not sure what needs to be done on sql server side



We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.

Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?



Please advise..

Thank You

View 3 Replies View Related

Is The Transaction Context Available Within A 'called' Stored Procedure For A Transaction That Was Started In Parent Stored Procedure?

Mar 31, 2008

I have  a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
 Any help on this would be appreciated.

View 1 Replies View Related

Calling Stored Procedure Fromanother Stored Procedure

Oct 10, 2006

Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames

View 16 Replies View Related

Use Resultset Returned From A Stored Procedure In Another Stored Procedure

Nov 15, 2006

I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
 Thanks,
Kevin

View 3 Replies View Related

SQL Stored Procedure Issue - Search Stored Procedure

May 18, 2007

This is the Stored Procedure below -> 
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 4/2/2007 4:52:19 PM ******/
 
CREATE  PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
 
IF (@i_WildCardFlag=0)BEGIN
 SET @SQLString='SELECT       Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count,   Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By,   Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status,   Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status,  Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails,   BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType  FROM           Batch  INNER JOIN   BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE  ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND  ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND  ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <=  @V_ToDateTime )) AND  Batch.Archived_Status = 1 '
 if (@V_BatchStatus IS not null) begin  set @SQLString=@SQLString + ' AND   (Batch.Status_Code in ('+@V_BatchStatus+'))' end
 if (@V_BatchType IS not null) begin  set @SQLString=@SQLString + ' AND   (BatchTemplate.Batch_Type  in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT       Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count,   Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By,   Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status,   Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status,  Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails,   BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType  FROM           Batch  INNER JOIN  BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE  ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND  ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND  ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <=  @V_ToDateTime )) AND  Batch.Archived_Status = 1 '
 if (@V_BatchStatus IS not null) begin  set @SQLString=@SQLString + ' AND   (Batch.Status_Code in ('+@V_BatchStatus+'))' end
 if (@V_BatchType IS not null) begin  set @SQLString=@SQLString + ' AND   (BatchTemplate.Batch_Type  in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
 
 
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
 
Please help me regarding the same.
 
Thanks in advance.
 
Sandeep Kumar
 

View 2 Replies View Related

Sql Count Using Stored Procedure Withing Stored Procedure

Apr 29, 2008

I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks

View 10 Replies View Related

Exec Twp Stored Procedure In A Main Stored Procedure

Apr 29, 2004

Hi there

i have a stored procedure like this:

CREATE PROCEDURE SP_Main

AS
SET NOCOUNT ON

BEGIN TRANSACTION

exec SP_Sub_One output

exec SP_Sub_Two output


IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran

return
GO


now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.

now i can put the "begin transation" in the two sub stored procedure's. The problem is

what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"

now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data

how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.

Thanks in advance

Mahmoud Manasrah

View 1 Replies View Related

Calling A Stored Procedure Or Function From Another Stored Procedure

Mar 2, 2007

Hello people,

When I am trying to call a function I made from a stored procedure of my creation as well I am getting:

Running [dbo].[DeleteSetByTime].

Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.

No rows affected.

(0 row(s) returned)

@RETURN_VALUE =

Finished running [dbo].[DeleteSetByTime].

This is my function:

ALTER FUNCTION dbo.TTLValue

(

)

RETURNS TABLE

AS

RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'

This is my stored procedure:

ALTER PROCEDURE dbo.DeleteSetByTime

AS

BEGIN



SET NOCOUNT ON



DECLARE @TTL int

SET @TTL = dbo.TTLValue()



DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)

END

CreatedTime is a datetime column and TTL is an integer column.

I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.

Your help is much appreciated.

View 6 Replies View Related

Execute Stored Procedure From Stored Procedure With Parameters

May 16, 2008

Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY

CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC

Any assistance would be greatly appreciated.
Thank you,
Dave

View 6 Replies View Related

Stored Procedure In Database X, Executes Stored Procedure In Database Y, Wrapped In Transaction?

Jul 20, 2005

Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?

View 1 Replies View Related

SqlDataSource.SelectParameters Causing Procedure Or Function Stored Procedure Has Too Many Arguments Specified.

Sep 12, 2006

 Hi everybody,   I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005 
Stored procedure:

Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;

Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End


oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">&quot;@CatId&quot;</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;

gdvCategories.DataBind(); &lt;&lt;--- Error occured here


 

View 1 Replies View Related

Gridview / SqlDataSource Error - Procedure Or Function &<stored Procedure Name&> Has Too Many Arguments Specified.

Jan 19, 2007

Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure  in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.

View 9 Replies View Related

SQL Server 2012 :: CLR Procedure Takes Ages To Pass TVP To Stored Procedure?

Jan 21, 2014

On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.

The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.

For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.

I changed the procdure to do nothing (return 1 in first line).

So with all parameters set from

command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end

it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.

When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)

SP:StmtCompleted -- Encrypted Text.

As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.

View 5 Replies View Related

How Can I Assign A Stored Procedure As Cursor's Data Source In AStored Procedure?

Oct 8, 2007

How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?

Something like this:

CREATE PROCEDURE TestHardDisk
AS
BEGIN

DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source

OPEN CURSOR HardDisk_Cursor


FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space

WHILE @@FETCH_STATUS = 0
BEGIN

...
END
END

View 6 Replies View Related

Help With TSQL Stored Procedure - Error-Exec Point-Procedure Code

Nov 6, 2007

I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?

------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...


Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24

Error converting data type varchar to numeric.

------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...


EXEC [dbo].[sp_SearchCandidatesAdvanced]

@LicenseType = 4,

@PositionType = 4,

@BeginAvailableDate = '10/10/2006',

@EndAvailableDate = '10/31/2007',

@EmployerLatitude = 29.346675,

@EmployerLongitude = -89.42251,

@Radius = 50

GO

------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...


set ANSI_NULLS ON

set QUOTED_IDENTIFIER ON

go



ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]

@LicenseType int = 0,

@PositionType int = 0,

@BeginAvailableDate DATETIME = NULL,

@EndAvailableDate DATETIME = NULL,

@EmployerLatitude DECIMAL(10, 6),

@EmployerLongitude DECIMAL(10, 6),

@Radius INT


AS


SET NOCOUNT ON


DECLARE @v_SQL NVARCHAR(2000)

DECLARE @v_RadiusMath NVARCHAR(1000)

DECLARE @earthRadius DECIMAL(10, 6)


SET @earthRadius = 3963.191


-- SET @EmployerLatitude = 29.346675

-- SET @EmployerLongitude = -89.42251

-- SET @radius = 50


SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius




SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +

'Round(' + @v_RadiusMath + ', 0) AS Distance ' +

'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +

'WHERE ' + @v_RadiusMath + ' <= ' + @Radius


IF @LicenseType <> 0

BEGIN

SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType

END


IF @PositionType <> 0

BEGIN

SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType

END


IF LEN(@BeginAvailableDate) > 0

BEGIN

SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate

END


--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'


PRINT(@v_SQL)

EXEC(@v_SQL)


-----------------------------------------------------------------------------------------------------------------

View 4 Replies View Related

Procedure Or Function 'stored Procedure Name' Expects Parameter Which Was Not Supplied

Mar 26, 2007

Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
 
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
 
Thanks Nickdel68

View 5 Replies View Related

(Could Not Find Stored Procedure ''.) When Calling A User Defined Procedure

Feb 4, 2008

Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d    

View 3 Replies View Related

Stored Procedure In Query Analyzer Vs Linked Procedure In MS Access

Jan 12, 2007

For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.

ddave

View 2 Replies View Related

Access Result Set From Storede Procedure W/in A Stored Procedure

Jan 24, 2004

Hi All

I have a stored procedure, sp_GetNameDetail, which return a one row, multiple columns result set.

Yet I have another storede procedure which would call sp_GetNameDetail, and would like to access this result set. Is there a way I can do this?

Thanks,

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved