Go And Goto In One Sql Script Gives Error Label Not Declared

Jan 15, 2007

Hi,

I have a problem:
I am writing an update script for a database and want to check for the
version and Goto the wright update script.

So I read the version from a table and if it match I want to "Goto
Versionxxx"

Where Versionxxx: is set in the script with the right update script.

Whenever I have some script which need Go commands I get error in the
output that

A GOTO statement references the label 'Versionxxx' but the label has
not been declared.

But the label is set in the script by 'Versionxxx:'

Is there a way I can solve this easily?

Thanks in advance

View 5 Replies

Goto Statement In DTS ?

Jan 2, 2007

Hello,

Can anyone plz tell me how to use GoTo statement in DTS packages ?

Thanks in advance !

View 1 Replies View Related

Is It Possible To Use Twice Declared. Variable Names- KILL And After Declared. Variable

May 1, 2008

is it possible to use twice declared. Variable names-
declared. Variable and after KILL
and use the same declared. Variable
like

DECLARE

@StartDate datetime

KILL @StartDate datetime (remove from memory)
use after with the same name

i have 2 big stored PROCEDURE
i need to put one after one
and psss only 1 Variable name to the second stored PROCEDURE
like this i don't get this error

The variable name '@Start_Date' has already been declared. Variable names must be unique within a query batch or stored procedure.

Msg 134, Level 15, State 1, Line 146

The variable name '@End_Date' has already been declared. Variable names must be unique within a query batch or stored procedure.
i use like
KILL @endDate ??
KILL @StartDate ??

TNX

View 12 Replies View Related

Use GOTO To Skip Part Of A Script?

Nov 11, 1998

I have a script that creates and populates several tables. However I only want this to occur if one table has a row count greater than zero. I'm trying to use GOTO to script to the end of the script. However I get the message "A GOTO statment references the label 'MYLABEL' but the label has not been declared." How can I do this.

I have something similiar to the following in my script:
IF (SELECT COUNT(*) FROM MYTABLE) = 0
BEGIN
PRINT 'NO ROWS FOUND'
GOTO MYLABEL
END

CREATE TABLE X...

SELECT INTO X FROM Y ...

ETC. ETC.

MYLABEL:
PRINT 'END SCRIPT'

View 2 Replies View Related

T-SQL (SS2K8) :: Catch Block With GOTO Statement?

Mar 6, 2014

I have a Stored Proc which populates a table and then uses BCP to output the table into a flat file and lastly ftp the file out to a remote site.

I'm trying to update the error handling as I first wrote this script on SQL2000 and it has now moved to SQL2008r2. The stored proc looks something like this:

BEGIN TRY
BEGIN TRANSACTION
<A whole bunch of inserts and updates>
COMMIT TRANSACTION
END TRY
BEGIN CATCH
<Error handling>
ROLLBACK TRANSACTION
END CATCH
BEGIN
<xp_cmdshell, BCP, FTP stuff>
END

What I need to do is jump to the end of the script if an error invokes the CATCH block, so the xp_cmdshell stuff is not exicuted. Can I simply put a GOTO statement to take it to the end in the CATCH block, or do I have to set a variable in the CATCH block then test the variable outside the CATCH block or indeed is there a better way to simply terminate the script following the ROLLBACK?

[URL]

View 7 Replies View Related

Error When Reading The Label Field From Report Parameters

Aug 16, 2007

Hi there,

I am trying to fill a Textbox with the Label-Field from the Report Parameters. The Multi-Value-Option is checked and it is possible to select multi-values from the time hierarchy [Time].[Year - Half Year - Quarter - Month].

For example you can choose:
"Calendar 2007" ([Time].[Year - Half Year - Quarter - Month].[Year].&[2007-01-01T00:00:00])
"Quarter 4, 2006" ([Time].[Year - Half Year - Quarter - Month].[Quarter].&[2006-10-01T00:00:00])
and "April 2006" ([Time].[Year - Half Year - Quarter - Month].[Month].&[2006-04-01T00:00:00])

Now I want to fill a Textbox with the chosen parameter values by putting following expression as value of the textbox:

Parameters!TimeYearHalfYearQuarterMonthDate.Label ... with "TimeYearHalfYearQuarterMonthDate" as the name of the DataSet.

That gives an Error.

Can you please help me out?

Best regards
Claudio

View 6 Replies View Related

Error When Setting Map Document Label In A Group Of A Table

May 21, 2007

Hi,

I try to activate the map document control on my report. My Report is composed of a table in which I group by 2 criterias. When I set the document map label of the first entry of the group list then I get an error on the preview :

"An internal error occurred on the report server. See the error log for more details. "

Can someone tell where can I find the error log file ?

thanks in Advance.

View 3 Replies View Related

Getting SqlDbType Not Declared

Nov 6, 2007

How do I dim SqlDbType in my code?Dim conn As New Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("TrainUserConnectionString").ConnectionString)
Dim cmd As New Data.SqlClient.SqlCommandWith cmd
.Connection = conn
.CommandType = Data.CommandType.StoredProcedure
.CommandText = "UpdateTopicscmd.Parameters.Add("@classificationID", SqlDBType.Int)cmd.Parameters.Add("@TitleID", SqlDBType.Int)
conn.Open()
For Each item As ListItem In CheckBoxList1.Items
If item.Selected Thencmd.Parameters("@classificationID").Value = item.Valuecmd.Parameters("@TitleID").Value = DropDownList1.SelectedValue
cmd.ExecuteNonQuery()
End If
Next
conn.Close()
End WithEnd Sub
End Class

View 1 Replies View Related

SqlStatementSourceType Is Not Declared

Mar 26, 2008

I have simple SSIS package with only ScriptTask. Script was copied from MSDN:

Code Snippet

Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask

...

Public Sub Main()

Dim pkg As Package = New Package()

Dim exec1 As Executable = pkg.Executables.Add("STOCK:SQLTask")

Dim th As TaskHost

th = CType(exec1, TaskHost)

Dim myVar As Variable = pkg.Variables.Add("myVar", False, "User", 100)

th.Properties("SqlStatementSourceType").SetValue(th, SqlStatementSourceType.Variable)
...

Last line shows error - 'SqlStatementSourceType' is not declared.
Well, Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask is imported so SqlStatementSourceType should be visible. I don't see microsoft.sqlserver.sqltask.dll in task's references and can't add it because Add Reference doesn't show this DLL.

Could you please forward me in right direction?

Thank you,
Alexander

View 9 Replies View Related

Set Value For Variable In A Declared Cursor

Feb 16, 2004

Hi,

I have a problem on setting the value for the variable in a declared cursor. Below is my example, I have declared the cursor c1 once at the top in a stored procedure and open it many times in a loop by setting the variable @str_var to different values. It seems the variable cannot be set after the cursor declared. Please advise how can I solve this issue.

------------------------------------------------------------------------
DECLARE @str_var VARCHAR(10)
DECLARE @field_val VARCHAR(10)

DECLARE c1 CURSOR LOCAL FOR
SELECT field1 FROM tableA WHERE field1 = @str_var

WHILE (Sometime TRUE)
BEGIN

....

SET @str_var = 'set to some values, eg. ABC123, XYZ123'

OPEN c1

FETCH c1 INTO @field_val

WHILE (@@fetch_status != -1)
BEGIN

PRINT @field_val
...

FETCH c1 INTO @field_val
END

CLOSE c1

END

DEALLOCATE c1

----------------------------------------------------------------------

Thanks a lots,
Vincent

View 4 Replies View Related

Type 'adCmdStoredProc' Is Not Declared

Jul 20, 2005

I am trying to set up a "cmd.CommandType = adCmdStoredProc" but Ireceive the error "Type 'adCmdStoredProc' is not declared". What do Ineed to do to declare it? I am using MSDE with SQLDataAdapter. I amtrying to exceute a stored procedure from within my VB .NET 2003 code.Thanks.JH

View 5 Replies View Related

Using Declared Variables In SQL INSERT Statement.

Feb 3, 2007

I am new to scripting in general and I've run into an issue when attempting to write a VB variable to a database table in SQL Express. I am trying to record the value of the variable to the db, but it does not appear that the value is being passed to SQL. If I hard code the values in the SQL statement it works fine. Can someone explain what I'm doing wrong accomplish this? My code is below. Thanks in advance.
file.aspx
<asp:SqlDataSource ID="SqlDataSource" runat="server"
ConnectionString="<%$ ConnectionStrings:SqlConnectionString %>"
SelectCommand="SELECT * FROM [Table]"
InsertCommand="INSERT INTO [Table] (field1, field2) VALUES (& variable1 &, & variable2 &);" >
</asp:SqlDataSource>
file.aspx.vb
Protected Sub Button_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button.Click
Dim variable1 As String = FileUpload.FileName
Dim variable2 As String = Date.Now
Dim path As String = Server.MapPath("~/directory/)
If FileUpload.HasFile = True Then
Try
SqlDataSource.Insert()
FileUpload.PostedFile.SaveAs(path & _
FileUpload.FileName)
End Try

End If

End Sub

View 8 Replies View Related

Cursor Declared With Variable In Where Clause

Nov 17, 1999

When I execute next query on sqlserver 6.5 nested in stored procedure I can see that 'open testCursor' selected rows using new value of @var. When I execute query on sqlserver 7.0 I can see that 'open testCursor' selected rows using value of @var before 'declare ... cursor'. Is there any way to force sqlserver 7.0 to proccess cursor like it did it before.

select @var = oldValue

declare testCursor cursor
for select someColumns
from someTable
where someColumn = @var

select @var = newValue

open testCursor

fetch next from testCursor into @someColumns

Thank's in advance.

Mirko.

View 2 Replies View Related

Substringing Declared Varables In SQL Server

May 20, 1999

I need to be able to update a row of data in a table based upon the first character of a char(50) field.

if char(1) of employee_Job_class = "X" then update field Class_description = "Temporary"

Anyone have any suggestions ??

View 3 Replies View Related

Problem Returning A Declared Variable

Mar 14, 2005

when I run this sproc all I get out of it is "the commands completed successfully" and doesn't return the value. If anyone can point out where the error is I would really appreciate it. Thanks

Code:

Create Procedure LookupLeagueIdByUserName(@userName as varchar(40) = '') as
begin
if (@userName = '')
raiserror('LookupLeagueIdByUserName: Missing parameters', 16,1)
else
begin
Declare @leagueId int
Set @leagueId = -1

--Check if the username belong to a player
Select @leagueId = leagueId From Users u
inner join players p on p.userId = u.userId
inner join teams t on p.teamId = t.teamId
where u.userName = @userName

if (@leagueId > 0)
begin
return @leagueId
end
else
begin
--Check if the username belong to a teamUser
Select @leagueId = leagueId From Users u
inner join teamUsers tu on tu.userId = u.userId
inner join teams t on tu.teamId = t.teamId
where u.userName = @userName

if (@leagueId > 0)
begin
return @leagueId
end
else
begin
--Check if the username belong to a leagueUser
Select @leagueId = leagueId From Users u
inner join leagueUsers lu on lu.userId = u.userId
where u.userName = @userName

if (@leagueId > 0)
begin
return @leagueId
end
else
begin
--username is not in db or is an admin user
return -1
end
end
end
end
end
return
-- when I run this I get no results returned
LookupLeagueIdByUserName 'chris'

View 2 Replies View Related

Declared Hard Coded Variables

Jun 3, 2015

declare @StartTime nvarchar(10)= '12:00'
declare @EndTime nvarchar(10)= '12:45'
declare @Diff time(1) = cast(@EndTime as datetime) - cast(@StartTime as datetime)

How to I use Column names instead of Hard coding variables - e.g. '12:00'

View 9 Replies View Related

Stored Procedure Using A Declared Cursor

Nov 15, 2007

I need to write a stored procedure using T-SQL to declare a cursor for containing id(staff_no), names and specialism of all doctors that have specialism, The contents of the cursor then are to be displayed using a loop and print statement to give a formatted display of the output of each record within the cursor.

The doctors table has the following columns with specialism allowing NULL values

doctor
(
staff_no CHAR(3),
doctor_name CHAR(12),
position CHAR(15),
specialism CHAR(15),
PRIMARY KEY(staff_no)
)

Any help would be greatly appreciated.

View 11 Replies View Related

Script Component Name Ouput0Buffer Is Not Declared???

Mar 26, 2007

Doing a simple test with a script component in a DataFlow to transform some data from a flat file. I have new columns under the default Ouput 0 .. however in my code when I try this, I get the above error.

Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Output0Buffer.AddRow()

End Sub

There will of course be a lot more code in the Script Component, but not clear on why I can't reference it.

View 2 Replies View Related

Obtaining Collation Length Of Declared Variable Within SP

Jun 12, 2008

Morning All,Can I have some help with this one please, I am having to make a fixed length text file based on information from the DBDeclare @EDIString varchar(MAX)Declare @RecordType varchar(2)Declare @RegistrationMark varchar(7)Declare @Model_Chassis varchar(11)Declare @LocationCode Varchar(4)Declare @MovementDate varchar(8)Declare @IMSAccountCode varchar(5)Declare @MovementType varchar(8)Declare @NotUsed1 Varchar(28)Declare @NotUsed2 varchar(7)Select @RecordType = RecordType, @RegistrationMark = RegistrationMark, @Model_Chassis = Model_And_Chassis, @LocationCode = LocationCode, @MovementDate = MovementDate, @IMSAccountCode = IMSAccountCode, @Movementtype = MovementTypeCode from Fiat_OutBoundOnce I have selected the information from the DB I need to ensure that each field is the correct length. I therefore want to pass the variable and the length of the variable into a function to return the correct length.So if location Code = 'AB' this needs to be four characters long so want to pass it into a function and return 'AB 'As I need to do this for 70+ variables is there an easy way to obtain the length of the collation for the variable?regardsTom

View 1 Replies View Related

Select Declared Variable With Case Statements

Apr 19, 2008

I am trying to gather counts for table imports made for files from friday - sunday and create a variable that will be the body of an email.
I'd like to use either a case statement or a while statement since the query is the same but the values must be collected for each day (friday, saturday and sunday) and will all be included in the same email.

I have declared all variables appropriately but I will leave that section of the code out.

Select @ifiledate = iFileDate from tblTelemark where
iFileDate = CASE
WHEN iFileDate = REPLACE(CONVERT(VARCHAR(10), GETDATE()-3, 101), '/','') THEN

Select @countfri1 = Count(*) from tbl1
Select @countfri2 = Count(*) from tbl2
Select @countfri3 = Count(*) from tbl3
Select @countfri4 = Count(*) from tbl4

WHEN iFileDate = REPLACE(CONVERT(VARCHAR(10), GETDATE()-2, 101), '/','') THEN
Select @countsat1 = Count(*) from tbl1
Select @countsat2 = Count(*) from tbl2
Select @countsat3 = Count(*) from tbl3
Select @countsat4 = Count(*) from tbl4

WHEN iFileDate = REPLACE(CONVERT(VARCHAR(10), GETDATE()-1, 101), '/','') THEN
Select @countsun1 = Count(*) from tbl1
Select @countsun2 = Count(*) from tbl2
Select @countsun3 = Count(*) from tbl3
Select @countsun4 = Count(*) from tbl4

END

Is there a way to do what this that works???

View 3 Replies View Related

How Do I Asign A Textbox In A Rdlc Report A Declared Value?

Apr 8, 2007

Hi all..

I developed a local report to be viewed using the "Report Viewer" control. The report is attached to an object data source.

All works perfectly, now I want to display a declared value (from the form containing the report viewer) in a textbox. Like:

Dim NofDays as string

Me.ReportViewer1.LocalReport.textbox6.text = NofDays

I ve tried a lot of options like using the report paramaters but I cannot get it to work.

Does aneyone have a clue?

Thankzzzzzz

Juststar

View 5 Replies View Related

How To Call A Variable Declared In Parent Package

Nov 16, 2007

I have declared a variable XYZ in Parent package
Similarly I have declared ABC in Child package and have done the configuration.
I have assigned some value to XYZ
How to get the value in Child Package.

View 6 Replies View Related

Reporting Services :: Create A Report With Declared Value

Sep 16, 2015

I use BIDS 2008 R2 and I have a SQL script that works fine and gives me the desired output in SQL Management studio.

declare @dt datetime
select @dt = '2015-09-10 08:23:28.000'
select
   ref_id
   ,desn
   ,tran_date
   ,payment_due
   ,ref1
   ,gross_val
   from acptran (nolock) where seq_id in (select seq_id from acptcash (nolock) where date_time = @dt)
order by ref_id,ref1

However i need to create a report so that someone else can enter the date time as a parameter in a report to get the required results. Normally i would drop my SQL script into BIDS and it would create the dataset but as this has a declared value it gives an error "The Declare SQL construct or statement is not supported."

View 9 Replies View Related

Using Declared Variable As Passphrase Slows Query

Mar 13, 2008

I have two tables - gift_cards and history - each related by a field called "card_number". This field is encrypted in the history table but not in the gift_cards table. Let's say the passphrase is 'mypassphrase'. The following query takes about 1 second to execute with a fairly large amount of data in both tables:

SELECT max([history].[date_of_wash]) AS LastUse

FROM gift_cards AS gc LEFT JOIN history

ON gc.card_number=CAST(DecryptByPassPhrase('mypassphrase', HISTORY.CARD_NUMBER) AS VARCHAR(50))

GROUP BY gc.card_number

When I use a declared variable to contain the passphrase, the same query takes over 40 seconds. For example,

declare @vchPassphrase as nvarchar(20)

select @vchPassphrase = 'mypassphrase'

SELECT max([history].[date_of_wash]) AS LastUse

FROM gift_cards AS gc LEFT JOIN history

ON gc.card_number=CAST(DecryptByPassPhrase(@vchPassphrase, HISTORY.CARD_NUMBER) AS VARCHAR(50))

GROUP BY gc.card_number

This query is part of a stored procedure and, for security reasons, I can't embed the passphrase in it. Can anyone explain the discrepancy between execution times and suggest a way to make the second query execute faster?

Thanks,
SJonesy

View 4 Replies View Related

Can Varbinary And Varchar Lengths Be Declared Dynamically?

Mar 25, 2008

I just learned that bit masking a varbinary column can increase it's length in bytes unnecessarily. For example, I ran the following...

declare @v1 varbinary(max)

set @v1 = 0x0100AB

select len(@v1)

set @v1 = @v1 | (len(@v1) - 2) * 256

select master.dbo.fn_varbintohexstr(@v1)

select len(@v1)
...and get
3
0x00000000000101ab
8

This messes up a plan I had for varbinary column use.

So I quickly tried the following to look for strategies to deal with this unwanted growth...thought being that while I'm passed a varbinary(max), operating on a varbinary that matches its passed length would avoid the unwanted growth after bit masking....

declare @i int

set @i = 5

declare @v2 varbinary(@i)

...but got errors.

So I suppose I can use a combo of the len, substring etc functions to correct the situation after bit masking but would like to know if the more elegant approach of dynamically sizing a varbinary is possible in t-sql, or if perhaps there is a way to prevent the unwanted growth during bit masking.

View 6 Replies View Related

SQL Server 2012 :: Finding Procedures That Use Declared Table Variables?

Oct 22, 2014

know a way to find all stored procedures that use declared or temp tables, i.e

Declare @temptable TABLE as....

Create table #temptable

View 8 Replies View Related

Trouble Porting A Trivially Simple Function - With Declared Variables

Aug 4, 2006

Here is one such function:CREATE FUNCTION my_max_market_date () RETURNS datetimeBEGINDECLARE @mmmd AS datetime;SELECT max(h_market_date) INTO @mmmd FROM holdings_tmp;RETURN @mmmd;ENDOne change I had to make, relative to what I had working in MySQL, wasto insert 'AS' between my variable and its type. Without 'AS', MS SQLinsisted in telling me that datetime is not valid for a cursor; and Iam not using a cursor here. The purpose of this function is tosimplify a number of SQL statements that depend on obtaining the mostrecent datetime value in column h_market_date in the holdings_tmptable.The present problem is that MS SQL doesn't seem to want to allow me toplace that value in my variable '@mmmd'. I could do this easily inMySQL. Why is MS SQL giving me grief over something that should be sosimple. I have not yet found anything in the documentation for SELECTthat could explain what's wrong here. :-(Any ideas?ThanksTed

View 6 Replies View Related

SQL Server 2012 :: Looping Through Rows And Append Values To A Declared Variable

Apr 3, 2014

I want to loop through rows and append values to a declared variable. The example below returns nothing from Print @output, it's as if my @output variable is being reset on every iteration.

declare @i int,@output varchar(max)
set @i = 1
while @i < 10
begin
set @output = @output + convert(varchar(max),@i) + ','
print @output
set @i = @i +1
end

View 6 Replies View Related

SQL 2012 :: Number Of Variables Declared In INTO List Must Match That Of Selected Columns

Apr 28, 2015

I am getting error [[Msg 16924, Level 16, State 1, Line 13

Cursorfetch: The number of variables declared in the INTO list must match that of selected columns.]] when i execute below script.

Declare @mSql1 Nvarchar(MAX)
declare @dropuser int
declare @dbname Nvarchar(max)
declare @username Nvarchar(max)

DECLARE Dropuser_Cursor CURSOR FOR

[Code] ....

View 9 Replies View Related

Stored Procedure Using A Declared Variable In Insert Query (inline Or Using EXEC)

May 14, 2008

Hello,

I have a stored procedure where I run an insert statement. I want to knwo if it is possible to do it using a variable for the table name (either in-line or with an EXEC statement without building a string first and executing that string. See examples of what I am talking about in both cases below:

I want to be able to do this (with or without the EXEC) :
------------------------------------------------------------------------------------

DECLARE @NewTableNameOut as varchar(100)

Set @NewTableNameOut = 'TableToInsertInto'

EXEC(
Insert Into @NewTableNameOut
Select * From tableToSelectFrom
)

------------------------------------------------------------------------------------

I can not do the above because it says I need to declare/set the @NewTableNameOut variable (assuming it is only looking at this for the specific insert statement and not at the variable I set earlier in the stored procedure.

I can do it like this by creating a string with the variable built into the string and then executing the string but I want to know if I can do it like I have listed above.

------------------------------------------------------------------------------------

DECLARE @NewTableNameOut as varchar(100)

Set @NewTableNameOut = 'TableToInsertInto'

EXEC(
'Insert Into ' + @NewTableNameOut + ' ' +
'Select * From tableToSelectFrom'
)

------------------------------------------------------------------------------------

It is not an issue for my simple example above but I have some rather large queries that I am building and I want to run as described above without having to build it into a string.

Is this possible at all?

If you need more info please let me know.

View 1 Replies View Related

SqlDataSource, DataView, CType Function && Page_Load-Compilation ErrorBC30451: Name 'SqlDataSource3' Is Not Declared.

Nov 7, 2006

Hi all,
In my VWD 2005 Express, I created a website "AverageTCE" that had Default.aspx, Default.aspx.vb and App_Code (see the attached code) for configurating a direct SqlDataSource connection to the dbo.Table "LabData" of  my SQL Server 2005 Express "SQLEXPRESS" via SqlDataSource, DataView, CType Function and the Page_Load procedure. I executed the website "AverageTCE" and I got Compilation ErrorBC30451: Name 'SqlDataSource3' is not declared:

Server Error in '/AverageTCE' Application.

Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30451: Name 'SqlDataSource3' is not declared.Source Error:

Line 8: <DataObjectMethod(DataObjectMethodType.Select)> _
Line 9: Public Shared Function SelectedConcentration() As ConcDB
Line 10: Dim dv As DataView = CType(SqlDataSource3.Select(DataSourceSelectArguments.Empty), DataView)
Line 11: dvConcDB.RowFilter = "Concentration = '" & ddlLabData.SelectedValue & "'"
Line 12:
Source File: C:Documents and Settingse1enxshcMy DocumentsVisual Studio 2005WebSitesAverageTCEApp_CodeConcDB.vb    Line: 10 //////////--Default.aspx--//////////////////////////
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>SQL DataSource</title>
</head>
<body>
<form id="form1" runat="server">

<div>
Average TCE<br />
<asp:DropDownList ID="DropDownList1" runat="server" AutoPostBack="True" DataSourceID="SqlDataSource2"
DataTextField="SampleID" DataValueField="SampleID">
</asp:DropDownList><asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ChemDatabaseConnectionString2 %>"
SelectCommand="SELECT [SampleID] FROM [LabData]"></asp:SqlDataSource>
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="SampleID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="SampleID" HeaderText="SampleID" ReadOnly="True" SortExpression="SampleID" />
<asp:BoundField DataField="SampleName" HeaderText="SampleName" SortExpression="SampleName" />
<asp:BoundField DataField="AnalyteName" HeaderText="AnalyteName" SortExpression="AnalyteName" />
<asp:BoundField DataField="Concentration" HeaderText="Concentration" SortExpression="Concentration" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="ddlLabData" runat="server" ConnectionString="<%$ ConnectionStrings:ChemDatabaseConnectionString %>"
SelectCommand="SELECT * FROM [LabData] WHERE ([SampleID] = @SampleID)">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" DefaultValue="3" Name="SampleID"
PropertyName="SelectedValue" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<br />
<asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:ChemDatabaseConnectionString3 %>"
SelectCommand="SELECT * FROM [LabData]"></asp:SqlDataSource>
<br />
<br />
LabData-Analyte: 
<asp:TextBox ID="TextBox1" runat="server"></asp:TextBox><br />
<br />
LabData-Conc:
<asp:TextBox ID="TextBox2" runat="server"></asp:TextBox><br />
<br />
Average values:  
<asp:Label ID="Label1" runat="server" Text="lblAverageValue"></asp:Label><br />
<br />
<br />
<br />

</div>
</form>
</body>
</html>
///////////--Default.aspx.vb--////////////////////////////////
Partial Class _Default
Inherits System.Web.UI.Page
End Class
////////////////--App_Code/ConcDB.vb--//////////////////////
Imports Microsoft.VisualBasic
Imports System.ComponentModel
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
<DataObject(True)> Public Class ConcDB
<DataObjectMethod(DataObjectMethodType.Select)> _
Public Shared Function SelectedConcentration() As ConcDB
Dim dv As DataView = CType(SqlDataSource3.Select(DataSourceSelectArguments.Empty), DataView)
dvConcDB.RowFilter = "Concentration = '" & ddlLabData.SelectedValue & "'"
Dim dvRow As DataRowView = dvConcDB(0)
Dim ConcDB As New ConcDB
ConcDB.SelectedConcentration = CDec(0)("Concentration")
Return ConcDB
End Function
Call AverageValue (Conc1)
Public Shared Function AverageValue(ByVal Conc1 As Decimal)
Dim AverageConc As Decimal
AverageConc = (Conc1 + 22.0) / 2
Return AverageConc
End Function
End Class
**************************************************************
I have 2 questions to ask:
1) How can I fix this Compilation Error BC30451: Name 'SqlDataSource3' is not declared?
2) I just read MSDN Visual Studio 2005 Technical Article "Data Access in ASP.NET 2.0" and I saw the following thing:
    Types of Data Sources:
      SqlDataSouirce:   The configuration of a SqlDataSoure is more complex then that of the AccessDataSource, and is intended
                                     for enterprise applications that require the features provided by a true database management system
                                      (DBMS).
    I am using the website application in VWD 2005 Express to do the task of extracting data values from the Tables of SQL Server 2005 Express via .NET Framwork, ASP.NET 2.0 and VB 2005 programming. Can VWD 2005 Express be configured to SQL Server 2005 Express (SQLEXPESS) for the SqlDataSource connection and do the data-extraction task via DataView, CType Function and the Page-Load procedure?
Please help, respond and answer the above-mentiopned 2 questions.
Many Thanks,
Scott Chang

View 2 Replies View Related

Update Statement Using Declared Variable Produces Unexpected Results On SQL Server 2005

Aug 7, 2007

We are getting unexpected results from the following update statement when it is executed on SQL Server 2005.

The strange thing is that we get duplicated values for QM_UID (although when run under SQL Server 2000 we don't get duplicated values)

Can anyone explain why this happens or suggest another way of populating this column without using a cursor or adding a temporary autoincrement column and copying the values over?

declare @NextID int;

set @NextID = 1;

update tmp set QM_UID=@NextID, @NextID = @NextID + 1;

select QM_UID, count(*) from tmp group by QM_UID having count(*) > 1 order by QM_UID

QM_UID count(*)

25 2
26 3
27 4
28 4
29 4
30 4
31 4
32 4
33 4
34 4
35 5
36 4
37 4
38 4
39 4
40 3

...

--- Script to replicate problem

-- NB: The number of rows that must be added to tmp before this problem will occur is machine dependant

-- 100000 rows is sufficient on one of our servers but another (faster) server doesn't show the error

-- at 100000 rows but does at 1000000 rows.

-- Create a table

CREATE TABLE tmp (
[QM_ADD_OP] [char](6) DEFAULT '' NOT NULL,
[QM_ADD_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_ADD_TIME] [int] DEFAULT -1 NOT NULL,
[QM_EDIT_OP] [char](6) DEFAULT '' NOT NULL,
[QM_EDIT_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_EDIT_TIME] [int] DEFAULT -1 NOT NULL,
[QM_LOCK_OP] [char](6) DEFAULT '' NOT NULL,
[QM_QUOTE_JOB] [smallint] DEFAULT 0 NOT NULL,
[QM_QUOTE_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_JOB_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_PRJ_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_NUMBER] [char](12) DEFAULT '' NOT NULL,
[QM_REV_NUM] [char](6) DEFAULT '' NOT NULL,
[QM_REV_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REV_TIME] [int] DEFAULT -1 NOT NULL,
[QM_REV_OPR] [char](6) DEFAULT '' NOT NULL,
[QM_STYLE_CODE] [char](4) DEFAULT '' NOT NULL,
[QM_REP_JOB_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_REP_COLUMN] [smallint] DEFAULT 0 NOT NULL,
[QM_REP_PART] [char](6) DEFAULT '' NOT NULL,
[QM_REP_MODEL] [smallint] DEFAULT 0 NOT NULL,
[QM_REP_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_MODEL_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_RUN_NUM] [int] DEFAULT 0 NOT NULL,
[QM_SOURCE_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_SOURCE_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_SOURCE_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_SOURCE_PART] [char](6) DEFAULT '' NOT NULL,
[QM_SOURCE_MODEL] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_ORIG_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_ORIG_PART] [char](6) DEFAULT '' NOT NULL,
[QM_COPY_JOB] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_COLUMN] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_J_PART] [char](6) DEFAULT '' NOT NULL,
[QM_COPY_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_Q_PART] [char](6) DEFAULT '' NOT NULL,
[QM_JOINT_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_QUOTE_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_JOB_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_LIVE_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_USER_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_DEL_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_IS_CONVERTED] [smallint] DEFAULT 0 NOT NULL,
[QM_PRINTED] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_RATES] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_UPDATE] [smallint] DEFAULT 0 NOT NULL,
[QM_CRED_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CRED_TIME] [int] DEFAULT -1 NOT NULL,
[QM_CRED_AMT] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_CRED_OP] [char](6) DEFAULT '' NOT NULL,
[QM_HELD] [smallint] DEFAULT 0 NOT NULL,
[QM_PROOF] [char](12) DEFAULT '' NOT NULL,
[QM_DELIV_METHOD] [char](12) DEFAULT '' NOT NULL,
[QM_ART_METHOD] [char](12) DEFAULT '' NOT NULL,
[QM_DES_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_REC_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REC_TIME] [int] DEFAULT -1 NOT NULL,
[QM_OWN_OP] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_RESP_TIME] [int] DEFAULT -1 NOT NULL,
[QM_RESP_OP] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_1] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_2] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_3] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_4] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_5] [char](6) DEFAULT '' NOT NULL,
[QM_RECONTACT] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REQ_FLAG] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_ORIG_TIME] [int] DEFAULT -1 NOT NULL,
[QM_PREF_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_PREF_TIME] [int] DEFAULT -1 NOT NULL,
[QM_LATE_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_LATE_TIME] [int] DEFAULT -1 NOT NULL,
[QM_TITLE] [char](72) DEFAULT '' NOT NULL,
[QM_DELIV_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_CLT_SPEC] [char](12) DEFAULT '' NOT NULL,
[QM_TAX_REF] [char](22) DEFAULT '' NOT NULL,
[QM_CONTACT] [char](36) DEFAULT '' NOT NULL,
[QM_PHONE] [char](22) DEFAULT '' NOT NULL,
[QM_FAX] [char](22) DEFAULT '' NOT NULL,
[QM_ORDER] [char](20) DEFAULT '' NOT NULL,
[QM_ORDER_CFM] [smallint] DEFAULT 0 NOT NULL,
[QM_ORDER_REL] [char](6) DEFAULT '' NOT NULL,
[QM_REP] [char](12) DEFAULT '' NOT NULL,
[QM_REP_1] [char](12) DEFAULT '' NOT NULL,
[QM_REP_2] [char](12) DEFAULT '' NOT NULL,
[QM_REP_3] [char](12) DEFAULT '' NOT NULL,
[QM_REP_4] [char](12) DEFAULT '' NOT NULL,
[QM_REP_5] [char](12) DEFAULT '' NOT NULL,
[QM_COORDINATOR] [char](12) DEFAULT '' NOT NULL,
[QM_PRIORITY] [smallint] DEFAULT 0 NOT NULL,
[QM_TYPE_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_GRADE] [smallint] DEFAULT 0 NOT NULL,
[QM_FIN_SIZE_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_FIN_WID] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_LEN] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_DEP] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_GUSS] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_GSM] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_ORIENT] [smallint] DEFAULT 0 NOT NULL,
[QM_PROD_CODE] [char](22) DEFAULT '' NOT NULL,
[QM_FIN_GOOD] [char](22) DEFAULT '' NOT NULL,
[QM_CUST_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_CODE_1] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_CODE_2] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_PROS] [smallint] DEFAULT 0 NOT NULL,
[QM_REQD_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REQD_TIME] [int] DEFAULT -1 NOT NULL,
[QM_FOLIO] [char](12) DEFAULT '' NOT NULL,
[QM_FOLIO_1] [char](12) DEFAULT '' NOT NULL,
[QM_FOLIO_2] [char](12) DEFAULT '' NOT NULL,
[QM_PACK_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_USAGE] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_REORDER] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_EACH_WGT] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_WGT_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_RFQ_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_RFQ_TIME] [int] DEFAULT -1 NOT NULL,
[QM_RFQ_OPR] [char](6) DEFAULT '' NOT NULL,
[QM_SALES_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_SALES_SRC] [char](12) DEFAULT '' NOT NULL,
[QM_SALES_RSN] [char](12) DEFAULT '' NOT NULL,
[QM_PROFILE] [char](12) DEFAULT '' NOT NULL,
[QM_JOB_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_PREV_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_JOB_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_PO_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_PO_TIME] [int] DEFAULT -1 NOT NULL,
[QM_PO_OP] [char](6) DEFAULT '' NOT NULL,
[QM_DLY_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_DLY_TIME] [int] DEFAULT -1 NOT NULL,
[QM_QTY_DESP] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_TOTAL_DLY] [int] DEFAULT 0 NOT NULL,
[QM_SCHED_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_SCHED_TIME] [int] DEFAULT -1 NOT NULL,
[QM_CLOSE_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CLOSE_TIME] [int] DEFAULT -1 NOT NULL,
[QM_INV_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_PACK_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_DOWN_LOAD] [smallint] DEFAULT 0 NOT NULL,
[QM_TRACK_CODE] [char](4) DEFAULT '' NOT NULL,
[QM_TAX_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_TAX_CODE] [char](6) DEFAULT '' NOT NULL,
[QM_CURR] [char](6) DEFAULT '' NOT NULL,
[QM_EXCH_RATE] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_UNIT_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_UNIT_FLAG] [smallint] DEFAULT 0 NOT NULL,
[QM_RUNON_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_SPEC_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_CHARGEABLE] [smallint] DEFAULT 0 NOT NULL,
[QM_NC_REASON] [char](22) DEFAULT '' NOT NULL,
[QM_CUST_MKUP] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_JOB_MKUP] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_BROKERAGE] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_CUST_DISC] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_INVOKED_BTNS] [int] DEFAULT 0 NOT NULL,
[QM_IMPORTED] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_RECALC] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_CONVERT] [smallint] DEFAULT 0 NOT NULL,
[QM_BRANCH] [char](6) DEFAULT '' NOT NULL,
[QM_CODE] [char](36) DEFAULT '' NOT NULL,
[QM_TEMPLATE] [smallint] DEFAULT 0 NOT NULL,
[QM_REPEAT_PERIOD] [int] DEFAULT 0 NOT NULL,
[QM_REOPEN_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CAT_OPTION] [char](16) DEFAULT '' NOT NULL,
[QM_UNIT_ID] [char](10) DEFAULT '' NOT NULL,
[QM_PROD_BRANCH] [char](6) DEFAULT '' NOT NULL,
[QM_UID] [int] DEFAULT 0 NOT NULL,
[QM_AVAIL_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_AVAIL_TIME] [int] DEFAULT -1 NOT NULL
) ON [PRIMARY]

GO

-- Create an index on the table

CREATE unique INDEX [QM_NUMBER_ORDER] ON tmp([QM_QUOTE_JOB], [QM_NUMBER]) ON [PRIMARY]

GO

-- Populate the table

declare @Counter as int

SET NOCOUNT ON

set @Counter = 1

while @Counter < 100000

begin

insert into tmp (QM_ADD_TIME, QM_NUMBER) values (1,@Counter);

set @Counter = @Counter + 1

end

GO

-- Update QM_UID to a sequential value

declare @NextID int;

set @NextID = 1;

update tmp set QM_UID=@NextID, @NextID = @NextID + 1;

-- Find rows with a duplicate QM_UID (there should be no duplicate)

select QM_UID, count(*) from tmp group by QM_UID having count(*) > 1 order by QM_UID

--drop table tmp

-- output from select @@VERSION

-- Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86) Mar 23 2007 16:28:52 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)

View 4 Replies View Related

SQL Server 2012 :: Variable Declared For Inserting Records Is Setting To Empty From Second Execution Onward?

Jul 9, 2015

I am facing a strange problem in executing stored procedure. Basically my sproc will take a values from Java application and create a Insert statement. see stored procedure below.Just to give some more background- I am re writing the procedure which was written in oracle already.

Problem I am facing now is with the statement below . When I execute the procedure for first time it works fine however when I execute for second time onwards it is setting to empty. Not sure what is the problem with my declaration and setting up with values. For reference I have pasted my complete stored procedure code below.

select @L_STMT= 'INSERT INTO '+ @l_table_name + '(' + LTRIM(RTRIM((substring (@L_INS_STMT,2,len(@L_INS_STMT))))) + ') VALUES (' + LTRIM(RTRIM((substring (@L_INS_STMT1,2,len(@L_INS_STMT1))))) +')';
ALTER PROCEDURE [dbo].[PKG_OBJ_API$CREATE_OBJ]
(
@P_TYPE VARCHAR(4000),
@P_SCOPE VARCHAR(4000),
@Arrlist varchar(max),

[code]....

View 3 Replies View Related