Going Back After Jump To Report
Dec 6, 2007
Hi,
I jumped from one report to enter (useing the "jump to report" option).
How can I go back to the first report?
I tried with the "backspace" button and I tried useing "javascript:history(-1)".
Thanks
View 6 Replies
ADVERTISEMENT
Apr 28, 2008
I have a report that uses report parameters and navigation in the textbox.
When I click in the textbox, it jumps to the same report, but I cannot see the report parameters any more(hidden ). I cannot change the report parameters.
When I use only the report paramenters (no navigation option), they appear always during the run time.
How can I do to keep the report parameters visible all the time using "jump to the same report"??
Thank you so much. indyw
View 6 Replies
View Related
May 12, 2007
Hi all :
I hope this is an easy one for some of you - this is the scenario :
1) I have an Access Application that has been upsized to SQL
2) We are now replicating it with a second office
3) When we started doing the Merge Replication, the ROWGUID was added to each table
4) When we attempt to add a new record to the table, it allows us to add 3 fields, then the record 'jumps' to the indexed location of the ROWGUID
5) The 'jump' is undesirable as we then have to resort the table by key and finish its input.
5) We have our own primary identity field that SQL seems to be ignoring.
Any help would be really great
View 4 Replies
View Related
May 3, 2007
How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.
View 7 Replies
View Related
Dec 26, 2007
Hello,
Very strange phenomenon with the "Jump to report:" Hyerlink Actions when I deployed my reports to the production servers:
The Actions no longer funcioned properly when attempting to go to one report to another. Sometimes, the same report would come up and sometimes a different report. It appeared that whatever mechanism Report Server uses to construct the proper URL when using "Jump to report:" is unreliable(or the URL is not being honored by the web-server).
All this is happening under the Report Viewer control. I have had to do a painful fix of manually constructing the entire absolute URL and including the reportviewer control in the url.
Any way to get back relative Jump to report: URL's?
Thanks JS
View 1 Replies
View Related
Feb 1, 2007
Hi
I want to use Jump to Report option under Navigation tab.
I have two reports both with Same parameters and parameters are multiple value selectable.
In Jump to Report this is how I set the parameter value.
LeadershipTeamId =Join(Parameters!LeadershipTeamId.Value,", ")
CostCentreId =Join(Parameters!CostCentreId.Value,", ")
CostElementGroupId =Fields!CostElementGroupId.Value
This works fine if I have only one value selected for CostCentre and LeadershipTeam but when I select the multiple value I get the following error.
The value provided for the report parameter 'LeadershipTeamId' is not valid for its type. (rsReportParameterTypeMismatch)
Am I missing anything here?
Any help would be highly appreciated.
Best Regards
View 2 Replies
View Related
Mar 5, 2007
Hi all,
I have created a hyperlink(textbox) with an action property setting of "Jump to report" The report I am jumping to takes 5 parameters. I want to pass 4 of the parameters from the main report and have the user enter the 5th. I have mapped the 4 parameters and in preview mode, everthing works great. In preview mode, the parametrs are passed and the last parameter is left waiting for entry. After deployment, this is not the case. In the deployed state, I simply get an error that parameter #5 is blank. Is there there something I am missing?
regards,
Bill
View 2 Replies
View Related
May 11, 2007
Hi all,
Is it possible to use the "jump to report " action and have the report open in a new window?
regards,
Bill
View 3 Replies
View Related
Dec 4, 2007
Hello.
I have a report with a graph in it.
I want to jump to another url when I'm clicking on my report.
I know how to sat the action for clicking inside the report on one of the data number but I want it to jump when I'm ckicking anywhere on the report.
Is there a way to do so?
Thanks.
View 1 Replies
View Related
Sep 11, 2007
Can I have a report that is nothing more than a parameter and when the user selects from the list it will jump to another report based on which parameter was selected?
I can create a report with a text box that I can click to jump. I'd like to be able to eliminate the click on text box if possible and jump directly from parameter select pull down box.
Thanks.
View 3 Replies
View Related
Mar 14, 2008
Hi,
I have a report that uses Jump to Report and passes Reportname with parameter. Is
there a way to suppress the parameter value in the URL so the user is unable
to manipulate the parameter and execute the changed URL?
This is what I have so far..
="http://<servername>/ReportServer?/<folder>/<reportname>&<parametername>="+Fields!<fieldname>.Value.tostring
because when reports exported to excel, hyperlink path will be displayed and should not display to the user.
Or can we set Hyperline action dyamically?
Thank you.
RSUser
View 4 Replies
View Related
Dec 7, 2007
Hello,
I have a report (Report1) with a subreport (SubReport2). The subreport is a barchart. On the data values for the chart, I have a "Jump to Report" action defined. This jumps to another report(Report3) that has some parameters on it. Neither Report 1 nor SubReport2 have any parameters, only Report3.
When I jump to Report3, I would like to have it open up blank with the parameters open to be selected. I don't want to pass in any parameters as I jump to it. This works perfectly when I test it in my Preview pane in BIDS. However, when I upload the report to the ReportServer, when I click on SubReport2 to jump to Report3, I get an error saying
The 'Months' parameter is missing a value
There is no parameter pane for me to choose the parameters (or any other report viewer pane). However, if I open Report3 directly without trying to use Report1 and SubReport2 to jump to it, the parameter pane is there, everything works right.
Does anyone know how I can get the parameters pane to show up when I jump to Report3?
Thanks,
Andy
View 1 Replies
View Related
Nov 13, 2007
I am very new to SSRS & SSAS .
Here is my problem. I have a SSRS report that uses a SSAS cube for as it's datasource. I have a drop down parameter box where the user can select a year (2005,2006,2007,etc..) They click the View Report button and the report is generated. On one of the textboxes properties, on the navigation tab I have Jump to Report activated. I select the parameter from the receiving reports with the value of the dropdown box.
What I'm trying to do and can't, is to jump to that report passing the contents of the dropdown box. The receiving report is a SSRS report with a datasource being the SSAS. How do I make the receiving report open based on the parameter that was sent ??
All ideas are welcome...
Thanks ..
View 4 Replies
View Related
Feb 20, 2007
Hi all,
I have got a report with external hyperlink.
When I put this link in TextBox properties >> Navigation >> Jump URL of my gridView : http://www.micheldegremont.com it works.
However, if I put "http://www.micheldegremont.com?id=" + Fields!ID.Value it doesn't work. I haven't not link in my report.
And if I put http://www.micheldegremont.com?id=Fields!ID.Value my report create a hyperlink to http://www.micheldegremont.com?id=Fields!ID.Value and no http://www.micheldegremont.com?id=1
Thanks for you help.
View 2 Replies
View Related
May 3, 2007
How do I jump to another report based on a value in my current report?
View 5 Replies
View Related
Jan 15, 2007
Greetings,
I have two reports, Report A and Report B.
Report A has two parameters defined as "Prompted", meaning the report input area is available for the user.
Report A parameters ---> StartDate, EndDate
When Report B invokes Report A using the Jump To Report Functionality and passing Report B's StartDate and EndDate parameters, Report A seems to think the parameters are implied and not needed and fails to drop down the parameter input area.
This is not desired because the user should be able to change report A's parameters.
Anyone know a workaround?
View 1 Replies
View Related
May 18, 2007
Hi
I need to be able to click a hyperlink in one report to open a linked report, but without automatically running the linked report.
Scenario.
I have a report showing customer details and on this page there is a link to a price enquiry report. This price enquiry report has two parameters: customer code and product code.
When I click the price enquiry hyperlink in the customer details report I can only attach a value to the customer code parameter. The product code parameter is not known at this stage and would have to be provided by the user after the price enquiry report is opened (but not run). The customer code parameter should already be filled (carried in the link).
When I click the link at the moment I get the error "The 'product' parameter is missing a value".
Any advice much appreciated.
Thanks,
SQLServant
View 1 Replies
View Related
Nov 30, 2007
Hello
I have set up a report with a field in a list as a link to another report . I am passing all the parameters in correctly (4 parameters : 1 from a field value and 3 from parameter values). When I run the report and click the link, it jumps to the other report but one parameter is missing a value - the parameter I got from the field value. I really don´t know why this is happening as it was working fine until I added another parameter to the reports and suddenly it doesn´t work anymore.
Is there a limit on the number of parameters I can pass or something?
Please help!
View 5 Replies
View Related
Oct 24, 2007
Hi all,
We are developing some reports in Reporting Services 2005 (deployed in Sharepoint). We are having a bit of a problem with the drill down functionality:
When drilling, the report page "jumps", repositioning itself so that the item I drilled is at the top of the page. Not what I wanted, I want it to expand the item without repositioning it.
So, any ideas on what my problem is? I am in kind of a hurry to fix this problem (as always ...).
Regards,
Daniel
View 7 Replies
View Related
Mar 22, 2007
I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
Any suggestions?
View 1 Replies
View Related
Apr 9, 2008
I'm getting the following error message
[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.
the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")
this cell also has a navigation set to "job to a report"
When i take out the navigation the warning messages go away.
Is there an issue with using navigation link on a textbox with an aggregate in it?
ps - everything runs fine I just get a warning message.
View 3 Replies
View Related
Nov 9, 2007
Hello, I've been researching this for some time. Does anyone know if you can conditionally jump to a report? Something like this:
=iif(Fields!TEST.Value = "?????" And Fields!TEST2.Value > 0, TestDetailReport, "")
I've tried this based on the text color also but keep getting errors like this:
The expression for the textbox €˜TESTBOX€™ contains an error: [BC30451] Name 'TestDetailReport' is not declared.
Is what I'm trying to do here just not possible?
Thanks,
Dennis
View 3 Replies
View Related
Mar 2, 2007
Hi
Is it possible to set a "jump to report" option where the user can select which report to jump to from a list. E.g
If I click on the Company field it allows me to select to either jump to the company sales report OR the company purchases report
thanks
View 1 Replies
View Related
Jun 7, 2006
Is there a way to jump from one report to a specific bookmark in the second report? I have a chart that jumps quite nicely to a filtered version of the report, but instead would like to be able to jump to the entire report at the specific location (e.g., Bookmark) related to the chart data item.
I know that it's quite easy to jump to a bookmark within the same report. What I can't quite determine is how to jump from one report to a specific section in a second report.
Thanks.
View 9 Replies
View Related
Sep 28, 2007
In SSRS 2005, is there any way to programatically turn off a Jump To Report link. i.e. set Hyperlink action to none through code. Also is there any way to remove all links upon exporting to excel.
Thanks
View 7 Replies
View Related
Jan 14, 2008
Hello everyone,
I have a report that has a "Jump to report:" link in it and in the report it jumps to there is another "Jump to report:" link. When I click on this link I get the following error.
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried moving the link from the header to the body of the report with the same results.
This is only happening in the web reportviewer control as our windows app works flawlessly.
We are running SQL SERVER 2005 SP2.
Does anyone have a fix, workaround or idea how to resolve this issue?
Thanks in advance
-JW
View 13 Replies
View Related
Mar 13, 2007
I have one report (R1) which includes a list of ports ("=Fields!Port_Name.Value")
Another report (R2) supplies details for individual reports and has a parameter named PortDWIDPortName which gets port names from the same dimension as those in R1. So in the field properties of the Port field in R1, I selected Navigation > Jump To Report and entered PortDWIDPortName = Fields!Port_Name.Value (also tried changing .Value to .Key or .UniqueName) but although it jumps to report R2 it does not enter a value for the parameter (ie leaves it blank or displays <Select Value> depending on whether multivalue or not).
Does anyone know the right syntax to pass the parameter ? If not, does anyone know to view what Jump To Parameter is returning so I can figure how to doctor it!
Thanks
View 1 Replies
View Related
Apr 24, 2008
Hi all, Hope someone can help me on this. I have a dataset from a stored Procedure which I am displaying on a table, I am using the option from the navigation tab "jump to report" from one of the Textboxes in the table. But I want to use the same set of data but filtered with the selected option on the table. I already have parameters for the Stored Procedure passing them to the "jump to report". But I just cannot figure out how to pass the set data set but filtered for my next report. Is there a way to do this.Or do I have to create another version filtered of the stored procedure used for the original. Ideally, it would be great to use the same dataset but filtered. Hope my question make sense. Thanks in advance jard
View 14 Replies
View Related
Feb 26, 2007
I'm having trouble dynamically specifying the name of the report I want to drill through to.
I have the follwing expression in the Jump To Report field on the Advanced Textbox Properties Navigation tab:
=IIF( Fields!Third_Element.Value = "NONE", "Details Report.rdl", "Second Level Service Sub Report.rdl")
I get an error saying I'm missing the true part of the expression... Am I specifying the report name incorrectly? Both reports have the same parameters even though each report uses different parameters:
C:devReportsSLA Request TypeService Desk SLA Performance - First Level Service Sub Report.rdl The expression for the textbox €˜Second_Element€™ contains an error: [BC30455] Argument not specified for parameter 'TruePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Also, what does the "Omit" parameter do in the paramters set up? I tried dynamically turning parameters on/off based on the report I needed to call and it didn't react as I expected.
Does anyone have any ideas?
Thanks
Carol
View 5 Replies
View Related
Sep 10, 2007
Hi,
I tried to pass parameter from one report to another report. I can send the parameter using following option:
I used jump to url option and write the following expression:
="javascript:void(window.open('http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=%2fNextGen+Reports%2fMAUA%2fSales+Order+Detail&rs:Command=Render&SalesOrderNumber="+Fields!SalesOrderNumber.Value+"'))"
and it shows me the following in browser url
http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=/NextGen+Reports/MAUA/Sales+Order+Detail&rs:Command=Render&SalesOrderNumber=SO43667
now the problem is how to get this ordernumber in my report any option ???pls urgent...any javascript function to take this no into my another report
View 37 Replies
View Related
Apr 17, 2007
I am stuck on this and its happening no matter what I do. I have a huge project that holds tons of reports. Most are sub-reports.
I have 5 sections I will just use one for example
communictions (totals)
jump to report - summary data
Jump to report - detail data.
The when I get to the detail data I always get the error:
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried to do all sorts of things and no matter what I do I cant get it to work.
This is a web application using the ReportViewer for the web, SQL Server 2005 SP2
I have searched high and low for an answer to this and nothing works, not even the get instead of the post.
Any ideas on how I can get this to work?
Thanks
Stokh
View 3 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related