Grant Create Procedure Using SSMS
Jun 5, 2008Is it possible to use sql server managment studio to grant the create procedure to a user on their own schema?
View 2 RepliesIs it possible to use sql server managment studio to grant the create procedure to a user on their own schema?
View 2 RepliesHi,
I have currently a problem with setting up the permissions for some developers. My configuration looks like this.
DB A is the productive database.
DB B is a kind of "development" database.
Now we have a couple of users call them BOB, DAVID, ...
who are members of the db role db_reader and db_writer for the productive db a but they should be allowed to do nearly everything on db b.
Therefor I added them to the db role db_owner for db b.
For testing purposes I tried to "CREATE" a view TEST as BOB in database B but I received the error message
'Msg 262, Level 14, State 1, Procedure Test, Line 3
CREATE VIEW permission denied in database 'b'.'
I cross checked the permissions on db level and I even granted all available permissions on db level but nevertheless I receive this error message.
What's my mistake?
Of course it worked fine when I give them sysadmin rights but then they have far too much permissions.
Regards,
Stefan
Hi!
How do I grant rights to an user for creating stored procedures (using T-SQL)?
Thanks,
Fabio
Can somebody tell me without pointing to any other link how to grant Create Procedure permission to DB user.
In SQL Server 2005 SP2 I want to grant the ability to create views to a user but in order to do this it requires that the users has the ability to grant alter on a schema.
Is there any way to grant this privilage without granting alter on schema also?
I am creating a login with a user in one database. The id has to
create procedures in the dbo schema, execute them, and grant execute on them to other users.
BOL says to
GRANT ALTER ON SCHEMA::DBO TO username ;
GRANT CREATE PROCEDURE TO username ;
I did that. User can now create procedures, but cannot execute what he creates. And cannot grant execute on the sp to anybody.
I don't want to give this id a lot of priviledges.
I am new to sql server. right now i getting used to management studio.I am trying to creata a new object / a new database but i am getting an error which says permission not granted
can any help me to move ahead
thanks
There's something I can't quite figure out about user creating
The application that I'm currently working on is interacting with DB, therefore every time you use application you need to login as user which is fine. The problem is that certain users should be able to create new users and the new user may even have the same level of permissions as the one that's creating it ( like admin creating another admin acount or some like that).
Question is how can I allow users to create these user with giving them as few permissions as possible.
If there's is somewhere a code sample on the net I would appreciate the link.
Need to create a user defined role with grant permissions for below .
View Definition
Execute all Function
Grant View
Grant Synonym
dbo
View Definition
Not getting grant statements for above permissions.
I mean like below.
-----------------------------------------------------------------
CREATE ROLE [Role1]
GRANT EXECUTE ON SCHEMA ::dbo TO [Role1]
-----------------------------------------------------------------
I found out how to create clustered index using TSQL, but how can you create clustered index and manage indexes using SQL Server Management Studio?
Thanks
Goldmember
Hi,
We moved a development reporting services database to a new server last night and followed the MS 'Moving a Report Server Database to another computer' directions. We used the Reporting Services Config tool to make the changes, remoted into the 2003 windows server - which is running sql Enterprise reporting and connecting to a 2005 Enterprise cluster.
We had two small problems - although everything seems to be working fine. The First try seemed to be unsuccessful because we did have the service started after applying the database connection changes. The directions don't mention starting the service before you hit apply. The second time we got an error that said "Create Grant Rights Script - The Task Failed". We entered a sql login that was a sysAdmin during the setup.
The exception details started off with:
System.UnauthorizedAccessException: Access is denied
If the rest of this error is needed I can type it out...I was sent a screen shot of it!
Thanks for any help - we are moving production soon and I'd like to understand what went wrong.
Thanks
Sam
Hi,
I created a database,login,user and schema like belows.
-- 2. create database
CREATE DATABASE MyTempDatabase;
-- 3. create login
CREATE LOGIN MyTempLogin WITH PASSWORD = '#mytemplogin$',
DEFAULT_DATABASE = MyTempDatabase,
CHECK_EXPIRATION = OFF,
CHECK_POLICY = OFF;
--
USE MyTempDatabase;
-- 4. create user
CREATE USER MyTempLogin FROM LOGIN MyTempLogin WITH DEFAULT_SCHEMA = MyTempSchema;
-- 5. create schema
CREATE SCHEMA MyTempSchema AUTHORIZATION MyTempLogin;
The created user,MyTempLogin, must have permissions that can create tables,drop tables,select,insert,delete,update and bulk insert.
How can I grant permissions to the user?(or schema?)
I failed to grant by T-SQL query.
Additionally, what is purppose of the ROLE? Should I create or use it?
I'm confusing in security concept(login,user,schema,role).
Thanks.
I deployed a report I created to Reporting Services using Management Studio. From here I could create subscriptions, if I choose. I created a linked report in a different folder from the original report. I defined all the parameters for this linked report. I cannot create subscriptions for the linked report - the context menu items are grayed out.
Anyone know why this might be happening and what I can do to correct it?
I am trying to set up a security system for my senior developers where they automatically can execute any procedure. It is in the System Administrator server role. Is there any way I can grant this role to their database role withour giving them complete System Adminstrator rights?
View 3 Replies View Related
GRANT SELECT ON [dbo].[TblAreaCatmap] TO [admin] prevent grant from being automaticly add to each column?
Is there a way when you issue a grant select to a table or a view to not also grant select for each column.
The problem is when you use the grant command it automaticly adds the grant command to each column. I want to grant the permission at the table level so when the table is scripted it only has a single grant command instead of a grant for the table and a grant for each column which is not needed.
The sql managemnt studion interface will allow you to do this but onlt by using the interface. If you issue the above command from a query window it also creates A GRANT FOR EVERY COLUMN. How can I stop this behavior.
I am writing a stored procedure which updates a table, but when I run the stored procedure using a login that I have granted execute privileges on, then I get a message that I cannot run an update on the table. This would happen in dynamic sql... while my SQL has parameter references, I don't think it is considered dynamic SQL?
sproc:
CREATE PROCEDURE [schemaname].[SetUserCulture]
@UserID int
, @Culture nvarchar(10)
AS
UPDATE dbo.SecUser
SET Culture = @Culture
WHERE UserID = @UserID
execute SQL:
EXEC schemaname.SetUserCulture @UserID = 9, @Culture = N'x'
error:
The UPDATE permission was denied on the object 'SecUser', database 'DatabaseName', schema 'schemaname'.
Have a certificate and symmetric key that i have used the following to GRANT to logins. How can I find out which SQL logins have the GRANT CONTROL and GRANT VIEW DEFINTION?
GRANT VIEW DEFINITION ON SYMMETRIC KEY:: Symetric1 TO Brenda
GRANT CONTROL ON CERTIFICATE:: Certificate1 to Brenda
I am trying to come up with a stored procedure to grant all usersdb_owner role (rather than have to manually check the users eachtime)Thanks in advance for your helpTY
View 1 Replies View RelatedHi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
Hi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
I have simple query which creates tables by passing database name as parameter from a parameter table .
SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .
Note** I am not passing any database of name '20'
Exception handler error :
ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------
Error in SSIS
[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .
Hi guys.
I am trying to create a procedure which should drop all existing triggers and can create about 40 differnt triggers in a table.
I cant use "GO" statement in a procedure.
Is there any way to create a procedure like that?
I dont want to run this as a script.
please advice.
--Note: Many triggers use same kind of variable names inside.
-MAK
Keep in mind this is my first compiled SQL program Stored Procedure(SP), copied from a book by Frasier Visual C++.NET in Visual Studio2005 (Chap12). So far, so theory, except for one bug (feature?)below. At some point I'm sure I'll be able to laugh about this, akinto forgeting a semi-colon in C/C++, but right now it's frustrating(time to sleep on it for a while).Problem--For some reason I get the error when trying to save files where twotables (called Author and Content), linked by a single key, form arelationship.By simple comparison of the source code in the textbook and my program(below) I found the difference: instead of, like in the textbook, theStored Procedure (SP) starting with "CREATE PROCEDURE", it*automatically* is (was somehow) given the name of 'ALTER PROCEDURE'and I cannot change this to "CREATE PROCEDURE" (you get an error in MSVisual Studio 2005 Pro edition of "There is already an object namedXXX in the database", see *|* below). No matter what I do, the SP isalways changed by Visual Studio 2005 to 'ALTER PROCEDURE'!!!(otherwise it simply will not save)Anybody else have this happen? (See below, others have had this happenover the years but it's not clear what the workaround is)Keep in mind this is my first attempt and I have ordered somespecialized books on SQL, but if this is a common problem (and Isuspect it's some sort of bug or quirk in VS2005), please let me know.Frankly I think SQL as done by VS2005 is messed up.Here are two Usenet threads on this problem:(1) http://tinyurl.com/2o956m or,http://groups.google.com/group/micr...1454182ae77d409(2) http://tinyurl.com/2ovybv or,http://groups.google.com/group/micr...9e5428bf0525889The second thread implies this is a bug--any fix?Also this bug might be relate to the fact I've switched (and notrebooted) from Administrator to PowerUser after successfully changingthe permissions in the SQL Server Management Studio Express (see thisthread: http://tinyurl.com/2o5yqa )Regarding this problem I might try again tommorrow to see if rebootinghelps.BTW, in the event I can't get this to work, what other SQL editor/compiler should I use besides MS Visual Studio 2005 for ADO.NET andSQL dB development?RL// source files// error message:'Authors' table saved successfully'Content' table- Unable to create relationship 'FK_Content_Authors'.The ALTER TABLE statement conflicted with the FOREIGN KEY constraint"FK_Content_Authors". The conflict occurred in database "DCV_DB",table "dbo.Authors", column 'AuthorID'.// due to the below no doubt!--CREATE PROCEDURE dbo.InsertAuthor /* THIS IS CORRECT (what I want)'CREATE PROCEDURE' not 'ALTER PROCEDURE'*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--ALTER PROCEDURE dbo.InsertAuthor /* WRONG! I want 'CREATE PROCEDURE'not 'ALTER PROCEDURE' but VS2005 won't save it as such!!!*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--*|* Error message given: when trying to save CREATE PROCEDURE StoredProcedure: "There is already an object named 'InsertAuthor' in the dB
View 11 Replies View RelatedCREATE PROC selectpro
@id INT=1
WITH RECOMPILE
AS
SELECT * FROM [contain-1]
WHERE ID=@id
RECOMPILE indicates that SQL SERVER does not cache a plan for this procedure and the procedure is recompiled as run time.
What is purpose statement above?
why use RECOMPILE?
Hi,
I would like to have a default header everytime anyone create a stored proc on the server.
when someone clicks on create new procedure, it should come up like this:
CREATE PROCEDURE [OWNER].[PROCEDURE NAME] AS
/***********************************
Created By:
Date Created:
Purpose:
History:
************************************/
I saved a templet in Model database with this header. Somehow still when we try to create new procedure, it doesn't show the header.
Does anything else need to be done besides saving the templet?
If changing the way in the MOdel database is not the correct way to do it, How else can I accomplish this so that developers are forced to fill in the information?
Thanks
:confused:
I am trying to create a procedure but I am not sure how to script this correctly.
CREATE PROCEDURE spPriceChange
@newprice DECIMAL(5,2),
@margin DECIMAL(5,4),
@mincalc DECIMAL(5,2),
@maxcalc DECIMAL(5,2)
AS
UPDATE item set item_prc_3 = @newprice
where item_lst_lnd_cost/@margin BETWEEN @mincalc AND @maxcalc
and item_id in (select item_id from item where item_prc_1 like '%9.99')
and item_cat in ('AB', 'AC', 'AD', 'AH', 'AM', 'AS', 'AT', 'DB', 'DC', 'DD', 'DH', 'MB', 'MC', 'MD', 'MH', 'MM', 'MU', 'SM', 'UA', 'UC', 'UM', 'UO', 'UU', 'VM', 'VU')
and item_id not like '*%'
and item_id not like 'A%'
and item_id not like 'C%'
and item_id not like 'L%'
and item_id not like 'Q%'
and item_id not like 'R%'
and item_id not like 'Z%'
The query throws an error that only shows the @ symbol as the stop point. What did I do wrong?
Brooks C. Davis
IT AdministratorLogistics Manager SFTF LLC dba Ashley Furniture Homestores
DELL POWEREDGE 2850 Dual Core Xeon x3 = 1xDB 1xSQL 1xTS | DELL POWEREDGE 2950 Quad Core Xeon = 1xTS | SERVER 2003 | MS SQL 2005 | PERVASIVE EMBEDDED V.9
Hi All.
I just start use SQL2005. I have code
CREATE DATABASE DMR_V3_0 ON
(FILENAME = 'X:ABCMYFILE_Data.mdf')
FOR ATTACH;
How to create procedure if value of FILENAME will specify before procedure will run.
Thanks.
Hi
I try to create a very simple stored procedure,
CREATE PROCEDURE Importera_fil
@fil varchar
AS
INSERT INTO XMLFaktura(Faktura)
SELECT * FROM OPENROWSET
(Bulk '@fil', SINGLE_CLOB) AS DocumentID
but I get an errormessage when I try to create it,
Msg 4860, Level 16, State 1, Procedure Importera_fil, Line 4
Cannot bulk load. The file "@fil" does not exist.
So my question is, how can i create the procedure?
Thanks for any help
create proc sp_fillrowintable( @tablename nvarchar(50), @colvalue nvarchar(100), @id int )asdeclare @colname nvarchar(30)declare @colid nvarchar(30)--declare @tablename nvarchar(50)--set @tablename = @tableselect @colid = column_name from information_schema.columns where table_name = @tablename and data_type ='int'select @colname = column_name from information_schema.columns where table_name = @tablename and data_type ='varchar' if(@id = 0)begin select @id = max(@colid) from @tablename Insert into @tablename values (@id,@colvalue)endelsebegin update @tablename set @colname = @colvalue where @colid = @id end getting errors at my side while executing this script Msg 1087, Level 15, State 2, Procedure sp_fillrowintable, Line 21Must declare the table variable "@tablename".Msg 1087, Level 15, State 2, Procedure sp_fillrowintable, Line 22Must declare the table variable "@tablename".Msg 1087, Level 15, State 2, Procedure sp_fillrowintable, Line 26Must declare the table variable "@tablename".Msg 156, Level 15, State 1, Procedure sp_fillrowintable, Line 26Incorrect syntax near the keyword 'where'. help me out I want to insert and update rows for various table having only 2 columns in each table.want to insert and update rows in these tables. please tell me is it possible to do this through stored procedure or i have to do inline query in .net
View 5 Replies View Relatedforumid questid answerid answer replyby replyon 1 1 1 xxxx aaa 01/01/08(mm/dd/yy) 1 1 2 yyyy bbb 01/02/08 2 1 1 zzzz ccc 01/02/08 1 1 3 hhhh bbb 01/04/08 2 1 2 uuuu vvv 01/04/08 1 2 1 tttt ooo 01/05/08suppose i give forumid value=1 i want following answer recent reply and no.of replies forumid questid answerid no.of.reply answer replyby replyon 1 1 3 3 hhhh bbb 01/04/08 1 2 1 1 ttt ooo 01/05/08
View 14 Replies View RelatedHi all,
I am not familiar with the Store Procedure, so just want to know how to create the store procedure? For example, i want to write a store procedure for Login validation to check whether the username and password is correct. So what should i do???
has anyone ever used the Create Procedure wizard in SQL server 2000?? is that effective
View 3 Replies View RelatedI have to run a Big Sproc for make a lot of updates and insert. because trigger it take to many time.
I can drop the trigger before the procedure and recreate it after, but I wondered whether there existed of other solution?
Can I deactive the trigger? I'm affraid too got two copie of code for the trigger that why I dont really like the Drop-Create solution...
Thanks