Grant Select On All Tables To Public
Jan 17, 2001This is a newbie question but, does anyone know how to grant select on all tables within a given database to public with a SQL statement.
View 1 Replies
ADVERTISEMENT
Grant Rights To Public
Apr 26, 2001Can I grant rights to "public" role ( customize it). Our app uses it.
thanks,
T-SQL - How To Grant Public Access To A DB For A User
Nov 2, 2007I need an example of how to grant access to a SQL user to a DB. For the life of me I can't seem to get my syntax correct. My database name is TEST and my username is LEMME_IN and I want to grant the user "Public" access to the db with db_datareader, db_datawriter database role membership.
Thanks
Grant Select Permission On All Tables
Jul 3, 2004Hi Gurus, Can any one tell me how to grant select permisision all tables in a DB
like Grant all on [all tables] to myuser.
Thanks in advance.
Srinivas varanasi
SQL Security :: How To Grant Two Tables (select Only) Access To New User
May 5, 2015i want to create new sql user and grant him two tables access. we have several databases created on same server so we want to allow only two table in ABC database. user should not be able to see other databases and their tables. And user also should not be able to access any other tables in ABC database except two tables.
is there any query to deny all tables in schema for all clauses (Select, Update, Insert) then grant two tables to user with select clause?
GRANT SELECT ON [dbo].[TblAreaCatmap] TO [admin] Prevent Grant From Being Automaticly Add To Each Column
Oct 15, 2007
GRANT SELECT ON [dbo].[TblAreaCatmap] TO [admin] prevent grant from being automaticly add to each column?
Is there a way when you issue a grant select to a table or a view to not also grant select for each column.
The problem is when you use the grant command it automaticly adds the grant command to each column. I want to grant the permission at the table level so when the table is scripted it only has a single grant command instead of a grant for the table and a grant for each column which is not needed.
The sql managemnt studion interface will allow you to do this but onlt by using the interface. If you issue the above command from a query window it also creates A GRANT FOR EVERY COLUMN. How can I stop this behavior.
Select Parameter Declaritively Set To A Public Property Value?
Oct 23, 2007Hi,I was wondering about the possiblity of setting a SelectParameter for my SQLDataSource declaritively, using a public property value.Something like this: <SelectParameters> <asp:Parameter Name="CategoryIdLvl3" DefaultValue='<% SelectedCatLvl3%>' Type="String" /> </SelectParameters> So the default value automically processes Public Property value of SelectdCatLvl3, which is declared in my code behind. Of course this syntax is incorrect, but if someone can help, much appreciated.I don't want to set this parameter in code behind, because I'd have to do it mulitple times, so was hoping this method would somehow work. thanks..
View 3 Replies View RelatedReseting Select Permissions For Public Role
Sep 13, 2004Every night, there are some stored procedures that run to recreate tables so that the information in the table is updated. After the tables are droped and recreated I have to go in and check the select box under the permissions for the public role. If i don't do this users will not be able to select from theres tables.
What can I do so that users are able to select from these tables after they are created?
Would you be able to specify the select permissions for the public role in the script that creates the table or run a script that gives all those tables select permissions for the public role?
All help is appreciated.
Revoking Permissions On System Tables To The Public Role.
Oct 14, 2004We have an audit issue that is requiring me to revoke the select permissions from the public role to the system tables. Has anyone had to do this?? What problems did you experience? Are their any tables that you were not able to change the permissions on? Any help is greatly appreciated.
View 5 Replies View RelatedGrant On All Tables
May 11, 2006Hi,
is there a way to grants object privileges on
all tables of database to an user?
like this:
grant select, insert, update, delete on <all tables> to usernamedb
go
thanks!!!!
Grant - All Tables In Database
Aug 12, 1999Hello:
Is there any way to grant all permissions on all of the tables in a database without doing a GRANT ALL command for each table?
Thanks in advance.
Bulk Grant Select Failing
May 28, 2004Hi thereI'm still finding my way in SQL server so the problem might be very simple (hopefully...).Would anybody have any idea why: grant select on table1 to ReadGroup works fine, and grant create table to ReadGroup works fine, yet grant select to ReadGroup results in Server: Msg 156, Level 15, State 1, Line 1Incorrect syntax near the keyword 'to'.? Any help would be immeasurably appreciatedCheers!
View 3 Replies View RelatedSQL Security :: How To Grant Select On All Views OR All Columns
Dec 14, 2011grant SELECT on all_columns to yogi_bear;
grant SELECT on all_objects to yogi_bear;
grant SELECT on all_views to yogi_bear;
but it doesn't work, why? I know how to do it with a cursor or dynamic sql, but why won't these sql statements work?
Grant Execute On Sproc Doesn't Grant Privilege To Update?
Oct 31, 2014I am writing a stored procedure which updates a table, but when I run the stored procedure using a login that I have granted execute privileges on, then I get a message that I cannot run an update on the table. This would happen in dynamic sql... while my SQL has parameter references, I don't think it is considered dynamic SQL?
sproc:
CREATE PROCEDURE [schemaname].[SetUserCulture]
@UserID int
, @Culture nvarchar(10)
AS
UPDATE dbo.SecUser
SET Culture = @Culture
WHERE UserID = @UserID
execute SQL:
EXEC schemaname.SetUserCulture @UserID = 9, @Culture = N'x'
error:
The UPDATE permission was denied on the object 'SecUser', database 'DatabaseName', schema 'schemaname'.
How To Grant Create View Access Without Grant Alter On Schema::
Aug 16, 2007In SQL Server 2005 SP2 I want to grant the ability to create views to a user but in order to do this it requires that the users has the ability to grant alter on a schema.
Is there any way to grant this privilage without granting alter on schema also?
Finding Logins That Have GRANT CONTROL And GRANT VIEW DEFINITION
Jul 21, 2015Have a certificate and symmetric key that i have used the following to GRANT to logins. How can I find out which SQL logins have the GRANT CONTROL and GRANT VIEW DEFINTION?
GRANT VIEW DEFINITION ON SYMMETRIC KEY:: Symetric1 TO Brenda
GRANT CONTROL ON CERTIFICATE:: Certificate1 to Brenda
Grant User Group Select Access To All Views In Database
Sep 24, 2013I'm trying to grant a user group select access to all the views in a database. I already made a query which creates a result set whit the SQL Syntax I (displayed below) need but it seems to be impossible to get this result set executed after creation.
use [AdventureWorksDW2008R2]
SELECT
'GRANT SELECT ON [' + SCHEMA_NAME(Schema_id) + '].[' + name + '] TO [DOMAINGROUP]'
FROM sys.views;
What Permission I Need To Grant To A User If He Need To Read Or Write A Link Server Tables
May 31, 2007hello,
What role or system privilege do I need to grant to a user if he need to read the data from a table which is in a link server object? where I can find the document about these commands.
Thanks
Argument Not Specified For Parameter 'arguments' Of Public Function Select(arguments As System.Web.DatasourceSelect Arguments As Collections Ienumerable
Mar 25, 2007I have an SqlDataSource control on my aspx page, this is connected to database by a built in procedure that returns a string dependent upon and ID passed in.
I have the followinbg codewhich is not complet, I woiuld appriciate any help to produce the correct code for the code file
Function GetCategoryName(ByVal ID As Integer) As String sdsCategoriesByID.SelectParameters("ID").Direction = Data.ParameterDirection.Input sdsCategoriesByID.SelectParameters.Item("ID").DefaultValue = 3 sdsCategoriesByID.Select() <<<< THIS LINE COMES UP WITH ERROR 1End Function
ERROR AS FOLLOWS
argument not specified for parameter 'arguments' of public function Select(arguments as System.Web.DatasourceSelect Arguments as Collections ienumerable
Help I have not got much more hair to loose
Thanks Steve
SQL 2012 :: How To Grant A New User Same Direct Privilege To Tables As Existing User
Feb 18, 2014I am relatively new to sql developer. There is a new user that just joined our organization. I am trying to grant him the same direct grants privilege to the tables that an existing user has. The existing user has a ton of direct table access privileges and it will take days if I had to do each grant one by one like: grant select,insert,delete,update on 'table name' to 'user id'. Is there a way of copying or inserting an existing user's privilege and granting it to a new user.
View 2 Replies View RelatedMultiple Tables Select Performance - SQL 2005 - Should It Take 90 Seconds For A Select?
Dec 4, 2007I have a problem where my users complain that a select statement takes too long, at 90 seconds, to read 120 records out of a database.
The select statement reads from 9 tables three of which contain 1000000 records, the others contain between 100 and 250000 records.
I have checked that each column in the joins are indexed - they are (but some of them are clustered indexes, not unclustered).
I have run the SQL Profiler trace from the run of the query through the "Database Engine Tuning Advisor". That just suggested two statistics items which I added (no benefit) and two indexes for tables that are not involved at all in the query (I didn't add these).
I also ran the query through the Query window in SSMS with "Include Actual Execution Plan" enabled. This showed that all the execution time was being taken up by searches of the clustered indexes.
I have tried running the select with just three tables involved, and it completes fast. I added a fourth and it took 7 seconds. However there was no WHERE clause for the fourth table, so I got a cartesian product which might have explained the problem.
So my question is: Is it normal for such a type of read query to take 90 seconds to complete?
Is there anything I could do to speed it up.
Any other thoughts?
Thanks
Declaring A Table Variable Within A Select Table Joined To Other Select Tables In Query
Oct 15, 2007Hello,
I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.
I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.
This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.
So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?
Thanks in advance,
Andy
Select * from
(
declare @years table (years int);
insert into @years
select
CASE
WHEN month(getdate()) in (1) THEN year(getdate())-1
WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())
END
select
u.fullname
, sum(tx.Dm_Time) LastMonthBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-1
and
year(dm_date) = (select years from @years)
and tx.dm_billable = 1
group by u.fullname
) as A
left outer join
(select
u.FullName
, sum(tx.Dm_Time) Billhours
, ((sum(tx.Dm_Time))
/
((day(getdate()) * ((5.0)/(7.0))) * 8)) perc
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
tx.Dm_Billable = '1'
and
month(tx.Dm_Date) = month(GetDate())
and
year(tx.Dm_Date) = year(GetDate())
group by u.fullname) as B
on
A.Fullname = B.Fullname
Left Outer Join
(
select
u.fullname
, sum(tx.Dm_Time) TwomosagoBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-2
group by u.fullname
) as C
on
A.Fullname = C.Fullname
Public Role
May 13, 2002I am new at this and we encountered a problem. Can names in the public role be deleted? We have some names that need to go - however the delete option does not high light?
I would appreciate your help..
How To Deny DMV To Public?
May 14, 2008Hi Guys,
I am unable to deny DMV rights to public. I have already ran the SQL query successfully:
"DENY VIEW SERVER STATE TO public" and "DENY VIEW DATABASE STATE TO public"
However when I check my master DB, the public still have rights to all the dm_***** objects. Am I doing it wrong or is there any steps I missed out? Can anyone help please?
Thanks a million.
Public Report
May 7, 2008
Is there a way to make a report public, to outside your domain users? We have a web application the users are authenticated in that is not in .NET and not using NT authentication and we want to have a report linked from inside the application that will pass the parameters in the URL. This is not very sensitive data and the report is using SQL authentication. We also don't want then to log in a second time for the report.
Can this be done easily?
Thanks
Linda
Use Of Public Variables
Feb 23, 2007Hi,
I'm actually using global public variables in the custom code of my reports.
Is there a "chance" that , if the report is executed at the same time by two users, values calculated for an user will be crushed by other user's execution ?
Thanks in advance.
Grégory.
SQL Express On A Public Web Host
Mar 28, 2007Are there any restrictions, limitations or anything to prevent the use of SQL Express database being used with my ASP.NET 2.0 application on a public web host?
If so, what are they?
Thanks.
Error While Connecting To DB Through Public IP
Mar 16, 2004While connecting to the DB through a public IP from my system i'm getting an SQL Server does not exist or access denied.But while using localhost its working fine.DB setting in the web.config file.The Code is
<!-- application specific settings -->
<appSettings>
<!-- <add key="connString" value="data source=10.1.1.228;initial catalog=ACE;password=XXXX;persist security info=True;user id=sa;packet size=4096" />-->
<add key="connString" value="packet size=4096;user id=sa;data source=EBIZ;persist security info=True;initial catalog=ACE;password=password" />
</appSettings>
What to do for this error.
Using SQL For Navigating A Public Web Site
Apr 4, 2000Is anyone using SQL server to navigate their public web site?
We are concerned about having a database hit every time the user chooses a different page from our navigation bar.
Any advice? Experience with this?
Public Database Permissions
May 2, 2007I have a db that I use as the backend to an Access application. The application looks at 2 databases that are on the clinet machine. A db from a vendor and my new database. I can read the vendor db (with the proper dns), but I can only read my db when the user has admin privileges. I have granted the public all permissions for the table on my db. What am I missing?
Also, this is a db on a Small business Server 2003 so all of the SQL tools do not appear to be there.
TIA
Create Public Synonym
Jul 15, 2006I get an error in query analyzer when running (parsing query):
CREATE PUBLIC SYNONYM LIB_GROUP_PERMITS FOR LIB_GROUP_PERMITS;
with an error of:
"Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'PUBLIC'."
Can anyone help me at all please!
Thanks!
How Do I Open Up Sql Server To The Public On Web
Feb 14, 2008set up windows 2003 server
sql server 2000
have public IP from netword soluctions
I can see website
what settings to i need to open up sql server to the public?
MS CRM Reports Not Working With Public IP
Mar 1, 2008Hi,
I have installed a MS CRM 3.0 Server with SQL 2005 Reporting Server on the same server.
Whenever I access reports from MS CRM with internal IP i.e http://192.168.100.55:5555 within my network every default as well custom reports are working fine.
But the same when I access with Public IP i.e. http://209.199.X.X:5555 I am able to see the application in public i.p but the reports are not working.
Is there any way so that I can access my all reports from MS CRM in public IP.
Thanks
Kshitij