Hello everyone,
I have a view, NAS_vPosition that has a coloumn vLogin_Acting and I want to use the user.identity.name to select the row from this table that matches.
So far i have tried:
SelectCommand = "Select * FROM NAS_vPosition WHERE vLogin_Acting = ' <%=User.Identity.Name %> ' "
with no success.
Any help is appreciated
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 – the gridview should show those 4 columns. The second time the user selects columns 2,5,7 – the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad
i have a case : i'm using a select statement with SqlCommand and save the results in the SQLDataAdapterand using the data table I post the result to the gridview and show it there....my question is what should I do to append string to the SQL Command??
View 2 Replies View RelatedI have a GridView dispalying from a SQLServerDataSource that is using a SQL Select Union statement (like the following):
SELECT FirstName, LastNameFROM MasterUNION ALLSELECT FirstName, LastNameFROM CustomORDER BY LastName, FirstName
I am wondering how to create Update and Insert statements for this SQLServerDataSource since the select is actually driving from two different tables (Master and Custom). Any ideas if or how this can be done? Specifically, I want the Custom table to be editable, but not the Master table. Any examples or ideas would be very much appreciated!
Thanks,
Randy
Hi Everyone,
I have the following stored procedure, I would like to use
IF statement or something of the sort in the where clause i.e.
The last line in the SP is: AND (category.categoryID = @categoryID),
I only want to check this, if @categoryID is not = 12.
So can I do something like this:
IF @categoryID <> 12
AND (category.categoryID = @categoryID)
STORED PROCEDURE:
CREATE PROCEDURE sp_get_total_risk_patients
@categoryID int
AS
SELECT COUNT(DISTINCT patient.patientID) AS total_patients
FROM patient
INNER JOIN patient_record ON patient.patientID = patient_record.patientID
INNER JOIN sub_category ON sub_category.sub_categoryID = patient.sub_categoryID
INNER JOIN category ON category.categoryID = sub_category.categoryID
WHERE risk = 6
AND (completed_date = '' OR completed_date IS NULL)
AND (category.categoryID = @categoryID)
I'm having this query:SELECTss.subscription_id AS SubscriptionId,s.id AS ScopeId,s.[name] AS ScopeName,s.base AS ScopeBase,dbo.iqGetShapesByScopeAsString(s.id) AS ShapesAsStringFROMsubscription_scope ss,scope sWHEREss.subscription_id = @subscription_idANDss.scope_id = s.idORDER BYs.[name]The select only returns a single row but my database (SQL Server 2005CTP) seems to execute the "iqGetShapesByScopeAsString" function foreach row in the subscription_scope and scope tables. This is a bug,right? The function should be executed only once for each *returned*row in the SELECT, right? I believe that was the case in SQL 2k thoughI can't check it at the moment.// pt
View 6 Replies View RelatedI have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts.
What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*).
This is the code in my procedure..
DECLARE @tab_list CURSOR
set @tab_list = CURSOR FOR select * from table_list
OPEN @tab_list
DECLARE @tab_name varchar(256)
DECLARE @rec_cnt int
FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt
select count(*) from @tab_name
This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table.
Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there.
Please help me to construct the select statement that is similiar to
x=<table name>
select * from x
where x is a variable and the table name gets substituted.
what is the syntax for it ?
Hello,
Is it possible to generate a identityfield dynamically upon select, like this:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username ASC
I want the output to be:
1 - Name12 - Name23 - Name3
The reason for this, is that i want to change the sort order in many diffrent ways, but i need to get the IDs from 1-?? even when the sort order changes.
Like:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username DESC
I want the output to be:
1 - Name32 - Name23 - Name1
Patrick
The following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:
"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"
Compact 3.5 doesnt like the SELECT statement claiming that:
There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]
Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?
I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.
I have a gridview that is based on the selection(s) in a listbox. The gridview renders fine if I only select one value from the listbox. I recive this error though when I select more that one value from the listbox:
Syntax error converting the nvarchar value '4,1' to a column of data type int. If, however, I hard code 4,1 in place of @ListSelection (see below selectCommand WHERE and IN Clauses) the gridview renders perfectly.
<asp:SqlDataSource ID="SqlDataSourceAll" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT DISTINCT dbo.Contacts.Title, dbo.Contacts.FirstName, dbo.Contacts.MI, dbo.Contacts.LastName, dbo.Contacts.Suffix, dbo.Contacts.Dear, dbo.Contacts.Honorific, dbo.Contacts.Address, dbo.Contacts.Address2, dbo.Contacts.City, dbo.Contacts.StateOrProvince, dbo.Contacts.PostalCode FROM dbo.Contacts INNER JOIN dbo.tblListSelection ON dbo.Contacts.ContactID = dbo.tblListSelection.contactID INNER JOIN dbo.ListDescriptions ON dbo.tblListSelection.selListID = dbo.ListDescriptions.ID WHERE (dbo.tblListSelection.selListID IN (@ListSelection)) AND (dbo.Contacts.StateOrProvince LIKE '%') ORDER BY dbo.Contacts.LastName">
<SelectParameters>
<asp:Parameter Name="ListSelection" DefaultValue="1"/>
</SelectParameters>
</asp:SqlDataSource>
The selListID column is type integer in the database.
I'm using the ListBox1_selectedIndexChanged in the code behind like this where I've tried using setting my selectparameter using the label1.text value and the Requst.From(ListBox1.UniqueID) value with the same result:
Protected Sub ListBox1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
Dim Item As ListItem
For Each Item In ListBox1.Items
If Item.Selected Then
If Label1.Text <> "" Then
Label1.Text = Label1.Text + Item.Value + ","
Else
Label1.Text = Item.Value + ","
End If
End If
Next
Label1.Text = Label1.Text.TrimEnd(",")
SqlDataSourceAll.SelectParameters("ListSelection").DefaultValue = Request.Form(ListBox1.UniqueID)
End Sub
What am I doing wrong here? Thanks!
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID
FROM tblGRNItem
INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp
WHERE tblGRNItem.DateCreated BETWEEN
(SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
[code]....
I am fairly new with SQL and still learning. I have used a case statemtent for a column in my select list and want to use the results of that statement's field in my WHERE clause but it is not working for me. Here is the code I have so far:
SELECT
l.loanid,
p.investorid,
l.duedate,
case when pc.duedate >= l.duedate then pc.duedate end as RateDueDate,
pc.interestrate
FROM loan l
inner join participation p on p.loanid = l.loanid
inner join paymentchange pc on pc.loanid = l.loanid
where p.investorid = '12345' and RateDueDate is not null
order by l.loanid, pc.duedate
I want to put the results of this case statment in my where clause like highlighted above but it is not working because RateDueDate is not an actual column in the table. Any help would be greatly appreciated.
Thanks!
Hi
I am ramesh here from go-events.com
I am using sql mail to send out emails to my mailing list
I have difficulty combining a select statement with a where clause stored in a variable inside a cursor
The users select the mail content and frequency of delivery and i deliver the mail
I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them.
Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code
that does not work
For example
DECLARE overdue3 CURSOR
LOCAL FORWARD_ONLY
FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2
OPEN overdue3
I get an error message at the '+' sign
which says, cannot use empty object or column names, use a single
space if necessary
How do I combine the select statement with the where clause?
Help me...I need help urgently
I have a two tables each having a uniqueidentifier column person_id
I am trying to a select statement where I want a list of the person_id's in one table that are not in another table.
-- insert into wch_needed those who need checked
insert into #wch_needed (person_id, rendered_by )
select distinct e.person_id, e.rendered_by
from #wch_who o, encounter e
where o.person_id not in (select distinct person_id from #wch_have )
and o.person_id = e.person_id
the where conditional
where o.person_id not in (select distinct person_id from #wch_have )
does not work.
How can I do this?
The stored procedure, below, results in this error when I try to compile...
Msg 156, Level 15, State 1, Procedure InsertImportedReportData, Line 69
Incorrect syntax near the keyword 'ORDER'.
However the select statement itself runs perfectly well as a query, no errors.
The T-SQL manual says you can't use the keywords COMPUTE, COMPUTE BY, FOR BROWSE, and INTO in a cursor select statement, but nothing about plain old ORDER BYs.
What gives with this?
Thanks in advance
R.
The code:
Code Snippet
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF object_id('InsertImportedReportData ') IS NOT NULL
DROP PROCEDURE InsertImportedReportData
GO
-- =============================================
-- Author: -----
-- Create date:
-- Description: inserts imported records, marking as duplicates if possible
-- =============================================
CREATE PROCEDURE InsertImportedReportData
-- Add the parameters for the stored procedure here
@importedReportID int,
@authCode varchar(12)
AS
BEGIN
DECLARE @errmsg VARCHAR(80);
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
--IF (@authCode <> 'TX-TEC')
--BEGIN
-- SET @errmsg = 'Unsupported reporting format:' + @authCode
-- RAISERROR(@errmsg, 11, 1);
--END
DECLARE srcRecsCursor CURSOR LOCAL
FOR (SELECT
ImportedRecordID
,ImportedReportID
,AuthorityCode
,[ID]
,[Field1] AS RecordType
,[Field2] AS FormType
,[Field3] AS ItemID
,[Field4] AS EntityCode
,[Field5] AS LastName
,[Field6] AS FirstMiddleNames
,[Field7] AS Title
,[Field8] AS Suffix
,[Field9] AS AddressLine1
,[Field10] AS AddressLine2
,[Field11] AS City
,[Field12] AS [State]
,[Field13] AS ZipFull
,[Field14] AS OutOfStatePAC
,[Field15] AS FecID
,[Field16] AS Date
,[Field17] AS Amount
,[Field18] AS [Description]
,[Field19] AS Employer
,[Field20] AS Occupation
,[Field21] AS AttorneyJob
,[Field22] AS SpouseEmployer
,[Field23] As ChildParentEmployer1
,[Field24] AS ChildParentEmployer2
,[Field25] AS InKindTravel
,[Field26] AS TravellerLastName
,[Field27] AS TravellerFirstMiddleNames
,[Field28] AS TravellerTitle
,[Field29] AS TravellerSuffix
,[Field30] AS TravelMode
,[Field31] As DptCity
,[Field32] AS DptDate
,[Field33] AS ArvCity
,[Field34] AS ArvDate
,[Field35] AS TravelPurpose
,[Field36] AS TravelRecordBackReference
FROM ImportedNativeRecords
WHERE ImportedReportID IS NOT NULL
AND ReportType IN ('RCPT','PLDG')
ORDER BY ImportedRecordID -- this should work but gives syntax error!
);
END
Greetings,
I have a C# application that calls a stored procedure to query the database (MSSQL 2005). I only have one field/column returned from the query but I need that column ordered.
How do I use the ORDER BY clause without returning the index column which does the sorting? The first example is NOT what I want. I want something that works like the second example which only returns the 'Name' column.
ALTER PROCEDURE [dbo].[MyProcedure]
AS
BEGIN
SELECT DISTINCT A.Name, A.index
FROM
...
...
ORDER BY A.[Index], A.Name ASC
END
ALTER PROCEDURE [dbo].[MyProcedure]
AS
BEGIN
SELECT DISTINCT A.Name
FROM
...
...
ORDER BY A.[Index]
END
Thanks
I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.
Store Type Sales
11 A 1000
23 A 1980
23 B 50
5 B 560
I want to filter the store in "where clause" where
1)- if the store has type A and B, then assign only A
2)- if the store has type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.
Select Store, sum(sales), Type
from table1
where (TYPE]= (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]
The above statement is not working for when store has only Type B associated with it.
I am having issues getting this to work. I have the user login to a page to
put in a request for vacation. When they login, I have a label that isn't
visible that is equal to their User.Identity.Name.
I select the user from the employee table where the username = the label User
Identity Name and pull in the emp_id which is the primary key that identifies
the user.
I need to insert the request into the request table with the emp_id from the
select statement, without showing the em_id on the screen. I tried using a
hidden field and assigning the emp_id as the value, but it isn't working.
Not sure if this is the best way to do this. Really new to ASP.NET 2.0 so I
really appreciate any help.
Thank you!
I have a user table for an organization that can best be described as a pyaramid. We are using the terms parent and child to define the relationship between users. Each user is a child under a specific parent; accept for the top person who is not a child under anyone. Each user can be a parent over many children.
User A has a parent - User B
User B has a parent - User C
User C has a parent - User D
User D has not parent
I want to do is create a select statement that would return all the parents for a particular user. For instance, if I ran the select statement for User A, it would return:
User A
User B
User C
User D
If I ran it for User C, it would return:
User C
User D
Ideas anyone on how I can accomplish this.
Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears. Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname. I have been advised to use CASE statements, yet I do not know how to use them. Below have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then Dim tkt As FormsAuthenticationTicket Dim cookiestr As String Dim ck As HttpCookie tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _ DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data") cookiestr = FormsAuthentication.Encrypt(tkt) ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr) If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration ck.Path = FormsAuthentication.FormsCookiePath() Response.Cookies.Add(ck) Dim strRedirect As String strRedirect = Request("ReturnURL") If strRedirect <> "" Then Response.Redirect(strRedirect, True) Else strRedirect = "webform1.aspx" Response.Redirect(strRedirect, True) End If Else Response.Redirect("webform3.aspx", True) End If End Sub
View 1 Replies View RelatedI know this is an easy one and I know I've read it somewhere, but I can't seem to write the correct format to run correctly. I am trying to build a SELECT statement base on the selected values of a dropdown list on a webform. The selected values will be part of the Table name.. ("client_info" & location_option.selecteditem.value) Can someone show me the correct syntax for adding a form variable into a SELECT statement? Thanks
View 1 Replies View RelatedI am currently trying to write a query that pulls a summation of item specific data from sales orders. For simplicity's sake, the column structure can be something like the following...
Item#,
PoundsDuringWeekNumber (this would be the current week number out of the 52 weeks in a year and the pounds of the item during that week)
However, those are not going to be the only 2 columns. The idea of the query is that the user would be able to provide the query a date range (say 2 months) and the columns would then morph into the following...
Item#,
PoundsDuringWeekNumber (current),
PoundsDuringWeekNumber(current - 1),
PoundsDuringWeekNumber (current - 2),
etc. etc.
PoundsDuringWeekNumber(current - 8)
Initial ideas where to create a function to execute the summation of the pounds during the date range of the week in question and execute it across the columns, but with the indeterminable number of columns, the query would not know how many times to execute the function.
The select statement:
SELECT DATEDIFF(n , LAG(CAST(Date AS DATETIME) + CAST(Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),
CAST(Date AS DATETIME) + CAST(Time AS DATETIME))
FROM [DataGapTest]
Gives the right output:
NULL
1
1
3548
0
However, when I put the statement in a function, I get only zeros as the output. It's as if the lag and current value are always the same (but they are not of course).
CREATE FUNCTION dbo.GetTimeInterval(@DATE date, @TIME time)
RETURNS INT
AS
BEGIN
DECLARE @timeInterval INT
SELECT @timeInterval = DATEDIFF(n , LAG(CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),
CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME))
FROM dbo.[DataGapTest]
RETURN @timeInterval
END
I have the below select command in my gridview that uses a library name.table approach in the sql. I created a label on the page and want to pass the label in where i have the libarary1 text in the select statement. This will allow me to swap out the production library with my development library when im working on the site (thru the use of a site variable)
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:as400con %>"ProviderName="<%$ ConnectionStrings:as400con.ProviderName %>" SelectCommand="SELECT * from library1.table WHERE COMPANY = ? and ack = ? and HORZN_DATE <= ?">
<selectparameters><asp:controlparameter name="company" controlid="accts" propertyname="SelectedValue"/><asp:controlparameter name="ack" controlid="podropdown" propertyname="SelectedValue"/><asp:controlparameter name="dt" controlid="htoday" propertyname="Text"/></selectparameters>
How would I insert a label.text value into the select statement replacing the library1 ? I tried to use the asp:controlparameter adding the text and placing a ? mark in place of the library1 but it failed.
Thanks for any help you can lend on this,
Todd
I need help. The security principal is the correct DomainUser, but the error message says I am not authenticated.
So here is my error Message:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Me.User.Identity.Name=CompanyDomainRyan; System.Security.Principal.WindowsIdentity.GetCurrent=CompanyDomainRyan; HttpContext.Current.User.Identity.Name=CompanyRyan
Generated by:
Dim secPrinc As System.Security.Principal.WindowsIdentity = System.Security.Principal.WindowsIdentity.GetCurrent
Me.lblError.Text = ex.Message & vbCrLf & vbCrLf & "Me.User.Identity.Name=" & Me.User.Identity.Name & "; System.Security.Principal.WindowsIdentity.GetCurrent=" & secPrinc.Name & "; HttpContext.Current.User.Identity.Name=" & HttpContext.Current.User.Identity.Name
Here is the Connection String:
Private ConnString As String = "Server=10.144.162.111;Database=DNS;Trusted_Connection=True"
IIS has 4 websites hosted on it. The parent level allows anonymous with windows auth off, but the website level has anonymous off with widnows auth and digest.
In IIS, is there a problem with having the parent level anonymous and website level windows auth?
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View 5 Replies View RelatedHi,
I really need some help trying to figure out why my gridview is not working when I create a custom sql statement. It "executes" the query, but gives me an error message when I "test the query". Here is the error message: "There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct. Syntax error: Expecting '.', identifier or quoted identifier."
Here is my sql statement:
SELECT TBLPROJECTS.NAME, TBLPROJECTTYPES.NAME AS PROJECTTYPE, TBLPROJECTS.DESCRIPTION, TBLUSERS_1.LOGIN AS OWNERNAME, TBLUSERS.LOGIN AS MANAGERNAME, TBLPROJECTS.START_DATE, TBLPROJECTS.END_DATE, TBLAOI.NAME AS AREAOFINTEREST, TBLPROJECTS.MANPOWER, TBLUNITS.NAME AS MANPOWERUNITFROM TBLPROJECTS INNER JOIN TBLAOI ON TBLPROJECTS.AOI_ID = TBLAOI.ID INNER JOIN TBLPROJECTTYPES ON TBLPROJECTS.PROJECTTYPE_ID = TBLPROJECTTYPES.ID INNER JOIN TBLUNITS ON TBLPROJECTS.MANPOWERUNITS_ID = TBLUNITS.ID INNER JOIN TBLUSERS ON TBLPROJECTS.MANAGER_ID = TBLUSERS.ID INNER JOIN TBLUSERS TBLUSERS_1 ON TBLPROJECTS.OWNER_ID = TBLUSERS_1.ID
I have tested it on a new project and still it does not work, I cannot find any problem, please help!!!!!!!!!!!!!!!!!!!!!!!!
I have a form that has 4 fields to fill in. I have a button that can add these fields to a sql database. I also want to put a button next to the "add" button so you can fill out the same fields and search for those values. Here's what i have so far. I want to select based on the fields, but i'm having trouble with the syntax of the parameters. I also want to add something, so if nothing is filled out in one of those boxes, it retuns back all records for the default value.
string strConnection = ConfigurationManager.ConnectionStrings["TimeAccountingConnectionString"].ConnectionString;
SqlConnection myConnection = new SqlConnection(strConnection);
String selectCmd = "SELECT * FROM users WHERE firstname = @firstame or lastname = @lastname or office = @office or team = @team";
SqlDataAdapter myCommand = new SqlDataAdapter(selectCmd, myConnection);
myCommand.SelectCommand.Parameters.Add(new SqlParameter("@firstname", SqlDbType.VarChar, 50));
myCommand.SelectCommand.Parameters.Add("@firstname", txtFirstName.Text);
myCommand.Parameters.AddWithValue("@lastname", txtLastName.Text);
myCommand.Parameters.AddWithValue("@team", dwnTeam.Text);
myCommand.Parameters.AddWithValue("@office", dwnOffice.Text);
DataSet ds = new DataSet();
myCommand.Fill(ds, "users");
MyDataGrid.DataSource = ds.Tables["users"].DefaultView;
MyDataGrid.DataBind();
I am using a sqlDataSource to read my query and to put the rows into a gridview. Now I want to read just a couple of rows from my query based on a maximum number, also defined in the table. I have absolutely no idea how to do that..for example: I want to view only the 10 most recent subsciptions into my gridview. The subscriptions are stored into tabel Subscriptions which has values id, userid,date. Table Event has a parameter "maximum subscriptions" (which is 10 in my example) I hope it is clear enough?Thank you in advance!BlueiVeinz
View 2 Replies View RelatedI cant seen to change the Select command for a SQL Datasourcetry #1 SqlDataSourceProfilesThatMatch.SelectCommand = strSQLForSearch SqlDataSourceProfilesThatMatch.SelectParameters("ProfileID").DefaultValue = pProfileID SqlDataSourceProfilesThatMatch.SelectParameters("LoggedInUsersZipcode").DefaultValue = pUsersZipCode SqlDataSourceProfilesThatMatch.SelectParameters("ZipDistance").DefaultValue = pDistance
NewProfilesThatMatchGridView.DataBind()
try #2 SqlDataSourceProfilesToBeMatched.SelectParameters.Clear() SqlDataSourceProfilesThatMatch.SelectCommand = strSQLForSearch SqlDataSourceProfilesThatMatch.SelectParameters.Add("ProfileID", pProfileID) SqlDataSourceProfilesThatMatch.SelectParameters.Add("LoggedInUsersZipcode", pUsersZipCode) SqlDataSourceProfilesThatMatch.SelectParameters.Add("ZipDistance", pDistance)
NewProfilesThatMatchGridView.DataBind()
No errors but no rows show in the gridview. If I debug and get the value strSQLForSearch and paste it into a new SQL query window I get results.
Any ideas????
Thanks
Hi there,I am not sure how many of you have experienced this problem before but here is how to replicate it: Add a GridView, SqlDataSource and Button to a new projectSet the DataSourceID to the SqlDataSource objectSet AllowPaging to True on the GridViewWithin the Button1_Click sub, change the SqlDataSource.SelectCommand to a new Query e.g SELECT * FROM table WHERE ID > 1Run the project Click on another page, i.e. "3" on the GridView SqlDataSource.SelectCommand is now blank(!), thus Gridview displays nothing. Has anyone else found a solution to this annoying issue? Any help is appreciated.Regards
View 5 Replies View RelatedUsing 3.5
If I have a sqldatasource on the page, is it run if it is not bound to a data object like a gridview?
Seems like if i want to access the data (like set a label text) from the sqldatasource I have to use code to first create a dataview then pick throught it. This seems like I'm running it twice. I'm new at .net so I dont know how to tell.
I don't want to write data select code programatically when I can just through an SDS on the page, but wondered it it ran just because it's on the page.
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...