Is there a way to group by a derived value? For example, in the query below, is there a way to group the results by the AgeBracket field? I'd like to see adults (0) in one grouping and children (1) in the other.
SELECT AgeBracket = CASE WHEN dbo.GetAge(DOB, GETDATE()) > 18 THEN 0 ELSE 1 END, COUNT(*)
FROM tableX
Thanks!
Is there a way to group by a derived value? For example, in the query below, is there a way to group the results by the AgeBracket field? I'd like to see adults (0) in one grouping and children (1) in the other.
SELECT AgeBracket = CASE WHEN dbo.GetAge(DOB, GETDATE()) > 18 THEN 0 ELSE 1 END, COUNT(*)
FROM tableX
GROUP BY ?
Thanks!
how to declare multiple derived columns in SSIS Derived Column Task in one attempt.as i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.
View 4 Replies View RelatedI have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
Hi!
I've posted a feedback with Microsoft to see if we can get them to fix the issue described below, but so far no one from Microsoft has commented to let us know what they're doing about this problem! I'm posting this here to see if maybe we can get more people to rate this feedback or chime in on what a pain it is! Please feel free to add your own comments or how you had to work around this issue and whether or not you think this is something Microsoft should be addressing NOW.
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=311679
Provide Individual Page Numbering per Group and Total Pages per Group
Currently in a Reporting Services report, you can't readily reset the page number for each group in a table, nor can you display the total number of pages per group. For example, if I'm printing invoices and each invoice is a separate group, I'd like to be able to print "Page 1 of 5" , "Page 2 of 5" etc. for the first invoice, then "Page 1 of 3" when the next invoice begins, and so on. This was easy in Crystal Reports. I realize that Crystal Reports has a two-pass process that enables that kind of pagination. However, this is REALLY important functionality that's just missing from Reporting Services and I'm hoping you'll provide it REALLY SOON! Yeah, I know there are work-arounds if you can know exactly how many rows of information there are on each page. But gosh! That's not practical, especially if you have second level groups inside the main group or text blocks in rows that can 'grow' to more than one line. I've read a couple of work-arounds, but none of them works correctly and consistently when more than one user is running the same report or when you print the report while you're looking at it on the screen. I still may need access to the overall report page number and the overall total number of pages, so don't get rid of that. It's just that if you're doing this already for the entire report, I don't see why you can't do it per group! Lots of people have been asking for this for years, and I don't understand why it hasn't been implemented.
I've read a few articles on this topic, but no one has come up with a decent work around. My theory is that Microsoft should be addressing this immediately. This is major functionality that's just plain missing from SSRS and should have been there from the start. If anyone from Microsoft can let us know what's going on with this issue or if anyone would like for me to clarify this further, feel free to let me know.
Thanks!
Karen
I have an SSRS report with groups that when exported to excel contains drill-in's (plus marks on left side). The issue I have is that for all the groups in the drill-in, those cells become merged. I want to keep the group drill-in but have the cells UNMERGED. I have heard this can be done with the RDL XML but I don't know what to modify to accomplish this.
View 4 Replies View RelatedI'd like to ask how you would get the OUTPUT below from the TABLE below:
TABLE:
id category
1 A
2 C
3 A
4 A
5 B
6 C
7 B
OUTPUT:
category count id's
A 3 1,3,4
B 2 5,7
C 2 2,6
The code would go something like:
Select category, count(*), .... as id's
from TABLE
group by category
I just need to find that .... part.
I have a user in SQL Server with a NT login of Mike
I changed his NT account to Mikel in User Manager
Now when I try to add Mikel, Im getting error 15401.
Do I need to delete NT login in SQL Server 'Mike' account first ?..before adding 'Mikel' ?
Can I go into the Master database and just change Mike login to Mikel ?
Thank you
I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:
Year
Month
Date
And the following row groups:
Region
Product
SubType (hidden, data at the date level is summed to Product)
At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)
select top 15 count(*) as cnt, state from table
group by state
order by cnt desc
[code[...
Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.
I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.
View 1 Replies View RelatedI have one domoain in the forest. The domain level is set to Windows 2000 native mode and forest level is set to mixed mode. My SQL server 2005 server joined to this domain. I added a brand new domain local group and add a normal user account to this domain local group. I login to the SQL server 2005 server and make a query "SELECT * FROM sys.login_token". I cannot see my domain local group in sys.login_token. However, if I add my account to a global group, I can see it there.
Then, I setup another forest. This time, I have domain level set to Windows 2003 mode and forest level is set to Windows 2003 native mode. I do the same testing. This time, I can see my domain local group in sys.login_token.
Why does SQL server 2005 has this limitation? Is it a bug?
HiI am new to SQL and am having a problem. I need to fix my query to do the following...2) get a total of the number of rows returned.
DECLARE @StartDate varchar(12)DECLARE @EndDate varchar(12)DECLARE @Region varchar(20)
SET @StartDate = '01/01/2002'SET @EndDate = '12/31/2008'SET @Region = 'Central'
SELECTA.createdon,A.casetypecodename,A.subjectidname,A.title,A.accountid,A.customerid,A.customeridname,B.new_Region,B.new_RegionName
FROM dbo.FilteredIncident AINNER JOIN dbo.FilteredAccount B ON A.customerid = B.accountid
WHERE (A.createdon >=@StartDate AND A.createdon <= @EndDate)AND (B.new_RegionName = @Region)AND (A.casetypecode = 2)
I'm new to MSSQL 2005 and want to get a summary of a log table. I want to count all the rows for each date based on a DATETIME field called 'post_date' that holds the date and time of each record's creation.
this is the best I can come up with:
Code:
SELECT
DISTINCT(LEFT(post_date,11)) AS post_date, COUNT(DISTINCT(LEFT(post_date,11))) AS total_posts
FROM log_directory_contacts
GROUP BY post_date
The results show each date but the count column ('total_posts') returns '1' for every row even when I know their are more than 1 record on that date.
What am I doing wrong? Thanks!
Hi folks,
I have a Projects , each project have many tasks now i want to display tasks replated to each project:
for example:
Project1-------------------->task1
task2
task3
task4
Project2----------------------->task4
task5
task6
.............................................projectN.....................
how to write query for this
i have 2 tables:
Project .......>columns are projectid
Task------------->columns are projectid, taskid
|
I have a matrix with two row groups and one column group with about 6 items in it. I have about 2100 rows at the lowewst row group level. This report was built solely for excel export. The first row group has about 20 items and controls the visibility of the other group. When I toggle the visibility of the second row group, how can I make the the header of the first row group copy down for each row of the other row group? The first row group is the Section and the second is Mnemonic.
Example:
Now:
Code Snippet
Column Column
Section1 -
Mnemonic
Mnemonic
Mnemonic
Mnemonic
Section2 -
Mnemonic
Mnemonic
Mnemonic
Mnemonic
Should be:
Code Snippet
Column Column
Section1 -
Section1 Mnemonic
Section1 Mnemonic
Section1 Mnemonic
Section2 -
Section2 Mnemonic
Section2 Mnemonic
Section2 Mnemonic
I have a code like this:
SELECT Node_ID,Day,Operation, AA,BB
FROM
(SELECT
CASE
WHEN Operation LIKE 'NOTIFY' THEN SUM(Total_request) ELSE 0 END AS AA,
CASE WHEN OPERATION LIKE 'SEARCH' THEN SUM(Total_requests) ELSE 0 END AS BB,Node_ID,DAY,Operation
[code]....
So i want to make two columns by the name of operation. in the real code AA and BB are calculates with many counters. My code doesn't work, I have an error: "not a single-group group function" .....
Hi,I was hoping someone may be able to help me with a tricky T-SQLproblem.I need to come up with a SELECT statement that does basically thefollowing:Select RCRD_REFNO, MAX(MODIF_DTTM) as MODIF_DTTM from[StageDb].[dbo].tblPersonInfo group by RCRD_REFNOHowever, I need to select ONLY the TOP 1 of each group (i.e. only 1record for each unique RCRD_REFNO). The problem is of course that if Iadd 'top 1' after select, it only brings back 1 record full stop,rather than 1 for each group!Now, I have previously come up with a similar query that DOES do thissuccessfully, but it relies on a criteria (such as a unique identifier)-unfortunately, the nature of the table I'm using for this currentjob means that it actually doesn't have a primary key, as it'ssimply a staging area for raw data, and can even have completelyidentical records in it. I think the only way I'm going to be able todo it is to literally use the 'TOP' command somehow, but am notsure how to adapt the above to implement it...I'd be very gratefulfor any advice.Many thanks
View 6 Replies View RelatedHere is my Table Structure ( from Oracle database)
Team | Customer Code | Amount | Credit Limit
1 , a, 100, 1000
1 , a , 200, 1000
1 , b, 100, 100
1, b, 1000, 100
1, b, 2000, 100
2, a, 100, 2000
For the Report, I want to group the Team and Sum each customer total Amount and Show the Exceed limit amount.
Here I want to present
Team Customer Code Amount Credit Limit Exceed
1 a 300 1000 0
1 b 3100 100 3000
Team Total 3300 3000
2 a 100 2000 0
Team Total 100 0
Total 3400 3000
BUT it turn out..
Team Customer Code Amount Credit Limit Exceed
1 a 300 1000 0
1 b 3100 100 3000
Team Total 3300 2300 ( Problem here a )
2 a 100 2000 0
Team Total 100 0 ( Problem here a )
Total 3400 2400 ( Problem here b)
I Grouped the Custoer Code and Team I can preform the sum
however I can't Do the Exceed total
becoz the value should be
iif (Sum(amount)>(Creditlimt) , Sum(amount)-First(Creditlimt), 0)
but for the team total in team 1 the result is 2300 ( 3300 - customer a 's limit) not add from exceed amount
And the finial total it turns out 2400 (3400 - 1000)
I have tried use the coding to sum up the exceed
but I found that the group total is sumup first than the sum up the detail :
Team Customer Code Amount Credit Limit Exceed
1 a 300 1000 0
1 b 3100 100 3000
Team Total 3300 0
2 a 100 2000 0
Team Total 100 3000 ( The Total from Team 1 ! )
Total 3400 0 ( Problem here b)
this situration , I can't change the query statement
I can do the good result for CR report
but for reporting service 2005, I can't to the first report result
Any one can help me ??
thank you
OK....I know how to write a query to return for example :
All the people that ordered X and Y
but how do I write one for:
All the people that ordered X but not Y?
Thanks,
Trey
I have 3 tables TableA , TableB and TableC
I have to update tableA with the value of TableB by checking A.Field=B.Field
and TABLEB as condition that B.Field should exists in tableC
Update A Set A.Field=B.Field From tableA A
(select B.Field From TableB B where B.Field=A.Field and B.Field in (select C.Field
From tableC C))
How to do it correctly.
Thanks in advance
Hi, wondering if anyone can help me. I currently have a field that has a date and time in it in the format dd/mm/yyyy hh:mm:ss. Ideally I would like to get rid of the time part of it altogether but for it to still be recognised as a date as opposed to a string. However, I've been told that this is not possible in 2005, is this true? If this is the case, what would be the best way to set the time to 00:00:00 after the date for all records on that field?
View 1 Replies View RelatedHi. We have to create an export from our system to be imported into another system. To get the data out we need to create some SQl but we're struggling a bit.
I presently have the following code
SELECT ProSolution.dbo.StudentDetail.RefNo, ProSolution.dbo.StudentDetail.FirstForename, ProSolution.dbo.StudentDetail.Surname,
ProSolution.dbo.StudentDetail.MobileTel, ProSolution.dbo.StudentDetail.RestrictedUseIndicatorID, ProSolution.dbo.Enrolment.CompletionStatusID,
ProSolution.dbo.Offering.Code
FROM ProSolution.dbo.StudentDetail INNER JOIN
ProSolution.dbo.Enrolment ON ProSolution.dbo.StudentDetail.StudentDetailID = ProSolution.dbo.Enrolment.StudentDetailID INNER JOIN
ProSolution.dbo.Offering ON ProSolution.dbo.Enrolment.OfferingID = ProSolution.dbo.Offering.OfferingID
WHERE (ProSolution.dbo.StudentDetail.AcademicYearID = '06/07') AND (ProSolution.dbo.StudentDetail.RestrictedUseIndicatorID = '9') AND
(ProSolution.dbo.Enrolment.CompletionStatusID = '1')
The above code returns the data one line per course but we need it to be one line per student with all their courses on one line too, like follows.
567897 Tom Smith 07111 111111 TCFT1 CKSAN1 DHICS
Can anyone give us any guidance please?
Thanks
Chip
Guys, this is what I want to do. How can I do this ?Select employid,Gross=( Select sum (uprtrxam) from Fleet..upr30300 where pyrlrtyp=1),DedofWages=( Select sum (uprtrxam) from Fleet..upr30300 wherepyrltyp=2),Gross-DedofWagesfrom FLEET..UPR00100The problem is the third field (Gross-DedofWages). It says Invalidcolumn. Any ideas ?Thanks, Girish
View 3 Replies View RelatedI have two columns made up of 4 digits numbers eg col1 1234, col2 9876
I want to create a derived column so i get a eight digit column, eg col3 12349876
I cannot seem to get the expression right, I seem to be always adding the value which i do not want, can someone help me out with the expression
Thanks
Robbie
I am trying to transfer data from SQL Server 2005 table to another SQL Table. In the source table there is a field called Region [nvarchar(max)]. The values for these fields will be like APAC-China, NA-Racine, etc., i.e Region followed by the country name seperated by - symbol. I want the destination tablre with 2 fields Region[nvarchar(max)] and Country [nvarchar(max)]. I am using a Derived Column task to achieve the same.
Can anyone please help me out in doing this data conversion?
Thanks
Hi,
I am doing a task which will get all data based on several base and crosswork tables. I used stored procedure to get the data, but the next step will be using derived column to massaging data, and to load to the destination database. Is there a way to do that since I must generate data on the fly?
Thanks,
Megan
Hi Guys,
How can i put in a derived column the value of 3 columns? I've tried these:
[MyId]+[Paper1]
"[MyId]+[Paper1]"
but no luck. How can i put it right?
Thanks
Gemma
I am trying to create a derived column from two separate fields. One is a date field in format of 2008-03-01 and one is a time field. In DTS I use to have something like this:
DTSDestination("TransactionDate") = cdate(DTSSource("DSRHDATI")) & " " & timevalue(DTSSource("DSRHTIME"))
I am trying to figure out how to do this in SSIS. I know I have to use a dervived column but can't seem to come up with the correct syntax. Any help would be apprecaited. thanks.
Stacy
i have a column in my table that will store the sum of 3 other column, e.g the data in total_book column will be equal to the sum of the number in the romance, fiction and thriller column. how do i do this?
I would like to creat a new column called Load_Dt and hard-coded as 06/30/2006 ( date data type) in derived transformation... how can i do this?
Hi,
I have built a database for a university project, but am having trouble with the SQL syntax for inserting derived data from a calculation into a table. At present my SQL is;
INSERT INTO MemberPayment (TotalCharge) VALUES ( [Total] )
SELECT ((MileageHistory.MileageUrban * Vehicle.EmissionsPerGramUrban) * 0.05) + ((MileageHistory.MileageCountry * Vehicle.EmissionsPerGramUrban) * 0.05) AS 'Total'
FROM [NeuCar].[dbo].[MileageHistory] JOIN [NeuCar].[dbo].[Vehicle]
ON MileageHistory.Registration = Vehicle.Registration
JOIN [NeuCar].[dbo].[Member] ON Vehicle.UserName = Member.UserName
WHERE Member.UserName = 'wenger1' AND (MileageHistory.[Date] >= CURRENT_TIMESTAMP - 30);
Would anybody be able to point out where I am going wrong? I would very much appreciate any advice,
Kind regards,
Chima
Hi Folks,
Is there any way to add a derived column into the where clause.
Example:
Select Name, Date, Procedure#,
(Case When Procedure# in ('1','2','3') then 'Y' else 'N') AS Class
From Procs
Where Class = 'Y'
Thanks,
Ray