HELP With SQL Query: Select Multiple Values From One Column Based On &&<= Condition.
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
ADVERTISEMENT
Sep 26, 2007
Hi,
I have a table as follows
Table Master
{
Id varchar(20),
Cat1 datetime,
Cat2 datetime,
Cat3 datetime,
Cat4 datetime
}
and the data in the table is as follows
Table Master
{
Id cat1 cat2 cat3 cat4
-----------------------------------------------
1 d11 null d13 d14
2 d21 d22 d23 d24
3 NULL d32 d33 d34
4 d41 d42 NULL NULL
}
I want to retrive column names and its values wheb the ID matches to some value.
Can any one please let me know how to do this?
Thanks alot
~Mohan
View 3 Replies
View Related
Sep 21, 2007
Hi,
I have at table as foolows
Table Cat3
{
ID,
Update datetime
}
and also have a master table as follows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime
}
My requirement is to alter themaster table schema i.e to add a column with the name as of the table name i.e Cat3 and will lok lie as foolows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime,
Cat3 Datetime
}
I would like to insert the data to this column. The sample output is as follows
Before insertng the data of table ;Cat3' into the Master table
Table Master
{
Id Cat1 Cat2
---------------------------------
1 D1 D2
2 D2 NULL
3 D3 D4
}
And The Cat3 table data is as follows
Table Cat3
{
ID Update
--------------------------
1 D5
3 D6
4 D7
}
The final putput of the master table should be as follows
Table Master
{
Id Cat1 Cat2 Cat3
------------------------------------------------------
1 D1 D2 D5
2 D2 NULL NULL
3 D3 D4 D6
4 NULL NULL D7
}
Can any one please let me know the query to achieve this
Thank you very much for your time and support
~Moahn
View 10 Replies
View Related
Jun 17, 2015
I have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
View 3 Replies
View Related
Jul 31, 2015
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
View 5 Replies
View Related
Oct 9, 2015
I am using SQL server 2012 and Report builder 3.0 to build my report. I have build a report which product the following table
What I try to achieve is to add 2 calculated field at the bottom of the table which will represent 2 Total value based on a condition
OutTotal field should show the SUM of the Quantity only for ItemStatus=0
InTotal field should show the SUM of the Quantity only for ItemStatus=1
IMPORTANT : I cannot group my data because I need to shown them in a time Wise flow
I have try to insert the first field and define an expression but it gives an #Error. The expression I used is as below
=SUM(IIF(Fields!ItemStatus.Value = 0, Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value,0))
The Quantity filed in my table is calculated from expression Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value
View 2 Replies
View Related
Mar 5, 2006
Supose I have the following select:
Select Name, Age, (select TelNums from Telephone)
From Person
The problem is that (select TelNums from Telephone) can return more than 1 record:
tel1
tel2
.
.
.
I was wondering how I can make a select to return the tel numbers like: 'tel1,tel2,tel2'
»»» Ken.A
View 3 Replies
View Related
Jun 10, 2015
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
My script is here, and the sample result is attached. How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
a.Customer_Status_Txt,
a.Legal_Entity_Type_Txt,
a.Business_Unit_Txt
FROM dw_mart.dbo.DimCustomer a
[code]....
View 1 Replies
View Related
Nov 26, 2015
I am writing a query and have the bulk of it already written.
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like this
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I know I'm missing something....
View 3 Replies
View Related
Feb 16, 2005
Can someone give me a clue on this. I'm trying to insert values based off of values in another table.
I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year).
Two questions
1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great.
2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated.
Thanks in advance, bellow is the code that I have so far:
RB
Select Results.custID, Results.PledgeLastYr
From Results, PledgeInLastYear
Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear
Insert Into Results(PledgeLastYr)
Values ('Y')
View 1 Replies
View Related
Sep 7, 2015
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
View 2 Replies
View Related
Apr 6, 2008
Using SQL Server 2005 Express:
I'd like to know how to do a SELECT Query using the following tables:
Miles Table:
Date/Car/Miles/MilesTypeID
===============
(some date)/Ford/20/1
(some date)Ford/20/2
(some date)Chevy/30/1
(some date)Toyota/50/3
(some date)Ford/30/3
Miles Type Table
MilesTypeID/MilesType
=================
1/City
2/Highway
3/Off-Road
I'd like the results to be like this:
Date/Car/City Miles/Highway Miles/Off-Road Miles
=====================================
(date)-Ford-20-0-0
(date)-Chevy-0-20-0
(date)-Ford-20-0-0
(date)-Toyota-0-0-50
(date)-Ford-0-0-30
Anyone? Thanks in advance!
View 3 Replies
View Related
Jun 10, 2015
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
[code]....
View 6 Replies
View Related
Nov 20, 2013
I have a column with serial numbers 1, 2,3,4,....etc...I want to have P1 for first 4 serial numbers to be displayed in a separate column beside Serial number column and for the next four serial numbers (5,6,7,8) it should be P2 and like that I want till P13 and for next again it should start with P1(I mean after P13 it should give again P1 instead of P14) and continue the same process.
Column name of Serial number is [S.No]
table name for example is #temp1
View 3 Replies
View Related
Aug 28, 2007
Hi,
I have the following scenario :
CustomerDetail
customerid
customername
status
app_no
[status = 0 means customer virtually deleted]
CustomerArchive
archiveno [autoincrement]
customerid
customername
status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1
create proc spoc_startdeletion
as
declare @app_no int
select @app_no = (select app_no from customerdetail where status=0)
EXEC spoc_insertcustomerarchive @app_no
-- After transferrin, physically delete
delete from customerdetail where status=0
proc2
create proc spoc_insertcustomerarchive
@app_no int
as
insert into customerarchive(customerid,customername,status)
select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
Vidkshi
View 15 Replies
View Related
Feb 25, 2015
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
View 7 Replies
View Related
Oct 3, 2007
i have the folowing databases DB1,DB2,DB3,D4,DB5........
i have to loop through each of the databases and find out if the database has a table with the name 'Documents'( like 'tbdocuments' or 'tbemplyeedocuments' and so on......)
If the tablename having the word 'Documents' is found in that database i have to add a column named 'IsValid varchar(100)' against that table in that database and there can be more than 1 'Documents' table in a database.
can someone show me the script to do it?
Thanks.
View 3 Replies
View Related
Nov 6, 2014
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
its taking so much of time how t o solve ?
View 1 Replies
View Related
Mar 28, 2014
select '$ '+ CONVERT(varchar,CONVERT(decimal(10,0),CONVERT(money, Amt_Value)),1) as [Amount]
from Products
How can I sum this column values and need to set a validation like the column has null values it has to return zero.
View 2 Replies
View Related
Jun 26, 2015
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
CREATE TABLE #TABLE1(ID INT)
INSERT INTO #TABLE1 VALUES (1), (2) , (3) , (4)
DECLARE @ID varchar(8000) = '2,4'
[code]....
View 4 Replies
View Related
May 19, 2006
How do I:Select f1, f2, f3, from tb1 where f1=Select f1 from tb2 where f1='condition'?
View 3 Replies
View Related
Jul 4, 2015
I have a table called names (firstname, lastname, number) then i have a DECLARED variable called @displaynum...If @displaynum id true my select query should select the number column. if the variable is false , only the first two columns are selected.
e.g @displaynum = true
@displaynum = false
Firstname | Lastname | number Firstname | Lastnam
blah | blah | 12345
blah | blah
i am not sure if this is possible as a case still selects the column but just changes the values.
View 12 Replies
View Related
Feb 9, 2006
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
View 1 Replies
View Related
Jun 12, 2008
create function stzipcustinfo
( @campaign varchar(50), @startdate datetime, @enddate datetime,@audience_type char(10) )
RETURNS TABLE
AS
RETURN
(Select distinct t.campaign,t.Sopnumbe,t.Custnmbr,t.Custname,
t.Address1,t.Address2,t.City,t.State,t.Country,t.Zipcode, t.Phone,sum(t.totalquantity) as Totalquantity,
t.Audience_type
from
(
select distinct
v.sopnumbe, v.campaign, v.custnmbr, v.custname, v.address1, v.address2,v.city,v.state,v.country,v.zipcode,
v.Phone, v.totalquantity as totalquantity,
case @audience_type
when v.custclas then v.custclas
end as audience_type
from vwstzipcustaudienceinfo v
Where (v.itemnmbr = '' or v.itemnmbr=v.itemnmbr) and v.Campaign = @Campaign and (v.docdate between @startdate and @enddate)
) as t
where t.audience_type is not null
group by t.campaign,t.Sopnumbe,t.Custnmbr,t.Custname,
t.Address1,t.Address2,t.City,t.State,t.Country,t.Zipcode, t.Phone, t.Audience_type
)
--select * from mystatezipcustaudienceinfo('cpd','1/1/2008','5/15/2008','INDPATIENT') --getting 500rows
--select * from mystatezipcustaudienceinfo('Cpd'','1/1/2008','5/15/2008','INST-HOSPITAL') -- note getting single row
problem have a “-“ in them..i m not getting result..so what condition should be in red color one..
thanks
View 7 Replies
View Related
Jul 22, 2014
I need to write SP where user select SUN to MON check boxes. If user select Class A with sun,mon and wed check boxes then i need to insert data as below
CLASS Days
A sun
A Mon
A wed
View 6 Replies
View Related
Feb 22, 2007
Greetings,
I need to avg column data based on grid textboxes. I cannot use AVG because the column values come from a comma delimited string. I have tried using !Parameters to store a count and total for each column but they are always read only. What is the best approach.
The columns come from a field which is in the format of (99,75,60,100,-1,20,-1,80,75) for each record
-1 means the values are not counted in the average. I have a function for each textbox that parses the value from the list based on the column index. There can be 1 to many columns.
Everytime I to set the value of a field or parameter at runtime I get a read-only error.
Maybee the only way is to use calculated fields.
Any ideas.
View 2 Replies
View Related
Apr 26, 2015
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
Dec 16, 2007
Hi all,
I have to write a select query which need some logic to be implemented.
Query is like
select name,number,active,
if active ="true" then
select @days=days from tbl_shdsheet
else
@days=''
end
from tbl_emp
In the above query there will be days row for that employee if active is true else there won't be any data for that emp in the tbl_shdsheet
So how can i write queery for this.
View 3 Replies
View Related
Nov 21, 2007
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
View 10 Replies
View Related
Dec 12, 2014
There is a table [Formula_Calc] with formula calculations that need to be replaced with relevant values based on another table [Totals]
[Totals]
RowNo|Total
F1|240
F2|160
F3|180
F11|1000
F12|1500
F13|2000
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16.
Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100);
DECLARE @Total NVARCHAR(100);
SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total)
FROM [Totals]
SET @Total='select '+@formula
EXECUTE sp_executesql @Total;
PRINT @Total;
View 3 Replies
View Related
Sep 22, 2015
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
View 2 Replies
View Related
Nov 2, 2015
I have the following result query :
Which is produce by following SP :
SELECT
P.StoreID,
P.InventoryDate,
P.ProductID,
SUM(PIT.Quantity * P.ItemUnitWeight) AS TotalWeight,
SUM(PIT.UsedQuantity * P.ItemUnitWeight) AS UsedWeight,
[code]....
What is the way to add a calculated columned Named "Stocked" which will represent the sum of "Remaining" column for each rows ?
View 9 Replies
View Related
