I am getting a backup file in default directory by using this script
Code Block
BACKUP DATABASE CPHONE
TO DISK = 'CPHONE.Bak' -- send to default pathaway
WITH FORMAT,
NAME = 'Full Backup of CPHONE'
Is there any way to find where is the default path of the SQL server, in order to show to the user from a VB program in which pathway the database back up is stored
WE HAVE RECENTLY MOVED THE MSSQLBACKUP FOLDER TO EMC DRIVES E:, BUT SQL IS STILL DEFAULTING BACKUPS TO THE ORIGINAL DEFAULT LOCATION WHICH WAS ON THE D: DRIVE. DOES ANYONE KNOW HOW TO CHANGE THIS? I KNOW THE ORIGINIAL LOCATION IS STORED IN THE REGISTRY, BUT I DON'T KNOW IF I CAN CHANGE THE REGISTRY OR IF THERE IS A DIFFERENT PLACE. CAN SOMEONE PLEASE HELP.
THANKS
Hello!MSQL2000:I want to make db-backup (maintenance) but haven't enough space on thediscs that are physically in the machine. I have enough on the network, buti can't choose an network-drive, wheni want to specify the backup directory.What to do?/Bjørn
View 3 Replies View RelatedHi,
I had SQL Server 2000 installed like below:
Installation Directory = C:Program FilesMicrosoft SQL Server
Default data directory = D:
Default log directory = D:
I found out that the data is stored in D:Program FilesMicrosoft SQL ServerMSSQLdata and backup is done in D:Program FilesMicrosoft SQL ServerMSSQLackup
However, Microsoft says we should never put the ..ackup and ..data folders in the same partition.
My question is: How can I move the path of the backup directory?
I checked the registy but this is what I found:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServerMSSQLServer
..BackupDirectory=C:Program FilesMicrosoft SQL ServerMSSQLackup (<-- note it is pointing to C: not D:)
..DefaultData=D:
Can somebody help please?
Hi
I want to change the default backup location of MSSQL. I know we can configure it while installing. But I want to change the default backup location of a particular database, running on a database server.
The default location is like.
Program FilesMicrosoft SQL ServerMssqlBackup
Thanks in advance,
Prasanna.
I am confused regarding why the default behavior of this option is to use file no 1 if the option is not specified? If I take two backups on different days, weeks, months, etc. and write them to the same Backup set, the second and most recent backup by the way gets the higher file number (position) as one would expect. What is incomprehensible to me is why the decision was made to restore the oldest backup from the backup set if you do not specify with file no? Seems like common sense that I would NEVER want to restore the oldest backup by default and would most-likely always want to restore the most recent backup by default!
If anyone has suggestions on how I could suggest that the behavior of this option be changed, I would appreciate it, as this has caused me much pain.
Tim
Where can I find info about how to backup Sql Server 2005 using a .bat file?
Is it possible doing it this way?
If so, can anyone direct me to some links how how to do this?
If not possible using a bat file... then how can I make schedueled backups? What tool to use and hopefully free.
I am getting following error:
"The log in this backup set terminates at LSN 9566000024284900001, which is too early to apply to the database. A more recent log backup that includes LSN 986000002731000001 can be restored."
If I am missing to restore previous log backup file, how to find which LSN mapped to which log backup file (.trn file name)? Another word looking at LSN can we tell which log backup file is missing?
I tried to add volume to default data & log directory of "new data default location" of database setting at SQL server properties, but it never be saved, when I get in properties again, the setting is disappear.
Does somebody could advise me how to save it?
Thank you
Ting
I would like to know how to change the default data directory in SQL Server Express. I have a partitioned hard disk with SQL Installed on the C: drive. I would like to move the data to d: drive. I have just installed SQL and do not have any databases. I have installed SQL with advanced services.
Thanks in advance for your response.
I went ahead and installed RS even though it was clear Microsoft install was confused (re: preivous post). Now I get to experience the thrill of configuration hell.
Report Server Virtual Directory had a green check. Unfortunately the Name block says <Not Set>. When I try to create a New... default directory I get the error message: "The virtual directory could not be created. The previously set virtual directory will still be used."
Does anyone know where the <Not Set> virtual directory is stored on the computer?
addl info:
ReportServicesConfigUI.WMIProvider.WMIProviderException: The virtual directory specified already exists. Specify a different name.
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.CreateVirtualDirectory(String virtualDirectory, String path)
(Vista Ultimate)
I'm requesting of our dba that he create a database with recovery simple for my peer and I to start using. I'm asking him to give us db owner on this db so we can create schemas, tables, views, procs, do table inserts, deletes etc etc. what sql permission (if any) would allow my peer and I to do a backup once in a while to the default sql directory for backups? And for that matter a restore from there.Â
View 7 Replies View RelatedHi, I've installed SQL 2005 and failed to change the default datalocation during installation. Now I want to change it. Can I do thiswithout having to uninstall and reinstall? And furthermore, is there asystem stored procedure I can use to move existing data and log files(master, msdb, AdventureWorks, etc.)? I seem to remember doing justthis with SQL 2000 some time back.Thanks,Eric
View 2 Replies View RelatedI've created a number of very large databases in Ms Access that I would like to upsize to SQL Server Express. I changed the default data directory location to point to a separate drive with over 400GB of free space on my home pc. However, everytime I try to upsize or link databases using the MS Access Upsizing Wizard the data is saved in the Data directory on my current hard drive and is not saved in the default location I specified. If I create a new database in SQL Express it is saved to the new location. Any ideas on how to force upsizing or uplinked data to go to the new default data location?
View 1 Replies View RelatedI want to change the default directory for my stored procedures. It is extremely inconvenient for me that they are placed in documents and settings... I cannot find a place in the Tools where I can change it.
Thanks.
Hi folks,
Can you please tell me how should I change the default root directory (used for db storage) in SQL 2005 Std. Edition. ?
Currently its configured to:
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
and I want to change the drive letter here.
Thanks in advance.
Cyk
I am trying to find a solution to a thorny problem I have encountered...
I am a newbie in Sql Server 2000, but have quite a bit of experience in databases, both on PC and mainframe.
I am currently writing a program, which needs, among other things, to create Sql Server databases, to be located NOT in the default Mssql2000 directory, but in the user's home directory.
I am using an ADO connection and trying to execute it, as follows:
The text of the relevant part of the program goes like this:
Dim strCreateDatabase As String
Dim MyCn As ADODB.Connection
Set MyCn = New ADODB.Connection
With MyCn
.ConnectionTimeout = 25
.Provider = "sqloledb"
.Properties("Data Source").Value = "MOP"
.Properties("Initial Catalog").Value = ""
.Properties("Integrated Security").Value = "SSPI"
.Open
End With
strCreateDatabase = "Create Database Rimon on (" _
& "Name = Rimon, Filename = '\mopusersMR_DiazsalpmsdataRimon_Data.mdf', " _
& "Size = 20, MaxSize = 100, FileGrowth = 5) " _
& "Log on (Name = 'Rimon', Filename = 'c:usersMR_DiazsalpmsdataRimon_Log.ldf', " _
& "Size = 2, MaxSize = 10, FileGrowth = 1)"
MyCn.Execute strCreateDatabase
Both the name of the Sql Server and the Win2K server is MOP.
All the directories exist, and I have full access to them.
When I try to run this command, I get the following message:
File
'\mopusersMR_DiazsalpmsdataRimon_Data.mdf' is on a network device not supported for database files.
When I omit this location, it works just fine.
If I run it on the server, using another directory, it works just fine.
Do you have any idea what I am doing wrong?
Thanks in advance for any help!
Rimon Rafiah
Hi all,
I have some problem about Reporting Service integrated for SharePoint 2007.
At first, I created 1 user named "User1" under "Domain1". User1 has role "SharePointAdmin" Group and Local Admin Group.
Then I created application pool named "RSAppPool". Its identy was "Domain1User1".
After that, I install Reporting Service and SP2.
Then I config Reporting Service to Integrated Sharepoint Mode below.
Report Server Directory Setting: "ReportServer" in "Default Web Site".
Window Service Identity:
Service Account : "Domain1User1" (Windows Accout)
Web Service Identity:
Report Server: "RSAppPool" (that created above)
Report Manager: Empty
Database Setup:
Database name: Database1 (Server Mode: SharePoint Integrated)
Credential Type : Windows Credentials
Account Name: Domain1User1
After configuration, I reset IIS and test browse to http://servername/ReportServer/ , then there is a Windows Login dialog.
I enter "Domain1User1" and User1's password. But User1 cannot right to access to "ReportServer" virtual directory.
This is error message
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials that you supplied.
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
I'm not sure. Where is I config wrong? ....
Please help me.
Thank you very much.
Hello,
The main problem I am currently facing is that I do not have the following directory to place the DLL file: C:Program FilesMicrosoft SQL Server80ToolsReport Designer. It is the "Report Designer" part that is missing. I tried adding it, but that didn't work.
Any ideas why that is?
Thank you.
-Gumbatman
I've written a custom script to delete backup files from location. But unable to modify now to count the number of files are deleted. How to modify the script...
/* Script to delete older than N days backup from a specific directory */
USE [db_admin]
GO
IF OBJECT_ID('usp_DeleteBackup', 'P') IS NOT NULL
DROP PROC usp_DeleteBackup
GO
[Code] .....
There was a 2008 SSRS service running on server "abc".
I have a .Net UI that uses the wsdl at [URL] ....
They deployed SSRS 2012 service on a new server "xyz".
DNS points abc to xyz. Nslookup looks right shows both xyz and abc alias to the same IP.
when I try to go to [URL] .... it redirects to xyz as expected for the host name but the HTTP GET /ReportServer is appended with GET /Reports/ReportServer which doesn't exist and I get an 404 error.
I have no admin rights to see anything and I have no idea if it was an inplace upgrade or a new server. I assume it's new since the actual server name changed in nslookup. Why would it append the default virtual directory when it makes the hop to server "xyz"?
after selecting the presetted directory .. i clicked ok and they said this," The file name specified is recongnized as a directory name. The file won't be able to be rewritten. Would you like to continue? "
then i clicked " Yes " .. - nothing happened ..
then i clicked " Yes " .. - nothing happened again ..
now i click ok again to close the "restore database" icon .. and they give me this.. i attached a screenshot .. pls have a look ..
i tried clicking "Manage Attachments" somewhere at the bottom of the page to upload .. but ragezone gave me a page telling me that they are sorry for any inconvenience caused .. so i cant attach it .. here is a link .. its kinda small .. but it says:
"Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQLBACKUP'. Device error or device off-line. See SQL Server error log files for more details. RESTORE DATABASE is terminating abnormally."
thank you for helping me .. thanks in advance ..
http://img.photobucket.com/albums/v81/xiaoboy/error.bmp
http://img.photobucket.com/albums/v...oy/untitled.bmp
PLEAS PLEASE HELP ..
Is there anyway,can we find the list of servers by querying at active directory?
View 3 Replies View RelatedHello,
I'm looking to get the drive letter and path for my backups programmatically. I am monitoring my sqlserver boxes remotely and need to get this information to determine if my backups will fit on the backup drive.
I'm looking for either a sql statement or a stored procedure to accomplish this.
For example...the backup script states:
EXECUTE master.dbo.xp_create_subdir N'H:MSSQLBackupmaster'
I need to know how this script gets H:MSSQLBackup
Thanks in advance.
Hi,
I'm using Database Maintenance Plans in Enterprise Manager and I'm trying to backup a database to a different server using a UNC (i.e. \servernameackupdirectory).
I have done this successfully with two SQL Servers but every time I try to set the third SQL Server to backup to a UNC I get this message:
The complete database backup directory '\servernameackupdirectory' is invalid.
The only differences that I can think of is that the server is Win2000 Advanced Server and the SQL Server is Enterprise Edn, where as the two that work are Standard Edn and are on Win2000 Servers (not Advanced).
Does anyone know why I am unable to do this on one SQL Server when I have had no trouble on the other two SQL Servers?
Any help would be greatly appreciated
Thanks,
Troy
I have created a File System task which is contained in a Foreach Loop Container. I have .bak files that are populating a directory from a maintenance backup plan.
There is a point where I need to delete the .bak file's after I've zipped them all up.
How do I set the SourceVariable to read through the directory and pick up just the .bak file's in the directory to delete.
Hello
I have an MSSQL server where I would like to create a couple of databases, create one user pr. DB, and give them db_owner permissions.
Giving a user db_owner permissions allows the user to make a backup of the database, which is a good thing and I would like it to stay that way.
My problem is that I don't know how to restrict the user from saving the backup to any directory or filename that he wants to.
He can not get out of the directories that the user MSSQL is running under has access to. But he can overwrite another users backupfile or placing the file in the MSSQL-programfolder.
The users is using SQL Server authentication.
Can I restrict the backup procedure to save to only one file or in one directory?
What is the best practice regarding backup if you give your users db_owner permissions?
Is there an Admin script that yields the following directories?
Data
Data Root
Log
TempDB
Shared Feature
Backup
I have compile my application into a Smart Device CAB and also including SQLCE CAB file for SQL.
I have users who choose to install SQLCE into Storage Cards instead and causes the application not to function, when asked which destination to install.
I've done some search and found out about "wceload.exe /noaskdest" but I'm using NSIS to compile into a single .exe file, and its calling "CEAppMgr.exe"
How can I force SQLCE to install into its default directory without asking user?
Thanks!
CREATE TABLE XYZ
(
ID int DEFAULT 5000,
NAME VARCHAR(100)
)
I have many tables that have many columns with default values
Is there a way to get a listing of
TAB_NAME, COL_NAME, Data_type, Default_Value
I am new to sql sever management studio express, but a long time query analyzer user. This is a very basic question.
I want to change the default directory in sql server management studio express so that when I go to save a query, it is already pointed to the correct one. Where do I change that?
Thanks,
Nanci
Hi,
I need to read a XML file inside my procedure and put its contents in a variable.
How do I do it?
Is there a dbo procedure to do it?
Cheers,
First of all apologies for posting this again but I posted it in thewrong place the first time.Can anybody help me with the post below?http://groups.google.com/group/SQL-...5ec9f04d978d0deThanks,Paul
View 1 Replies View Related