Hi y'all
I want my written text in an textarea store in a sql database. Which format do i have to choose so sql server understands <br>. Now i use ntext and i get a scrambled <br> (2 cubes)
Thanks in advance.
Grtz
I have several nested sub-total groups that are all coded to "page break at end". I don't know how to tell RS to suppress the page break if one sub-total immediately follows another. The initial HTML output seems to be smart enough to do this suppression on its own, but when I export to PDF, all the page breaks appear. This causes several pages at the end of the report with one line per page. Perhaps, if I could explicitly suppress these page breaks, the PDF would render properly. How can I do this?
View 1 Replies View RelatedI have a report with a single table, single grouping level, single data set and no sub-reports. It has 3 rows for a grouping header and 3 rows per dataset row of detail. The detail rows are initially hidden and can be expanded by clicking on the header +. Its a fairly standard master-detail report.
Regardless of data size, I get NO page breaks in HTML. I have the Interactive size set to 8.5x11, KeepTogether is set to False, and PageBreakAtEnd is set to False. I would like it to break based on the visible grouping rows.
As it is now, everytime you expand any section, it takes forever to reload for a larger recordset.
I know that "HTML renderer and Preview (which are soft page break renderers) will ignore page breaks of conditionally hidden items and their children.", but how do I get this report to page break?? I've seen a lot of posts on this, but none that seem to have an answer.
I am retrieving a field from SQL and displaying that data on a web page.
The data contains a mixture of text and html codes, like this "<b>test</b>".
But rather than displaying the word test in bold, it is displaying the entire sting as text.
How do I get it to treat the HTML as HTML?
The following is sample data I am dealing with.
SELECT * INTO TEMP
FROM
(SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '01-01-2014' AS STARTDATE, '01-31-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '02-01-2014' AS STARTDATE, '02-28-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '03-01-2014' AS STARTDATE, '03-31-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A2000' AS CODE, '04-01-2014' AS STARTDATE, '04-30-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '05-01-2014' AS STARTDATE, '05-31-2014' AS ENDDATE) X
I need to extract the date that the value in CODE column changes to another code for each value of CATEGORY and if there is no change, to record the original CODE value and its startdate for each CATEGORY.
I've let my Vista Ultimate 64-bit installation on a Dell Precision M90 pretty much have its way with automatic update which has worked reasonably well...until now.
I've installed the MS CRM 3.0 laptop version into my Outlook client. Everything was working well until automatic update tried to install Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896) which failed. It also rendered the Online/Offline functionality unusable and, with the installation accomplished while I was Offline, all of my CRM data is sequestered. Uninstalling the CRM client and SQL Express with it while I'm in an Offline condition has some real downsides so I thought I'd try to fix the SP2 issue through this group and then work my way back through the product teams.
The Windows Update installer returns a failure code of 2B22.
I've tried the downloadable SP2 upgrade but only the SQLEXP32.EXE seems to be available through any of the links in the SQL Express pages I've yet visited, not the WOW version.
Thanks,
Richard
I had a report that exported to PDF just fine before installing SP2 and now it is completely messed up. The report consists of a table that has two header rows (the report is basically a calendar). First Header Row is Month - merged across all 7 columns, Second header row is day of week. The next row is a row containing the date and finally the last row contains the actual data that is populated into each day. It is a sub-report in each cell of the row. It used to export fine but after applying SP2 it exports to pdf like this:
1st page is the first header row (Month) - Nothing else on the page
2nd page is the 2nd header row (Day of Week) - Nothing else on this page.
3rd page is the 1st row of actual dates - Nothing else on the page.
4th page is the data that goes to that 1st row of dates on the 3rd page, this page all all following pages are fine and show the row with the date directly above the data row with no page breaks in-between.
There is nothing in any of the controls forcing a page break (remember, it worked fine up until SP2 was applied).
What did the SP break? I am unable to modify my report now so that it exports to PDF correctly. What the heck???
Is it possible to change any line breaks or newlines for a string ...
In a select statement in a store procedure, in this way I can reproduce text in a label on a webpage complete with line breaks ....
I am using a Wysiwig editor, FCKeditor, i my CMS. I try to save the html text from the editor in a SQL Server. But noting get stored in the database.
I think the problem is how the tabel in the datebase is setup.
How shall a tabel look like so it can store html?
I need to store some HTML, well over 8000 chars in SQL Server, what would be the best data type to use?
Thanks
Simon
I have been coding in php for a while now and Im starting to get into asp.net. I use htmlarea in php as my html editor, but I was told that it shouldnt be used when using asp.net and sql server, because of it opens the server up for attack scripts. I dont understand why. Can someone help me out? I would really like to use a html editor with my applications but if it opens the server up for attacks then there is no point on using it.Thanks,Chad
View 1 Replies View RelatedI have html files which want to store in database SQL Server with data type image. How store and receive html file from database SQL Server by ASP.NET.
Data type image is pointer 16 bit to file html. So where will content of files html with their image store ?
Can I help you.
I have a table with a column that has html text. The column with html text is pretty big datatye varchar(max)... I wanted to check if any of you have any function that I can use to Strip out the HTML tags... I saw couple of version online, but it was running too slow..
This is the one I used: [URL] .....
I have the following query that supposes to merge multiple result in a single one and put it into a temporary table:
SELECT DISTINCT [AlphaExtension],
STUFF((SELECT A.[NoteText] + '< BR />' FROM #temp A
WHERE A.[AlphaExtension]=B.[AlphaExtension]
FOR XML PATH('')),1,1,'') As [NoteText]
FROM #temp B
GROUP BY [AlphaExtension], [NoteText]
It is working fine unless by a simple detail. If you look at the second line of the query you will see that I am stuffing together a < BR /> tag (break line) because the contents of the field is going to be spitted directly to the screen and I want that the multiple results be displayed in different lines.
OK, the issue is that it is stuffing & lt ; BR / & gt ; instead < BR /> and therefore the browser is displaying the tag instead to break a line.
I am using FOR XML to generate the HTML and following is my query. I am using td { white-space:nowrap;} for the columns to used no wrap. But i want two columns which need to be wrapped. i have tried lots of options.
SET @tableHTML =
N'<H3><font size="4"> Board - Items </font></H3>' +
N'<table border="1" ><font size="1"> <head><style TYPE="text/css"> td { white-space:nowrap;} </style> ' +
N'<tr bgcolor=#4b6c9e><font size="2" color=white><th> ID</th>
<th> A</th>
<th> B </th>
[Code] ...
From the above code i want G and H columns to be wrapped.
Generate an html-excel file with any table. Does not need Excel to generate , because does not use Excel automation.
http://www.databasejournal.com/scripts/article.php/3300831
I need to export some Database data into a text file. My Query looks like this:
SELECT Category1, Category2, Category3
FROM dbo.tbl1
WHERE Category1 = 'JP-4'
AND Category2> 4;
This works fine to get the data, however there is some html formatting in the table entries such as
`<p>,</p>,
,</br>` etc.
So ideally I need to remove those when exporting the data to the text file. I've tried to do it with a simple replace query but that didn't work. I've also got an issue with line splits and would need to remove the ( ).
The Data format is something like this:
Category1: JP-4
Category2: 4
Category3:<p>Neque porro quisquam est qui dolorem ipsum quia dolor</p> <p>amet, consectetur, adipisci velit</p>
Category4:<p>Neque porro quisquam est qui dolorem ipsum quia dolor</p>
I got it to work like this with the replace function:
SELECT REPLACE(REPLACE("PHOTOGRAPHS",'<p>',''),'</p>','')
FROM dbo.khia_tbl
WHERE Category1= 'JP-4'
AND Category2> 4;
But the issue is that I've got 15 columns in total and that I need to do it for several different tags for each column so
,
</br>,
as well as "" and different spaces so that would be a lot and I thought there must be a better/more efficient way of doing it...
Hi everybody
Is there a way to show HTML tags in a SQL Server Reporting services just like we are used to do in Crystal Reports?
I my case, I use the property Text Interpretation: HTML (right click in parameter field inside report and click edit parameter menu option).
I was wondering if we have something similiar in Reporting services?!
I have someone who is sending me .htm documents, with a table in them, and I was wondering if there is a way to import the data from those tables into a SQL table, probably using an SSIS Package.
View 4 Replies View RelatedI am working on a code that will convert the query output into a html query output. That is the output of the query will be along with html tags so that we can save it as a html file.
The stored procedure that i have used is downloaded from symantec website and is working fine. Below is the code of that stored procedure.
/****** Object: StoredProcedure [dbo].[sp_Table2HTML] Script Date: 12/21/2011 09:04:30 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_Table2HTML] (
@TABLENAME NVARCHAR(500),
@OUTPUT NVARCHAR(MAX) OUTPUT,
[Code] ....
The code works fine and i am able to get the output with html tags. The problem occurs when i insert stylesheet in the code. I tried to enforce styles using a stylesheet for the table returned in my sql code, so that it will look good. below is the stylesheet code that i inserted between <head> and </head> tags.
<style type="text/css">table.gridtable { font-family: verdana,arial,sans-serif; font-size:10px; color:#333333;border-width:1px; border-color: #666666; border-collapse: collapse; } table.gridtable td {border-width: 1px; padding: 8px; border-style: solid; border-color: #666666; background-color: #ffffff;}</style>
If I run the procedure without the style sheet code, it works fine. but when i run the procedure with style sheet code i am getting the below errors.
Msg 105, Level 15, State 1, Line 98
Unclosed quotation mark after the character string '</table></body><'.
Msg 102, Level 15, State 1, Line 98
Incorrect syntax near '</table></body><'.
[Code] .....
I checked the code and i am not able to find what is the mistake. I tried changing the quotation mark but it didn't worked.
When sending an email in HTML format, shouldn't this allow for 2gb of data? Mine is getting truncated after 4000 characters.
@body NVARCHAR(MAX) = NULL,
EXEC msdb.dbo.sp_send_dbmail
@recipients='someone@some.com',
@reply_to='someone'
@from_address='someone@here.com>',
@profile_name = 'profilename',
@body_format = 'HTML',
@body = 'lots of data'
Let me set the stage of my testbed configuration: On Windows XP SP2, my default connection to the Internet is via wireless express card modem using EV-DO via Verizon Wireless. Let's call this connection A. I also have a traditional wireless network connection (802.11g) that is always enabled. Let's call this connection B. Connection A is always connected during normal business hours. Connection B is not and is often searching for a wireless network to connect to when nothing is in range.
Yesterday, connection B was continuously trying to connect to a wireless network not under my control, meaning that the connection was never established and notification messages continually popped up to complain of this fact. Over time, I've learned to ignore these messages and go on doing my daily work without much thought of the possible implications.
Then, things started to get odd. I was running our application, WebWatchBot, to perform some simple tests of various websites and servers, when I started to get messages from the application that database connectivity was lost, which is a message that pops up to inform the user that the connection is forcibly dropped by SQL Server. After a few moments, the connection to the database was re-established and the message went away. Since I was actually working with SQL Server, I thought it was an anomoly, so I continued on. Then, it happened again. And again. Then, I noticed that the "database connectivity lost" message started to coincide with the wireless connection's (connection B) inability to connect with a wireless network.
Why would this be happening? The database and application are on the same exact computer. The connection to the database is via ODBC drivers over tcp/ip, but why would connection B affect this?
Some added information that may prove useful:
Client side:
What is the connection string in you app or DSN? (please specify)
DRIVER=SQL Server;SERVER=HIGHNOTEWEBWATCHBOT;Database=WebWatchBot;UID=sa;PWD=*****
If client fails to connect, what is the client error messages? (please specify)
[Microsoft][ODBC SQL Server Driver]Communication link failure
Is the client remote or local to the SQL server machine? [Remote | Local]
Can you ping your server? [YES | NO ]
In cmd.exe console, type €œping -a <server_name>€?.
Can you telnet to your SQL Server? [YES | NO, please specify the error message ]
In cmd.exe console, type €œtelnet <server name> port, where port can be 135, 445 or sql_server_tcp_port. If your cmd.exe console turns into a complete black screen with a cursor flushing on top left corner, you are connected. Type ctrl+€™[€˜ to bring up telnet prompt and type €œquit€? <enter>.
What is your client database provider? [SNAC | MDAC | ADO.NET1.0 | ADO.NET2.0| other (please specify] Or/And, what is your client application? [SQL Management Studio | SQL Profiler | Visual Studio | Other (please specify): WebWatchBot - Website and Server Monitoring Software
Is your client computer in the same domain as the Server computer? (Same domain | Different domains | WorkGroup)
What protocol the client enabled? [Shared Memory | TCPIP | Named Pipes].
Do you have aliases configured that match the server name portion of your connection string? NO
Do you select force encryption on server and/or client? NO
[2] Server side:
What is the MS SQL version? [ SQL Server 2005 | SQL Sever 2005 ]
What is the SKU of MS SQL? [Enterprise | Standard | Workgroup | Express (or MSDE) | other (please specify)].
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
What is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named Pipes ]. Use SQL Server Configuration Manager to configure it and check ERRORLOG or event log to confirm.
Does the server start successfully? [YES | NO] If not what is the error messages in the SQL server ERRORLOG?
If SQL Server is a named instance, is the SQL browser enabled? [YES | NO]
What is the account that the SQL Server is running under?[Local System | Network Service | Domain Account]
Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? [YES | NO | not applicable]
Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance.[YES | NO | not applicable ]
[2a] Tool Used to Connect
What tool or Application are you using to connect to SQL Server (eg: Visual Studio, SQL Server Management Studio, SQLCmd.exe, OSQL, etc) and especially the version of SQL Server (Express, Workgroup, Standard, Enterprise, Developer)
[3] Platform:
What is the OS version? [Windows XPSP2 | Windows 2003 | Windows 2000 | Windows 98 | others (please specify ) ].
Do you have third party antivirus, anti-spareware software installed? [Symantec | Norton | other (please specify)].
I wanted to know how to insert line breaks while updating the database. Even if I have a number of paragraphs......everything is displayed as one single paragraph. How do i display text in paragraphs ?
Hope someone can help me out. Thanks in advance.
Is there any way to force a matrix or table to display on only one page regardless of how much data there is?
I've tried checking fit this matrix on one page if possible, but apparently it isn't possible for some reason.
Hi,
I want to get this straight, and so far it's not really working the way I want. So, here it is.
I got a table with multiple groups (3 grouping, Manager, Sale Type and Product Type). I want the Manager name being shown on every new page (which I enabled using the "Repeat on new page" property). This works fine so far. Then, I want that every time I have a new "Sale Type", it's on a new page.
This is where it gets hard. I can't get it to work the way I want.
If I set the group 2 with a "Page Break At Start", the first page of my report is blank (which is kind of logical looking at the property name). Same thing goes with "Page Break At End", but the last page is blank.
Is there any way to just have a table grouped without any blank page? Can I dynamicaly disable page breaks if it is the last page / first page of the report?
Here's what I want:
Manager: Some guy
Sale Type - Normal
Product - Mitsubishi Lancer
[some report detail goes here ...]
Page 1/2
** PAGE BREAK **
Manager: Some guy
Sale Type - Rent
Product - Honda Civic
[some report detail goes here ...]
Page 2/2
I have a report with multiple data regions. Each region has its own dataset potentially. I want each region to appear on its own page. Sometime I get a page break where I want it and in other instances within the same report, the breaks are ignored and 2 regions will appear on the same page. I tried imbedding the data regions in rectangles and setting the page break on the rectangle but this doesn't seem to help. There doesn't seem to be any predictable pattern. Any ideas?
View 6 Replies View RelatedHi,
We have an internal mail system, but when the user writes something into the textbox (textarea), he often uses enter to get the message over several lines, our problem is that when the message is saved to the database and retrieved, all the breaks are gone and its all on a single line. In the database its stored inside a field called "message nvarchar(MAX)". How can i preserve the linebreaks?
example, user writes:
Hello,Nice day,to go fishing.
output, after it has been saved and retrieved:
Hello, Nice day, to go fishing.
Patrick
Hello all,
When I changed the SQL sa account password (it was blank) and then tried to connect to SMS remotely via SMS Administrator Console, I get Connection Failed. It seemed to work for a about 20 minutes and then I get "Connection Failed" when I try to run the console remotely. I used the SQL Enterprise Manager to change the sa password and then I used the SMS Administrator Console to set its SQL Server account to sa with the new password under Site Properties. When I switched it to a blank password in SQL and SMS, it started working again.
From the Application Event Log I seem to be getting a lot of these messages (even now - and it's working):
"The description for Event ID ( 1001 ) in Source ( SQLCTR70 ) could not be found. It contains the following insertion string(s): SQL Server not running."
I have also gotten: "The Open Procedure for service "NM" in DLL "nmperf.dll" failed. Performance data for this service will not be available. Status code returned is DWORD 0. "
I don't see any messages from SMS in Event Viewer.
What am I doing wrong?
TIA for you assistance.
I am fairly new to SQL Server. I work for an Internet sofware company building web sites for our customers.
I am trying to insert JavaScript ad tags into a text field in my db. It seems that when the calling web page is rendered the line breaks are removed from the js code and it does not function properly. I've doubled up all of the single quotes and the line breaks appear in the insert statement but do not make it to the front side of my web site.
I'm trying to figure out how to this do with TSQL and preferablythrough joins rather than by using cursors or temp tables. I havemultiple time spans for multiple individuals that I would like torollup together where they don't actually have a gap in coverage.ID StartDate EndDateZ000001 01/01/1996 9/30/1996Z000001 10/01/1996 12/31/1998Z000001 01/01/1999 04/30/1999Z000001 01/01/2000 12/31/2000Z000001 01/01/2001 12/31/2001I would like to be able to "roll these up" in order to reflect theactual time frames so that it would like this:ID StartDate EndDateZ000001 01/01/1996 4/30/1999Z000001 01/01/2000 12/31/20014/30/1999 to 01/01/2000 is, of course, a legitimate break where therewas a date difference of more than one day.Thanks in advance for any ideas.
View 7 Replies View RelatedGreetings all:
I'm having a bit of an issue with a report that I've been working on for the last several days. The report is set up to use a table to print out information grouped by customer, with each customer's information showing up on a new page. This is all fine and well, but it seems that the table is generating page breaks after each row; in other words, since the table has twelve rows (10 group header rows, one details row, and one group footer row), twelve pages get printed, with the data from each row showing up at the top of the page, and nothing else.
The odd thing seems to be this: when I turn off page breaks (initally set to occur at the end of each group), it continues to
insert these breaks, as long as the details row forces the group footer onto another page. This doesn't happen every time the report is generated. Short of getting into the XML that makes up the report definition, I've tried every trick I can think of to get this to stop.
Any suggestions?
Edit: I should also mention that the report previews just fine, but only spits out the 12+ pages when printed or exported.
We have run into a really bizzare problem after upgrading to SQL Server 2005 SP2. We have a bunch of matrix reports that have interactive sort in the upper left hand corner, the sort based on Numeric and Text fields. For Example
=Fields!City.Value
=Sum(Fields!Pax.Value)
Now for whatever reason after upgrading to SP2 and making NO CHANGES to the reports or under data sources, interactive sorts that use the =Sum(....) no longer work but interactive sorts on text values still work.
Any ideas???
I have a sales report which is grouped by customer with a total for each customer and then a new page afterwards for the next customer - this works great however I am trying to put a grand total on (all customers) - this is appearing on a seperate page!!! - on crystal I used to put this field in the summary section, so it would appear on the bottom of the last page, has anyone got any ideas??????
View 2 Replies View Related