HTML Viewer - Toolbar And Parameters Section - No Style Applied In RS2005 Worked In RS2000

Nov 30, 2007

Hi all,


Not sure what's going on here...

I had reports using the HTML Viewer working in RS 2000. The servers were both O/S Windows 2000, SQL Server 2000, IIS 5.0, Reporting Services 2000) The default toolbar and parameters area were formatted and looked fine.

We just migrated to new servers with Windows 2003 Server, SQL Server 2005, IIS 6.0, Reporting Services 2005. I have the reports working fine...except the toolbar and parameters areas look as if there is no formatting at all...as if the style sheet isn't being applied (not even the default one --see below).

Although I don't think this is necessary....I tried the following to resolve the issue....


Updated the RSReportServer.config file.

Driveletter:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config

Checked that the HtmlViewer.css file was in the ...ReportServerStyles folder.


Added the following line between the

<Configuration>.......</Configuration> tags in the RSReportServer.config file.

<HTMLViewerStyleSheet>HtmlViewer</HTMLViewerStyleSheet>














Find

|



Next








Select a format XML file with report data CSV (comma delimited) TIFF file Acrobat (PDF) file Web archive Excel



Export

I can't find anyone else having this issue...any ideas?

Hope someone can help...thanks for looking....
Leslie

View 3 Replies


ADVERTISEMENT

Problem : Can't Customize Style Sheets For HTML Viewer

Mar 15, 2007

Hi ,

Yesterday I Customize Style Sheets for the report manager. Today I tried to customize Style Sheets for HTML Viewer but it doesn't works. I have done all that steps :

- I include the <HTMLViewerStyleSheet> setting into the <Configuration> selection of the rsreportserver.config file and then specify the style sheet I want to use : <HTMLViewerStyleSheet>HtmlViewer2</HTMLViewerStyleSheet>

- My rsreportserver.config file is into the C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer folder.

- The style sheet HtmlViewer2.css is located in the C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServerStyles folder.

I'm using SQL Server 2005.

Can someone Help me ? I have been trying change the style of the toolbar all the day and i start to be desperate !

Thank you.



View 1 Replies View Related

Changes In Paramters In RS2005 Compare To RS2000

Nov 27, 2007

Hi there,

I've got a RS2000 report from Analysis services 2000. This report is working fine but after the upgrade to SQL2K5, i'm having issues with changes to parameters.

Basically i'm passing DateQuarter, CustomersLevel as parameters to the following mdx script. I've tried to change mdx script in RS2005 but no luck yet. I don't much about the parameter level changes in sql2k5. So can anyone suggest what is wrong in the script.




Code Block
RS2000

="with " &
"member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' " &
"set [Rolling Quarters] as '" + Parameters!DateQuarter.value +".lag(4):" + Parameters!DateQuarter.value + "'" &
"SELECT " &
"{[Measures].[Ex Price]} ON COLUMNS , " &
"filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows " &
"FROM Sales " &
"WHERE (" & Parameters!CustomersLevel.Value & ")"

RS2005

with
member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)'
set [Rolling Quarters] as '@DateQuarter' +'.lag(4):' + '@DateQuarter'
SELECT
{[Measures].[Ex Price]} ON COLUMNS ,
filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows
FROM Sales
WHERE STRTOSET(@CustomersLevel)


Thanks in advance,

Vivek

View 4 Replies View Related

Cannot Modify Subscription After The Migration From RS2000 To RS2005

Feb 5, 2007

We successfully migrated our RS2000 to RS2005. But we run into an issue €“ trying to modify an existing subscription that was created on RS2000 (We do not have this problem if the subscription is created on RS2005).

The error message is:

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help.
The specified @name (€˜B3F7CB60-6636-4F67-93CF-B94C052DFD29€™) already exists.

The call stack is:
w3wp!library!d!02/05/2007-14:31:10:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: The specified @name ('B3F7CB60-6636-4F67-93CF-B94C052DFD29') already exists.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.CreateTask(Task task)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.RSService._SetSubscriptionProperties(String subscriptionID, ExtensionSettings extensionSettings, String description, String eventType, String matchData, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.RSService.SetSubscriptionProperties(Guid batchId, String subscriptionID, ExtensionSettings extensionSettings, String description, String eventType, String matchData, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
--- End of inner exception stack trace ---

The error message is raised from the stored procedure sp_verify_job:

-- NOTE: We allow jobs with the same name (since job_id is always unique) but only if
-- they originate from different servers. Thus jobs can flow from an MSX to a TSX
-- without having to worry about naming conflicts.
IF (EXISTS (SELECT *
FROM msdb.dbo.sysjobs
WHERE (name = @name)
AND (originating_server = @originating_server)
AND (job_id <> ISNULL(@job_id, 0x911)))) -- When adding a new job @job_id is NULL
BEGIN
RAISERROR(14261, -1, -1, '@name', 'name')
RETURN(1) -- Failure
END

which is called by another stored procedure sp_add_job.

Question:
Is there anyway that I can workaround this issue? Or is there anyway that I can re-create existing report server subscriptions (I have 300+ subscriptions) programmatically.

Please help.

Bobby Fu

View 2 Replies View Related

Code!func To Get Values In Header Only Works In IDE And Not Deployed Report (also Worked Ok In RS2000)

Jul 18, 2007

I have code



Function GetDealCount(reportItems)

return iif(IsNothing(reportItems!txtDetailCountRows.Value), 0, reportItems!txtDetailCountRows.Value)

End Function

Function GetSumNotionalAmount(reportItems)

return iif(IsNothing(reportItems!txtDealSumNotionalAmount.Value), 0, reportItems!txtDealSumNotionalAmount.Value)

End Function



That I am calling from a textboxes in the page header

= Code.GetDealCount(ReportItems) & " Deal(s)"

also

= Parameters!BaseCurrency.Value + " " + Format(Code.GetSumNotionalAmount(ReportItems),"N2").ToString().Replace(",","'")





When I preview the report in VS.NET I get values showing.

When I deploy the report I just get #Error showing.



Also this report used to work fine in RS2000



Does anyone know the cause of this issue?

View 6 Replies View Related

Reporting Services :: Report Viewer Toolbar Wraps

Dec 23, 2010

Have an ASP page using AJAX - have embedded the latest Microsoft Report Viewer control.  The page access various SSRS reports. The application works fine for most users, but in certain cases, the toolbar wraps and occupies about ten lines - using about half of the visible area.  Users affected by the problem are using IE7 and IE8.  When the toolbar is distorted like this, the buttons (Page, Export, etc) also seem inop. The problem does not seem to be related to the RDL; either all the reports work or none of the reports work.

View 2 Replies View Related

Reporting Services :: Report Viewer Toolbar Expanding

Nov 9, 2011

I have a reportviewer on a master page in a VS2008 ASP.NET application. When I originally created the page, I did not use a master page. When I moved the code to a master page, the Toolbar is 6 line long instead of 1. Each of the individual components of the ReportViewer toolbar is placed on it's own line. (i.e Navagation, Print, Zoom, Etc.) The same control worked correctly on it's own page.

View 2 Replies View Related

How To Send Email Using HTML Style With Picture?

Jun 5, 2008

Hi all!

I have a proc which send email as a text. But now I have to rewrite her to send email as html and embed a picture there.

I use DatabaseMail with sp_send_dbmail.
Does anybody know how to sort out it?

If somebody another way to send email as html with picture don't hesitate, say me.

Thanks in advance!

View 10 Replies View Related

Subscription Contains Invalid Parameters In RS2000

Dec 3, 2007



Occasionally I have this error happening in some of my subscriptions: Subscription contains invalid parameters.

What is actually happenign, one of the parameters has lost the value on which it was previously running without problems. If I open subscription the first parameter, of more, is having no value. The value that is usually lost is first option in drop down list, being for ALL of bellow values. When the error happens it has no value, and that option normally doesn't exists as a parameter value. (If you go creating new subscription that same parameter doesn't have empty values as options to be selected. I usually return ALL and then other individual values.)


For example, one report is having paramteres that returns values from the stored procedure, and the return dataset would be:


Value Label
----------------- -----
'SP1','SP2','SP3' ALL
'SP1' SP1
'SP2' SP2
'SP3' SP3

So, when the error happens, in no reason (no changes to proc, to report design, to subscription,...)
usually those subscriptions that had ALL for this parameter have lost the value, the option is BLANK, and is treated as invalid value, which is correct, as my query also doesn't return BLANK value.
I have to manually go into subscription and set up the value back to ALL and then it's OK, untill next time.

Has anyone experienced this problem?

Does anyone now the fix for this? We thought that hot fix on SP2 may solve this, we applied on dev server but it didn't.

Or maybe someone knows workaround this issue?

Thanking in advance!

Regards,
Elizabeta

View 2 Replies View Related

How To Use Data Mining HTML Tree Viewer

May 26, 2006

Hi!

I try to use Data Mining HTML Tree Viewer, but has some problem. In the Connection property, i can't set a new connection to this property.

Help me!!!

View 1 Replies View Related

Question On Data Mining Html Viewer

Feb 14, 2008

Hi,


Small problem here. I have successfully installed the Data Mining Web Controls in my pc. I can use it to display the result that i want, the problem is the expand image and collapse image did not show out in the column, by the way I can click the blank column to expand or collapse the tree node, it function completely.
How can i display the expand image and Collapse image?

Can anyone help?
Thanks!

best rgds,
xuenly

View 1 Replies View Related

Auto Hide Parameters Toolbar Without Making It Disappear

Jun 5, 2007

Hi,



anyone has any idea how to make the parameters toolbar to be automatically hidden when the report is first being accessed and subsequently to show the parameters when clicked on the arrows ? I have some users who complained that the parameters list is too long, so they wish to hide it first when accessing the report. I know there's this called rc: Parameters=false but this will permanently hide the toolbar which i don't want.

By the way, i am using sql 2000 reporting services

View 1 Replies View Related

Data Mining Html Tree Viewer Authentication

Jul 17, 2007

I am going through the data mining web control viewer tutorial and its going great. I have been able to build and setup the viewer. The problem I am having is when I publish the site out to my web server, it gives me the following error:




Code Snippet

Error: Either the user, <domain><computerName>$, does not have access to the prospectDataMining database, or the database does not exist.



When I debug this on my local machine via Visual Studio 2005, it works GREAT! It is just when I publish the site to the web server.



I have a dedicated SSAS server along w/ a dedicated web server. To test, I published the site to the SSAS server to see if it was a connection issue. I received the same error w/ a different <domain><computerName>$.



I looked at trying to put in the optional connection info for the dataMining html tree viewer properties... but apparently dont know how to do that properly. I also checked the IIS directory security and enabled Integrated security.



What am i doing wrong? ANY help is much appreciated.



Thanks,

Cameron

View 3 Replies View Related

Override Default Button In Properties-&&>Parameters Section

Feb 28, 2007

I wrote a report in Visual Studio with some parameters that I gave default values to in the report definition. I deployed it out to the report server and when I look at the report Properties, Parameters section to see the default values. Instead of seeing all of the default values, I see a bunch of "Override Default" buttons. When you click the buttons, you get a blank text box in which to enter a new value.

Someone before me created a report with default values and the parameters section of that report has text boxes with the default values in them.

Does anyone know how to have the default values show up rather than those "Override Default" buttons?

Thanks.

View 12 Replies View Related

New Title In Thread : Error/bug In ASMX ? - Parameters And Toolbar Property In DevInfo

Apr 20, 2007

Hi all,



I am trying to build a reportviewer so that I could use reporting services (due to company's security policy).



I am getting a VERY weird error here.



Before I get on ahead, here is the scenario.

I had created a rdl that will give a certain report based on two parameters. At the moment, I didn't assign the parameters to any default values since i don't want the report to start running. These two parameters are run based on stored procedures to get the starting date and an ending date.



I had tried to view this report on Report Manager and it works.



I had set the parameters this way. NOTE: ReportingServer is the disgused name of the reportserver I am using for privacy purposes




Code Snippet

Dim rs As New ReportingServer.ReportingService

rs.Credentials = System.Net.CredentialCache.DefaultCredentials

'Render arguments

Dim results() As Byte

Dim format As String = "HTML4.0"

Dim historyID As String = Nothing

'PDF Rendering extensions don't have any useful DeviceInfo settings

'the toolbar shown below only affects HTML rendering

Dim devInfo As String = "<DeviceInfo><HTMLFragment>True</HTMLFragment><JavaScript>True</JavaScript><Toolbar>True</Toolbar><Parameters>True</Parameters></DeviceInfo>"

Dim credentials() As ReportingServer.DataSourceCredentials = New ReportingServer.DataSourceCredentials() {}

Dim showHideToggle As String = ""

Dim encoding As String = ""

Dim mimeType As String = ""

Dim warnings() As ReportingServer.Warning = New ReportingServer.Warning(0) {}

Dim reportHistoryParameters() As ReportingServer.ParameterValue = New ReportingServer.ParameterValue() {}

Dim streamIDs() As String = Nothing

Dim sh As ReportingServer.SessionHeader = New ReportingServer.SessionHeader

rs.SessionHeaderValue = sh





But when I started building this reportviewer.aspx, it gives me this error on the following line:-






Code Snippet

results = rs.Render(ReportPath, format, historyID, devInfo, Parameters, credentials, _

showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)









with the error



{"This report requires a default or user-defined value for the report parameter 'start_date'. To run or subscribe to this report, you must provide a parameter value. --> This report requires a default or user-defined value for the report parameter 'start_date'. To run or subscribe to this report, you must provide a parameter value. --> This report requires a default or user-defined value for the report parameter 'start_date'. To run or subscribe to this report, you must provide a parameter value."}



this is occuring on the line where it needs to render the report.



As simple as it is, i tried the following:-

NOTE: some variables has been changed to protect some identity.






Code Snippet

Dim ReportRenderer As New RenderSQLReports

Dim Parameters As int.rrd.sqlreporting_test.ParameterValue() = Nothing



ReportRenderer.RenderReport(Parameters, "/Folder/reportname", "pdffilename.pdf")









What I don't get is that i made sure that it doesn't have any default values.



So I went into this scenario and tried teh following:-






Code Snippet

Dim ReportRenderer As New RenderSQLReports

Dim Parameters() As Reportingservices.ParameterValue = New Reportingservices.ParameterValue(1) {}


Parameters(0) = New Reportingservices.ParameterValue

Parameters(0).Label = "start_date"

Parameters(0).Name = "start_date"

Parameters(0).Value = "10/1/1999 12:00:00 AM"

Parameters(1) = New Reportingservices.ParameterValue

Parameters(1).Label = "end_date"

Parameters(1).Name = "end_date"

Parameters(1).Value = "11/1/1999 12:00:00 AM"



ReportRenderer.RenderReport(Parameters, "/Folder/reportname", "pdffilename.pdf")







And this is what happens. It blows up on this line again. with this error.


Code Snippet

results = rs.Render(ReportPath, format, historyID, devInfo, Parameters, credentials, _

showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)

With the errors



{"Default value or value provided for the report parameter 'start_date' is not a valid value. --> Default value or value provided for the report parameter 'start_date' is not a valid value. --> Default value or value provided for the report parameter 'start_date' is not a valid value."}



This is probably occuring because the date I had provided is not found in the list of dates. I really don't want to default a date at the moment, to allow the user to select a date.



So I finally gave it a date...... a valid date.






Code Snippet

Dim ReportRenderer As New RenderSQLReports

Dim Parameters() As Reportingservices.ParameterValue = New Reportingservices.ParameterValue(1) {}


Parameters(0) = New Reportingservices.ParameterValue

Parameters(0).Label = "start_date"

Parameters(0).Name = "start_date"

Parameters(0).Value = "10/1/2004 12:00:00 AM"

Parameters(1) = New Reportingservices.ParameterValue

Parameters(1).Label = "end_date"

Parameters(1).Name = "end_date"

Parameters(1).Value = "11/1/2004 12:00:00 AM"



ReportRenderer.RenderReport(Parameters, "/Folder/reportname", "pdffilename.pdf")



LO and behold, it works BUT . now i get this error in the aspx code.

Runtime error has occured.


Microsoft JScript runtime error: 'Report' is undefined

on this weird line:- (that was generated automatically)



</script><script language="javascript" type="text/javascript" src="?rs:Command=Get&amp;rc:GetImage=8.00.1038.00Report.js">

</script><script language="javascript" type="text/javascript">

<!--

function OnLoadReport()

{

var pageHits = null;

var rep = new Report(1, 16, pageHits, false, docMapIds); <-where error is occuring.

if (parent != self) parent.OnLoadReport(rep);

}

//-->

</script>





It did show the report, but I don't understand why it is still getting an error here. Moreover, I didn't even get the HTMLViewer too even when I had assigned the devinfo....



Really need some help here, as this is quite urgent.... I am at a loss at this, and maybe that there is an option that I am not seeing or something I am missing. please help .

Bernard-So close yet so far, How cruel are the software bugs-

View 4 Replies View Related

How To Customize SSRS 2000 HTML Viewer Without Affecting Other Folders Or Clients?

Apr 17, 2007

Hi all,



Got a good question to ask. At the moment, I do not have any control over the reporting server webserver. This is due to the company's policy. The webhosting is controled by antoher department.



Anyways, the question is the following:- Is there a way to customize the config file for the htmlviewer (css style sheet, rendering and others) for a specific client without affecting the rest ?



There are about 20 clients on a server, and I am responsible for one of them. I had customized my config file to render or allow only two formats for this particular client. Since I don't have any control over the websever, I just can't replace the config file without affecting the others. How do i do this ? I just want th config file to ONLY affect a certain client's HTMLViewer and not the others. I tried to do some research on this, but came up empty handed.



Thanks !



Bernard

View 4 Replies View Related

Instant Html Report With Parameters

May 24, 2007

hi,

I'm reading some papers about reporting services; all is quite new for me so I wonder if the following is possible:

If I create a template for a report with two parameters (this must be possible according to my papers)... then, is it possible that my agents browse to an URL like: http://server/reportTemplate?param1='abc'&param2='cde'
that they get an instant html report in their browser, based upon the actual data of that moment, and the parameters provided in the url.

is this possible?


thx

View 1 Replies View Related

How To Avoid Caching Parameters In Report Viewer ?

Aug 23, 2007


Hello all,
I have a peculiar problem. We are using VS-2005,SSRS-2005,SqlServer-2005. Our front end is Windows forms and we are communicating with SSRS through WebServices protocol. Through WebServices we are generating dynamic parameters based on the report and were able to show them on the Win form screen.

The previously entered values are being retained even though we delete the existing one. I am unable to figure out the cause of it.

Please help......

--Deepak

View 4 Replies View Related

Setting Default Parameters Via The Reporting Services Viewer

Oct 23, 2007

HI,
I am trying to set the following default parameter : datepart("m",now()). The parameter is an integer

If I do this through visual studio 2005 it works just fine.
However I need to change this for a linked report and when I do the same thing in the viewer (using the "Overide Default" key) I get the following error
"The parameter Month contains a value that is not valid. This parameter takes an integer as a value"
Can anyone suggest a way to get arround this ?

View 2 Replies View Related

Generic Way To Style Reports (CSS Style)

Jun 9, 2006

I want to make a CSS Style solution for my reports. I have few ideas related to this, changing the report properties on the fly, but I am not sure for which I should go for.

- We know that we can put expression on reports almost everywhere, and can also call custom code for setting up those expressions. i.e.

Public Shared Function GetValue(ByVal Key As String) As String

Dim myDataReader As SqlDataReader
Dim mySqlConnection As SqlConnection
Dim mySqlCommand As SqlCommand

mySqlConnection = New SqlConnection("server=localhost;Trusted_Connection=yes;database=tempMIQB")
mySqlCommand = New SqlCommand("SELECT * FROM [Properties] Where PropertyName='" & Key & "'", mySqlConnection)
mySqlConnection.Open()
myDataReader = mySqlCommand.ExecuteReader(CommandBehavior.CloseConnection)

If myDataReader.Read() Then
GetValue = myDataReader.Item("PropertyValue").ToString
Else
GetValue = "None"
End If


End Function

and in textbox or any where I can say =Code.GetValue("BGColor") or from .NET dll.

For going further on with this idea I can create an .NET dll and get the list from database or XML file. (Please give suggestions for performance/scalability issue.)

- second idea is to write a custom application (script) which can go through all the reports and change the color and fonts and every thing.

- third is to use parameters and use Array.IndexOf method to search for the value, but in this case i need to add dataset to all reports and, I think we cannot access report properties i.e. Parameters from custom code, just to make a generic function to access parameter value.

View 1 Replies View Related

Error The Parameter Is Missing A Value: Problem With Parameters ('Ver 1.1 Part 1') Passing To Report Viewer Control

Jan 25, 2008



Hello,

I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc.
But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error "
The parameter is missing a value"



Could anyone please help on this.

Thanks,
Chandroday

View 1 Replies View Related

How Can I Take This Example Flat File And Parse Out Each Section To A New Flat File? Each Section Starts With HD (header Row)

Mar 13, 2006

How can I take this example Flat file and parse out each section to a new flat file?  Each section starts with HD (header row)

http://www.webfound.net/flat_file_example.txt

e.g. an example output file based on above (cutting out the first section) would be:

http://www.webfound.net/flatfile_output.txt

Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed.  I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible?  The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:

1) output each group (broken by each header row) into it's own txt file

2) use a field in  the  header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt.  I want to grab the text 'AR10' and use that as part of the filename that I create

Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?

View 1 Replies View Related

How To Pass Parameters From Report Viewer To Report Server

Mar 28, 2008

Hi,

I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.


Thanks,

View 9 Replies View Related

Display HTML Codes As HTML And Not Text

Jan 15, 2008

I am retrieving a field from SQL and displaying that data on a web page.
The data contains a mixture of text and html codes, like this "<b>test</b>".
But rather than displaying the word test in bold, it is displaying the entire sting as text.
How do I get it to treat the HTML as HTML?

View 6 Replies View Related

Installing RS2000

Jan 25, 2006

We want to start working with Reporting Services on a Windows Server 2003 (SP1) server that has SQL2000 (SP3) Standard Edition. I thought I could load RS from the CD but it does not appear to be on there. I seem to remember that Microsoft added RS to SQL2000 in the last year or so. Can I download a copy of it, or how do I go about getting a copy and how to I show my boss that it is a legit copy? Thanks...

View 4 Replies View Related

Win2003 SP2 Fix Causes Problems On RS2000

Aug 15, 2007

We just applied SP2 to our Windows 2003 server & it has had an odd impact RS2000.
When trying to change the data source of a report to a shared data source, the browse button when clicked does not take you to the page to enable selection! It does nothing!

Does anyone have any ideas on what's going on there?

View 1 Replies View Related

Domain Migration (RS2000)

Oct 12, 2007

Here's the situation we're facing. Our organization is going to consolidate into a single domain. The plan of action is to disband the old domain, and create an all new domain. Most of our servers will also be renamed in the process.

We've got something of a two-server setup, with one machine handling SQL Server, and the other hosting various intranet sites, including Reporting Services 2000.

SQL Server itself shouldn't be a huge problem to migrate - the machine only has about half a dozen Windows logins set up. In my experience, though, Reporting Services is a much more fragile animal. Just getting it up and running on Win2003 SP1 and coexisting with ASP.NET 2.0 was enough of a stunt already. What will I have to watch out for to make sure this doesn't completely hose our installation? Would it be too optimistic for me to hope that I'll just have to reconcile any domain service accounts, change the connection string for the report server catalog database, and be done with it?

View 1 Replies View Related

Very Nice; That Worked.

Sep 29, 2006

Very nice; that worked.

It seems like a lot of code for each date field, but we are up and running now.

View 1 Replies View Related

Now If A Update Worked In A SP

Jul 23, 2005

HiI've a SP in MSDE that will update a table. How could I know if itworked to return a value to the SP caller ?Thanks in advanceJ

View 1 Replies View Related

Problem With RS2000 Export To Excel

Mar 5, 2007

We're using RS2000 and there are some reports that are having problems exporting to Excel after having been rendered.

The reports have no more than 30,000 rows, but are about 150 columns wide. The reports run (execute and redner) very quickly in Reporting Services, but when exporting, the "blank rendering window" (the one with the URL: "http://ServerName.Reportserver?ReportName&rs%3aCommand=Render&rs%3AFormat=EXCEL) is open for about half an hour, and the w3wp process pummels our 8 proc box (CPU between 50 and 90% for that time) and memory goes past 1.5 GIG (of the total 8 GIG) usage.

Sometimes we'll get a message asking the user to log in after about 10-15 minutes, after which it fails, other times it makes it to the dialog box asking if you want to open or save the spreadsheet. If it makes it to this dialog, it's OK, if not, it fails on the export. The resulting spreadsheets are only between 25 - 32 MG, not very big at all.

Are there any settings we can tweak to speed this up, or at the very least, be sure it always makes it to the Open/Save dialog?



Thanks in advance.



View 3 Replies View Related

NEW + MODIFIED Subscriptions Not Running In RS2000

Sep 19, 2007



Hi There
I've not managed to find an answer already about this, and so I know you guys will be able to help me out becuase your great!!!

Our Reporting Services portal is acting strangely, all the existing reports we have subscriptions for are running fine.

However should we change the list of contacts or the dates or times of any exisiting schedule this stops our reports from being delivered, infact the report run time will pass, but the report will not run and even in the Subscriptions table of RS the last status will only show "New Subscription".

So whatever is happening, it is not triggering the correct work flow. (Thats my thought at least)
We examined SQL Agent logs to uncover that the Login used to run the reports was running the existing reports without issue, however the new subscriptions would give the following error:

[298] SQLServer Error: 8198, Could not obtain information about Windows NT group/user 'SERVERNAMEREPORTING_ACCOUNT'. [SQLSTATE 42000] (ConnIsLoginSysAdmin)


The server name and account have been changed to protect the gullible and innocent.


I do hope someone else can provide some insight into my issues

Thanks in advance

Tristan

View 1 Replies View Related

Does Anyone Recall How We Used To Get Vs2003 To Allow Rs2000 Design?

Mar 14, 2008

we're all pretty fluent with 2005 products, but must enhance our legacy 2000 RS product, and prefer to use vs2003. Does anyone recall how we used to get vs2003 to allow RS2000 design. We dont believe we saw such an option in installation of vs2003, but since installing the db preceded that, arent sure if we would have been given such an option had vs2003 been installed prior to the 2000 db.

View 1 Replies View Related

Forced Output Format - RS2000

Mar 14, 2007

A few details first:

The report server is remote to the development server (VS 2003).

The web application that will be calling it is ASP.NET 2.0 and developed in VS 2005.

I have a couple of questions:

a: Can I link to the report from the web application using a basic Hyperlink control rather than using a ReportViewer control?

b: How can I force which format it opens in? Say I want it to be rendered as a PDF in one instance but at an XSL document in another.

Many thanks and kindest regards,

TwoForTea

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved