Hello to all,
On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way...
Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Hi Everyone,
I have developed a SQL script that runs daily using the SQLCMD command line utility. The script executes about 15 INSERT INTO statements. The problem is that when one of the SQL statements contains an error, the script stops running, therefore not running the SQL statements below it. How can I avoid this? I would like the script to continue to the next statement. Also, how can I save the error messages if any errors has occurred?
Thank You
-Sam
Hai
I wrote a sp in sqlserver2000 and sp consists of 1 input parameter of type datetime and everything is working fine but if i pass the argument of invalid date format it is giving error.Is there any way to handle errors in sps and even if i give invalid format it should not raise errors.Pls reply as early as possible.
Thanks
Aruna
Hello,
I want the server to check validation rules and not the user application
is this possible???
I want to send my own messages to the user and dont want the user to see the
servers messages.
Thank you in advance
Eran
HI!!
I've been working for an year or so with DTS, but it still makes me mad with it's cryptic error messages!!!!
"The task reported failure on execution" is one of the "funny" error messages I retrieve. I've tried with the log option, but error messages stored there are as cryptic as the one shown on the screen!!!!!
Timothy Peterson in "MS SQL Server 2000 DTS" provides code chunks that can be used to "decode" numerical error messages into something readable and understandable, but I really don't realize where should I put that code :( It seems to work only if you are executing packages via Visual Basic, and not using the MMC
That's it, I really do need help with this!!!!!!! I beleive that there's someone out there that had faced and solved this problem !
Thanks in advance
lorena
When I have an alternet Data Flow in an event handler, caused by a record failing to be inserted due to a unique-key constraint violation, does this increment the number of errors, counting towards the MaximumErrorCount? How can I NOT count it as an error?
The thing is, I need to insert 300,000+ records each day, and some may be duplicates from data already in the table. So I set a unique key constraint on the table, and if during the load, it fails, it will trigger an alernate data flow to load the error records into another table. But if someone tries to load a file that already has been loaded, for example, all the records would be duplicates, which would be equivelant to 300,000+ errors, and I don't want to keep setting the MaximumErrorCount property higher and higher.
Is there any way to treat the error as "being handled" in the dataflow, so therefore doesn't treat it as an error? Or conversely, can I set the MaximumErrorCount property to 0 or -1 to accept all errors, no matter how many?
We are displaying the report in our reporting application but we do not want to display errors from SSRS to the user. We want to handle the errors and display a user friendly message.
How can that be done?. We are making URL access to the report server.
Thanks.
Hi
I am trying to use this painful new SSIS process. I basically need to use a lookup task to check to see whether a record exists or not. If not, then I need to insert the record. However, because this is treated as an error situation (which is stupid in itself), I get a problem when the number of records not found reach the MaximumErrorCount, and the rest of the package fails. Is there any other method of doing this type of thing, without simply increasing the MaximumErrorCounty to some ludicrous value. I could do this type of thing very very very easily when using DTS packages using the Data Driven Task, it seems so stupid that I can't perform the same kind of task using SSIS.
Any help would be appreciated
Thanks
Darrell
In almost all scenarios, where there is an error, it also raises 3-4 other errors like these ones below.
I'm 100% sure, the 1st one is the actual error resulting in package failure and the errors 2-5 is the result of error #1. So what ever code I have in the error handler section of the package gets executed 5 times.
How do I handle this? Can do I hard coding for the error numbers?
1. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01858: a non-numeric character was found where a numeric was expected ".
2. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
3. Thread "SourceThread0" has exited with error code 0xC0047038.
4. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
5. Thread "WorkThread0" has exited with error code 0xC0047039.
Thanks
With the new features of SQL Server 2005 for error handling (TRY...CATCH blocks), how are you propagating errors back to the caller? For example, lets say we have 3 stored procedures:
dbo.usp_UpdateSomeTable1
dbo.usp_UpdateSomeTable2
dbo.usp_UpdateSomeTable3
Let say some application calls dbo.usp_UpdateSomeTable1, in turn dbo.usp_UpdateSomeTable1 calls dbo.usp_UpdateSomeTable2 and in turn dbo.usp_UpdateSomeTable2 calls dbo.usp_UpdateSomeTable3.
Now if dbo.usp_UpdateSomeTable3 generates an error, how do you handle propagating this back to the caller?
I envision encapsulating the contents of each procedure in a TRY...CATCH block like so:
BEGIN TRY
...do some stuff
END TRY
BEGIN CATCH
...handle errors - whether generated from our own RAISERROR statements or by the database engine.
END CATCH
Now my problem is I would like to capture all the error variables and toss them back to the caller and keep sending that information up the stack. So far my attempts have been pretty unreadable and end up being just a cluster of text.
Hi All,
Well, tha case here is simply that i have a (Suppliers.csv) as an Input.
When taking that file, I do some validation on it's rows (Data type validations, Mandatory Fielda validations..etc).
When some rows to do not meet the requirments i put in these validations , it is supposed to be directed to an (Errors) Table in my SQL DB.
I want to include the order of the invalid row in the input File (The row which did not pass from the pre-mentioned validations) within the (Errors) Table when i direct the invalid rows to it.
Any ideas ?
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
Hi,
I am executing script like this. How to check for the errors if "master..xp_cmdshell @bcpCommand" fails. Is there any way to verify that BCP is completed successfully
DECLARE @FileName varchar(50),
@bcpCommand varchar(2000)
SET @FileName = 'E:TestBCPOut.txt'
SET @bcpCommand = 'bcp "SELECT * FROM pubs1..authors ORDER BY au_lname" queryout "'
SET @bcpCommand = @bcpCommand + @FileName + '" -c -U -P'
EXEC master..xp_cmdshell @bcpCommand
Thanks in Advance,
it gives error while calling a sql stored procedure as "INPUT STRING WAS NOT IN A CORRECT FORMAT". I am providing the code here.public void get_issid(string cse_email, string tech_email, string subject, string issue_details, string response, string solv_date, out int issid)
{
// Establish ConnectionSqlConnection oConnection = GetConnection();
// build the commandSqlCommand oCommand = new SqlCommand("get_issid", oConnection);
oCommand.CommandType = CommandType.StoredProcedure;
// ParametersSqlParameter paracse_email = new SqlParameter("@cse_email", SqlDbType.VarChar, 50);
paracse_email.Value =cse_email;
oCommand.Parameters.Add(paracse_email);
SqlParameter paratech_email = new SqlParameter("@tech_email", SqlDbType.VarChar,50);
paratech_email.Value = cse_email;
oCommand.Parameters.Add(paratech_email);SqlParameter parasubject = new SqlParameter("@subject", SqlDbType.VarChar, 50);
parasubject.Value = subject;
oCommand.Parameters.Add(parasubject);SqlParameter paraissue_details = new SqlParameter("@issue_details", SqlDbType.VarChar, 500);
paraissue_details.Value = issue_details;
oCommand.Parameters.Add(paraissue_details);SqlParameter pararesponse = new SqlParameter("@response", SqlDbType.VarChar, 500);
pararesponse.Value = response;
oCommand.Parameters.Add(pararesponse);SqlParameter parasolv_date = new SqlParameter("@solv_date", SqlDbType.DateTime);
parasolv_date.Value = solv_date;
oCommand.Parameters.Add(parasolv_date);SqlParameter paraissid = new SqlParameter("@issid", SqlDbType.Int);paraissid.Direction = ParameterDirection.Output;
oCommand.Parameters.Add(paraissid);
try
{
oConnection.Open();
oCommand.ExecuteNonQuery();issid = int.Parse(paraissid.Value.ToString());
}catch (Exception oException)
{throw oException;
}
finally
{
oConnection.Close();
}
}
the stored procedure is:
create proc [dbo].[get_issid](@tech_email varchar(50), @cse_email varchar(50),@subject varchar(50),@issue_details varchar(500),@response varchar(500),@solv_date datetime, @issid int output)
as
select @issid=tech_response.issue_id from tech_response,issue_details where tech_response.tech_email=@tech_email and tech_response.cse_email=@cse_email and tech_response.subject=@subject and tech_response.issue_details=@issue_details and response=@response and solv_date=@solv_date and tech_response.issue_id=issue_details.issue_id
requested to help in this
I'm unsure how to handle an SQL Exception correctly when the database is unavailable/offline.
I have my aspx file with the C# code-behind, but all of the SQL stuff is done in a separate code file in the App_Code directory.E.g.
CODE-BEHINDDatabaseModifier.deleteUser(username);
DATABASEMODIFIER.cspublic static void deleteUser(string username){ SqlConnection conn = SqlLogin.SqlConnect; SqlCommand command = new SqlCommand("DELETE FROM <table> WHERE Username = '" + username + "'", conn); conn.Open() command.ExecuteNonQuery(); conn.Close()}
Now, that code works perfectly, however if the database I'm connecting to is offline, an SQLException is thrown and because the SQL is handled in my DatabaseModifier class, I'm not sure how to handle it correctly.If I use a Try/Catch block in my code-behind, it doesn't get thrown because the error occurs in my DatabaseModifier class. If I use a Try/Catch block in my DatabaseModifier class, what can I put in the catch block that will inform the user of the database being offline and/or how can I perform a url redirection?
Any help is greatly appreciated.
Hi there,
Can anyone help me in catching @@error value.
I have a stored procedure which return @@error value, I need to read that in my dataaccesslayer and act according to it.
how do I catch the return value from stored procedure in my dataaccesslayer.
if I am not wrong @@error return a bool value
Thanks in advance.
dear friends i am writng a store procedure to insert into a two table .table 1 data inserted but when i inserting into a table2 it have some error at that time table 1 data also want to delete.give suggestions
View 3 Replies View RelatedHi All, Please help me out how to implement the locking in below scenarioReq - There are two tables Table1 & Table2 If I will insert in table1 then related data fields will be auto updated in table2 , similarly based on the data in table2 table1 data needs to be updated. Now the sync of table1 & table2 is working fine.My prob is we are handling the updation/insertion from the UI screens . Two separate screen for each table. When we have multiple user accessing the screens say - User1 updates table1 and User2 updates table2 then we need to implement the locking so that at one time one screen will allow updation in the table1 and hence table2.The other screen shouldnt allow updation in table2 and hence in table1.This is very common locking functionality ...but am not getting any way to implement it , Please advise.Srain.
View 1 Replies View RelatedI am writing a stored procedure that loads transaction logs to a database and I am having trouble trapping meaningful error messages. When ever the load fails, it gives me two error messages, the first one is meaningful and the second one just states that the load ended abnormally. Unforunately, when I capture the error using @@error after the load statement, it is the second error message that I am getting.
Is there anyway to trap the first error message as well?
Thanks
Angela
I currently have defined a source server, a transformation, and a destination server using DTS. How and where do I create an error routine that would capture any and all errors that would occur. This would include connection error, transformation errors etc. I know the errors can be written out to a text file but I would like them written to a table on my destination server.
The DTS package will be called from an external program using the xp_cmdshell extended stored procedure. We are using it this way as a flag so if one transformation fails it will return a 1. If all are successful it will return a O. These will be our flags to check the errors table in the destination server.
Could someone tell me where this code is to go and what the code will look like. Samples would be the most help.
Thanks
Tom
is there any way to do sometype of Error handling with in a Stored Proc? Example, If I have a deadlock, can I trap that error and execute other sql code or will always simply kill the stored proc?
View 1 Replies View RelatedI have a composite unique key on the audit_hub table that includes TimeStamp, UID, Type, Mailbox all as part of the unique key.
I’m trying to do inserts, and know that in some cases I will violate unique index.
I’m using stored procedure, and want to handle the error gracefully there – just move on.
Reading from text-based log files via .vbs and get back the nasty popup window.
Looks like I have it right but obviously I don’t considering how it’s (not) working.
I thought error handling would be the simplest way to avoid dupe records. Might be necessary to run the same log in more than once, and only want to add the new records since the last insert session.
Here’s what I have. It obviously simply halts and complains immediately after the insert attempt.
ALTER procedure eml_HubInsert
@TimeStamp bigint
,@UID varchar(255)
,@Type varchar(255)
,@MailBox varchar(255)
,@ServerID varchar(50)
as
insert into audit_hub (TimeStamp,UID,Type,Mailbox,ServerID)
values (@TimeStamp,@UID,@Type,@MailBox,@ServerID)
if @@ERROR = 2601
begin
return 0
end
Hallo... and sorry about my english
1 question:
What Error-Handling msut i mplement in a trigger, who is updating permanently two tables
in a database (with the follow commands: insert, delete and update) ???
thank you !
Hi,
Im Nithyananda working on a project with SQL server 6.0
Im having a stored procedure which inserts into a table .
If I violate the primary key constraint on the table , I get a 2627 error.
I would like to replace this error with my own.Could u tell me how to do it?
Im an ORACLE guy and relatively new to SQL server.
Is it possible for me to propogate the same error message to any front end?
In my case ,Im using VC++ as front end.
Could someone also tell me the way of calling a SQL stored procedure from
VC++?
Regards
Nithyananda
I have some stored procedures that insert information from a third party plugin that hooks into our database (so I can't do any client side validiation). The problem I am encountering is that some of the fields I use need to be in DateTime format. In order for SQL SERVER 2000 to be able to insert this field, the Date has to be in the correct syntax or an error is thrown.
Is there any way to do something like this in SQL SERVER 2000
Code:
DELCARE @SomeDate DateTime
Try
Set @SomeDate = CONVERT(DateTime, Parameter1, 101)
Catch
return custom error describing what field is formatted
wrong and exit stored procedure
END
I am running some bcp copies through a Sql job. I am copying 35 tables in individual steps. However, sometimes the bcp step fails to copy the data, and I want the step to fail if the data is not copied properly. Is that possible? If so, how? Any help is greatly appreciated.
View 2 Replies View RelatedI have this stored procedure that I need to add error handling to. How would I do that??
REATE PROCEDURE November2000
AS
SELECT TM#, LASTNAME, FIRSTNAME, FINALSUITDONE
FROM dbo.EmployeeGamingLicense
WHERE (FINALSUITDONE BETWEEN CONVERT(DATETIME,
'2000-11-01 00:00:00', 102) AND CONVERT(DATETIME,
'2000-11-30 00:00:00', 102))
GO
Hey Gang, got one for you.
error message:
Server: Msg 137, Level 15, State 2, Line 19
Must declare the variable '@EFFECTIVE_DATE'.
Code:
SELECTLOG_PK,
LOG_REQUESTOR,
LOG_REQ_PHONE,
LOG_CHAR_60_1,
LOG_CHAR_30_4,
LOG_CN_FK,
LOG_CREATE_DATE,
LOG_REQUEST,
(LOG_STATUS),
(LOG_TYPE),
LOG_FU_FK,
LOG_FB_PK,
LOG_LT_FK,
LOG_CREATE_DATE
FROMf_Requests
WHERELOG_RQ_FK IS NOT NULL AND
LOG_LT_FK <> 10174 AND
LOG_RC_CODE = S
AND (LOG_MOD_DATE > @EFFECTIVE_DATE OR
LOG_CREATE_DATE > @EFFECTIVE_DATE)
ppl,
i wrote this sql, seems v.straightforward to me.
It works first time round, sets the foreigh key, but second time round should error out to the handler - but it just reports the errors to the message out and dosn't seem to fire the errhandler.
Its gotta be a simple mistake - perhaps you could show me.
DECLARE @ErrorMsg int
BEGIN TRANSACTION
ALTER TABLE TPH_GlobalProductHierarchy
ADD CONSTRAINT SalesSubGrp_fk FOREIGN KEY (SalesSubGroupingID)
REFERENCES TPH_SalesSubGrouping (ID)
SET @ErrorMsg =@@ERROR
IF @ErrorMsg <>0 GOTO ErrorHandler
PRINT 'Success'
COMMIT TRANSACTION
ErrorHandler:
IF @ErrorMsg <> 0
BEGIN
PRINT 'Rollback'
ROLLBACK TRANSACTION
END