Handling Updates In SSIS With OLEDB Command Transformation
Apr 26, 2008
Hello My package flow is like This
OLEDB SOURCE --> LOOK UP TRANSFORMATION
|
lookup output / error output(for new Inserts)
(updated records) /
/
DERIVED COLUMN DERIVED COLUMN
TRANSFORMATION1 TRANSFORMATION1
| |
v v
OLEDB COMMAND TRANSFORMATION OLEDB DESTINATION (inserting new records to
(Updating records in destinationTable)
destination)
in this senario new records r insrted properly
but though package runs without error records not get updated in Destination.
In OLEDB COMMAND my query is like below,
UPDATE TARGET_SCD_1 SET
CURRENTSTATUS = ?,
CURRENTSTATUSEFFECTIVEDATE=?,
PROPOSALEFFECTIVEDATE=?,
UNDERWRITINGEFFECTIVEDATE=?,
TECHLAPSEEFFECTIVEDATE=?,
WITHDRAWNEFFECTIVEDATE=?,
DCSEFFECTIVEDATE=?,
PREPOSIONEFFECTIVEDATE=?,
INFOURCEEFFECTIVEDATE=?,
LAPSEEFFECTIVEDATE=?,
SURRENDEREFFECTIVEDATE=?,
FLCEFFECTIVEDATE=?,
CANCELLEDEFFECTIVEDATE=?,
DCIEFFECTIVEDATE=?,
REC_UPT_DT=?
WHERE O__NUM = ?
In advanced editor of OLE DB I hv created additional 16 paramater columns though i assign datatype as numeric to tht columns when i press refresh automatically it changes to DT_STR.
My destination table columns r numeric .
I though due to this datatype mismatch the error came So i change the datatype of dest to varchar to make compatible with OLEDB Comand Transformation. THN also no Use NO UPDATES
package is running without error but records not get updated.
if change the flow like below
OLEDB SOURCE --> LOOK UP TRANSFORMATION
|
lookup output / error output(for new Inserts)
(updated records) /
/
DERIVED COLUMN DERIVED COLUMN
TRANSFORMATION1 TRANSFORMATION1
| |
v v
OLEDB COMMANDTRANSFORMATION /
(Updating records in /
destinationTable) /
/
/
UNION ALL TRANSFORMATION
|
v
OLEDB DESTINATION
In This Case The updated record get inserted in the target as wel as the old remains as it is means m getting one additional record.
kindly help me to figure out the bug
M frusted with this issue please.............
View 1 Replies
ADVERTISEMENT
Mar 2, 2007
Hi There,
I need to call a function to calculate a value. This function accepts a varchar parameter and returns a boolean value. I need to call this function for each row in the dataflow task. I thought I would use an oledb command transformation and for some reason if I say..
'select functioname(?)' as the sqlcommand, it gives me an error message at the design time. In the input/output properties, I have mapped Param_0(external column) to an input column.
I get this erro.."syntax error, ermission violation or other non specific error". Can somebiody please suggest me what's wrong with this and how should I deal this.
Thanks a lot!!
View 8 Replies
View Related
Feb 13, 2008
Hi,
I have two tables,
Table A on Server 1 (3 ROWS)
ID Name Address
ID1 A B
ID2 X Y
ID3 M N
There is another table on a different server which looks like
Table B on Server 2
PKColumn ID Details
1 ID1 Desc1
2 ID1 Desc2
3 ID1 Desc 3
4 ID2 Desc
5 ID2 Description
As you can see the ID is the common column for these two tables,
I want to get the Query the above 2 tables and the output should be dumped into a new table on Server2.
I am using the following SSIS Package
OledbDataSource-------> OledbCommand(Select * from TableB where ID =?)
From here, how can insert the rows returned from the oledb command into another table.
Since, for each row of TableA it will return some output rows...How can I insert all these into the New Table.
Please help on configuring the output of the oledb command.
Thanks,
View 5 Replies
View Related
Jan 9, 2007
Hi there,
In order to prevent lookup errors in a lookup transformation, I've decided to go for an OleDb Command Transformation.
This transformation should check the lookup and, if it turns out to be null, ir returns a dummy value. Otherwise, it would return the lookup value.
This should be done by doing something like this:
select coalesce( (select ID_Table2 from ID_Table2 where FK_Table1 = ?), 0)
suposing Table2 has an atribute called "FK_Table1" that should match a column in the data flow.
Now, such command result in this message:
"An OLE DB record is available. Source "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax eror, permission violation, or other nonspecific error".
But, it I remove the coalesce and type the following command:
select ID_Table2 from ID_Table2 where FK_Table1 = ?
It presents me no errors and allows me to continue.
Did i did anything wrong or is this something that is not possible to be done?
I know i have the option to use a script task to do this operation, but that would turn the maintenance process a little more difficult.
Otherwise, i know i could also re-direct the error from the lookup transformation and handle it. Though, my package has about 10 lookups and that would turn my package a lot more complex than
Thanks in advance
Best Regards
André Santana
View 6 Replies
View Related
Mar 27, 2007
I AM working on DW building and i m using SSIS.I haev problem with data transformation OLEDB command.I have written a query to clean data in OLEDB command box ,but it takes whole lot of time because at a time it slects 6000 rows from the source and put in to destination but i have 300000 rows to process.How can i increase the size.
View 4 Replies
View Related
Dec 8, 2011
I need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies
View Related
Oct 14, 2007
Hi all, working as an intern at MS for a year (SDET) and I've been asked to find a way of transfering items from one sharepoint lists to another (intranet to extranet) without access to the underlying SQL servers'. So what I've done is use an access databaes as a bridge creating active views of the two sharepoint lists. I wrote a C# console application that executed some SQL on the bridge to copy data between the two sharepoint lists, this was great could handle updates, deletions and additions of new items. Now I've been asked to make this update process 2 way on a certain field (status) I've been trying for a couple of days now and I'm having no joy. The method I was using (polling) allowed for the first couple of status changes (used 2 statements) but then wrote back the wrong way see below for example SQL:
Extranet owned statuses: Declined, Approved, Not Started, In-Progress, Completed.
Intranet owned statuses: Needs Review, MS Declined
UPDATE intranet JOIN extranet ON (blahblah=blahblah)SEt intranet.status=extranet.status WHERE extranet.status IN (all extranet owned statuses);
UPDATE extranet JOIN intranet ON (blahblah=blahblah)SEt extranet.status=intranet.status WHERE intranet.status IN (all intranet owned statuses);
Can anybody tell me where I'm going wrong and offer any suggestions?
Thanks,
Alex
View 1 Replies
View Related
Jan 22, 2007
hi,
i am using oledb to connect to oracle.
i want to know if there is a way to handle different character sets in this type of connection. for sql to sql, i have been using auto translate in the connection string.
what about for sql oledb to oracle? how can i make sure that the data from sql to oracle is transferred as is?
many thanks.
View 1 Replies
View Related
Feb 17, 2008
is it true that I will not be able to use the returned value from an sp that is called on every row from an oledb command transformation? I see all kinds of complaints on the web but cant determine if this would be a waste of time. I'd like to append the returned value (which is calculated and cannot be joined in the buffer) to the data on its way out of the transformation.
View 3 Replies
View Related
Sep 11, 2007
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
exec usp_Inert_Registration_Episodes_Assessments
@Unique_ID=?,
@Gender_Cd=?,
@Birth_Date=?,
@Race_Ind=?,
@Ethnicity_Cd=?,
@Registration_Dt=? ,
--
--@Object_Key
View 16 Replies
View Related
Nov 2, 2007
I've used the OLE DB Command transformation serveral times to call stored procs and pass in a set of parameters. For some reason, every time I try to use it now w/ any parameters, I get this error:
OLE DB Command [188]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax error, permission violation, or other nonspecific error".
I've set the SqlCommand property of the transformation to:
exec Create_BuyerContractRadiusTerritoryPostalCode_By_BuyerContractId_PostalCode_Radius ?,?,?,?,?
Here is the stored proc I'm calling (which works fine):
ALTER proc [dbo].[Create_BuyerContractRadiusTerritoryPostalCode_By_BuyerContractId_PostalCode_Radius]
@BuyerContractId int,
@PostalCode nvarchar(50),
@Latitude float,
@Longitude float,
@Radius smallint
as
set nocount on
set tran isolation level read uncommitted
insert into BuyerContractRadiusTerritoryPostalCode (BuyerContractId, PostalCode)
select distinct @BuyerContractId, pc.PostalCode
from PostalCode pc
where dbo.CalculateDistance(@Latitude,@Longitude,pc.Latitude,pc.Longitude) <= @Radius
and not exists
(
select bcrtpc.PostalCode
from BuyerContractRadiusTerritoryPostalCode bcrtpc
where bcrtpc.BuyerContractId = @BuyerContractId
and bcrtpc.PostalCode = pc.PostalCode
)
Any help would be greatly appreciated. This is time-sensitive project I'm working on and I really didn't anticipate running into this so I'm kind of scurring for answers. Thanks!
View 11 Replies
View Related
Mar 20, 2007
I am transfering large data.
I use oledb command to insert and update as i need to make some modifications to incoming data.I do my modifications in the procedure.
But the command does not insert as the data is huge at one shot.
if i try to send small data it works fine
Its shows warning(yellow color)
How can i achive inserting huge data effeciently please help.
View 4 Replies
View Related
Jul 3, 2006
Hi,
I am writing a Dataflow task which will take a Particular column from the source table and i am passing the column value in the SQL command property. My SQL Command will look like this,
Select SerialNumber From SerialNumbers Where OrderID = @OrderID
If i go and check the output column in the Input and output properties tab, I am not able to see this serial number column in the output column tree,So i cant able to access this column in the next transformation component.
Please help me.
Thanks in advance.
View 13 Replies
View Related
Dec 20, 2006
I am trying to use a CTE in an OLE DB Command data flow transformation object. However, when I enter the cte and corresponding query in the SqlCommand field of the OLE DB command editor dialog, I get a syntax error. Can CTE's be used data flow objects? I have been able to use them in an Execute SQL Control Flow Item, but not in any data flow item.
View 7 Replies
View Related
Aug 29, 2006
Hi,
I'm stuck on the following thing:
After a slowly changing dimension task I replaced the OLE DB Destination task by an OLE DB Command and created the insert manually. This because I need to work further on the dataset. So I do a union all between the output of the two OLE DB Commands (insert and update). Untill here no problem. But than, because I need an ID further on, I do a lookup in the table in which I just inserted and updated my data for the right ID's. When I run this project I get the error message "row yielded no match during lookup".
I don't understand this beacause I just inserted the data and I've checked, it's there.
I could resolve this by splitting up in two control flows (reselect all the needed data wíth the ID-field in my selection) but I would prefer to solve it in another way
Greets,
Tom
View 12 Replies
View Related
Aug 21, 2007
We are having package which transfers data from AS/400 to SQL server 2005, the source component is a data reader which connects to the AS/400 and pulls the data and some transformation are being made and then finally Oledb command is used which uses a Stored Procedure to Insert/Update the records.
The Packages transfers nearly 2,00,000 records, but after transferring some records we get the following error:
Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
This same error is getting repeated many times. Anyone have come across this problem, any help appreciated. Thanks in advance.
View 1 Replies
View Related
Jan 10, 2006
Hello,
I have an issue with the OLEDB Command in a package of mine where it used to work and now it doesn't. I had 4 different packages where I was bringing in a flat file, massaging the data, and calling 1 of 4 Stored procedures using the OLEDB Command. Everything was working great, then we decided to use the SSIS EBCDIC conversion in the flat file connection rather than converting to ASCII outside of SSIS. This wasn't a problem for 3 of the 4. The one I have an issue with seems to be somehow corrupt, I keep getting the error "Invalid character value for cast specification", as well as "DBSTATUS_UNAVAILABLE", for a particular column. When I re-map that column in the OLEDB Command task, re-run the package, it then tells me a different column has the exact same error. So in going through and re-mapping all of the columns, it goes back to the 1st column I had an error with and gives me the exact same error... ARRRGGGGHHHH!!!!
It seems like something is corrupt in SSIS or something. Does anyone have any thoughts, other than re-writing the package from scratch?
I know there's no issue with the data, I imported the same file into a test table without problems.
View 5 Replies
View Related
Dec 20, 2007
Hi,
When I execute a stored procedure from an OLE DB Command transformation, where the sp takes a parameter and RetainSameConnection=TRUE and DelayValidation=TRUE are set, I get the error
"Syntax error, permission violation, or other nonspecific error"
If I take out the param or set RetainSameConnection=FALSE on the connection, all is fine again?
Has anyone has come across this?
Cheers
View 3 Replies
View Related
Sep 27, 2007
Group,
First let me say that I'm new to SSIS, so be gentle with me.
I need to extract a limited set of data from a very large view in Oracle (I know, yuk!). The view contains millions of rows, but I only need the child matches of 343 unique keys in a one to many relationship. In pure SQL the query would look something like this.
Select proj, tn, rn, total FROM Oracle.view WHERE proj in (select distinct proj from MSSQL.dbo.projlist)
As you can see, this is an impossible query on many levels.
My first thought was to get the runtime list into a variable and use that variable as a parameter in the Oracle OleDb Source. Alas, the Oracle source will not allow me to add a parameter.
My second thought was to use a script component and build a SQL_Command string into a variable with all of my keys included. Then use the read_write variable as the SQL Command from variable in the Oracle Source. My attempts to construct such a variable expression have failed.
Any ideas would be appreciated.
RH
View 11 Replies
View Related
Nov 9, 2006
Hi
We have a user-defined function that can be called directly via SQL (in SQL Server Management Studio) without error. We would like to use this function to populate a column, whist data is being processed within Integration Services. Using an OLE DB Command transformation to achieve this would seem the most appropriate.
The following was inserted for the SQLCommand property:
EXEC ? = dbo.GetOrderlineStatus(@dt_required = ?, @dt_invoice = ?, @dt_despatch = ?, @ch_status = ?, @si_suffix = ?, @re_quantity = ?, @vc_invoice_id = ?, @vc_order_id = ?)
However, when the Refresh button is pressed we are presented with the error below:
Error at Load Orderline [OLE DB Command [15171]]: An OLE DB error has occurred. Error code: 0x8004E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x8004E14 Description: "Invalid parameter number".
If we use SET instead of EXEC (e.g. SET ? = dbo.GetOrderlineStatus(@dt_required = ?, @dt_invoice = ?, @dt_despatch = ?, @ch_status = ?, @si_suffix = ?, @re_quantity = ?, @vc_invoice_id = ?, @vc_order_id = ?)) the following error is produced:
Error at Load Orderline [OLE DB Command [15171]]: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax error, permission violation, or other nonspecific error".
Any assistance would be greatly appreciated.
Thanks
Neil
View 7 Replies
View Related
Dec 3, 2007
Hi All,
I am using OLEDB Command transformation in a data flow to update the table. Find the columns for the table EMP as follows.
EmpID - int
EmpName - varchar(40)
EmpSal - float
Status - varchar(20)
I am using the following command to update the table.
Update EMP set status = 'Disabled' where EmpID = ? and EmpSal = ?
when I use the above condition the type of the second parameter is taking as "double precision float" as the incoming input column type is "double - precision float". This is fine.
But when I use the following condition the type of the param is taking as different one.
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = 0
It is taking as "four byte signed integer" even though the incoming input column type is "double precision float" thus I am loosing the precision and getting error when the limit exeeds. If I use 0.0 then it is taking as "Numeric" type.
If I use convert function like (EmpSal + ? ) = Convert(float, 0) then it is taking as "double precision float".
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = Convert(float, 0)
My question is how it behaves in the above situation. Can any body clarify please?
Venkat.
View 1 Replies
View Related
Oct 31, 2007
I have a stored proc with 28 commmands but only 24 are loaded. If I move the parameters around the ones that didn't show are visible and the ones after the 24th parameter don't show up. Is there some sort of limit on parameters for OLEDB commands that execute stored procs in the exec procname @p = ? construct?
View 3 Replies
View Related
Dec 11, 2006
HI,
I want to use the OLEDB command to call a oracle function, but i havnt found any materials about how to do that, my oracle function is as below:
CREATE OR REPLACE function GET_ZONEID_FROM_SYFZ(ycz varchar2,xc varchar2,strat_id varchar2)
return varchar2 IS
zone_id_result varchar2(10) ;
begin
PKG_DM_DQ.GET_ZONEID_FROM_SYFZ(ycz,xc,strat_id,zone_id_result);
return zone_id_result;
end;
In OLEDB command transformation component, i fill the sql command with "select GET_ZONEID_FROM_SYFZ(?,?,?) from dual", but i dont have it worked.
The error message is :provider can not derive parameter information and setparameterinfo has not been called.
Who have any idea about how to make it work?
Thanks ~~
View 7 Replies
View Related
Nov 15, 2007
HI,
In my mapping i have used one OLEDB command which updates a table.
It updates 70 columns of that table.
The problem is that it is taking long time to execute that(almost 15-20 minutes)
It is updating almost 3k-5k rows.
I tried to put the update statement in SP and called that in OLEDB command.
Still it is taking same time.
Please advice how to solve this problem.
Thanks in Advance.
View 6 Replies
View Related
Dec 11, 2007
We have SS2K5 source and DB2 Target. I downloaded and installed MS OLE DB provider for DB2. It is configured correctly. The data insert works fine. But I am having problem with update/delete on DB2 when passing string parameters.
The OLEDB command works fine when I hard code the values:
delete from TableName where Col1='abc' and Col2='xyz'
But when I use parameters the package executes successfully, but the data is not delete on DB2.
Any one having similar experience or solution for this is really appreciated.
Thanks,
View 7 Replies
View Related
Mar 13, 2008
Hi
How to use a global variable of a package inside oledb command
Scenario:
Glb_Rowcount Variable
I need to use this variable value inside oledb command.
P.S: No use of stored procedures and no script component
View 4 Replies
View Related
Apr 24, 2008
Hi All,
In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards.
I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted.
The SP looks like this
Code Snippet
CREATE PROCEDURE USP_SVInsS093Data_V001
@DetailRECTYPE nvarchar(5),
@StoreNumber int,
@Product nvarchar(20),
@Planogramref nvarchar(20),
@DisplayGroup nvarchar(5),
@ModSequence int,
@Shelfnumber int,
@Productposition int,
@StartModnumber nvarchar(20)
AS
SET NOCOUNT ON
BEGIN
if object_id('tempdb..##S093_TempTable') is not null
drop table ##S093_TempTable
CREATE TABLE ##S093_TempTable(
[DetailRECTYPE] [nvarchar](5) NULL,
[StoreNumber] [int] NULL,
[Product] [nvarchar](20) NULL,
[Planogramref] [nvarchar](20) NULL,
[DisplayGroup] [nvarchar](5) NULL,
[ModSequence] [int] NULL,
[Shelfnumber] [int] NULL,
[Productposition] [int] NULL,
[StartModnumber] [nvarchar](20) NULL
)
INSERT INTO ##S093_TempTable
([DetailRECTYPE]
,[StoreNumber]
,[Product]
,[Planogramref]
,[DisplayGroup]
,[ModSequence]
,[Shelfnumber]
,[Productposition]
,[StartModnumber])
VALUES
( @DetailRECTYPE ,
@StoreNumber ,
@Product ,
@Planogramref ,
@DisplayGroup ,
@ModSequence,
@Shelfnumber ,
@Productposition ,
@StartModnumber
)
If i have a select query after the Data Flow task only the last row is returned.
Now how to make the ##Table keep all the rows.
Any help will appreciated.
Thanks in Advance...
Cheers
Srikanth Katte
View 8 Replies
View Related
Dec 20, 2007
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies
View Related
Jun 5, 2007
Hello
This is my first post so please be gentle!!
I have a stored proc that returns a value:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
SET NOCOUNT ON
GO
-- =============================================
ALTER PROCEDURE [dbo].[spPK]
-- Add the parameters for the stored procedure here
@varNSC varchar(4),
@varNC varchar(2),
@varIIN varchar(7),
@varIMCDMC varchar(8),
@varOut as int output
AS
Declare
@varPK int
set @varPK = 0
BEGIN
--This checks Method 1
--NSC = @varNSC
--NC = @varNC
--IIN = @varIIN
begin
if exists
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varPK =
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varOut = @varPK
if @varPK <> 0 Return
end
[There are some more methods here]
Return
END
How do I get at the output value?
I have tried using derived column and ole db command but can't seem to grasp how to pass the value to the derived column. I can get oledb command to run using 'exec dbo.spPK ?, ?, ?, ?, ? output' but don't know what to do from here.
View 10 Replies
View Related
Jul 5, 2006
I need to extract rows using date as parameter... where source contains millions of rows but few thousands per date.
I tried using SQL command in data access mode in OLE DB Source Editor but having problem with passing parameter...
Anyone has solution?
View 10 Replies
View Related
Sep 27, 2007
I have a data flow and inside the data flow , i have a ole db source and ole db command task to execute an insert transaction ( SP).. i would like to save the error output if the insert didn;t happend into a error log table..
but when I darg an error output line ( red) to another ole db command to insert an error log , i can only see two columns( error code and error column) are available in OLEDB command advance editor related to errors.. this doesn;t tell you much information about the error.how can i grap the error reson(desc) as the error output and store into a erro log table? so that i can see what the problem is?
View 1 Replies
View Related
Nov 6, 2015
Is it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies
View Related
Dec 6, 2007
I am having a problem on updating data in DB2 target table.
I followed BJ Custard's (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1058272&SiteID=1&mode=1)(thanks amillion!) post and configured OLEDB destination to insert data. But I have to also update or delete data from the target table based on flag from source.
I tried using OLEDB command which uses the OLEDB connection created by following the steps posted in above link.
Trail 1real requirement):
When I used the SQL query:
delete from table where Col1=? and Col2=?
I am unable to map to the parameters. When I click refresh button after writing the query, I get "There is a data source column with no name. Each data source column must have a name." message. Added to before message, there are no parameters to map to.
Trail 2:
When I hard code the parameters :
delete from table1 where Col1='abc' and Col2='xyz'
no parameters will come up, so no mapping. So when I execute the mapping I get the following error:
Error: 0xC0202009 at Load .....................................................: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E00.
Lookup on above error codes show those are related more to target Db2 database.
I am sure some one might have used the OLEDB command task, not only just insert task.
Any help is really appreciated.
View 14 Replies
View Related
