Hai
I wrote a sp in sqlserver2000 and sp consists of 1 input parameter of type datetime and everything is working fine but if i pass the argument of invalid date format it is giving error.Is there any way to handle errors in sps and even if i give invalid format it should not raise errors.Pls reply as early as possible.
Thanks
Aruna
Hello to all,
On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way...
Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Hi Everyone,
I have developed a SQL script that runs daily using the SQLCMD command line utility. The script executes about 15 INSERT INTO statements. The problem is that when one of the SQL statements contains an error, the script stops running, therefore not running the SQL statements below it. How can I avoid this? I would like the script to continue to the next statement. Also, how can I save the error messages if any errors has occurred?
Thank You
-Sam
Hello,
I want the server to check validation rules and not the user application
is this possible???
I want to send my own messages to the user and dont want the user to see the
servers messages.
Thank you in advance
Eran
HI!!
I've been working for an year or so with DTS, but it still makes me mad with it's cryptic error messages!!!!
"The task reported failure on execution" is one of the "funny" error messages I retrieve. I've tried with the log option, but error messages stored there are as cryptic as the one shown on the screen!!!!!
Timothy Peterson in "MS SQL Server 2000 DTS" provides code chunks that can be used to "decode" numerical error messages into something readable and understandable, but I really don't realize where should I put that code :( It seems to work only if you are executing packages via Visual Basic, and not using the MMC
That's it, I really do need help with this!!!!!!! I beleive that there's someone out there that had faced and solved this problem !
Thanks in advance
lorena
When I have an alternet Data Flow in an event handler, caused by a record failing to be inserted due to a unique-key constraint violation, does this increment the number of errors, counting towards the MaximumErrorCount? How can I NOT count it as an error?
The thing is, I need to insert 300,000+ records each day, and some may be duplicates from data already in the table. So I set a unique key constraint on the table, and if during the load, it fails, it will trigger an alernate data flow to load the error records into another table. But if someone tries to load a file that already has been loaded, for example, all the records would be duplicates, which would be equivelant to 300,000+ errors, and I don't want to keep setting the MaximumErrorCount property higher and higher.
Is there any way to treat the error as "being handled" in the dataflow, so therefore doesn't treat it as an error? Or conversely, can I set the MaximumErrorCount property to 0 or -1 to accept all errors, no matter how many?
Hi,
iam having vs2005 installed on my machine and i also installed sqlserver2005 dev edition on my machine...Now iam devloping a Window Appplication in which I need to populate a grid from Sqlserver2000 (dev edition) which installed on remote (i.e another network)....when i try to run my application it gives me a error tht "Unable to connect to sqlserver2005".actaully i specified in my connection string to connect to Sqlserver2000 on the remote machine.
I feel to know how to enable remote connection on Sqlserver 2000.So tht i can access this sqlserver2000 from another machine
With regards
Mahender
We are displaying the report in our reporting application but we do not want to display errors from SSRS to the user. We want to handle the errors and display a user friendly message.
How can that be done?. We are making URL access to the report server.
Thanks.
Hi
I am trying to use this painful new SSIS process. I basically need to use a lookup task to check to see whether a record exists or not. If not, then I need to insert the record. However, because this is treated as an error situation (which is stupid in itself), I get a problem when the number of records not found reach the MaximumErrorCount, and the rest of the package fails. Is there any other method of doing this type of thing, without simply increasing the MaximumErrorCounty to some ludicrous value. I could do this type of thing very very very easily when using DTS packages using the Data Driven Task, it seems so stupid that I can't perform the same kind of task using SSIS.
Any help would be appreciated
Thanks
Darrell
In almost all scenarios, where there is an error, it also raises 3-4 other errors like these ones below.
I'm 100% sure, the 1st one is the actual error resulting in package failure and the errors 2-5 is the result of error #1. So what ever code I have in the error handler section of the package gets executed 5 times.
How do I handle this? Can do I hard coding for the error numbers?
1. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01858: a non-numeric character was found where a numeric was expected ".
2. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
3. Thread "SourceThread0" has exited with error code 0xC0047038.
4. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
5. Thread "WorkThread0" has exited with error code 0xC0047039.
Thanks
With the new features of SQL Server 2005 for error handling (TRY...CATCH blocks), how are you propagating errors back to the caller? For example, lets say we have 3 stored procedures:
dbo.usp_UpdateSomeTable1
dbo.usp_UpdateSomeTable2
dbo.usp_UpdateSomeTable3
Let say some application calls dbo.usp_UpdateSomeTable1, in turn dbo.usp_UpdateSomeTable1 calls dbo.usp_UpdateSomeTable2 and in turn dbo.usp_UpdateSomeTable2 calls dbo.usp_UpdateSomeTable3.
Now if dbo.usp_UpdateSomeTable3 generates an error, how do you handle propagating this back to the caller?
I envision encapsulating the contents of each procedure in a TRY...CATCH block like so:
BEGIN TRY
...do some stuff
END TRY
BEGIN CATCH
...handle errors - whether generated from our own RAISERROR statements or by the database engine.
END CATCH
Now my problem is I would like to capture all the error variables and toss them back to the caller and keep sending that information up the stack. So far my attempts have been pretty unreadable and end up being just a cluster of text.
Hi All,
Well, tha case here is simply that i have a (Suppliers.csv) as an Input.
When taking that file, I do some validation on it's rows (Data type validations, Mandatory Fielda validations..etc).
When some rows to do not meet the requirments i put in these validations , it is supposed to be directed to an (Errors) Table in my SQL DB.
I want to include the order of the invalid row in the input File (The row which did not pass from the pre-mentioned validations) within the (Errors) Table when i direct the invalid rows to it.
Any ideas ?
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
Hi, I have a little question regarding
SQLServer2000 vs ADO of Visual Basic 6
In a code snipplet a have something like:
Conn1.BeginTrans
Set rec_tmp = Conn1.Execute("SELECT * FROM IDENTIFICATIONS;")
Conn1.Execute "DELETE FROM CARS WHERE CAR_ID = 8;"
.
.
.
Conn1.CommitTrans
and whe VB tries to execute the line with the
DELETE sentence the Err object says something like:
"cannot create a new connection because you are in
distributed or manual transaction mode"
However, if I remove the line that executes the sentence
SELECT * FROM IDENTIFICATIONS the error never shows up.
Seems like I can´t execute a SELECT before a DELETE/UPDATE
even if I execute the SELECT in some other table.
I´ve tried changing the IsolationLevel, Mode and Cursor
Location properties and the error always occurs.
Furthermore, I tried putting the SELECT out of the
transaction and the error continues showing up.
Why does this occurs? Is there a way to solve it?
NOTE: I need forcely to execute that SELECT before the DELETE.
Thanks for the time
Roland
Hi, I have a little question regarding
SQLServer2000 vs ADO of Visual Basic 6
In a code snipplet a have something like:
Conn1.BeginTrans
Set rec_tmp = Conn1.Execute("SELECT * FROM IDENTIFICATIONS;")
Conn1.Execute "DELETE FROM CARS WHERE CAR_ID = 8;"
.
.
.
Conn1.CommitTrans
and whe VB tries to execute the line with the
DELETE sentence the Err object says something like:
"cannot create a new connection because you are in
distributed or manual transaction mode"
However, if I remove the line that executes the sentence
SELECT * FROM IDENTIFICATIONS the error never shows up.
Seems like I can´t execute a SELECT before a DELETE/UPDATE
even if I execute the SELECT in some other table.
I´ve tried changing the IsolationLevel, Mode and Cursor
Location properties and the error always occurs.
Furthermore, I tried putting the SELECT out of the
transaction and the error continues showing up.
Why does this occurs? Is there a way to solve it?
NOTE: I need forcely to execute that SELECT before the DELETE.
Thanks for the time
Roland
date(m/dd/yyyy)9/18/2006 In this above table i want to select only the month in this format Sep 2006 . How to do that ?
View 1 Replies View RelatedHello everyone,My project (asp.net and sqlserver2000) is working fine in my intranet. But sometime, it cannot connect to sqlserver, it shows "SQLServer does not exists or access denied". If I restart my dbserver and webserver, then it again works fine.Please give me a solution.
View 1 Replies View RelatedHi,
I have created the below procedure in SQL SERVER 2005.
But when I copy out the same in SQL SERVER 2000. I get an error at the underlined place. It says
Line 32: Incorrect syntax near '('.
ALTER procedure [dbo].[VTELcardvalidation1]
@CardValue1 int,
@CardValue2 int,
@CardValue3 int,@Result nvarchar(50)output
as
begin
declare @CrdPinNo varchar(100)
declare @CrdNo nvarchar(100)declare @count int
declare @inc int
declare @concat nvarchar(200)create table #temptable(crno nvarchar(50),pno nvarchar(50))
--First Card
--Change here
select @count=count(cardno) from vendorcardvalidation where cardvalue=1500 and flag=0if (@count)>@CardValue1
begin
declare cur1 cursor forselect top(@CardValue1) pin,cardno from vendorcardvalidation where cardvalue=1500 and flag=0 order by cardno
open cur1fetch next from cur1 into @CrdPinNo,@CrdNo
while(@@fetch_status=0)
beginupdate vendorcardvalidation set flag=1 where cardno=@CrdNo
insert into #temptable values(1500,@CrdPinNo)fetch next from cur1 into @CrdPinNo,@CrdNo
endclose cur1
deallocate cur1
set @Result='Success'end
else
begin
set @Result='Failure'
end
select * from #temptable
drop table #temptable
end
It seems the the word 'top' will not be supported in sqlserver 2000. What should I do?
Regards
cmrhema
Sir,i am running .net1.1 on my system with sqlserver as my database.I am devaloping an e-trading project in ASP.NET with VB.net.My problem is that,I am not getting the correct syntax to query the database with SELECT(with WHERE clause)in vb.net.Please help me.
View 1 Replies View RelatedHi,
I would like to create groups in SQLServer2000.Do i need to do this by roles or can i create groups for each database.I read some where that there where
no groups for SQLServer7.0. Is this option available for the latest versions.
Any help will be appreciated.
Thanks in Advance.
Ran.
I turned the Audit ALL option on SQLServer instance "security" tab and restarted the SQLServer but do not see any information logged in SQLServer Logs though I tried to access databases and logged in a couple of times through Query Analyzer. Why is that no logging happened and how can I get this fixed?
Any help is appreciated.
Vinnie
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
More of a SQL Server problem than a ASP one but hope you can help me :)
Im tryin to do my first data based application using ASP.net and silly me I forgot to add users when I created then database so now Visual Studio can't access it.
Can someone tell me the syntax to add/create a user to MSSQL database so I can then grant them privelidges to the tables.
thanks very much
Tom
hi all,
my problem is failure in the connection to SQLserver2000 remotly( to city a) by enterprise manager or query analyzer via windows authentication ( this error appears "login failed for (domain/user)" ),while no problems happened in the connection when i would to connect to other servers at other locations(to cities b,c) via windows authentication.
note that i can access to (city a)server via sql server authentication , but i want to access to this server(city a) via windows authenication as the other locations because this authentication mode is policy of our system, and note also that persons in city b can access to all servers (city a,c) via windows authenication .
regards,
Hi,
If access database has an extension of .mdb then what is sqlserver2000 file extension?
Hi all,
I created a database maintenance plan with backup + transsactionlog backup+optimizations. The first two jobs work fine but the Optimizations job is failing with error:
sqlmaint.exe failed. SQLSTATE 42000, Error: 22029. The step failed.
User is admin on local box and "sysadmin" in db server role. Any suggestions to resolve this?
Thanks
Vinnie
When I click on Enterprise manager->Database this is the error I am getting:
A runtime error has occurred. Do you wish to debug. Line 306 Error: unspecified error. Yes/No
This is happening on user databases only not the SQL standard dbs; pubs,master,northwind.
How can I fix this?
Thanks for any help.
Vinnie
Wilson writes "Hi, I have Sql Server 2000 on win98, i can't retrieve any data. Instead, it shows an error, says that some files is missing or is not registered.
the mssql was reinstalled and it's goin then same.
what could be the problem? what could be the solution?"
Hi All,
I understand I can use Index tuning Wizard to index a DB. I understand as well I have to feed it with a workload file, which is a collection of queries. I do have a limited number of stored procedure (150-200 in total) being constanlty executed against this DB (around 700MB).
Can I generate a workload file with these storedprocedures optimizing so the DB for their execution?
If yes, how? can someone point out some good tutorial about this?
Any help would be much appreciated,
JI
I created table with "id" field as "uniqueidentifier" (primary key).I connect via ODBC from MS-Acces.-->>> Don't know how to something like "Autonumber" in MS-Access.Let me know If any trigger or something like this is required.Please post some code of trigger if need.Until now I have only developed some native MS-Accessdatabases. I hope there is some solution about "Autonumbering records"in SQLServer.SqlServer 2000, Access Xp.Marek Bħbski
View 2 Replies View RelatedI have 2 questions:
1. How to encrypt data of database in SQL Server 2000 ? Someone can't see true data
if without password or something else.
2. If i have 2 database . All of them have same table, structure, ....How to update or insert or change in the second database when i update or insert or change in the first database automatically ?
Thank you very much.
There is no prompt ' UPGRADE' when I install SqlServer2005
Also check select @@version after installed
Still be 'Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Aug 6 2000 00:57:48 Copyright (c) 1988-2000 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2) '
Why does this happened?
OS is Windows2003 Server
Thanks
I am working on Windows mobile platform using C#. I am using Merge Replication to do synchronization between SQL Server2000 and SQL Server 2005 Mobile edition and t is working fine.
The Server Tables are copied in the Client DB. It works fine with one way, i.e., server pushing data to Client Database (in PDA), but when i tried to update from PDA database, server keeps over writting PDA databse.
The requirement is that before adding our PDA database as subscriber,there are some tables with same name and structure as in Server with some records. After that i added it as subscriber and sycnchronized.The tables in the server are going to overwrite the records in PDA. My requirement is to not overrite the records but it should update the existing table.
Is it possible....Can Any one Help meeeeeeeeeeeee plzzzzzzzzzz.