Handling Multiple Data Records With Sp
May 2, 2007
I have a need to read a table and extract records that matches a criteria (dough!, not that simple). Then I put the record in a text message and send them out via email. Works OK, but the problem is when I have multiple records for one entry. Since SQL doesn't have arrays "per say", I need to load the records on a "temporary array" then assembly the message at the end to include the records. Any suggestions how to "emulate" an array on a stored procedure (SQL), not sure what direction to follow. thanks
View 2 Replies
ADVERTISEMENT
Mar 20, 2014
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
View 0 Replies
View Related
Sep 1, 2006
For performance issue, I believe many program should have a house-keeping procedure to clean up transaction history. Is there any best practice to perform this? Or should it be done simply by moving transaction data from the transaction table into a history table? Any better or consideration that I should be concerned of?
View 1 Replies
View Related
Sep 1, 2015
I want to create a view to get records from multiple tables. I have a UserID in all the tables. When I pass UserID to view it should get records from multiple tables. I have a table
UserInfo with as data as
UserID=1, FName = John,
LName=Abraham and Industry = 2. I have a
Industry table with data as
ID=1 and Name= Sports,
ID =2 and Name= Film.
When I query view where UserID=1 it should return record as
FName =John,
LName = Abraham and
Industry= Film
How to write query?
View 2 Replies
View Related
Jul 17, 2015
IF EXISTS (SELECT 1 FROM RoleUser WHERE User_Id = 12346 AND Role_Code = 'CRC')
UPDATERoleUser
SETAccess= 1,
Worklist= 0,
Supervisor= 0
WHERERole_Code= 'CRC'
[Code] ....
View 3 Replies
View Related
Jan 29, 2008
Hi I have created one store procedure which handles global updates I am using cursor to fetch one be one row for updating (It is required for implementing business logic)Now when i execute this store procedure ---it gives me dedlock error , I dont know why i m getting this error(Approx number of rows 1.5lakh)if then i removed unnecessary records from table (Approx -50000) it works fine,Is there any way to handle itI am calling this storeprocedure from my window service.please give me a good solution if possible
View 3 Replies
View Related
Mar 6, 2008
I have over 500 transaction records in a single DB process handling within SQL transaction (Begin, Commit, RollBack and End).
Is there any limitation for the following rollbacktransaction function to handle more records (eg. over 500 records)? Public Shared Sub RollBackTransaction()
Dim transactionObj As Object
Try
transactionObj = SqlTransaction.GetExistingTransaction
If (Not IsNothing(transactionObj)) Then
CType(transactionObj, SqlTransaction).RollBack()
End If
Catch ex As Exception
Throw New Exception(ex.Message)
End Try
End Sub
View 2 Replies
View Related
Oct 14, 2011
I have one ssis package moving the data from staging to destination. In stating table we have the duplicate data. But in destination table 4 columns have primary key. How to handle the duplicate records in oldedb source.
View 8 Replies
View Related
Mar 20, 2012
I am working on SQL Server in VB 2008. I have a table 'Records' having 8 columns. I have a search page where I can choose 5 different parameters to search as 'Category' , 'Name' , 'Date' etc.
I can successfully search with a single criteria selected either Category Name Or Date. But I want to create a single SQL command that can search my 'Records' table for either two or all the parameters depending on the selections made by the user.
View 5 Replies
View Related
Jun 9, 2006
I am writing a stored procedure that needs a access individual entries in a column with multiple entries delimited by a comma(yeah i know, not 1st NF) . Like this:
Key
NotANormalizedCol
1
1324, 5124, 5435,5467
2
423, 23, 5345
3
52334, 53443, 1224
4
12, 4, 1243,66
is there a function that returns a substring given a delimiter character? the only substring returning function that i found are the LEFT and RIGHT that returns fixed length substring.
I am pretty new to this, so I apologize if this is a trivial questions
View 3 Replies
View Related
Jun 26, 2007
In almost all scenarios, where there is an error, it also raises 3-4 other errors like these ones below.
I'm 100% sure, the 1st one is the actual error resulting in package failure and the errors 2-5 is the result of error #1. So what ever code I have in the error handler section of the package gets executed 5 times.
How do I handle this? Can do I hard coding for the error numbers?
1. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01858: a non-numeric character was found where a numeric was expected ".
2. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
3. Thread "SourceThread0" has exited with error code 0xC0047038.
4. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
5. Thread "WorkThread0" has exited with error code 0xC0047039.
Thanks
View 3 Replies
View Related
Jan 21, 2008
Hi all,
I’m returning two values from a stored procedure, one is a basic string confirming that an email has been sent and the other is the normal value returned from running an INSERT statement. So in my code I’m using the ExecuteNonQuery() method. I’m not sure how to handle both returned values in my code in my data layer. This is what I have:
ExecuteNonQuery(cmd);
return Convert.ToString(cmd.Parameters["@ReturnedValue"].Value).ToLower();
Obviously I’d need to return the value returned by the ExecuteNonQuery method as well, normally I’d simply convert the value to an int and precede this with the return keyword like so:
return (int)ExecuteNonQuery(cmd);
Obviously I can’t do this as I need to return two values, the normal value returned by the ExecuteNonQuery() method and my own output parameter value. Any ideas how I can do both? My current method containing the code further above returns a string but clearly this doesn’t help. I’m guessing that maybe I should return an object array so I can return both values? I haven’t encountered this problem before so I’m just guessing. Please help.
Thanks
View 4 Replies
View Related
Jul 23, 2005
Hi,Currently we get data from more then 200 different sources and all ofour vendors provide data in different file formats. The problem is wehave more then 100 DTS packages now and the maintainance is verydiffucult.Every time our vendor changes the format we have to change in multipleDTS packages.Is anybody know what would be the right way of reducing the no. of DTSpackages.The type of file formats we get are .xls .txt .dat .csv etc. and .txt& .dat files comes with different delimitters. The # of columns alsovaries from file to file. Is it possible to have a DTS package whichcan handle diff file formats and loads data into a staging table andfrom there based of the source of the file we can move data intorespective tables & columns.We are using SQL SERVER 2000Thanks in advance.Subodh
View 2 Replies
View Related
Mar 25, 2008
Hi,
I would like to know how i can handle multiple columns returned by a subquery via IN clause in case of sql server 2005. I can do that in oracle by using the following statement:
DELETE FROM TEST1
WHERE (ID, ID1) NOT IN (SELECT ID,ID1 FROM TEST2);
Thanks and Regards
Salil
View 9 Replies
View Related
Apr 18, 2015
Would it be possible to handle multiple file systems (e.g. xlsx, csv, mdb) with different /similar headers in single package without Script Component?
View 1 Replies
View Related
Aug 10, 2015
Here is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
View 7 Replies
View Related
Aug 13, 2006
Hey all,I am having some serious trouble getting the correct syntax for a select statement to work the way I need it, any help I could get on this would be greatly appreciated.I have a table called Units which stores computers and a table called Software which stores software. I have a bit field in Units called OEM, when this is set to true I don't want the select statement to pull this unit down when I am assigning software to other units.Here is my select statement: SELECT Software.SID, Software.SN, Software.Name, Users.First + ' ' + Users.Last AS 'Assigned User', Units.Make + '-' + Units.Model AS 'Assigned Unit' FROM dbo.Software LEFT JOIN dbo.Units ON Software.SN = Units.SN LEFT JOIN dbo.Users ON Units.UID = Users.UID WHERE (Units.OEM = 'FALSE') AND (Software.SN LIKE '%' + @SearchString + '%')Everything works as expected, unless of course the unit has no software assigned to it yet, it won't return it because its not tied to a Units.OEM field. Is there anyway to have it return ALL records that even arn't joined OR are joined but have OEM set to false?Thanks, let me know if I need to clear anything up.-Matthew
View 2 Replies
View Related
Nov 4, 2004
i want to select all the user tables within the database and then all the records with in each table.
plz tell me one query to do this.
ex: suppose x and y are user tables and x contain 10 records and y contains 20 records . i want a query which displays all 30 records together.
View 1 Replies
View Related
Jan 20, 2006
What is the simplist/correct way to delete multiple records from multiple tables. Any help appreciated. Thanks! (Yes, I'm totally new to this.)
delete dbo.tblcase
where dbo.tblcase.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaseclient
where dbo.tblcaseclient.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaseinformation
where dbo.tblcaseinformation.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaselawyer
where dbo.tblcaselawyer.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaseprosecutor
where dbo.tblcaseprosecutor.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
View 1 Replies
View Related
Jan 2, 2008
I have a peculiar requirement. I need the unmatched data to passed on a bad data table as well as tied to a dimension "Others". Please guide how to suffice these two condition simultaneously
View 1 Replies
View Related
Jul 25, 2007
I have an SSIS package that takes in a flat file and pushes the data into a table. However, once in a while the file will have some bad data in it (for example, this particular time I have too many delimiters on one line). I want the package to redirect the row to an error table and keep going with the processing for the rest of the data. To do this, I have hooked up an error output from the flat file source to an OLE DB destination and assigned all the rows to Redirect Row on Error in the Error Output section of the flat file source. Unfortunately, it does not work! The flat file receives an error and stops. Is this because something different has to happen when it is a problem with the whole row? Any help would be appreciated, thanks.
View 6 Replies
View Related
Feb 21, 2007
Hi,
I want to fetch Unicode data from MS SQL server 2005.I have created one user with russian language characters.
Following is my code snippet:
------------------------------------
wchar_twchar1[55];
char VALUE[255];
while (rc != SQL_NO_DATA)
{
rc = SQLFetch(hstmt);
if (rc != SQL_NO_DATA)
memset(VALUE,0,255);
int length=wcstombs( NULL,(wchar_t *)&wchar1, wcslen(wchar1));
char* strChar = (char *) malloc((length +1 )* sizeof(char));
if (strChar != NULL)
{
count++;
memset(strChar,0, length + 1 );
int i =wcstombs(strChar, wchar1, wcslen(wchar1) );
printf( "i is %d",i);
}
printf( "The length is %d",length);
wprintf(L" <%s>", wchar1);
printf(" simple char <%s>", strChar);
wprintf(L" simple char <%S>", wchar1);
}
-----------------------------------
CAn anybody help me ?
I think problem is in fetching of name.
Does anybody have working code for fetching unicode data from SQL server 2005.
Also I want query that will tell the locale setting of the server and also client?
Thanks-----
View 4 Replies
View Related
Apr 18, 2007
Hi Guys,
I am facing problems with concurrent access in SQL Server 2000,The scenario is that the DB contains one huge de-normalized table containing 40 million records.
The application frequently queries this table to populate other derived tables,the sql queries take a long time to return results.
So if one query is in execution the other user's query goes into a
wait mode.Please suggest how I can better this.
Or do I need to upgrade to 2005.
Regards,
Prashant
View 2 Replies
View Related
Mar 11, 2008
Hi, I have source data in encrypted format. How should i handle it in SSIS?
I have found no information for such situation.
Anybody have any idea about it.
Bhakti
View 2 Replies
View Related
Oct 3, 2007
Hi,
i have a package that uses a ForEach loop component to import flat files, and uses an OLE DB Destination component to insert the data into some staging tables (using table fast load with a max insert commit of 1000 rows), the biggest individual table import would be circa 5000 rows. At the end of each file import a stored proc is called to transfer the data into production tables, then the next file is imported.
Periodically (when importing more than 5 or 6 files) the process fails with the error message:
The transaction log for database 'blah' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
This occurs when committing the data to staging. I do not start any transactions during this process, and the staging tables are cleaned out by truncating them, so i'm not sure exactly what is causing the log file to fill up (i'm not a DBA).
I know this is not specifically a SSIS problem, but can anyone give me a suggestion about the best way to handle the log file during an SSIS import? Should i execute a DBCC SHRINKFILE before each flat file is imported? Is there some other approach i should be taking to either insert the data or to move it from staging to production?
Thanks!
View 3 Replies
View Related
Jun 21, 2001
I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."
How can i capture this error without having the script fail? Is there another way to get this done?
Thanks,
Jim
View 1 Replies
View Related
Nov 23, 2005
Hi guys,Got a problem now :( please help...now we got a project handling records saved in a table in a sql2000(will upgraded to 2005 soon) server. every month around a millionrecords will be inserted.now user raised a request, that is, once criterios are matched, theproject should do some backend handle, for example, ifSELECT colID, fieldC, fieldD FROM dataTable WHERE fieldA ='fieldA_valueB'returns some recordset, for each @fieldC, @fieldD we shall do someback-end trick, maybeUPDATE dataTable SET fieldE = 'fieldE_valueF' WHERE fieldC = @fieldCAND fieldD = @fieldDlet's say such a rule is named as rule01. Hope I'm expressing theproblem clearly?my questoin is, shall we do this in Database side, using triggers, orby informing our .net project to do it?1. since the records are coming around 1 millison per month, how can wehandling the performance issue?2. now the rules are still somewhat simple, seems at least we could doit by EXEC or SP_EXECUTESQL. but rules may turn quite complex, forexample, audit log, or more complex issues, shall we do it in .netprogram? but how can a trigger in SQL database informing a .netprogram, or webservice, or windows service? by executeing an executableconsole program?3. user may raise more and more rules, how could we provied a flexiblesolution? i mean we're trying to build it less hard-coded. seems in sqldatabase EXEC or SP_EXECUTESQL are still somewhat flexible, while in..net to do something like eval() in javascript or EXEC in sql server isa little bit troublesome. but, put all these bussiness logic in storedprocedure sounds a little bit weired.guys, hope i have made myself clear. any suggestion? Thanks very mcuhyours,athos.
View 7 Replies
View Related
Mar 28, 2007
Hi, Ive got a report using a List item that is vertically displaying the columns from a table. The problem I run into, is that some of the fields in this table contain large blocks of text where the users have entered comments and such.
I am using Textboxes to display this data.
So my report will look something like
-----
Field label 1 Field value 1
Field label 2 Field value 2
Field label 3
<white space>
<page break>
Field value 3 ---> this is a big block of text
Field label 4 Field value 4
etc
------
It appears as though the report attempts to keep the contents of each textbox together even if that means breaking onto an entirely new page to do this. I would prefer for the data to flow more natrually instead where the page breaks in the middle of the data being displayed should it be too large to fit on the page it started on.
-----
Field label 1 Field value 1
Field label 2 Field value 2
Field label 3 Field value 3 --- As much as can fit on this page
<page break>
Field value 3 ---> remaining data that broke over the page
Field label 4 Field value 4
etc
------
Any suggestions would be apprecaited.
View 3 Replies
View Related
Apr 11, 2008
hello All,
I have a flat file which has a column (length of 24) . Whenever I have that column more the 24 char length, my package failed. I would like to know if there is any way if I can continue my package in this situation and send my bad row to the output table?
Any help will be appreciated.
Thanks
View 2 Replies
View Related
Aug 6, 2007
HI,
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario:
--------------
I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
Thanks ,
Sunil
View 7 Replies
View Related
Jun 23, 2006
Hopefully this is an easy question:
Inside of a for each loop (looping through an ADO record set of objects to import) I have a data flow task (along with many other processes).... if the dataflow task suceeds I log success in a table. If it errors I want it to fail the dataflow task (which will fire off my Event Handler for that data flow and log the failure, email etc) BUT I want it to continue the loop - I can't seem to figure out how to get the data flow object not to fail the whole loop. If any other objects inside the foreach, other than the data flow, fail I would like the whole loop to fail. Also if possible (but not a requirement) I would like it to have a threshold where if the data flow fails X variable times it will fail the package.
I am having difficulty how to not fail the loop when the import data fails..... just looking for a simple "on error next" type logic for that specific object in the foreach but not the rest. Thanks in advance for the help/advice.
View 4 Replies
View Related
Sep 11, 2007
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
exec usp_Inert_Registration_Episodes_Assessments
@Unique_ID=?,
@Gender_Cd=?,
@Birth_Date=?,
@Race_Ind=?,
@Ethnicity_Cd=?,
@Registration_Dt=? ,
--
--@Object_Key
View 16 Replies
View Related
Aug 5, 2015
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
View 5 Replies
View Related
