Havin Trouble Inserting Records To A Table.. Update Works Fine
Mar 6, 2008
Hi..
I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc..
IF Exists(
SELECT
*
FROM
PlanEligibility
WHERE
PlanId = @PlanId
) BEGIN
UPDATE
PlanEligibility
SET
LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,
EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End,
EntryDates = @EntryDates,
EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM,
LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END,
OtherEmployeeExclusions = @OtherEmployeeExclusions
WHERE
PlanId = @PlanId
END
ELSE BEGIN
INSERT INTO PlanEligibility
(
PlanId,
LengthOfService,
EligibilityAge,
EntryDates,
EligiDifferentRequirementsMatch,
LengthOfServiceMatch,
EligibilityAgeMatch,
OtherEmployeeExclusions
)
VALUES
(
@PlanId,
Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,--@rsLengthOfService,
CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge,
@EntryDates,
Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here
CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch,
@OtherEmployeeExclusions
)
END
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
I have a report problem. I'm using a parameter to dynamically control visibility for two tables. If the parameter is set to one value, I want to switch one of the tables to invisible, if the parameter is set to another, I want the other table to be invisible instead.
This all works fine in Visual Studio. When I publish it to my report server, the visibility controls no longer function and both tables always display. Any ideas here?
Ok, I'm really new at this, but I am looking for a way to automatically insert new records into tables. I have one primary table with a primary key id that is automatically generated on insert and 3 other tables that have foreign keys pointing to the primary key. Is there a way to automatically create new records in the foreign tables that will have the new id? Would this be a job for a trigger, stored procedure? I admit I haven't studied up on those yet--I am learning things as I need them. Thanks.
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22 Code: 0xC0202009 Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle. I have oracle 9i client installed on the server and sql server is 2005.
I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.
Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.
Hi, I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:24:30 AM Error: 2008-03-18 09:24:32.54 Code: 0xC0202009 Source: IMALCRM Connection manager "IMAL SRC" Description: An OLE DB error has occurred. Error code: 0x800703E6. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H result: 0x800703E6 Description: "Invalid access to memory location.". End Error Error: 2008-03-18 09:24:32.54 Code: 0xC020801C Source: Load Fund Detail V_FUND_DETAIL [16] Description: The AcquireConnection method call to the connection manager "IMA L SRC" failed with error code 0xC0202009. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0047017 Source: Load Fund Detail DTS.Pipeline Description: component "V_FUND_DETAIL" (16) failed validation and returned er ror code 0xC020801C. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC004700C Source: Load Fund Detail DTS.Pipeline Description: One or more component failed validation. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0024107 Source: Load Fund Detail Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:24:30 AM Finished: 9:24:32 AM Elapsed: 2.078 seconds
If this post belongs somewhere else I appologize. I have spent several days trying to solve this problem with no luck. My site is online. Hosted at NeikoHosting. I can connect to the database remotely when adding a datacontrol. It tests fine. But when running the page it won't connect. Even if I go in and change the Web.Config connection string to a local Data Source provided to me by Neiko, it still won't work. It just won't connect. Here are the two connection strings in the Web.Config, minus my login info: Only the remote string will pass testing. Neither works on the site. <add name="yourchurchmychurchDBConnectionString" connectionString="Data Source=MSSQL2K-A;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" /> <add name="yourchurchmychurchDBConnectionString2" connectionString="Data Source=66.103.238.206;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" /> Here is the stack trace, if that helps. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
My DTS Package work fine if I Execute it manually, but I need to do it automatically just after midnight. I defined my schedule and made sure the job was present in the SQL Server Agent>Jobs, but it fails and the Job History shows the following error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1901 (76D) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone where contact.phone_num is not null and contact.status = 'New Contact' group by contact._id order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin declare @current_date datetime set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from ( ( select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min" from topcat.class_contact where status ='callback' and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) and (DATEPART(hour, callback_date) <> 0) order by callback_date asc --order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc ) union ( select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency from topcat.class_contact where status = 'callback' and callback_date is not null and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) and (DATEPART(hour, callback_date) = 0) order by callback_date asc ) union ( select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency from topcat.class_contact where status = 'No Connect' and callback_date is not null and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) order by callback_date asc ) union ( select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone where contact.phone_num is not null and contact.status = 'New Contact' group by contact._id order by "recency" desc, "frequency" desc ) ) contact_queue order by priority desc, recency desc, callback_date asc, frequency desc
I have a report which has multivalue parameters enabled and If i give NULL it displays everything correctly. But if I give different ClientId it doesnt do it in the report.. But if i run my sproc in VS2005 and in ssms it works the way i want it. this is my sproc
Code Snippet set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@StartDate datetime, @EndDate datetime, @ClientId nvarchar(max)= NULL AS Declare @SQLTEXT nvarchar(max) if @ClientId is NULL BEGIN SELECT o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --cp.ClientId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId -- and o.CreatedByUserId = cp.UserId Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE --cp.ClientId = @ClientId --AND o.OrderDate BETWEEN @StartDate AND @EndDate ORDER BY o.OrderId DESC END ELSE BEGIN SELECT @SQLTEXT = 'Select o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --cp.ClientId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId --AND cp.ClientId in ('+ convert(Varchar, @ClientId) + ' ) Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE cp.ClientId in (' + convert(Varchar,@ClientId) + ') AND o.OrderDate BETWEEN ''' + Convert(varchar, @StartDate) + ''' AND ''' + convert(varchar, @EndDate) + ''' ORDER BY o.OrderId DESC' exec(@SQLTEXT) END --return (@SQLTEXT)
I have 2 datasets in this report one for the above sproc and other dataset that gives me the clientname and it is as follows
Code Snippet
ALTER Procedure [dbo].[usp_GetClientsAll]
@ClientId nvarchar(max) = NULL
AS
--Declare @ClientId nvarchar(max)
SELECT
NULL ClientId,
'<All Clients >' ClientName
FROM
Client
Union
SELECT
ClientId,
ClientName
FROM
Client
Where
ClientId = @ClientId
OR
(
ClientId = ClientId
OR
@ClientId IS NULL
)
In the first dataset Parameter list i have omitted ClientId but kept it in the report parameter.. So when i give select all it works.. but when i just select particular it gives me the same result as Select all..
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.
The error that I'm getting is this:
[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.
[rsNone] An error has occurred during report processing.
Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!
We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.
Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).
If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.
This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....
What is this. ....is it our QUERY, index or huge Transactions or no free space ???
We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?
Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????
Hey I had a table with a column of data encrypted in a format. I was able to decrypt it and then encrypt it using Symmetric keys and then updating the table column with the data. Now, there is a user sp which needs to encrypt the password for the new user and put it in the table. I'm not being able to make it work. I have this so far. Something somewhere is wrong. I dont know where. Please help Thanks. I used the same script to do the encryption initially but that was for the whole column. I need to see the encrypted version of the @inTargetPassword variable. But it's not working. It doesn't give me an error but gives me wrong data...
People,I'm trying to publish my first website and am having a few problems.I've got Visual Web Developer 2005 Express and am trying to use the Personal Website Starter Kit. (my SQL server is SQL Server Express Edition 2005 - which is also running on my local machine)It seems to work fine when I run it on my localhost, as soon as I ftp it up to my web hosting company, I get an error message (see below) :-An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) My hypothesis is :-It would appear to me that when running locally, the starter kit website uses my installation of SQL 2005 Express Edition, but when I upload all the files, I'm guessing the application is still trying to point at a local instance of SQL on my local PC which it now cannot see. I'm guessing I need to somehow upload the SQL database onto my web host (I've purchased 100M of SQL Server 2005 space), and point the application at that SQL instance instead. But I don't know if I'm right about all this, or indeed how to do it if I am. Can anyone help?Much thanks in advance,Will
works fine in designer but when i load the report services I get the following error anybody know what to do there is one subreport with this report maybe the passing value but what could be wrong ????
Item has already been added. Key in dictionary: '9' Key being added: '9'
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.
I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.
/* Update WeekEnding Date for current weeks WeeklySales Records */ Update WeeklySalesHistory set weekendingdate = (SELECT LastTransDateTime from ReplicationControl where TableName = 'WEEKHST') where weekendingdate is null
Weekly sales has approx 100,000,000 rows Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.
I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.
One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.
The user permissions are set the same in both 2000 and 2005 can you please explain what changed and what are the minimum permissions need for the user to be able to make these changes to the temporary table which the user created.
This program gets the values of A and B passed in. They are for table columns DXID and CODE. The textbox GET1 is initialized to B when the page is loaded. When I type another value in GET1 and try to save it, the original initialized value gets saved and not the new value I just typed in. A literal value, like "222" saves but the new GET1.TEXT doesn't.
We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Hello I am receiving the dreaded mail error listed above. I can send out a test E-mail from Enterprise Manager to operators, but I cannot run this Transact query:
I have been fighting this problem for several days now.
All I need to do is run a query against a table on mssql 2005 server and update a table (only update) in Oracle
Here are some of the things I have tried:
1) from a forum tip, I set up a dataflow: OLE DB Source (MS SQL) -> Derived Column -> OLE DB Command (Oracle)
- I get "Error at Data Flow Task [OLE DB Command [2850]]: Columns "NyNamn" and "id" cannot convert between unicode and non-unicode string data types."
2) I have tried a Source - OLE DB Source (MS SQL) -> Derived Column -> OLEDB Desination (Oracles OLEDB)
- Error when trying to preview: TITLE: Microsoft Visual Studio ------------------------------ Error at Data Flow Task [OLE DB Destination [2953]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF. Error at Data Flow Task [OLE DB Destination [2953]]: Opening a rowset for ""APPINV2"."OWNERS"" failed. Check that the object exists in the database.
------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
3) I have tried a Source - OLE DB Source (MS SQL) -> Derived Column -> OLEDB Desination (MicrosoftsOLEDB for Oracle)
- Error when trying to preview: TITLE: Microsoft Visual Studio ------------------------------ Error at Data Flow Task [OLE DB Destination [2953]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Unspecified error". An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.". An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Data type is not supported.". Error at Data Flow Task [OLE DB Destination [2953]]: Opening a rowset for ""APPINV2"."OWNERS"" failed. Check that the object exists in the database.
------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
I have full rights on the oracle database with the account used, i can connect with toad with no problems.
To me, this should be a simple task. has anyone got any advice for me ?
I'm new to the whole DB thing so I wanted to start off easy and download SQL Express. That part worked fine so I tried to install the Adventure Works DB to get some practice using the SQL commands. The problem is every time I click on a table in Adventure Works and choose Open Table I get a Microsoft SQL Server Management Studio box that pops up. The error says: Class Not Registered (Exception from HRESULT: 0x80040154 REGDB_E_CLASSNOTREG))
(Microsoft.SqlServer.SqlTools.VSIntegration)
Help!! Any ideas out there how to get the Adventure Works DB working? Thx much.
Hi.. I really need a help. Is there any way to insert multiple records into a table in one go?
I have a table named Fruit. It contains FruitId,OwnerId,Colour
The list of colour is got from another table name FruitColour. FruitColour Consists of 2 column, FruitName and Colour.
Is it possible to insert multiple records into Fruit table with one query if only the colour is changed.
Sample case I have an Apple. Fruit id=2 OwnerId=2 Colour -- > Select Colour From FruitColour where FruitName='Apple' (Will return multiple records)
I tried to insert using this query: Insert into Fruit(FruitId,OwnerId,Colour) Values (2,2,Select Colour from FruitColour where FruitName='Apple').
Gives me this error Subqueries are not allowed in this context. Only scalar expressions are allowed.
I need to do this because actually I am inserting multiple fruit at one time, and each have multiple colour. If I need to insert the colour one by one for each fruit it will takes a very long time.
Any suggestion are welcomed. Thank you in advanced.
1 john john smith smith 1 john j smith smith 1 john jon smith smit
I want to be able to insert all the records from the result set into another table, like in the eg, but only excluding those ones that match all the above fields. How would I do this...
I need help with this. When I run the below script (only select) it retrives around 130K records and gives me the output within 2 mins. Whenever I try to put the same output in a temp or permanent table it takes hours. Any Idea why?
SET NOCOUNT ON
DECLARE @ImportId INT SET @ImportId = 5151
DECLARE @ResultXML XML SET @ResultXML = (SELECT ResultXML FROM tbRequests WITH(NOLOCK) WHERE ImportId = @ImportId)
SELECT resultNode.value('(./DealName)[1]','VARCHAR(200)') AS DealName, resultNode.value('(./CUSIP)[1]','VARCHAR(100)') AS CUSIP, CASE WHEN resultNode.value('(./Vintage)[1]','VARCHAR(100)') = '' THEN NULL ELSE resultNode.value('(./Vintage)[1]','INT') END AS Vintage, resultNode.value('(./PoolPoolType)[1]','VARCHAR(100)') AS PoolType, CASE WHEN resultNode.value('(./PaidOff)[1]','VARCHAR(100)') = '' THEN NULL ELSE resultNode.value('(./PaidOff)[1]','BIT') END AS PaidOff FROM @ResultXml.nodes('./WebService1010DataOutput') resultXml(resultXmlNode) CROSS APPLY resultXmlNode.nodes('./Results/Result') resultNodes(resultNode)
INSERT into #TResults (DealName,CUSIP,Vintage,PoolType,PaidOff) SELECT resultNode.value('(./DealName)[1]','VARCHAR(200)') AS DealName, resultNode.value('(./CUSIP)[1]','VARCHAR(100)') AS CUSIP, CASE WHEN resultNode.value('(./Vintage)[1]','VARCHAR(100)') = '' THEN NULL ELSE resultNode.value('(./Vintage)[1]','INT') END AS Vintage, resultNode.value('(./PoolPoolType)[1]','VARCHAR(100)') AS PoolType, CASE WHEN resultNode.value('(./PaidOff)[1]','VARCHAR(100)') = '' THEN NULL ELSE resultNode.value('(./PaidOff)[1]','BIT') END AS PaidOff FROM @ResultXml.nodes('./WebService1010DataOutput') resultXml(resultXmlNode) CROSS APPLY resultXmlNode.nodes('./Results/Result') resultNodes(resultNode)
Godwin writes "Hello, Heres my question.. I have 2 tables.2 paticular columns exist in both the tables. I want to be able to select those 2 columns on the 1st table and insert them on to the same 2 columns on the 2nd table.
Now,this 2nd table has another 3 columns that exist in another table.I would like to take those 3 column values from that 3rd table and insert it into the 2nd table by modifying those existing records in the 2nd table.In the 3rd table,there will be around 5 records...I want to copy the existing records 5 times in the 2nd table and insert the 3rd tables rows inside the 2nd table in that respective column for 5 rows.
I hope you understand what I mean...Im sorry for really confusing.. Please help me Thanks Godwin"
I've got a popular problem so i get a message that server acces denied! ..
But that what is different in my error.... When i use same setting same database and connection string (on MSDE server) there is no problem...
On SQL server i have got windwos authentication but i added all accounts as ASPNET and SA.... and when i try to connect by
RETTO - name of my server
server=RETTO;uid=sa;pwd=password;database=db1; or by Integrated Security=SSPIserver=RETTO;uid=RETTOASPNET;database=db1;
I CAN BROWSE RECORDS THERE ARE NO PROBLEMS WITH CONNECTION!!! but when i try to update or iinsert or delete something in database there becomame this error that access denied or server does not exist!!!
PLEASE HELP I'm FIGHTING WITH THAT FOR OVER 5 DAYS!!!
I MADE FOR MY ACCOUNTS (SA, ASPNET) ALL THINGS ALLOWED AS EXECUTING stored procedures.. OR ACCESING datatables with insert delete and update query WHERE IS THE PROBLEM!!!??
I have a report that was designed using SQL Reporting Services that sits on a SQL reporting server. It's nothing too exciting, it is essentially a three page application with legal jumbo on pages 2 and 3 and applicant data in fields on page 1.
We use rectangles to force page breaks to page 2 and to page 3.
When running the report on the report server, it shows and prints fine.
When running the report from the QA website internally, it shows and prints just fine.
When running the report from the production website from a machine internally, it shows and prints just fine.
When running the report from outside of the company network, the report is jacked. It obliterates large chunks of text, crams text together, and creates blank pages.
I need help in determining where I even begin with trouble shooting this!
