Not 100% sure I'm doing this correctly in the first place but I have an orders table that has a FK back to the employee that processed the order and the time it was ordered. What I'd like to do is get the most recent order for each employee but this seems to be escaping me... I tried something like.
SELECT Employee, MAX(OrderDate) FROM Orders GROUP BY Employee
This works all fine and dandy but I need to get other data from the most recent row.
Hi, I am having trouble getting my query right. i am using a stored procedure to retrieve this data and bind it to my grid view. Problem: I can't associate a field with a column that i am returning with my record set. Details: I have query that i want to return 9 columns (UserName, Pre-Approved, Processing, Underwriting, Conditioned, Approved, Docs Out, Docs Back, Conditions Met). The username column lists all loan agents. I want the other 8 columns to list the name of the borrower (crestline..borrower.lastname) that is associate with that loan agent and that loan state. Each time a record is found where there is a valid loan agent (UserName) that meets the 'where' conditions, there will be a borrower. the 'LoanKey' field is a primary key that lets me get the borrower name from the borrower table. I dont know how to construct my query such that those borrower names get associated with their respective column header. if the query works, my Gridview should look like this ('Name' refers to the borrower name) UserName | Pre-Approved | Processing | UnderWriting | Conditioned | Approved | Docs Out | Docs Back | Conditions Met Bob | | | | Name | | | | Bob | | Name | | | | | | Bob | | | | | | | Name | Steve | | | Name | | | | | Steve | | | | | | Name | |
Here is my sql call: SELECT cfcdb..users.username, crestline..borrower.lastname,CASE WHEN crestline..loansp.LoanStatus='Pre-Approved' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Pre-Approved',CASE WHEN crestline..loansp.LoanStatus='Processing' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Processing',CASE WHEN crestline..loansp.LoanStatus='Underwriting' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Underwriting',CASE WHEN crestline..loansp.LoanStatus='Conditioned' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Conditioned',CASE WHEN crestline..loansp.LoanStatus='Approved' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Approved',CASE WHEN crestline..loansp.LoanStatus='Docs Out' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Docs Out',CASE WHEN crestline..loansp.LoanStatus='Docs Back' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Docs Back',CASE WHEN crestline..loansp.LoanStatus='Conditions Met' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Conditions Met'FROM cfcdb..usersinner join (crestline..loansp inner join crestline..borrower on crestline..loansp.loankey = crestline..borrower.loankey)on crestline..loansp.fstnamelo=cfcdb..users.firstname AND crestline..loansp.lstnamelo=cfcdb..users.lastnameinner join cfcdb..users_roleson cfcdb..users.username = cfcdb..users_roles.usernamewhere cfcdb..users.active = 1 AND cfcdb..users_roles.groupid = 'agent'AND crestline..loansp.enloanstat <> 'Closed' AND crestline..loansp.enloanstat <> 'Cancelled' AND crestline..loansp.enloanstat <> 'Declined' AND crestline..loansp.enloanstat <> 'On Hold'order by cfcdb..users.username asc
Let me first describe my report: I have the following table
Header Group 1 row--There is a textbox that in this row that when toggled makes visible the two below group 1 rows and the detail row. Group 1 row Group 1 row Detail row Group 2 row-- This row has a textbox that can hide the below group 2 row. Group 2 row-- This row contains a subreport.
Currently, I have a parameter that allows the user to conditionally collapse or show the tables' information for printing purposes so the user doesn't have to go through and click on so many plus signs. My problem is I would like to use a parameter to conditionally hide both of the Group 2 rows so that the user cannot view or click on them. The information in Group 2 is extra and not always needed, so I would like to provide the user with a way to hide this information when they go to view the report. However, I imagined this would be easy enough. I went to group2's visibility tab through the table interface and set the expression to "=IIF(Parameter!ShowIndexes.Value, FALSE, TRUE)". However, when I view the report the report is hiding the detail information as well as the Group2 rows.
I am really new to SQL Server. I have trying to create/register a server. I came to know that I need to go to Query Analayser and then register a Server. Then in Enterprise Manager I need to register a Group. I did everything.
But...
Here is the error.
Unable to connect server. Server: Msg 17, Level 16, State 1
[Microsoft] [ODBC SQL Server Driver] [Shared Memory]
SQL Server does not exit or access denied.
I really appreciate if u can give me steps. Thanks, Padma.
I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
I've posted a feedback with Microsoft to see if we can get them to fix the issue described below, but so far no one from Microsoft has commented to let us know what they're doing about this problem! I'm posting this here to see if maybe we can get more people to rate this feedback or chime in on what a pain it is! Please feel free to add your own comments or how you had to work around this issue and whether or not you think this is something Microsoft should be addressing NOW.
Provide Individual Page Numbering per Group and Total Pages per Group
Currently in a Reporting Services report, you can't readily reset the page number for each group in a table, nor can you display the total number of pages per group. For example, if I'm printing invoices and each invoice is a separate group, I'd like to be able to print "Page 1 of 5" , "Page 2 of 5" etc. for the first invoice, then "Page 1 of 3" when the next invoice begins, and so on. This was easy in Crystal Reports. I realize that Crystal Reports has a two-pass process that enables that kind of pagination. However, this is REALLY important functionality that's just missing from Reporting Services and I'm hoping you'll provide it REALLY SOON! Yeah, I know there are work-arounds if you can know exactly how many rows of information there are on each page. But gosh! That's not practical, especially if you have second level groups inside the main group or text blocks in rows that can 'grow' to more than one line. I've read a couple of work-arounds, but none of them works correctly and consistently when more than one user is running the same report or when you print the report while you're looking at it on the screen. I still may need access to the overall report page number and the overall total number of pages, so don't get rid of that. It's just that if you're doing this already for the entire report, I don't see why you can't do it per group! Lots of people have been asking for this for years, and I don't understand why it hasn't been implemented.
I've read a few articles on this topic, but no one has come up with a decent work around. My theory is that Microsoft should be addressing this immediately. This is major functionality that's just plain missing from SSRS and should have been there from the start. If anyone from Microsoft can let us know what's going on with this issue or if anyone would like for me to clarify this further, feel free to let me know.
I have an SSRS report with groups that when exported to excel contains drill-in's (plus marks on left side). The issue I have is that for all the groups in the drill-in, those cells become merged. I want to keep the group drill-in but have the cells UNMERGED. I have heard this can be done with the RDL XML but I don't know what to modify to accomplish this.
I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:
Year Month Date
And the following row groups:
Region Product SubType (hidden, data at the date level is summed to Product)
At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)
select top 15 count(*) as cnt, state from table group by state order by cnt desc
[code[...
Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.
I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.
I have one domoain in the forest. The domain level is set to Windows 2000 native mode and forest level is set to mixed mode. My SQL server 2005 server joined to this domain. I added a brand new domain local group and add a normal user account to this domain local group. I login to the SQL server 2005 server and make a query "SELECT * FROM sys.login_token". I cannot see my domain local group in sys.login_token. However, if I add my account to a global group, I can see it there.
Then, I setup another forest. This time, I have domain level set to Windows 2003 mode and forest level is set to Windows 2003 native mode. I do the same testing. This time, I can see my domain local group in sys.login_token.
Why does SQL server 2005 has this limitation? Is it a bug?
HiI am new to SQL and am having a problem. I need to fix my query to do the following...2) get a total of the number of rows returned. DECLARE @StartDate varchar(12)DECLARE @EndDate varchar(12)DECLARE @Region varchar(20) SET @StartDate = '01/01/2002'SET @EndDate = '12/31/2008'SET @Region = 'Central' SELECTA.createdon,A.casetypecodename,A.subjectidname,A.title,A.accountid,A.customerid,A.customeridname,B.new_Region,B.new_RegionName FROM dbo.FilteredIncident AINNER JOIN dbo.FilteredAccount B ON A.customerid = B.accountid WHERE (A.createdon >=@StartDate AND A.createdon <= @EndDate)AND (B.new_RegionName = @Region)AND (A.casetypecode = 2)
I'm new to MSSQL 2005 and want to get a summary of a log table. I want to count all the rows for each date based on a DATETIME field called 'post_date' that holds the date and time of each record's creation.
this is the best I can come up with:
Code:
SELECT DISTINCT(LEFT(post_date,11)) AS post_date, COUNT(DISTINCT(LEFT(post_date,11))) AS total_posts FROM log_directory_contacts GROUP BY post_date
The results show each date but the count column ('total_posts') returns '1' for every row even when I know their are more than 1 record on that date.
I have a matrix with two row groups and one column group with about 6 items in it. I have about 2100 rows at the lowewst row group level. This report was built solely for excel export. The first row group has about 20 items and controls the visibility of the other group. When I toggle the visibility of the second row group, how can I make the the header of the first row group copy down for each row of the other row group? The first row group is the Section and the second is Mnemonic.
SELECT Node_ID,Day,Operation, AA,BB FROM (SELECT CASE WHEN Operation LIKE 'NOTIFY' THEN SUM(Total_request) ELSE 0 END AS AA, CASE WHEN OPERATION LIKE 'SEARCH' THEN SUM(Total_requests) ELSE 0 END AS BB,Node_ID,DAY,Operation
[code]....
So i want to make two columns by the name of operation. in the real code AA and BB are calculates with many counters. My code doesn't work, I have an error: "not a single-group group function" .....
Hi,I was hoping someone may be able to help me with a tricky T-SQLproblem.I need to come up with a SELECT statement that does basically thefollowing:Select RCRD_REFNO, MAX(MODIF_DTTM) as MODIF_DTTM from[StageDb].[dbo].tblPersonInfo group by RCRD_REFNOHowever, I need to select ONLY the TOP 1 of each group (i.e. only 1record for each unique RCRD_REFNO). The problem is of course that if Iadd 'top 1' after select, it only brings back 1 record full stop,rather than 1 for each group!Now, I have previously come up with a similar query that DOES do thissuccessfully, but it relies on a criteria (such as a unique identifier)-unfortunately, the nature of the table I'm using for this currentjob means that it actually doesn't have a primary key, as it'ssimply a staging area for raw data, and can even have completelyidentical records in it. I think the only way I'm going to be able todo it is to literally use the 'TOP' command somehow, but am notsure how to adapt the above to implement it...I'd be very gratefulfor any advice.Many thanks
Here is my Table Structure ( from Oracle database) Team | Customer Code | Amount | Credit Limit 1 , a, 100, 1000 1 , a , 200, 1000 1 , b, 100, 100 1, b, 1000, 100 1, b, 2000, 100 2, a, 100, 2000
For the Report, I want to group the Team and Sum each customer total Amount and Show the Exceed limit amount. Here I want to present Team Customer Code Amount Credit Limit Exceed 1 a 300 1000 0 1 b 3100 100 3000 Team Total 3300 3000 2 a 100 2000 0 Team Total 100 0 Total 3400 3000
BUT it turn out.. Team Customer Code Amount Credit Limit Exceed 1 a 300 1000 0 1 b 3100 100 3000 Team Total 3300 2300 ( Problem here a ) 2 a 100 2000 0 Team Total 100 0 ( Problem here a ) Total 3400 2400 ( Problem here b)
I Grouped the Custoer Code and Team I can preform the sum however I can't Do the Exceed total becoz the value should be iif (Sum(amount)>(Creditlimt) , Sum(amount)-First(Creditlimt), 0) but for the team total in team 1 the result is 2300 ( 3300 - customer a 's limit) not add from exceed amount And the finial total it turns out 2400 (3400 - 1000)
I have tried use the coding to sum up the exceed but I found that the group total is sumup first than the sum up the detail :
Team Customer Code Amount Credit Limit Exceed 1 a 300 1000 0 1 b 3100 100 3000 Team Total 3300 0 2 a 100 2000 0 Team Total 100 3000 ( The Total from Team 1 ! ) Total 3400 0 ( Problem here b)
this situration , I can't change the query statement I can do the good result for CR report but for reporting service 2005, I can't to the first report result Any one can help me ?? thank you
need to migrate a cluster with an AG dtabases to new data center cluster with AG.
I was wondering if is possible to do mirroring on top of the AG configuration? or what other options could be to migrate a cluster that has 3 nodes and setup the ag databases to a new datacenter.
partition with single file group or multiple file group which one best.
we have some report running from partition table, few reports don't have any partition Key and after creating 400 partition with 400 file group it is slow.what is best practices to crate 400 file group or single file group.
I just got finished developing the company intranet site and thinking that everything was working I boasted about how good it was by getting my boss to login and submit a new job to the db (new job, its a work management app) while i did the same, the pland was to hit the submit button at the same time. He would send one to be read by me and I would send one to be read by him. We both hit submit and the following happened.
The db has somehow fused the two into one. I thought maybe we were to accurate in hitting the submit button together. But I even gave a five second delay between and for some reason the job is being overriden by one user tor the other. In other words we are both sharing the same jobid. I thought this could never happen with sql server supposing that it would lock one request until another was completed and vice versa. But I'm so new to this that I'm just so naieve to think that the db would do this for you. Problem is I'm about to move on and I can't leave the app in this state. Can anyone point to some articles or give some suggestions has to my situation. Most desperately in need!!
i'm having touble getting my sp done. the problem is as follow..i've found an sp tokenize (which works fine) with the following signature:
CREATE PROCEDURE TOKENIZE ( S VARCHAR(10000), DELIM CHAR(1)) RETURNS ( ID INTEGER, TKN VARCHAR(10000)) AS DECLARE VARIABLE I INTEGER; DECLARE VARIABLE LEN INTEGER; DECLARE VARIABLE FIRSTCHAR CHAR(1); DECLARE VARIABLE S2 VARCHAR(10000); begin ... SUSPEND; end^
then i build myself another sp (which also works fine) with this signature:
CREATE PROCEDURE GET_DICENTRIES_BY_ASDSKRPT ( ASDSKRPTINPUT VARCHAR(15)) RETURNS ( ID BIGINT) AS begin ... suspend;
end^
now, what i'm trying to do is write another sp (get_dicentries_by_all_asdskrpts) that accepts a '.'-tokenized string as a parameter (e.g. 'bla.bli.blo.blu'; number of tokens NOT fixed at 4!) and returns the intersection of
GET_DICENTRIES_BY_ASDSKRPT('bla'), GET_DICENTRIES_BY_ASDSKRPT('bli'), GET_DICENTRIES_BY_ASDSKRPT('blo') AND GET_DICENTRIES_BY_ASDSKRPT('blu')
Could someone help me get the following SQL statement working?SELECTstandardgame.gamename,standardgame.rowteamname,standardgame.colteamname,standardgame.dollarvalue,standardgame.gameid,standardgame.cutoffdatetime,standardgame.gametype,standardgame.gameowner,(100-COUNT(purchasedsquares.gameid)) AS squaresremainingFROM standardgameLEFT OUTER JOINpurchasedsquares ON standardgame.gameid = purchasedsquares.gameidwhere gametype='$gametype' and dollarvalue = '$dollarvalue' andgameowner = 'GROUP BY standardgame.gameidorder byCASE squaresremaining WHEN 0 THEN 1 ELSE 0 END ASC,squaresremaining ASCThe problem is... MySQL doesn't seem to want to let me usesquaresremaining in that case statement since it's not an officialcolumn name. Any idea how I can reference squaresremaining in the casestatement?
am an ASP.net developer and i've stucked in a C# windows application ... and i am the linking part ... between the Database and my application ... in ASP i have a wizard that handles getting the data from the controls ... but is it the same in C# windows application ? am using VS2005 TeamSystem... and widows Vista(framework 3.0) .... and this query is getting executed and return 1 ... and the intellecence is telling me to insert 4 strings
int rowseffected = loginNamesTableAdapter.InsertQuery(textBox1.Text.ToString(), textBox2.Text.ToString(), textBox3.Text.ToString(), textBox4.Text.ToString()); MessageBox.Show(rowseffected.ToString()); i don't know how to link the parameters with the controls ... please show me how ... thx... please help with images ... as i previously mentioned... this is a new experment in C# thx.
Using Vs2005 sqlServer 2005 When i try to connect i get this error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Connection string: <connectionStrings> <add name="pubsConnectionString1" connectionString="Data Source=.;Initial Catalog=pubs;User=mk;pw=x" providerName="System.Data.SqlClient" /> </connectionStrings> Calling code : try { using (SqlConnection cn = new SqlConnection(WebConfigurationManager.ConnectionStrings[0].ConnectionString)) { cn.Open(); } } catch (Exception ex) { Response.Write(ex.Message); }
I have a table adapter query with a like clause that I can't get to work. The field is "Type", so I have "LIKE '%@Type%'". When I click the Execute Query button to test, not only does nothing get returned, I don't get the chance to enter the parameter. If I change LIKE '%@Type%' to say, LIKE '%book%', the appropriate records are returned. I actually need to check two parameters. If I ad the second parameter, the where clause becomes(Type LIKE '%@Type%') AND (SendState = @SendState)When I test the query, a screen pops up to let me enter the state, but not the Type. I can't see anything wrong with the query, but something must be. Diane
I am having a most frustrating time getting this working. I have two machines, one named 'REMOTE' and it contains my SQL Server (2005 developer edition). Then I have my main PC, named 'DOUGAL' The server instance on the REMOTE computer is called 'SQLSERVER' and there is only one instance. The server is showing as running etc and I can log in locally on the REMOTE computer easily via the Microsoft SQL Server Management Studio etc. I have two logins that are working fine, sa and a login called 'db_user'.Now I am trying to connect in the server explorer in visual studio. When I try and connection i get the following error; An Error has occured while establishing a connection to the server. When connectiong to SQL Server 2005 this failure may be caused by the fact that under the default settings SQL server does not allow remote connections. (provder: Named Pipes Provider, error: 40 - Count not open connection to SQL Server). I have tried connection to 'REMOTE/SQLSERVER' 'REMOTE' and with its IP address to - without any luck. So, to fix this problem I have checked that remote connections are allowed (and restarted the system). I have also checked that named pipes and tcp/ip connections are enabled. I have searched around with the aid of my best friend, Google. However, I've only found suggestions that involve trying the fixes I already tried.
Ok, what I am tryin to do is quite simple i do believe. Basically I have an aspx page with a textbox, a button and a datagrid linked to my sql db. What I am wanting is for a user to enter in their Social Security Number in the text box and click the button. If the SSN matches a record in the DB then it binds to the datagrid and shows it, IF no match is found then it displays a link to click on to continue onto the next page. This is to stop duplicate entries. I can get one to work by itself but not both of them at the same time. Here is my code.<%@ Page Language="VB" %><%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %><script language="VB" runat="server"> Sub btnSearch_OnClick(sender as Object, e as EventArgs) Dim objConnection As SqlConnection Dim objCommand As SqlCommand Dim objAdapter As SqlDataAdapter Dim objDataSet As DataSet Dim strSearch As String Dim strSQLQuery As String ' Get Search strSearch = txtSearch.Text ' If there's nothing to search for then don't search ' o/w build our SQL Query and execute it. If Len(Trim(strSearch)) > 0 Then OK, Here is my first IF, this works. ' Set up our connection. objConnection = New SqlConnection("Data Source=BRADBLACKBUR-PCMSSMLBIZ;" _ & "Initial Catalog=Victorypoint;Integrated Security=True;") ' Set up our SQL query text. strSQLQuery = "SELECT FirstName, LastName, SSN " _ & "FROM Applicants " _ & "WHERE SSN LIKE '%" & Replace(strSearch, "'", "''") & "%' " _ & "ORDER BY SSN;" ' Create new command object passing it our SQL query ' and telling it which connection to use. objCommand = New SqlCommand(strSQLQuery, objConnection) ' Get a DataSet to bind the DataGrid to objAdapter = New SqlDataAdapter(objCommand) objDataSet = New DataSet() objAdapter.Fill(objDataSet) If objDataSet.Tables.Count < 1 Then Right here is where I am having the problem, I need to count the Rows not the Tables, but I dont know what code i should use here. Button1.Visible = True Else ' DataBind DG to DS dgSearch.DataSource = objDataSet dgSearch.DataBind() objConnection.Close() End If End If End Sub
I've tried to post this somewhere else, but I haven't gotten it figured out yet: I'm passing variables through a URL, and the page that accepts the variables has a where clause like this:"WHERE (name1 LIKE @name1 + '%') and (property_add like @property_add + '%') and (ctlmap = @ctlmap )"On the search page where the variables are entered, the user may not know all the information that goes into each input field. (If the user just knew the name, they would search by name. If the user just knew the address, they would search by address...etc.) Everything works great before I add the ctlmap variable. When the ctlmap variable is added, no search results will turn up unless there is an entry made to the ctlmap field. I know it has to have something to do with the ctlmap being set to equals rather than like, but I can't find a way to make the search work with a null value for ctlmap. Thanks, everyone. Additional Info: <SelectParameters> <asp:QueryStringParameter ConvertEmptyStringToNull="False" Name="name1" QueryStringField="name" Type="String" /> <asp:QueryStringParameter ConvertEmptyStringToNull="False" Name="property_add" QueryStringField="address" /> <asp:QueryStringParameter ConvertEmptyStringToNull="False" Name="ctlmap" QueryStringField="ctlmap" /> </SelectParameters> Here's another type of where clause that I tried but had no luck with: WHERE (name1 LIKE @name1 + '%') and (property_add like @property_add + '%') and (@ctlmap IS NULL or @ctlmap = ctlmap) This is how I would try to do it in php/mysql, but I don't know how to make it work in asp.net/sql: if ($ctlmap != "") { $whereClause = $whereClause." and ctlmp = '".strtoupper($ctlmap)."' "; } if ($whereClause != "") { $whereClause = " where ".$whereClause; }Here's the MYSQL counterpart:$sqlString = "Select distinct district, map, bill_group, ctlmap, bill_parcel, propertyid, special, property_add, name1 from MUR_bill_master".$whereClause";
