I have a list with a few text boxes in it. It sort of looks like this:
Reports
Report: <Name>
Narrative: <Description>
"Reports" is supposed to be like a header for the list. Then it lists the report name and description for each report record returned from the query. My issue is that I need to repeat that "Reports" header at the top of every page.
I would use a table (and was using a table before) but I found that the narrative field holds a TON of characters (it's a varchar(max) in the database). With a table, the narrative wouldn't show a little on the first page and then go to the second page. What would happen is that the narrative field would jump to a new page if it all couldn't fit on the first. Using a list solves this problem and allows the text box to break up the text.
Only now I lost a way to have a header like I can in a table...
I want to display a phone directory by department.
I created a list and told it to group on department and then I put a table in the list that had PhoneNo, EmployeeName as the columns.
Now the list works in that it seperates that table out by department (so 5 departments means 5 instances of the table with a text box above the table but inside the list with DepartmentName.Value).
The problem though is that text box only appears once for each table, the first time the table is generated. I can't get the department name to display at the start of each page.
Do I need another sublist or something, how can I get the department name textbox to appear at the start of each page for my list?
So what I have is: DEPARTMENT NAME: Sales ---(table starts here) .............5555...Smith .............lots more names....... - - - - - - - - - - - - - - - PAGE BREAK - - - - - - - - - - ---(table continues on from last page...) .............4444...Johnson .............3246...Benson ---(table ends here) ------------------------------------new iteration of this, so the next department is IT and this all repeats again
What I want to get is:
DEPARTMENT NAME: Sales ---(table starts here) .............5555...Smith .............lots more names....... - - - - - - - - - - - - - - - PAGE BREAK - - - - - - - - - - DEPARTMENT NAME: Sales (this is repeated as it is the start of a new page, in a perfect world I'd be able to even say "Continued..." after the department name on all pages that were not the first page it appeared) ---(table continues on from last page...) .............4444...Johnson .............3246...Benson ---(table ends here) ------------------------------------new iteration of this, so the next department is IT and this all repeats again with department name at the start of each and every page
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
I have a report that I created and the report was working until I added some fields to a group footer row in a table.
My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.
What happened to the rest of the data?
All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
In above format:15-10 means Oct 15, 15-09 means Sept 15I am getting issues while formatting this in SSRS.I need SSRS table headers to be dynamic. I need that it should be according to the sql table header...The table header should change according to the sql query
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like: List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
Ok, I want to write a stored procedure / query that says the following: Code: If any of the items in list 'A' also appear in list 'B' --return false If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF (SELECT values FROM tableA) IN(SELECT values FROM tableB) Return False ELSE Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns." How can I do this?
Insert Query: insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE) SELECT DISTINCT tri_IDENT.IDA AS PPID, tri_Ldg_Tran.CLM_ID AS PTicketNum, tri_ClaimChg.Line_No AS PLineNum, tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT' THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate, tri_Ldg_Tran.Tran_Date AS PEntryDate, tri_ClaimChg.Hsp_Code AS PHCPCCode, tri_Ldg_Tran.Adj_Type, tri_Ldg_Tran.PRS_ID, tri_Ldg_Tran.Create_Time, tri_Ldg_Tran.Adj_Group, tri_Ldg_Tran.Payer_ID, tri_Ldg_Tran.TRN_ID, tri_ClaimChg.Primary_Claim, tri_IDENT.Version FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc = qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN tri_Ldg_Tran RIGHT OUTER JOIN tri_IDENT LEFT OUTER JOIN tri_ClaimChg ON tri_IDENT.Pat_Id1 = tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID = tri_ClaimChg.PRS_ID AND tri_Ldg_Tran.Chg_TRN_ID = tri_ClaimChg.Chg_TRN_ID AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN tri_Payer ON tri_Ldg_Tran.Payer_ID = tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type = tri_Ldg_Tran.Pay_Type AND qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg') AND (tln_PaymentTypeMappings.PTMClientCode = 'SR') AND (tri_ClaimChg.Primary_Claim = 1) AND (tri_IDENT.Version = 0)
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2 Windows Server 2003 1GB Ram....(I know, I know)
TIA
Code Snippet GO CREATE TABLE [dbo].[Tokens]( [TokenID] [int] IDENTITY(1,1) NOT NULL, [Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED ( [TokenID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens] ( [Token] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE FUNCTION [dbo].[SplitTokenList] ( @TokenList varchar(max) ) RETURNS @ParsedList table ( Token varchar(255) ) AS BEGIN DECLARE @Token varchar(50), @Pos int SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ',' SET @Pos = CHARINDEX(',', @TokenList , 1) IF REPLACE(@TokenList , ',', '') <> '' BEGIN WHILE @Pos > 0 BEGIN SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1))) IF @Token <> '' BEGIN INSERT INTO @ParsedList (Token) VALUES (@Token) --Use Appropriate conversion END SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos) SET @Pos = CHARINDEX(',', @TokenList, 1) END END RETURN END GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList] @TokenList varchar(max) AS BEGIN SET NOCOUNT ON; create table #Tokens (TokenID int default 0, Token varchar(50)) create clustered index Tind on #T (Token) DECLARE @NewTokens table ( TokenID int default 0, Token varchar(50) )
--Split ID's into a table INSERT INTO #Tokens(Token) SELECT Token FROM SplitTokenList(@TokenList) BEGIN TRY BEGIN TRANSACTION --get ID's for any existing tokens UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0) FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token) OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old SELECT TokenID, Token FROM #Tokens WHERE TokenID <> 0 UNION SELECT TokenID, Token FROM @Tokens COMMIT TRANSACTION END TRY BEGIN CATCH DECLARE @er nvarchar(max) SET @er = ERROR_MESSAGE(); RAISERROR(@er, 14,1); ROLLBACK TRAN END CATCH; END GO
Hi, I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task-> dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
Hi Guys, In Sql Server Management Studio, when I have run a query and I want to export to file, how do I include the headers (field Names) in the first row to be exported also.
I have a parent a package which contains a bunch of Execute Package tasks. The parent package sets a variable which contains the directory for writing logs to. Each child is configured to write logs to a text file, and uses a connection manager for doing so. The connection manager uses an expression for setting the connection string, and in this expression the log directory varaible is used (e.g. @[User::LogDir] + "\FileName.log").
Now the problem is this, when I run the ETL, I'm getting 2 set of log files for each package: one log file is created in C: and the other in the correct dirctory. Each log in C: just contains a single header row, and the corresponding log file in the logging dir contains the log data (including the header row). Even though the filename is specified in an expression, a value for the connection string appears in the properties for the connection manager ("Filename" which probably where the C: log files are coming from). I can't seem to remove this value, and I don't want to hard-code it to a fixed path. I've also set DelayValidation to True, with no luck. I feel I must be missing something obvious, any suggestions? Thanks!
I have a question,how to fix table header in reporting services? because my informations are alot and when i scroll on my report i lose the header and my user always wants to see table header
Hi, I need to create a report header that will only be shown on the first page. And I want to use the built in header system that is included with report. I can't create a custom header on the body part because I am using multiple columns for report rendering. Currently the header system either displays the header on all pages or it shows in all pages except the first or last page. Any help is greatly appreciated. Thanks.
Can any one tell me what to use to substitute Table in report Header?Or is there any other way?Because when i am using Textboxes align horizontally as replace to table,to align to my table in the body,when i exported it to excel,ive got problems in alignment in cell,Thanks
I have a report that the users reach from an url. In the url I have rc:parameters = false. That part works fine. But when I use rc:parameters = false, the property fixed header doesn't seem to work. If I run the report from the report server it works fine, but not from the url.
I have a table in a report which has the FixedHeader property set to true. What happens is that when I try to look for a text using the find option, the found text gets hidden under the header row, which then I have scroll back to see that. The user may think that the text was not found. Any solution to be able to bring the found item to somewhere the user can see?
Hi, I have another question (again), does it possible to prepare a header for all my report as a model, with specidif color for my table ang chart (as it is define in a css file). And after when I create a report I just told to put this model, and all I need was inserted... And more, if I do a change in my 'model' all the report which already import this 'model' have the modification... without opening each of them (and doing the modification it self)!
I hope my question is comprehensive...
I have a second question, how insert a header in a report via ReportBuilder ? It is look like it is impossible, but why ?
I need to add a group header to my report. What the heck am I doing wrong, when I add new row above/below my group it adds another group row. How do I make a header within a group?
How can I create a header that will only appear on the first page? The page header doesn't seem to have an expression area that would accomplish this and globals are not useable in table headers.
