Help--A Error About Memory!
Feb 15, 2006
I use linkedserver to get data from Oracle, but sometimes I get the error below:
Server: Msg 7399, Level 16, State 1, Procedure GetDataFromERP, Line 21
OLE DB provider 'OraOLEDB.Oracle' reported an error.
2006-02-09
[OLE/DB provider returned message: ]
[OLE/DB provider returned message: ROW-00001: Cannot allocate memory]
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' ICommandText::Execute returned 0x80004005: ].
I think maybe it is because the data is very large.
How do I solve this problem?
View 6 Replies
ADVERTISEMENT
Sep 14, 2007
Hi,
I am trying to execute a SSIS package from a client through BIDS, but when I start BIDS, I am getting the error -
SqlWb.exe : Application error - The instruction at "0X77D...." referenced memory at "0X00000002". The memory could bot be "read".
Click on OK to terminate the program.
Click on CANCEL to terminate the program.
Please help.
Other information:
I have tried running the package on the server and it executes properly. I really dont know why this is a problem with the SQL Server clients alone. I have also tried googling around and could not find any resolution. Can anyone point me to the right direction please!!!
Thanks in advance!!!
View 2 Replies
View Related
May 4, 2000
Folks,
I am getting error 8645 on a two processor 1GB RAM machine with SQL server 7.0 svcpack 1 on Windows NT svcpack 4. It has a 4GB db which is used by a VB. application running on another server. Initially I left the memory setting to dynamic, getting error 8645 when more users try to access the server. Upon lot of complains I changed the memory configuration and fixed it to 800MB, other application running on the server is Seagate backupexec but the problem exists even before this application. I stopped the service just to make sure if problem occurs because of backup software. Server is completely dedicated SQL server. Number of users are set to 400. I can see average 200 connections every day but active connections are almost 20. When error pops up in SQL agent display log, users complain about screen freezing up and cannot do anything. Machine of this size should be able to handle that many users without any glitch. Page file size is 1.5GB.
After careful examination I made following changes on SQL Server
1. Configured to use "Boost SQL Server priority on Windows NT"
2. Configured to use "Use NT fibers"
3. Dropped number of connections from 500 to 400.
4. Changed memory option back to dynamic allocation.
After these options changed there was no problem for couple of days and users were happy that not a single downtime occurs.
But this morning it started to acting up again, it does not show any error message in SQL server error log but in SQL agent error log.
My questions are:
What areas I need to look into to improve performance and to avoid these memory errors?
Why these messages appearing in SQL Agent error log?
Should I apply service pack 5 on NT and service pack 2 on SQL server?
Do I need to increase RAM.
I will really appreciate if you address this problem on priority.
Thanks in advance
Adnan
View 2 Replies
View Related
Nov 26, 2006
Hi All,
iam seeing some errors related to buffer latch for sometime now the error is something like below
"Waiting for type 0x4, current count 0xa, current owning EC 0x70EAC0C0.
WARNING: EC abc040c0, 7 waited 300 sec. on latch 70bee3c4, class MISC. Not a BUF latch"
is this something to worry and how to get rid of this?
any help wld be appricieated
its me monty
View 5 Replies
View Related
Mar 16, 2007
I'm trying to generate a very large report. My server's got 32 gigs of memory though, so memory shouldn't be an issue. However, when I try to generate my report, I get the following outofmemory error message in the error log on the server:
EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.3959, P3 45d6968e, P4 mscorlib, P5 2.0.0.0, P6 4333ab80, P7 116e, P8 29, P9 system.outofmemoryexception, P10 NIL.
The w3wp.exe process maxes out at ~1,250 MB. I imagine I just have to change a setting somewhere to allow this to grow beyond that, but I can't seem to find that setting. What do I have to do??
Thanks!
-Carl
View 4 Replies
View Related
Sep 24, 1998
Folks
I have gotten two 614 error messages over the past two weeks. I also have a known memory leak problem on my production server. After I have identified the data on the page, I have gone back to requery that page and have not had a problem. I am unable to run checkdb on the db, because it is to big, and I am 24x7. My question/assumption is, the data on this page gets loaded into cache, and because of the memory leaks I am getting glitches like this, has anybody out there, had this type of problem?
From BOL Error 614 is as follows:
Message Text
A row on page %Id was accessed that has an illegal length of %d in database `%.*s`.
Explanation
This error occurs when an attempt is made to access a row on a page and the actual length of the row is greater than expected. The error indicates that there is a structural problem on the database page accessed during a read or write operation, and it involves a specific row from that page.
This structural problem can occur as a result of the following:
·Hardware problem related to but not limited to the hard drive, controller, or the controller`s implementation of write caching
·A structural problem determined when loading a database dump; it may indicate a integrity problem with the database dump file
Thanks,
Doug Snyder
View 2 Replies
View Related
Oct 25, 2005
My company has a database that is throwing a weird error. We've tried reinstalling both the OS and the SQL instance, and the error still persists. We think this error might have to do with some .NET code we've written to run on the box, but I cannot find anything out on the internet about it. Here is the Enterprise Manager Error Log:
Insufficient memory available..
Error: 17803, Severity: 20, State: 4
Query Memory Manager: Grants=0 Waiting=0 Maximum=97638 Available=97638
Global Memory Objects: Resource=912 Locks=42
SQLCache=67 Replication=2
LockBytes=2 ServerGlobal=20
Xact=12
Dynamic Memory Manager: Stolen=2138 OS Reserved=1048
OS Committed=1026
OS In Use=1022
Query Plan=1777 Optimizer=0
General=1066
Utilities=12 Connection=262
Procedure Cache: TotalProcs=488 TotalPages=1787 InUsePages=542
Buffer Counts: Commited=5168 Target=131072 Hashed=1917
InternalReservation=191 ExternalReservation=0 Min Free=128 Visible= 131072
Buffer Distribution: Stolen=351 Free=1113 Procedures=1787
Inram=0 Dirty=599 Kept=0
I/O=0, Latched=23, Other=1295
WARNING: Failed to reserve contiguous memory of Size= 65536.
I can find information if I do a Google search on "Error: 17803, Severity: 20" But as soon as I add "State: 4" to the query I get no results. Also, the articles that I have seen that give the same error messages (but different states) tend to deal with servers that have more than 4GB of memory. This server has ONLY 4GB of memory and in order to try and resolve this issue, we have limited the server to 1GB of physical memory to no avail.
Any help would be appreciated. Thanks!
View 3 Replies
View Related
Feb 20, 2004
When I execute the very long query(in the attached), I got an insufficient memory error, Please help me check. Thanks in advance.
View 1 Replies
View Related
May 21, 2007
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83768
Lance Harra
View 2 Replies
View Related
Jan 18, 2008
We have an application running on a SQL cluster (Win 2003) and SQL 2005 SP2 within it's own instance - 12 total databases and about 100G of data total. The node this instance is on has 64G of RAM with 16 allocated to this instance (only 8G allocated to other instances currently).
Now to the problem there is one process that when running we get the error below and we cannot figure how to correct this - the process runs 8 times a day and has been running great and then all of a sudden stopped running with the memory error. I am in search of any tips to diagnose or correct this issue
[298] SQLServer Error: 701, There is insufficient system memory to run this query. [SQLSTATE 42000]
Thanks in Advance
View 2 Replies
View Related
Jun 27, 2007
Hi!
I am currently encountering an error of testing an SSIS package in the server.
The package runs fine on my laptop, but not in the server.
I appreciate it for any of your input, comments, and suggestions.
The package is to populate records (150k rows) from a DB2 table and insert them into
another DB2 table (12,754,715 rows).
The server,
Windows Server 2003 Enterprise
SQL server 2005 sp1
8 CPUs
6 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
My laptop,
Windows 2000 Professional
SQL server 2005 sp1
2 CPUs
2 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
It fails on the insertion part (see the error message at the bottom). I have been playing with "DefaultBufferMaxRows" and "DefaultBufferSize" properties, but still no luck so far.
For the testing purpose, I even only select 2 rows from the source table, but it still fails with the same error message. And strangely, it still takes a very long time to process (for just two rows). In my laptop, it only takes few second to finish.
I have been really pulling my head to try to figure it out. Any of your help/input is highly appreciated! Thanks!
======================
Error Message
[POLICY [1683]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E. An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
View 2 Replies
View Related
Oct 4, 2007
Hello.
I'm working with SQL Server 2005 Standard edition.
I have a Java program that loads PDF files into the database. I have a table called T08_entity which, among others, has two IMAGE columns. The first Image column is for the original PDF file. The second one is for the PDF file with modified permissions (printing, saving, etc). This is made using the i-text library.
The programs looks for the content of a disk folder, reads the contents of the folder, and inserts, one by one, the pdf files (besides other fields, like the name of the file, and ID, etc... but these are varchar or int fields. No problem with these.
When the folder has only small files (smaller that 7-8 mb), it loads them without any problem into the database. But when the folder has bigger files (>10mb, more or less...) I get an OUT OF MEMORY error.
I'm using the latest sqljdbc.jar driver (v1.2.2727). My server computer has only 1GB of RAM... but I've read that this latest driver can load big amounts of binary data using the connection property "responseBuffering=adaptive".
Here is a sample of my code (at least the most relevant lines):
This is my connection code:
public String getConnectionUrl(){
return "jdbc:sqlserver://"+serverName+":"+portNumber+";databaseName="
+databaseName+";responseBuffering=adaptive;selectMethod=cursor";
}
public java.sql.Connection getConnection(){
try{
...
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
con = java.sql.DriverManager.getConnection(getConnectionUrl(),userName,password); if (con.getAutoCommit())
{
con.setAutoCommit(false);
}
...
}
catch(Exception e){
System.out.println("etc, etc...");
}
return con;
}
The following is a loop where each loop represents a file in the folder:
File[] contenido = archivo.listFiles();
for(int i=0;i<contenido.length;i++)
{
if (contenido[i].isDirectory())
{
procesarDirectory(contenido[i]);
}else
{
insertDirectory(contenido[i]);
}
}
...And this is the insertDirectory procedure which inserts every file: the pdffile and pdffilenoperm are the IMAGE columns. The rest are varchar or int columns:
public void insertDirectorio(File archivo) {...if (archivo.isFile()){ pstmt =con.prepareStatement("INSERT INTO temp_carga "+ "(directory, name, dir_sup, filetype, pfilesize,pdffile,pdffilenoperm)"+ " values (?,?,?,?,?,?,?)"); }...
long tamano = archivo.length();
pstmt.setString(1,pdffile.getPath());
pstmt.setString(2,pdffile.getName());
pstmt.setString(3,pdffile.getParent());
pstmt.setString(4,filetype);
if (pfilesize != 0) {
pstmt.setLong(5,pfilesize);
}
else
{
pstmt.setString(5,null);
}
if (pdffile.isFile()) {
try{
//INSERTS ORIGINAL FILE................
int fileLength = Integer.MIN_VALUE;
is = new FileInputStream(pdffile);
fileLength= (int) pdffile.length();
pstmt.setBinaryStream(6, is, fileLength);
//INSERTS FILE WITHOUT PERMISSIONS
(THIS PART OF THE CODE IS LONG AND IRRELEVANT, IT JUST USES THE ITEXT LIBRARY TO MODIFY THE PDF FILE. AT THE END, I HAVE THE FILE IN AN OUTPUT STREAM, AS SHOWN HERE:)
ByteArrayInputStream inputnoimp = new ByteArrayInputStream(outnoimp.toByteArray());
pstmt.setBinaryStream(7,inputnoimp,(int)outnoimp.size());
} catch(Exception e) {
err = e.toString();
}
}
pstmt.executeUpdate();
con.commit();
pstmt.close();
this.closeConnection();
}catch(java.sql.SQLException e) {
err = e.toString();
}
}
Well, as I said, when I run the program, when it reads smaller files, there's no problem. But when it gets a big file, I get the OUT OF MEMORY error. I have another application that reads pdf files ONE AT A TIME, using a code very much like this one, and it reads big files (>30mb) with no problems. The problems is with this one.
Any help will be appreciated. If you have any question to clarify the problem, just tell me.
Thanks in advance.
Eric.
View 7 Replies
View Related
Oct 26, 2007
Hi,
Is there any setting in IS that I should have adjusted in order to avoid this message?
Information: 0x4004800C at EXTRACT from MSCRM and AX (From Source to Working Tables for Dimension), DTS.Pipeline: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 124 buffers were considered and 124 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked
cherriesh
View 1 Replies
View Related
Apr 11, 2008
I have a report with a matrix object within which I can "drill-down" through several row and column groups. The report runs, and I can successfully "drill-down" within the matrix object.
However, when I create a drill-through action that executes another report when users click on the summed number of the matrix object, the main report fails with an out of memory error. When I remove the drill-through action, the report runs successfully again. This report is important because the users need to use it to get the detailed records from the main report.
Why is this happening? Does adding the drill-through links really use up that much memory?
Is there anything I can do to correct this problem, besides play with server memory settings and/or upgrade to 64 bit? I have already passed as much of the aggregation as I can to the database; in fact, the query for the main report only pulls 1000 records!
I refuse to create an intermediary drill-through report, since the whole reason I created the first drill-through report was because the main report can't handle the detail in the first place.
Thanks.
View 4 Replies
View Related
Jun 13, 2001
When I try open a table in Enterprise Manager, I am getting the following error:
The instruction at "0x418561c4" referenced memory at "0x00000034". The memory could not be "read".
Any ideas what this is?
Paul
View 1 Replies
View Related
Jan 13, 2004
We're experiencing the following problem on our servers:
Server: Msg 701, Level 17, State 1, Line 3
There is insufficient system memory to run this query.
I've been able to fix the problem by a)Lowering the Max Server Memory and b)Minimum Query Memory.
However, Microsoft state there is a hot fix available for this issue at in KB Article 817262 (
http://support.microsoft.com/default.aspx?scid=kb;en-us;817262&Product=sql2k).
Any idea how one is supposed to contact Microsoft to get this fix without paying?
Thanks,
Nick
View 3 Replies
View Related
Oct 4, 2004
I am trying to use a DTS package to get data from db2 in a s390 environment. I am able to use the Import task and then run a query on db2, save the package and execute the package.But when i try edit the transform task i get a mmc.ese application error...it says that the instruction at addres "" tries referencing memory at address "". The memory could not be read...
I installed a ibm odbc driver on my client...obviously the connection seem to work since the package executes...But then the edit issue...
If any one faced this problem or know what i am doing wrong....appreciate ur time and effort...
Thanks
View 1 Replies
View Related
Jan 31, 2006
Hello,
We receive this error after running a complex query. Could someone please shed some light on what this means exactly?
One of our developer said we needed to purchase a server with more memory, but would SQL Server not simply just run slower by using virtual memory instead of physical RAM?
I know there is a limit and servers must be upgraded as the processing requirements increase, due to data set size increases for example, but we have just been told to "purchase more power because after a while as you process more rows, SQL Server will require more resources"
Any comments on this would be really appreciated.
View 6 Replies
View Related
Oct 29, 2005
Hi,I've got this dts package in sql server 2000 sp4 that has severaltransformation tasks with an oracle database (10g) as the destination.The package executes successfully when run through the dts designer butwhen run using dtsrun, I get the following error at the completion ofall tasks in the dts package. The data inserts into the oracle databasebut i always get this Application errorThe Instruction at "0x7c8327f9" referenced memory at "Oxffffffff". Thememory could not be "read"Does anyone know how I can fix this?ThanksLyn
View 2 Replies
View Related
Apr 15, 2008
Hi,
Running visual studio 2005 on win XP with 2GB ram.
Reporting server Windows 2003, SQL 2005 Enterprise
I have a SSRS 2005 report that runs just fine when all fields are expanded. All the groups are there, and all is right with the world.
I now right click the detail line, edit group, choose visibility, select "visibility can be toggled by another report item", leaving "initial visibility" as "Visible" and again, the report runs in about 10 seconds and works fine.
I go back into the report and choose visibility and set the initial visibility to "hidden" and the report runs for a little longer (not much) but fails with a "system.outofmemoryexception" error. this happens when the "devenv.exe" process hits about 840MB.
Has anyone found a work around to this issue? The report is returning about 28,000 records of about 23 fields, so it isn't as if it is a massive data set that it is working with.
There are a lot of small groups, but even if I turn off the togge option, with the group having an initial visibility of hidden, the memory usage goes through the roof until the PC runs out of memory.
Curiously, when I publish the report to the same PC and run it in IE, it runs with no problems (albeit take a long time to retunr rows - even though the query runs in under a second).
It appears to be the rendering that is causing the memory balloon. Is there any way to reduce the memory usage of the rendering engine?
Any ideas would be appreciated
View 1 Replies
View Related
Feb 27, 2007
HI ,
Need some quick fix Help
I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )
The files, I€™m trying to load, have
number of rows more then 15 million.
On execution of the package I get
Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4
CPU Box.
There seems to be some Buffer and
Swapping related issue which I€™m not able to figure out. It says that System is
unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE
1.dtsx" starting.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.
An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".
Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.
Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.
Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.
Task failed: ABCDE 2003 to
2004
Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.
Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.
Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.
Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to
2005_11
Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
€¦€¦.
€¦€¦€¦€¦
View 11 Replies
View Related
Jun 22, 2007
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
View 5 Replies
View Related
Feb 20, 2007
Hi,
when i am trying to execute package in ssis then given below errors comes many times.how to fix it.any body can ......
in ssis default buffer size 10 mb.
soure is iseries-db2 on as400 in production server ,
and destination is db2 udb on windows in dev server.
usersapce page size in db2 is 16-32k
4 gb ram support in server with 2003 server standard edition.
errors are---
Information: 0x4004800D at CHDRPF 312-315, DTS.Pipeline: The buffer manager failed a memory allocation call for 15728400 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CHDRPF 312-315, DTS.Pipeline: A buffer failed while allocating 15728400 bytes.
Error: 0xC0047011 at CHDRPF 312-315, DTS.Pipeline: The system reports 83 percent memory load. There are 3488509952 bytes of physical memory with 558743552 bytes free. There are 2147352576 bytes of virtual memory with 222920704 bytes free. The paging file has 7416537088 bytes with 3703283712 bytes free.
Error: 0xC0047056 at CHDRPF 312-315, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "DataReader Source" (15437) on component "DataReader Output" (15442). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0x8007000E.
Error: 0xC0047039 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
so what need to do for fix that problem ......
View 10 Replies
View Related
Feb 20, 2007
A transport-level error has occurred when receiving results from the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.).Net SqlClient Data Provider at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByteArray(Byte[] buff, Int32 offset, Int32 len)
at System.Data.SqlClient.TdsParserStateObject.ReadUInt32()
at System.Data.SqlClient.TdsParser.ReadSqlValueInternal(SqlBuffer value, Byte tdsType, Int32 typeId, Int32 length, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.ReadSqlValue(SqlBuffer value, SqlMetaDataPriv md, Int32 length, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ReadColumnData()
at System.Data.SqlClient.SqlDataReader.ReadColumnHeader(Int32 i)
at System.Data.SqlClient.SqlDataReader.ReadColumn(Int32 i, Boolean setTimeout)
at System.Data.SqlClient.SqlDataReader.GetInt32(Int32 i)
Ive just started getting this on a stable application thats used a datareader on millions of records.
Not sure where to got from here and I can't find anyone else whos getting the failure during the processing.
I could disable shared memory protocol but that seems extreme. I'm on Sql Enterprise 9.00.2047. Maybe the process is hammering the server very hard? Personally I've rarely ever seen SQL be the cause of an error, only user config, bad disks or power issues.
I'm running the app again with SQL Profiler capturing "standard" events.
Just need it to blow up again.
I can run the app on another machine of course and I wouldn't get Shared Memory Provider being used. Maybe I ought to do that as well. At least if the error is not really in the Shared Memory I'd have another avenue to explore.
Anthony
View 5 Replies
View Related
Mar 5, 2007
have done several SQL_CLR stored procs.
on one of them, get an intermittent error
Msg 6532, Level 16, State 49, Procedure clrsp_RetailPriceOnDate, Line 0
.NET Framework execution was aborted by escalation policy because of out of memory.
System.Threading.ThreadAbortException: Thread was being aborted.
System.Threading.ThreadAbortException:
at Data_SQLCLR.StoredProcedures.clrsp_RetailPriceOnDate(SqlInt32 iSQLsysid_Individual, SqlInt32 iSQLStore, SqlInt32 iSQLGroup, DateTime dtPriceDate, SqlInt32 iSQLInclude)
Msg 6532, Level 16, State 49, Procedure clrsp_RetailPriceOnDate, Line 0
.NET Framework execution was aborted by escalation policy because of out of memory.
Problem is that it is intermittent - runs fine several times(takes c 30 secs to run, returns 15k records), then fails, then runs ok, fails/runs/runs/fails etc... etc...
any ideas on how to track / catch this one
thx
View 3 Replies
View Related
Oct 3, 2000
Hi all,
I am running Sql 7.0 with sp2. I have a memory 4GB. When i am running some batch jobs and replications i am getting following error number:
ERROR NUMBER : 8645
A time out occurred while waiting for memory resources to execute the query. Rerun the query.
Can anyone suggest me how i have to resolve the above error, because i was facing this error very often. Pls suggest me a permanent solution.
Thanks!
--Kavira
View 1 Replies
View Related
Aug 22, 2007
Hi,
I am back with one more problem..
I have created few reports using SSRS 2005. I am using Oracle database in Data Source to fetch my data. It is working fine and showing me report correctly. But after running the report 8 to 10 times, it starts giving me Memory error. To get rid of that, I need to recycle (stop-start) ReportingService from IIS.
I am exactly getting following error...
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
I am not getting the actual problem, why is it giving memory error only after running few times? Please let me know if anyone facing same problem or knowing the solution for the problem.
Thanks,
HMaheta
View 3 Replies
View Related
Feb 8, 2007
I'm getting this error on one of the test pc's when doing a adapter.fill for a datatable.
Any ideas on how to debug this?
Thanks,
Bernie
View 4 Replies
View Related
Jul 13, 2015
I am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.Â
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
View 4 Replies
View Related
Sep 28, 2007
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
View 4 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Oct 11, 2007
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
View 3 Replies
View Related
