Hi
I am using a foreach loop container and Data flow task dropped on it.
According to the logic the dataflow task should be executed twice and for eacl loop fetches 2 records in the variable used in the sql in Data flow task. It works fine except that it does not iterate twice.It simply executes once.
Please help
Has anyone ever seen this issue?
If i place a loop container inside a sequence container the connectors within the loop container disappear.... is this a bug - will the loop tasks still run in the correct order?? or will they fire off willy nilly??
Hello Experts,
Sorry that I open a new thread again but I didn€™t found any good tutorials about foreach loop container. I would like to read every row from one table and do something.
I red something about sql task€¦ Can someone give a little instruction, please?
Kind regards,
Alex
Hi
I using data flow task to import from flat file to database but i need to use Foreach Loop Container to import multiple files in specific folder and all will be insert in the same table
tahnks & Regards
What I'm trying to do is take multiple "snapshots" of a membership for many months. I was trying to do this in a For Loop Container in which I added one to the month variable and subtracted one from an iteration variable each loop, unless the month variable = 13...then I would add one to the year variable, set the month variable to 1 and subtract one from the iteration variable. This, I was hoping, would allow me to initialize 24 to the iteration variable, 1 to the month variable and 2004 to the year variable, kick off the package, and get 2 years worth of "snapshots" in seperate files (one for each month). Here is the AssignExpression I thought would work:
@Member_Month == 13 ? @Member_Month = 1 && @Member_Year= @Member_Year + 1 && @Member_Iteration = @Member_Iteration - 1 : @Member_Month = @Member_Month + 1 && @Member_Iteration = @Member_Iteration - 1
The package states that the single "=" should be double, but I don't think that that is what I want to do (I tried doing this just to check, and it didn't like this either). I think that it is having problems with doing multiple things on both sides of the ":". What am I doing wrong?
Thanks,
Brian Layden
We have a config table which has columns like pollingfolder, cop to folder etc.
Data looks like this
Config id polling folder
1 d:dataloadacn
2 d:dataloadship
under ACN and Ship folders we can have more than 1 source files which had to be loaded into target
the load process has to be repeated for each file in all the folders like ACN and ship
I have used for each loop container to poll the folder.
Can we set the directory to be polled at runtime taking from config table.
For doing this I have used the property Directory in expression editor of for each loop. But it is not working.
If I hard code the variable value in variables section , then its working.
How to change the directory to be polled value at runtime?
I'm trying to set up a For Loop Container that steps through the loop based on date logic.
Here's an example of what I'd like to do:
InitExpression | @SomeDate = 1/1/2007
EvalExpression | @SomeDate < GETDATE()
AssignExpression | @SomeDate = DATEADD(DAY, 1, @SomeDate)
The above syntax does not work, and I can't find an example that uses date logic with the For Loop Container.
Can anyone help me with this, or point me to an example that uses the For Loop Container with dats?
Thanks in advance for the help!
Hi,
I am using For each loop container in my SSIS package which will loop through more than one input file in the input folder.
All the input files in the input folder are picked by one by one. All the input files in the input folder are executed with the same ExecutionInstanceGUID.
Now, my requirement is to get a new ExecutionInstanceGUID during the execution of each input file in the For each loop container. My package only contains the For each loop container with some logic inside that.
Please let me know if any one can help me for the same.
Regards,
Sriram.
Hi,
A very strange thing happened to me. I have a package that includes two For each loop containers. Each container has script tasks, sequence containers, etc. Both are Foreach ADO Enumerator basis. It works without any problems until I changed the position of one of them in the Control flow and added some code in the script task. After these changes I executed the package and both of For each loop containers did not execute the tasks inside of them, any task. However the execution color on the containers was green (success). How can it be?
Your help is much welcome. Thanks in Advance.
JoĂŁo Cruz
Hi
Can anyone point me to an example of using a ForEach Loop Container to step through the rows in a recordset. I cannot seem to see how this is done from the help files.
Thanks
WHAT IS THE USE OF THE FOR LOOP CONTINER
PLEASE GIVE ME THE EXAMPLE
REGARDS
KOTI
Hi,
I am having problem when setting for-each container's EvalExpression as a variable comparison.
I have set this in expression editor
@[User::Syn] == 1
Editor says that it couldnt convert from System.Bool to System.String.
If I put it in quote, then for-each container says that it needs Bool, not String.
Please help me with this,
Thanks
Hi
Currently the ForEach Loop container is set to loop over the entire collection of records in my table, but I only need to loop thru the records where the status = x. How is that possible? Can I use expressions to set the enumerator to do something like this. Basiclly the collection values are used for further processing, and I would like to avoid looping thru records which have been processed already, which means they already have a status set to y. Please let me know. Thanks.
MA
I am trying to move files from one directory to anonther using the For Each Loop Container and a File System Task. However, on the FIRST iteration of the ForEach Loop the variable that I am setting to the 0 index of the For Each Loop is returning me a valid directory with no file ( path only ) from who knows where ????
On the second iteration of the For Each Loop everything works as expected and I get the full path and file name and it iterates through all the files in the directory o.k.
So I have had to put a Hack to skip the fist iteration of the loop and then execute the File Task on the second iteration but I dont see anyone else doing this.
Where in the heck is it getting this odd directory from on the fist iteration ( its not my User varible because I am initializing it to \nowhereofile ). What am I doing wrong?
hi everyone,
I've created a Send Mail task which works properly and now I'd like to send that email n times.
How do I such thing. I moved that task inside Foreach loop container and then I choosen "Foreach From Variable Enumerator" and then I've created a Int32 variable.
And now, I don't know how to tell that increments that variable
TIA,
Hi. I am running a package using 'execute package' inside a for each loop file iteration. I have to iterate through some 10,000s of files to ETL source data, a resonably complex package. I want to set going and get some sleep but every 200 files or so I get a memory exhausted error and the task fails. Is there a short easy fix to refresh memory each iteration. If so please let me know. Just ignoring the failure at task level won't refresh the memory, will it?
Thanks for the help.
Could someone send me any links or information on how to loop through an ADO.NET dataset in SSIS? I need step by step information please.
Thank you,
Shiva
Hi,
My Foreach Loop container has 10 different task inside. I want to execute the first task only one time. I have a variable with increases for each repition. How can I put precedence contstraint on the first task so that it should execute only first time and other task has to execute all the time.
Thanks
Hi All,
Seems like a simple task, but been a struggle.
Simply trying to move a group of files from one folder to another folder and renaming the files with the monthyear in the middle of the filename..
I'm using a FOR Loop container and works find. The added complexity is I'm trying to rename the files the same tine and putting the Month Year into the file name.
I guess the struggle is how to get the file name out so I can manipulate it.
I tried creating variable(V_SOURCE) which stores the file path and create another variable(V_FILENAME) to hold the filename. I believe on the expression page of the FOR LOOP editor if I select the the file name and extension radio button, it should put the file name in the V_FILENAME variable.
In my file task trying to join the two variables together in another variable, keep saying my path is wrong with the file task kicks off.
here's the syntaxt
@[User::V_SourcePath] + @[User::V_FILE_NAME]
With a ForEach container, configured to loop through files in a
directory, if I have a problem with a file.. can I direct the loop to
skip on to the next file?
I'm processing structured files, first record of each is some
header info, body records are in the middle, and then the last record
is a trailer containg a checksum
So, for each file in the directory, I split the records into three raw
files, one for header rec(s) , one for body recs and one for trailer
recs. (based on line numbers and using a conditional split to direct
the records)
Then I start by processing the header recs in a dataflow.. if all goes
well there I move on to the next dataflow to process the body recs from
the DataRecs raw file.. etc...
I would like to do some validation at each processing step.. if a
header rec fails validation say... then I'd like to just stop
processing that file and move onto the next file...
Now, I don't see my validation throwing an exception... so its more
that I'd decide (maybe using an Audit ) that the header doesn't pass
validation.. then I'd like to put a record in an error table (with info
about filename, source etc, not just content of the current data row)
But not sure what approach to take on this...
If there is an appropriate section in BOL please point me at it...
Thanks
PJ
Hi,
I have a "Data Flow Task" inside" For Each container". Data flow task is processing file and updating the DB.
If one of the file is correpted i want to move to error folder and continue with the next file. i have given red arrow to a script Task which move the file to error folder. but its not continuing with next file. how can Ido that?
Any help
Hi everyone,
I am having hard time with foreach loop container. The for each loop container in my package goes over all the rows in a ADO enumerator recordset variable and shows row values one by one in message box. The problem is that it just keeps printing the first row infinitely. Could anyone tell me what could be wrong?
Thanks in Advance,
Hi,
I am using a For Loop container with a script inside it in My SSIS package. Inside the script I am type casting one of the object variables in a class object of XMLReader Type. I am using CType Function for it. The For Loop is resulting in a memory leak and the references are not getting deleted even if they go out of scope.
Does anyone have faced similar issue?
Please guide.
Thanks.
Dear All!
I have a "Foreach Loop Container" to search files in a folder. And I only want to search .txt and .txt.gz file. I set property "FileSpec" as "*.txt,*.txt.gz" but my container dont run. Can you help me?
Thanks
Hello,
I want to set up a Foreach loop container to loop through several flat files. I have a connection manager set up for individual flat files. The metadata for the files is all the same. They are fixed width files, and contain sixty five columns.
I didn't see a place in the container properties to configure the metadata of the files. How can a Foreach Loop Container 'know' the metadata of the flat files that I want to loop through?
Thank you for your help!
cdun2
Hi,
Another classic example of something silly I must be doing
I have a "Foreach Loop Container" which uses a "Foreach ADO Enumerator".
The object source is a recordset variable.
Inside the "Foreach Loop Container", a lot of things are happening - some Execute SQL Tasks, Send Mail Tasks, Script Tasks and also a couple of Sequence Containers.
Now, I am getting 2 records in the recordset, but, the "Foreach Loop Container" executes just once.
Any Ideas?
Thanks in advance.
Regards,
B@ns
Hi Everyone:
I have a quick but imp SSIS question. I have a For Each Loop Container, and inside that I wish to add a Execute SQL Task item, so I can call a sp to do some inserts/updates. The ForEachLoop container is looping thru a ADO Object source variable(which is the user variable defined by me, as a FullResultSet). In my Execute SQL Task, I would like to utilize one of the columns from the result set as an input parameter to my Stored procedure. Can someone please advise on how to do this? Please let me know if you have any more questions. I am waiting for a response... Thanks in advance.
MA
Hi,
Is it possible to use multiple masks in a For Each File Loop container?
I need to process "*.txt" and "*.csv" and tried to separate them with all the usual characters("," ";" etc.) but it does not seem to work. I don't want to create 2 or more containers for each mask.
Thanks
Hello
I would like to loop through a folder and then log the folder's content, as in the names of the files, into a database like all the events get logged. Here is what i have done. I put some files into the folder c: emp made a loop through it, set up a variable 'temp' scope is the foreach loop, set the variable raisechangedevent to true. I have also confgigured the loop to put the result of the looping, in the temp variable in the variable mappings tab.
Strangely nothing is recorded into the "execution results" when i test run the package ? Do i need to make a event handler for the onvariablevaluechanged event for the foreach loop container to be able to get the value of the variable logged or is there something other that i'm missing ?
I'm having a problem getting the for loop container to process all excel files in a folder. I set the collection folder to where my .xls files are, and i set a variable in the for loop container to the FileName. I then changed my source connection and added expressions for
View 12 Replies View RelatedHi,
It seems like For Loop Container works like do-while loop in C++. I have set its EvalExpresstion to @[User::SyncStats]==0 , I have an Execute SQL Task before this container that sets the variable to 1 but Container still executes atleast one time.
Anybody else been through this ?
Dear all,
I have a problem using SSIS since I was a beginner, the problem is I have to do some data transform from flat files into database. These flat files come from many branches of my office with the file structure like this D:SSISranch_nmfile_nm.txt, in folder SSIS there are many branch_nm folder and each branch_nm folder contains many flat files.
My idea was grab the branch_nm folder into array variable using Script Task and then loop this array variable using ForEach Loop Container to get the file and using it for Flat File connection, but I don't know the way to do it.
May this idea work out for sure ?? How to use array variable, that we previously defined inside Script Task, in ForEach Loop Container ?
Thanks in advance
Hi everyone,
I've got a Foreach loop container which uses a Foreach ADO Enumerator and works fine.
But problem comes when I launch inside the general loop another Sql Task (select) which sometimes has rows and sometimes hasn't. When it have rows everything is fine the workflow follows fine but when it has not.
I obtain this error (obvioulsy)
[Execute SQL Task] Error: An error occurred while assigning a value to variable "GZon": "Single Row result set is specified, but no rows were returned.".
How to deal with that?
Thanks indeed