Time out occurred while waiting for buffer latch type 2,bp 0x18b7d40, page 1:11558916), stat 0xb, object ID 9:1842105603:2, EC 0x5862D9C8 : 0, waittime 300. Not continuing to wait.
What does this mean any reason and fix for it..?
Thanks
I am getting below error while executing any SQL query on database server.
Time-out occurred while waiting for buffer latch type 2 for page (20:17937), database ID 13.
There is currently some space issue on the server, so by any chance this space issue is causing this error?
I have been looking at Books Online and I'm trying to figure out how I can resolve this error.
MSG 845, Level 17, State 1
Time out occured while waiting for buffer latch type 2 for page.....
Thanks..
Does anybody know what might cause the following message to show up inthe SQL Server Error Log?:Time out occurred while waiting for buffer latch type 2, bp0x12260f80, page (5:77914), stat 0x40d, object ID 7:421576540:0,waittime 500. Continuing to wait.I've read several articles about what to do about this situation onSQL Server 2000, but I'm running SQL Server 7.0. Specifically, I'mrunning version 7.00.842. Is there a way to resolve this problemwithout upgrading to some flavor of SQL Server 2000?
View 2 Replies View RelatedHi Guys,
One of your SQLSERVER 7, Server throws the below error message into the log file. It won't go away until the server get rebooted. When this error start showing up.. customers have hard time connecting to the Server, eventually we have to reboot the server.
Time out occurred while waiting for buffer latch type 1, bp 0x18b9200, page (1:50859), stat 0xb, object ID 17:1954106002:1, waittime 500. Continuing to wait.
Any help is greatly appericated.
thanks
During a bulk insert I am receiving this error message in the sql log. It appears to have caused the server to reboot the other night..
I am running SQL 2000 8.00.760 (Service Pack 3)
2004-04-07 12:57:52.82 spid8 WARNING: EC 259683c0, 0 waited 32100 sec. on latch 807133b0. Not a BUF latch.
2004-04-07 12:57:52.82 spid8 Waiting for type 0x4, current count 0xa, current owning EC 0x70899570.
Any ideas???
Thanks
Scott
Ben writes "Dbcc checkdb showed a database to have consistency errors, however running repair_allow_data_loss resulted in the following error
Server: Msg 8966, Level 16, State 1, Line 2
Could not read and latch page (1:1370) with latch type SH. sysindexes failed.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Please could you tell me how to fix it, and how it occurred in the first place?
Thanks"
I've looked at the other threads on this topic, and don't see an answer to the following question:
Why should an error destination time out waiting for error rows?
I'm using SQL Server Destinations both for my staging tables and for my "Error Staging" tables. Yet it seems that these are timing out if the package runs a long time without any error rows. This leads to two questiosn:
Why should an error destination time out waiting for error rows?
I can solve this by setting the timeouts to some very large number. But, is there a better way to do this?
Right now, if the package takes five minutes, I need to set the timeouts to longer than five minutes. That does not sound like a good idea.
I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"
View 3 Replies View RelatedWe have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".
View 2 Replies View RelatedHi
I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.
There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".
SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).
I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.
Does any one have any idea what happened?
TIA . . . Ed
Good day everyone,
I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it?
Here's the warning:
"A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned."
Thanks,
Langston
Hi All,
This might be a bit of a question like "how long is a peice of string" however here goes.....
What is considered to be a high average latch time?
We have a SQL2000 machine which has:
700-900 ms average latch time
100% Buffer Cache Hit Ratio
No memory pages / second
Very low (almost always below 5%) cpu usage
Next to no disk transfers / sec
0 average lock time
I am surprised that the latch time is so high. Any ideas, whether I should be looking at something in particular?
Cheers in advance.
Troy
I setup a SQL Agent to send me an email when the Average Latch Wait Time is greater than 300ms. Now I receive an email every 15 seconds stating that the current ALWT is 3916ms. That value never changes with the emails. However, the perfmon shows nothing at all (shows zero).
I also have a Buffer cache hit ratio of 2848.00.
These numbers are when there is NOBODY on the DB at all It is just sitting there. When I reboot the server, as soon as SQL starts it starts to send the emails again.
Server: Intel Xeon Quad Core 2.66
RAM: 4GB (with /3GB in the boot.ini)
RAID 1: OS
RAID 1: Data (DB and logs)
CPU Utilization: 0-1%
RAM Utilization: 527MB
OS: Server 2003 R2 With SP2
SQL: 2005 Standard with SP2
How can I determine if the ALWT is really 3916?
I executed 'Select * from sysprocesses where SPID>50 and waittime>0'
Which showed;
BROKER_RECEIVE_WAITFOR
waittime=110640ms
waittype=0x0075
status=suspended
program_name=DatabaseMail90 - Id<3780>
Any assistance is greatly appreciated.
Thank You
Magnum
Hi,
we''re currently performing a dry run of migrating some large (100GB+) SQL Server 2000 databases from a SQL 2000 cluster onto a new 2005 mirrorred database pair. The new configuration has completely separate database servers and a new dedicated SAN.
Upon restoring our largest database we are seeing the following errors recorded in the log after setting up mirroring and then trying to run DBCC CHECKDB:
"Unable to read and latch page (1:1323852) with latch type SH. 21(The device is not ready.) failed."
We are currently investigating the SAN hardware logs to determine if this might be a physical issue as it would seem to indicate, however has anyone any experience of this or insight into what may cause this error?
Thanks in advance!
Hi!
Is it possible to generate a script, that extracts every bit of data it can, from tables which suffers from latch errors;
DBCC CHECKDB ->
Msg 7985, Level 16, State 2, Line 1
System table pre-checks: Object ID 4. Could not read and latch page (1:403) with latch type SH. Check statement terminated due to unrepairable error.
So bad news on that one. There are no backup available that I know off, so all bets are off on that part of the recovery process.
The "good news" part of the problem, is that it is possible to extract some data out of the table, before SQL server 2005 returns the error. So what I want to do, is get every bit out I can, doing it somehow automatically, so I don't have to run bcp on 180 tables :).
Presumeably, this is quite possible, but how?
NB. If I do a complete basic SELECT * FROM tbl1, it returns data, then errors out, but what about the data after the last row SELECT returns? Is it possible, that there might be data in the table that are recoverable after the 'broken row(s)'?
The scenario is as follows: I have a source with many rows. Each row has a column called max_qty_value. I need to perform a calculation using another column called qty. This calculation is something similar to dividing qty/(ceiling) max_qty_value. Once I have that number I need to write an additional duplicate row for each value from the prior calculation performed. For example, 15/4 = 4. I need to write 4 rows to the same target table as in line information for a purchase order.
The multicast transform appears to only support fixed and/or predetermined outputs. How do I design this logic in SSIS to write out dynamic number of rows to a target table.
Any ideas would be greatly appreciated.
thanks
John
Server Error in '/' Application.
Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.]
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +1188873
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +413
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
DataCaoZuo.Manage_ResultTB_Caozuo(String comstr) +145
Cls_UserManage.GetAllUserList() +18
Index.Page_Load(Object sender, EventArgs e) +83
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +34
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Ok bear with me here :). I have a server that is getting about 1000000 hits per day with about 10,000 unique vistors. For the past 2 months I have been revamping my code trying to deal with the increase in traffic. I have 2 boxes, one for the website, and one for the SQL. They are connected through a secure backlink so that I dont have to worry about encrypting the data. So the problem started when I updated the MDAC components a few weeks ago. I started getting these freaking timeout errors, they are up to about 1000 errors per hour. I have been monitoring the connection pooling using the system monitor for about a week and have noticed that I am not maxing out the pooling but I am still dropping connections. I went into the web.config and turned my max connections to 1000. Unfortunately this didn't even put a dent in the problem. It doesn't matter if I have 12 or 212 open connections it still drops them. I am at my wits end with trying to debug this problem. I am wondering if anyone else has had similiar problems recently. Also on a side note I have checked all my connections to make sure that I am closing them. Not only do I close my datareaders but I also set them to nothing. In addition to closing and reseting my datareaders I am also disposing and reseting my connection objects as well as closing them. Any help would be greatly appreciated.
Thanks,
Daniel Christoffersen
Hey,
From time to time i get this error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding." so I tried to change the connection string by adding thie following "Connect Timeout=200; pooling='true'; Max Pool Size=200" but still it is giving the same error! so why is this happening ? and what can I do!
btw the timeout expired happens when a stored procedure is executed at the Fill method !
Thank you in advance
Hiba
Hi All,
I am facing a problem in SQL Server 2005 and the .NET Environment. I have an SP, which will return me the result within fraction of second when i execute it in SQL Server Management studio. But randomly (Frequently), its giving timeout when i execute it from .NET Envirnment.
If i execute it at that same time in Management studio, i am not getting the error. But getting the Timeout when i execute it in the Server Explorere of VS 2005 or in the Application which uses it.
Can any one figure out the solution.
Hi Team Iam working in a asp.net web application. In my system i have installed the xp as os and the in my network is of 2003 server. All files and database are there. But when me accessing the files from my laptop it shows the error as follows Timeout expired. The timeout period elapsed prior to completion of the
operation or the server is not responding.Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Timeout expired. The timeout period
elapsed prior to completion of the operation or the server is not
responding.Source Error:
Line 19: con = New SqlConnection(constring)Line 20: If con.State = ConnectionState.Open Then con.Close()Line 21: con.Open()Line 22: cmdobj = New SqlCommand(query, con) Source File:
Y:Inetpubwwwrootsreeskybuilderssreeskybuildersdbmain.vb Line:
21 If me accessing that same from that mechine there were no errors and i can go thru that program successfully. So please help me to do access the db from anywhere in my network Thanks Rajesh.C.S
Hi!
I am having a problem with my windows app in VB.net. I am just trying to do a very simple select command to retrieve some data. I am using a hosting server with a VPN.
When i click on the button it keeps giving me the error above. When I use server management express to do the same query it works fine and relatively fast.
So I have tried setting the CommandTimeout to 120 but when it stops, the debugger shows that the value of the COmmandTimeout is 30, although it stops after about 15 secs.
I am really lost and would need some help please! Find my code underneath.
Private Sub RetrieveButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RetrieveButton.Click
'Create a connection string to connect to the database. Associate it to a connection object.Dim connString As String = "Data Source=192.168.24.75;Initial Catalog=edenoverseasproperty;" & _
"Integrated Security=SSPI;User ID=edenoverseasproperty;Password=blossomcar"
'Dim connString As String = "Data Source=JPCHENOTSQLEXPRESS;Initial Catalog=EdenOverseasProperty;" & _
' "Integrated Security=SSPI;User ID=sa;"Dim sqlConn As New SqlConnection(connString)
'Create a new command and associate the connection object to it.Dim cmd As New SqlCommand()
cmd.CommandTimeout = 120
cmd = sqlConn.CreateCommand()
'Define the command type and the source
cmd.CommandType = CommandType.Text
cmd.CommandText = "SELECT * FROM Clients"
'Create a data adapter and a datasetDim da As New SqlDataAdapter()Dim ds As New DataSet()
da.SelectCommand = cmd
da.Fill(ds, "Clients")
'Bind the data to the datagrid
EdenDataGridView.DataSource = ds
EdenDataGridView.DataMember = "Clients"
End Sub
Jean-Philippe
HI,
I am getting this error on web server. My Appication is working fine on my Local Network where DB server and web server are on different machine. But getting TimeOut on web server. I tested the query on Query Analyzer it takes hardly 3 sec (Max) to execute. There is only Select query and total number of records are around 2100 which is not a big data.
I have used Connect Timeout = 180 in connection string which is also not effective.
please tell me how can I handle this exception.
We've been having timeout problems.
In our development environment we have IIS and SQL Server 2005 both running on the same box. We use VWD or our dev server's IIS to run the apps.
What happens is the database stops responding to our web applications and we continue to get the timeout error. I can still execute queries from Management Studio but all of the web apps all timeout.
Then, the only was we can get the database to start responding again is if we restart the SQL Server service.
Any ideas as to why the database would stop responding to all of the web apps but not Management Studio? It tends to happen a couple times a day when we are developing. Only the other developer and myself use the DEV environment.
Hi Dear,I have some problem.Problem Is:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.I have two table.1. BlogUrl2.HistoryBlogstable BlogUrl has approximate 30 url(some part of url).and table HistoryBlogs has approximate 2,00,000(2 lac) record.table history blog has a colon blogUrl and a colon subject name.when a user select one url from blogUrl table then display all subject related to blogUrl.it's ok.but i want select all blogUrl related subject.my query is:SSELECT distinct S.subject_id as 'id', cast(S.subject_raw as varchar(8000)) as 'subject' FROM HistoryBlogs S where substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, charindex('/', substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, len(cast(S.blog_url as varchar(8000) ) ) ) )-1 ) IN
('-' , 'discussions.apple.com' , 'feeds.gawker.com' ,
'legalalan.blogspot.com' , 'real.estatez.net' , 'szeteng.blogspot.com'
, 'willdo.philadelphiaweekly.com' , 'www.beginnertriathlete.com' ,
'www.bestbuy.ca' , 'www.bestbuy.com' , 'www.binsearch.info' ,
'www.centennialcollege.ca' , 'www.chatsusa.com' , 'www.dvinfo.net' ,
'www.feedhub.com' , 'www.futureshop.ca' , 'www.libble.com' ,
'www.mcdonalds.com' , 'www.monova.org' , 'www.net-security.org' ,
'www.osnews.com' , 'www.senecac.on.ca' , 'www.shop.com' ,
'www.sumotorrent.com' , 'www.theimpulsivebuy.com' ,
'www.tomshardware.com' , 'www.wal-mart.ca' , 'www.walmart.com' ,
'www.xbitlabs.com') group by S.Subject_Id,cast(S.Subject_Raw as
varchar(8000))This query is ok.but when we want select all blogUrl.then i found above mention errori have asp.net 2.0 and sql server 2000.this type problem i am facing on remote serverPlease help me.Yogesh Saini
Hi I am getting error:Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not respondingMy Connection string is like this. But still i am getting above error: <add key="ConnectionString" value="Initial Catalog=XX;DataBase=XX;Data Source=XX;User ID=XX;pwd=xx;Min Pool Size=5;Max Pool Size=225;Connection Reset=True;Connection Lifetime=180;"></add> Please advice me.Thanks-Dil
View 1 Replies View RelatedHi, I keep getting this error. I have a query that takes 47 seconds when I run it in SQL Server 2005. My connection string looks like this:connectionString="Server=server; Database=db; Pooling = true; Connect Timeout=60; Max Pool Size=300;I understand that Connect Timeout 60 = 60 minutes. Is there any other place where a timeout can be set in an ASP.NET 2.0 application?Thanks for any ideas.
View 6 Replies View RelatedHi....i got this error,I have already set in my connection string:----
Connect Timeout=300; pooling='true'; Max Pool Size=200;but i got this error till now,how can i solve this .......thanks
When I connect remotely to SQL SERVER 2005 the following error occurs.Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.thanks & regards priya.
View 2 Replies View Related"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Environment:-
Framework 1.1
DB:SQL Server 2000 (SQL Provider)
OS:Windows 2000
Language: VB.NET
I'm trying to do mass inserts/updates. Using Transactions. The table hierarchy contains 3 levels (TL1, TL2, and TL3):
Here is what I'm trying to accomplish:
1) Start Begin Transaction (in desperation, I've tried all the isolation levels- I was hoping ReadUncommitted would work!)
2) Do an Insert/Update in table TL1 (this works).
3) Grab the ID from step 2 and do a SELECT on table TL2 to determine if I need to an UPDATE or INSERT.
Since I'd be inserting 3 rows into table TL2 (for a particular parent ID with different types), the first SELECT (on TL2) works and then I'm able to do an INSERT into TL2. The transaction is still alive. Now, I try to do a SELECT on table TL2 to see if a record exists for this type and this is when I get the exception "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
My guess is that I have a LOCK on the table TL2 (from the first SELECT), which seems to be causing the problem.
Note:
The INSERTs and UPDATEs are done by executing stored procs.
For the SELECTS, I'm using a different connection (from the one which the transaction is using) and close it after the SELECT is executed.
Okay all this used to be fine on another machine it has jsut been moved. Original machineWindows 2003 server.Net 2.0Sql server 2005New machine Windows 2003 server.Net 2.0Sql server 2005Not that I don't see how this is a timeout setting issue as it shoudln't take but a second to access what it needs. It also workse fine on the original machine which is still up. I go to the website and try to login and get that error message. Says it timed out or server is not responding. below is the details.HERE IS THE ERROR IN EVENT VIEWER____________________________________________________Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 7/17/2005 3:26:38 AM
Event time (UTC): 7/17/2005 7:26:38 AM
Event ID: 1da418026f5641e8914bcafa571233c3
Event sequence: 10
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/Root/application1-127660587297031250
Trust level: Full
Application Virtual Path: /application
Application Path: D:Websitesapplication
Machine name: DATING
Process information:
Process ID: 3892
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE
Exception information:
Exception type: SqlException
Exception message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Request information:
Request URL: http://dating/application/Login.aspx
Request path: /application/Login.aspx
User host address: 192.168.1.20
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITYNETWORK SERVICE
Thread information:
Thread ID: 7
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: False
Stack trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at citimatch.Login.LoginButton_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.HERE IS THE ERROR IN INTERNET EXPLORER____________________________________________________Server Error in '/APPlication' Application.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684931 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +890 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601 System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 citimatch.Login.LoginButton_Click(Object sender, EventArgs e) +576 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +78 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5670
I am getting this error when I am modifying a table. I am trying to change the IDENTITY seed value for a column. How to handle this error.
Thanks.