When I try to update one table from another I get the following error
message, Does anyone know what may be the cause of the error :
Server: Msg 8152, Level 16, State 9, Line 1
String or binary data would be truncated.
The statement has been terminated.
Thanks
KUL
I am experiencing some frustration in regards to parsing an email that I need to work with.
(I don't have control over the format of the email I am receiving)
Any help would be appreciated.
Thank you
Jake
Here is the error I get, when I use the SQL Query Analyzer to process my Stored Procedure. (Not every email gets this error, just some, others process just fine.)
String or binary data would be truncated.
The statement has been terminated.
Stored Procedure: eResponse.dbo.spParser
Return Code = -6
My Code is as follows:
CREATE PROCEDURE spParser
@_id nvarchar(50)
AS
--assumes the email is no longer than 4000 characters. if it might be longer, bump this number up.
-- Common Varriables
DECLARE @body nvarchar(4000)
DECLARE @i int
DECLARE @phone nvarchar(50)
DECLARE @phonestart int
DECLARE @phoneend int
DECLARE @email nvarchar(50)
DECLARE @emailstart int
DECLARE @emailend int
DECLARE @comments nvarchar(3000)
DECLARE @commentsstart int
DECLARE @commentsend int
DECLARE @OrigID varchar(50)
-- Jose Ole Variables
DECLARE @firstname nvarchar(50)
DECLARE @firstnamestart int
DECLARE @firstnameend int
DECLARE @lastname nvarchar(50)
DECLARE @lastnamestart int
DECLARE @lastnameend int
DECLARE @address1 nvarchar(50)
DECLARE @address1start int
DECLARE @address1end int
DECLARE @address2 nvarchar(50)
DECLARE @address2start int
DECLARE @address2end int
DECLARE @city nvarchar(50)
DECLARE @citystart int
DECLARE @cityend int
DECLARE @state nvarchar(5)
DECLARE @statestart int
DECLARE @stateend int
DECLARE @zip nvarchar(15)
DECLARE @zipstart int
DECLARE @zipend int
DECLARE @country nvarchar(50)
DECLARE @countrystart int
DECLARE @countryend int
DECLARE @phone2 nvarchar(50)
DECLARE @phone2start int
DECLARE @phone2end int
DECLARE @productname nvarchar(50)
DECLARE @productnamestart int
DECLARE @productnameend int
DECLARE @upccode nvarchar(50)
DECLARE @upccodestart int
DECLARE @upccodeend int
DECLARE @datecode nvarchar(50)
DECLARE @datecodestart int
DECLARE @datecodeend int
DECLARE @purchaseat nvarchar(50)
DECLARE @purchaseatstart int
DECLARE @purchaseatend int
DECLARE @purchasecity nvarchar(50)
DECLARE @purchasecitystart int
DECLARE @purchasecityend int
DECLARE @datepurchased nvarchar(50)
DECLARE @datepurchasedstart int
DECLARE @datepurchasedend int
DECLARE @dateopened nvarchar(50)
DECLARE @dateopenedstart int
DECLARE @dateopenedend int
DECLARE @subject nvarchar(50)
DECLARE @subjectstart int
DECLARE @subjectend int
-- Windosr Variables
DECLARE @name nvarchar(50)
DECLARE @namestart int
DECLARE @nameend int
DECLARE @company nvarchar(50)
DECLARE @companystart int
DECLARE @companyend int
--First replace all ASCII carriage returns and line feeds and assign the whole chunk of data to a variable.
SET @body = (select replace( REPLACE(convert(varchar(4000), message),CHAR(10),' '),CHAR(13),'') from message where mailid = @_id)
--below is the sample syntax for the individual replacements of line feeds and carriage returns, but it's combined into one statement above.
--SELECT REPLACE(@jb,CHAR(10),'') as firstpass
--SELECT REPLACE(@jb,CHAR(13),'') as secondpass
IF left(@body,47) = 'Fromubject:contact info sent from samplesite.com'
--If this is true.. then it is a sample company.
BEGIN
--The 12 in the start is compensating for the 12 Characters of "First Name: "
--Below is collecting First Name
SET @firstnamestart = (CHARINDEX('First name:',@body) + 11)
SET @firstnameend = (CHARINDEX('Last name:',@body) - 1)
SET @firstname = SUBSTRING(@body,@firstnamestart,@firstnameend-@firstnamestart)
----Below is collecting Last Name
SET @lastnamestart = (CHARINDEX('Last name:',@body) + 10)
SET @lastnameend = (CHARINDEX('Address 1:',@body) - 1)
SET @lastname = SUBSTRING(@body,@lastnamestart,@lastnameend-@lastnamestart)
--Below is collecting Address1
SET @address1start = (CHARINDEX('Address 1:',@body) + 10)
SET @address1end = (CHARINDEX('Address 2:',@body) - 1)
SET @address1 = SUBSTRING(@body,@address1start,@address1end-@address1start)
--Below is collecting Address2
SET @address2start = (CHARINDEX('Address 2:',@body) + 10)
SET @address2end = (CHARINDEX('City:',@body) - 1)
SET @address2 = SUBSTRING(@body,@address2start,@address2end-@address2start)
--Below is collecting city information
SET @citystart = (CHARINDEX('City:',@body) + 5)
SET @cityend = (CHARINDEX('State/Prov',@body) -1)
SET @city = SUBSTRING(@body,@citystart,@cityend-@citystart)
--Below is collecting state information
SET @statestart = (CHARINDEX('State/Province:',@body) + 15)
SET @stateend = (CHARINDEX('Zip/Postal',@body) -1)
SET @state = SUBSTRING(@body,@statestart,@stateend-@statestart)
--Below is collecting zip information
SET @zipstart = (CHARINDEX('Zip/Postal Code:',@body) + 16)
SET @zipend = (CHARINDEX('Country',@body) -1)
SET @zip = SUBSTRING(@body,@zipstart,@zipend-@zipstart)
--Below is collecting country information
SET @countrystart = (CHARINDEX('Country:',@body) + 8)
SET @countryend = (CHARINDEX('E-mail address',@body) -1)
SET @country = SUBSTRING(@body,@countrystart,@countryend-@countrystart)
--Below is collecting email information
SET @emailstart = (CHARINDEX('E-mail address:',@body) + 15)
SET @emailend = (CHARINDEX('Daytime',@body) -1)
SET @email = SUBSTRING(@body,@emailstart,@emailend-@emailstart)
--Below is collecting phone information
SET @phonestart = (CHARINDEX('Daytime Phone:',@body) + 14)
SET @phoneend = (CHARINDEX('Evening Phone:',@body) -1)
SET @phone = SUBSTRING(@body,@phonestart,@phoneend-@phonestart)
--Below is collecting phone2 information
SET @phone2start = (CHARINDEX('Evening Phone:',@body) + 14)
SET @phone2end = (CHARINDEX('Product Name',@body) -1)
SET @phone2 = SUBSTRING(@body,@phone2start,@phone2end-@phone2start)
--Below is collecting Product Name information
SET @productnamestart = (CHARINDEX('Product Name:',@body) + 12)
SET @productnameend = (CHARINDEX('UPC Code:',@body) -1)
SET @productname = SUBSTRING(@body,@productnamestart,@productnameend-@productnamestart)
--Below is collecting UPC Code information
SET @upccodestart = (CHARINDEX('UPC Code:',@body) + 9)
SET @upccodeend = (CHARINDEX('Date Code:',@body) -1)
SET @upccode = SUBSTRING(@body,@upccodestart,@upccodeend-@upccodestart)
--Below is collecting Date Code information
SET @datecodestart = (CHARINDEX('Date Code:',@body) + 10)
SET @datecodeend = (CHARINDEX('Purchased At',@body) -1)
SET @datecode = SUBSTRING(@body,@datecodestart,@datecodeend-@datecodestart)
--Below is collecting Purchase At information
SET @purchaseatstart = (CHARINDEX('Purchased At',@body) + 26)
SET @purchaseatend = (CHARINDEX('Purchase City:',@body) -1)
SET @purchaseat = SUBSTRING(@body,@purchaseatstart,@purchaseatend-@purchaseatstart)
--Below is collecting Purchase City information
SET @purchasecitystart = (CHARINDEX('Purchase City:',@body) + 14)
SET @purchasecityend = (CHARINDEX('Date Purchased',@body) -1)
SET @purchasecity = SUBSTRING(@body,@purchasecitystart,@purchasecityend-@purchasecitystart)
--Below is collecting Date Purchased information
SET @datepurchasedstart = (CHARINDEX('Date Purchased:',@body) + 15)
SET @datepurchasedend = (CHARINDEX('Date Opened',@body) -1)
SET @datepurchased = SUBSTRING(@body,@datepurchasedstart,@datepurchasedend-@datepurchasedstart)
--Below is collecting Date Opened information
SET @dateopenedstart = (CHARINDEX('Date Opened:',@body) + 12)
SET @dateopenedend = (CHARINDEX('E-mail Subject:',@body) -1)
SET @dateopened = SUBSTRING(@body,@dateopenedstart,@dateopenedend-@dateopenedstart)
--Below is collecting Email Subject information
SET @subjectstart = (CHARINDEX('E-mail Subject:',@body) + 15)
SET @subjectend = (CHARINDEX('Comments:',@body) -1)
SET @subject = SUBSTRING(@body,@subjectstart,@subjectend-@subjectstart)
--Below is collecting message information
SET @commentsstart = (CHARINDEX('Comments:',@body) + 10)
SET @commentsend = len(@body)
SET @comments = SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)
--below is the part that actually writes the data out to the Output table
INSERT INTO OutputEmails
(FirstName, LastName, Address1, Address2, City, State, Zip, Country, eMail, Phone, Phone2, ProductName, UPCCode, DateCode, PurchaseAt, PurchaseCity, DatePurchased, DateOpened, Subject, Comments, OrigID)
SELECT
ltrim(SUBSTRING(@body,@firstnamestart,@firstnameend-@firstnamestart)) as FirstName,
ltrim(SUBSTRING(@body,@lastnamestart,@lastnameend-@lastnamestart)) as LastName,
ltrim(SUBSTRING(@body,@address1start,@address1end-@address1start)) as Address1,
ltrim(SUBSTRING(@body,@address2start,@address2end-@address2start)) as Address2,
ltrim(SUBSTRING(@body,@citystart,@cityend-@citystart)) as City,
ltrim(SUBSTRING(@body,@statestart,@stateend-@statestart)) as State,
ltrim(SUBSTRING(@body,@zipstart,@zipend-@zipstart)) as Zip,
ltrim(SUBSTRING(@body,@countrystart,@countryend-@countrystart)) as Country,
ltrim(SUBSTRING(@body,@emailstart,@emailend-@emailstart)) as eMail,
ltrim(SUBSTRING(@body,@phonestart,@phoneend-@phonestart)) as Phone,
ltrim(SUBSTRING(@body,@phone2start,@phone2end-@phone2start)) as Phone2,
ltrim(SUBSTRING(@body,@productnamestart,@productnameend-@productnamestart)) as ProductName,
ltrim(SUBSTRING(@body,@upccodestart,@upccodeend-@upccodestart)) as UPCCode,
ltrim(SUBSTRING(@body,@datecodestart,@datecodeend-@datecodestart)) as DateCode,
ltrim(SUBSTRING(@body,@purchaseatstart,@purchaseatend-@purchaseatstart)) as PurchaseAt,
ltrim(SUBSTRING(@body,@purchasecitystart,@purchasecityend-@purchasecitystart)) as PurchaseCity,
ltrim(SUBSTRING(@body,@datepurchasedstart,@datepurchasedend-@datepurchasedstart)) as DatePurchased,
ltrim(SUBSTRING(@body,@dateopenedstart,@dateopenedend-@dateopenedstart)) as DateOpened,
ltrim(SUBSTRING(@body,@subjectstart,@subjectend-@subjectstart)) as Subject,
ltrim(SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)) as Comments,
@_id as OrigID
FROM dbo.message
WHERE (mailId = @_id)
END
ELSE BEGIN
--below prints the whole value in the debugger (SQL Query Analyzer)
--print @body
--below prints the length of the whole value
--print len(@body)
--below prints the location of 'Callers Name:'
--Print CHARINDEX('Name: ',@body)
--Below is collecting the Name information
--The 6 in the start is compensating for the 6 Characters of "Name: "
SET @namestart = (CHARINDEX('Name:',@body) + 5)
SET @nameend = (CHARINDEX('Email:',@body) - 1)
SET @name = SUBSTRING(@body,@namestart,@nameend-@namestart)
--Below is collecting email information
SET @emailstart = (CHARINDEX('Email:',@body) + 6)
SET @emailend = (CHARINDEX('Title:',@body) -1)
SET @email = SUBSTRING(@body,@emailstart,@emailend-@emailstart)
--Below is collecting Company information
SET @companystart = (CHARINDEX('Company:',@body) + 8)
SET @companyend = (CHARINDEX('Phone Number:',@body) -1)
SET @company = SUBSTRING(@body,@companystart,@companyend-@companystart)
--Below is collecting phone information
SET @phonestart = (CHARINDEX('Phone Number:',@body) + 13)
SET @phoneend = (CHARINDEX('Comments:',@body) -1)
SET @phone = SUBSTRING(@body,@phonestart,@phoneend-@phonestart)
--Below is collecting message information
SET @commentsstart = (CHARINDEX('Comments:',@body) + 9)
SET @commentsend = len(@body)
SET @comments = SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)
--below is the part that actually writes the data out to the Output table
INSERT INTO OutputEmails
(Name, eMail, Company, Phone, Comments, OrigID)
SELECT
ltrim(SUBSTRING(@body,@namestart,@nameend-@namestart)) as Name,
ltrim(SUBSTRING(@body,@emailstart,@emailend-@emailstart)) as eMail,
ltrim(SUBSTRING(@body,@companystart,@companyend-@companystart)) as Company,
ltrim(SUBSTRING(@body,@phonestart,@phoneend-@phonestart)) as Phone,
ltrim(SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)) as Comments,
@_id as OrigID
FROM dbo.message
WHERE (mailId = @_id)
END
--At the very end when you're satisfied that the data has been processed properly, delete the appropriate message record from the message table
DELETE FROM MESSAGE Where message.mailID = @_ID
GO
Sample Data that has problems
Fromubject:contact info sent from samplesite.comBody:First name: Sample
Last name: Name
Address 1: 123 Testing Road
Address 2: Don't filled
City: Park Forest
State/Province: FL
Zip/Postal Code: 12345-1234
Country: USA
E-mail address: validemail@email.com
Daytime Phone: 123-123-1234
Evening Phone: Don't filled
Product Name: Sample Product with Cheese
UPC Code: 12345-89521
Date Code: 1251237 D PST . 5290
Purchased At (Store Name): StoreName
Purchase City: Store City
Date Purchased: 12/8/2007
Date Opened: 12/14/2007
E-mail Subject: nail in product
Comments: when I purchased your product, there was something in it. Obviously I am not happy about this. Please contact me. Thank you John Q Public
Simple SQL Error Can anyone help for a new starter. Error MessageServer: Msg 209, Level 16, State 1, Line 6 Ambiguous column name 'CustomerID'.Codeselect CustomerID, ContactName, OrderId from CustomersInner Join Orders OnCustomers.CustomerID = Orders.CustomerIDDBMS = SQL Server 2000 SP 3aDatabase = NorthwindI have no idea why i receive this error
View 1 Replies View RelatedHi, I would appreciate your help. I donot know why I am getting this error when I run this query :
if (select SUBSTRING(de_ftpdownload,1,CHARINDEX('.',de_ftpdow nload,0)-1)as de_ftpdownload from vendor_invoice)
<> (select stamp_number from vendor_invoice)
select 'no'
else
select 'yes'
I get this Error
Server: Msg 536, Level 16, State 3, Line 1
Invalid length parameter passed to the substring function.
----
yes
(1 row(s) affected)
I would appreciate your hlep
Al
Can anybody help me with this syntax?
select
PHN.N_PHN_ID 'ID',
PHN.N_PHN_AREACD 'AREAD1',
PHN.N_PHN_PREFIX 'PREFIXD1',
PHN.N_PHN_NUMBER 'NBRD1',
PHN.N_PHN_EXTENTN 'EXTD1',
PHN2.N_PHN_AREACD 'AREAD2',
PHN2.N_PHN_PREFIX 'PREFIXD2',
PHN2.N_PHN_NUMBER 'NBRD2',
PHN2.N_PHN_EXTENTN 'EXTD2'
from Donor_Visit2 DV2 RIGHT OUTER JOIN NAT_PHN_DB_REC PHN
ON DV2.COUNT_INSTID = PHN.N_PHN_INSTID
RIGHT OUTER JOIN NAT_PHN_DB_REC PHN2
ON DV2.COUNT_ID = PHN2.PHN.N_PHN_ID
order by PHN.N_PHN_ID
here is the error message:
Server: Msg 107, Level 16, State 2, Line 1
The column prefix 'PHN2.PHN' does not match with a table name or alias name used in the query.
Hello All,
This table was created by coldfusion and has been given all priviliges to public and I am in the public group but I still cant select from it. It gives me this error message: Server: Msg 208, Level 16, State 1, Line 1. Help!
Thanks in Advance.
If we run the query below with the values of 'rml' and 'ra' it runs but if we use 'cca' and 'cc' we get this error:
Server: Msg 1101, Level 17, State 10, Line 8
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
Here is the query
Declare @Level_1 varchar(3),
@Level_2 varchar(2)
Select @Level_1 = 'cca'
Select @Level_2 = 'cc'
select distinct tblAsset.State, tblAsset.County, tblAsset.Plant, tblAsset.Account,
tblAsset.Acq_Yr, tblAsset.Acq_Pd, tblAsset_Book.Cost_Original,
tblCounty_Names.County_Name, CER..tblLocation.Location,
tblGL_Account.Account_Desc
from tblAsset, tblAsset_Book, tblCounty_Names, CER..tblLocation, tblGL_Account
where tblAsset_Book.Level_1 = @Level_1
and tblAsset.Level_1 = tblAsset_Book.Level_1
and tblAsset_Book.Level_2 = @Level_2
and tblAsset.Level_2 = tblAsset_Book.Level_2
and tblGL_Account.Company = tblAsset.Level_2
and CER..tblLocation.SBU = tblGL_Account.Company
and tblCounty_Names.County = tblAsset.County
and CER..tblLocation.County = tblCounty_Names.County
and CER..tblLocation.Code = tblAsset.Plant
and tblGL_Account.Account = tblAsset.Account
and tblAsset_Book.Book_Number = '1'
order by tblAsset.State
Dear All participants.
My distribution log file size is reached upto 33GB, What I should do?
Any clue or helps are too appreciable.
Thanks
R.Mall
i have sp4 install. Anyone know how to fix it?
Server: Msg 2537, Level 16, State 43, Line 1
Table error: Object ID 1376776012, index ID 0, page (1:56868), row 2. Record check (Valid SqlVariant) failed. Values are 7 and 0.
Server: Msg 2537, Level 16, State 1, Line 1 ... so on
=============================
http://www.sqlserverstudy.com
Dear (and mighty) all:I backed up a database (SQL server 7.0) and tried to restore it onanother system (SQL Server 2000). This is not the first time I'm doingthis and never had a problem before:-- in the source dbBACKUP db_icoaraci TO DISK = 'C:TEMPBACKUP-ICOARACI.DAT'--in the destination dbRESTORE db_icoaraci FROM DISK='E:TEMPBACKUP-ICOARACI.DAT'WITH MOVE='ICOARACI_DAT' TO 'E:DBICOARACI.MDF',MOVE='ICOARACI_LOG' TO 'E:DBICOARACI.LDF'Today, to my surprise, the destination SQL returned the followingerror:Processed 25592 pages for database 'db_icoaraci', file 'ICOARACI_DAT'on file 1.Processed 1 pages for database 'db_icoaraci', file 'ICOARACI_LOG' onfile 1.Server: Msg 1105, Level 17, State 2, Line 1Could not allocate space for object '(SYSTEM table id: 6)' in database'db_icoaraci' because the 'PRIMARY' filegroup is full.Server: Msg 3013, Level 16, State 1, Line 1RESTORE DATABASE is terminating abnormally.I searched the list and a found a few posts refering to the same error,but none in the exactly same scenario.I tried to restore the database with NORECOVERY, and, before restoringthe log, increase its size (ALTER DATABASE ... etc), but SQL Serversays that the DB couldn't be open because it's in the middle of arestore...I'll appreciate any help.Regards,Branco.
View 3 Replies View RelatedG'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
View 3 Replies View RelatedAs an 'SA' I thought that you have permission to do anything on the server. Running an update command from Query Analyzer is throwing this error:
SQL Server 2000 SP3
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
The table is in the dbo schema.
Has anyone seen this error before?
I have a stored procedure that takes 18 hours to complete. SometimesI get the below error message when I run the stored procedure.'Server : Msg 9002, Level 17, State 6, Line 1 The log file fordatabase 'Customer' is full. Back up the transaction log for thedatabase to free up some log space.'.I checked my log file and it is not full. And I don't know why I amgetting this message. Any help is appreciated.Thanks,Anjula
View 2 Replies View RelatedHi,I am getting the following error from the query below against SQLServer 8.00.2039 (SP4)Error:====Server: Msg 107, Level 16, State 2, Line 1The column prefix 'd' does not match with a table name or alias nameused in the query.Select Statement:=============select ....from trades a,gems_product_groups b,portfolio_nav_mapping c,products d,limit_types eleft outer join gems_prod_trade_mod f on d.product_id =f.product_IDI know this was a known bug in MS-SQL7, but I thought it had been fixedin 2000.Can anyone help?Thanks
View 3 Replies View RelatedI'm getting this error in SQL server.
Msg 8101, Level 16, State 1, Line 68
An explicit value for the identity column in table 'temp_notes' can only be specified when a column list is used and IDENTITY_INSERT is ON.
My original script looked like this.
SET NOCOUNT ON
DECLARE @patient_id int
,@phn varchar(9)
,@full_name varchar(100)
,@birth_date datetime
,@entry_note varchar(8000)
,@entry_date datetime
,@rec_counter int
,@Clinic_identifier varchar(24)
,@chart_count int
set @Clinic_identifier = 'MEDOWL.'
set @rec_counter = 0
DECLARE patients_cursor CURSOR FOR
SELECT a.full_name, a.birth_date, a.phn, a.patient_id
FROM patient as a
,clinicdoctors as b
WHERE a.patient_id IN (51450,49741,57290) --= 51450
and datalength(a.phn) = 9
and b.clinicdoctor_id = a.clinicdoctor_id
ORDER BY a.last_name,a.first_name,a.patient_id
OPEN patients_cursor
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE chartcount_cursor CURSOR FOR
select count(*)
from ChartEntries
where patient_id = @patient_id
OPEN chartcount_cursor
FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
DECLARE chartentries_cursor CURSOR FOR
select entry_datetime,entry_note
from ChartEntries
where patient_id = @patient_id
order by Patient_id, ChartEntry_Id desc
-- Variable value from the outer cursor
OPEN chartentries_cursor
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
WHILE @@FETCH_STATUS = 0
BEGIN
set @rec_counter = @rec_counter + 1
--select @@FETCH_STATUS as status
IF @@FETCH_STATUS = 0
insert into temp_notes
values (@Clinic_identifier+@phn+'.'
+convert(varchar,@rec_counter)+'.'
+convert(varchar,@chart_count),
@phn,
@full_name,
@birth_date,
@entry_date,
@entry_note
)
-- Get the next entry note
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
END
CLOSE chartentries_cursor
DEALLOCATE chartentries_cursor
CLOSE chartcount_cursor
DEALLOCATE chartcount_cursor
set @rec_counter = 0
set @chart_count = 0
-- Get the next patient record
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
-- Get the next chart record count
--FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
END
CLOSE patients_cursor
DEALLOCATE patients_cursor
GO
I then changed it to left pad the variables @rec_counter and @chart_count.
SET NOCOUNT ON
DECLARE @patient_id int
,@phn varchar(9)
,@full_name varchar(100)
,@birth_date datetime
,@entry_note varchar(8000)
,@entry_date datetime
,@rec_counter int
,@Clinic_identifier varchar(24)
,@chart_count int
set @Clinic_identifier = 'MEDOWL.'
set @rec_counter = 0
DECLARE patients_cursor CURSOR FOR
SELECT a.full_name, a.birth_date, a.phn, a.patient_id
FROM patient as a
,clinicdoctors as b
WHERE a.patient_id IN (51450,49741,57290) --= 51450
and datalength(a.phn) = 9
and b.clinicdoctor_id = a.clinicdoctor_id
ORDER BY a.last_name,a.first_name,a.patient_id
OPEN patients_cursor
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE chartcount_cursor CURSOR FOR
select count(*)
from ChartEntries
where patient_id = @patient_id
OPEN chartcount_cursor
FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
DECLARE chartentries_cursor CURSOR FOR
select entry_datetime,entry_note
from ChartEntries
where patient_id = @patient_id
order by Patient_id, ChartEntry_Id desc
-- Variable value from the outer cursor
OPEN chartentries_cursor
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
WHILE @@FETCH_STATUS = 0
BEGIN
set @rec_counter = @rec_counter + 1
--select @@FETCH_STATUS as status
IF @@FETCH_STATUS = 0
insert into temp_notes
values (@Clinic_identifier+@phn+'.'
+REPLICATE('0',3),convert(varchar,@rec_counter)+'. '
+REPLICATE('0',3),convert(varchar,@chart_count),
@phn,
@full_name,
@birth_date,
@entry_date,
@entry_note
)
-- Get the next entry note
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
END
CLOSE chartentries_cursor
DEALLOCATE chartentries_cursor
CLOSE chartcount_cursor
DEALLOCATE chartcount_cursor
set @rec_counter = 0
set @chart_count = 0
-- Get the next patient record
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
-- Get the next chart record count
--FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
END
CLOSE patients_cursor
DEALLOCATE patients_cursor
GO
That is when I received the error, so I inserted this command before the insert line but it made no difference.
SET IDENTITY_INSERT temp_notes ON
insert into temp_notes
values (@Clinic_identifier+@phn+'.'
+REPLICATE('0',3),convert(varchar,@rec_counter)+'. '
+REPLICATE('0',3),convert(varchar,@chart_count),
@phn,
@full_name,
@birth_date,
@entry_date,
@entry_note
)
I'm concatenating four different variables together to insert into the column note_id.
What is the problem? I just don't see it. My table definition looks like this.
CREATE TABLE [dbo].[temp_notes](
[temp_Id] [int] IDENTITY(1,1) NOT NULL,
[note_Id] [varchar](24) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[phn] [char](9) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[full_name] [varchar](100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[birth_date] [datetime] NULL,
[entry_datetime] [datetime] NULL,
[Entry_Note] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_temp_notes] PRIMARY KEY CLUSTERED
(
[temp_Id] ASC
) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
Error 4305
What would be the cause of this error?
Msg 4305, Level 16, State 1, Line 1
The log in this backup set begins at LSN 8229000000047200001, which is too recent to apply to the database. An earlier log backup that includes LSN 8219000000021400001 can be restored
And what would the fix be?
I am trying to restore from a Full Backup and then the log files on a development machine.
Cheers,
Casey
Hi,
I have built a stored procedure and the code is like below:
Code Snippet
DECLARE @Table_Name VARCHAR(100)
DECLARE @Table_Desc SQL_VARIANT
DECLARE @Query VARCHAR(8000)
USE HRD
SELECT @Table_Name = 'Employee'
SELECT @Query = 'IF EXISTS (SELECT * FROM sys.triggers WHERE object_id = OBJECT_ID(N''[dbo].[DEL_' + UPPER(@Table_Name) + ']''))
DROP TRIGGER [dbo].[DEL_' + UPPER(@Table_Name) + ']'
EXEC(@Query)
SELECT @Table_Desc = (SELECT a.value
FROM
sys.extended_properties a, sys.tables b
WHERE a.major_id = b.object_id
AND a.minor_id = 0
AND a.name = 'MS_DESCRIPTION'
AND b.name = @Table_Name)
SELECT @Query = '''CREATE TRIGGER [DEL_' + UPPER(@Table_Name) + '] ON dbo.' + @Table_Name + '
FOR DELETE
AS
DECLARE @Old_Value VARCHAR(8000)
DECLARE @New_Value VARCHAR(8000)
DECLARE @P_Key VARCHAR(8000)
DECLARE @P_Key_Value VARCHAR(8000)
DECLARE @P_Key_Insert VARCHAR(8000)
DECLARE @Comment VARCHAR(8000)
SELECT @P_Key_Insert = ''''''''
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_PrimKey]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_PrimKey]'''')
SELECT K.COLUMN_NAME INTO Temp_PrimKey
FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS T
INNER JOIN INFORMATION_SCHEMA.KEY_COLUMN_USAGE K
ON T.CONSTRAINT_NAME = K.CONSTRAINT_NAME
WHERE
T.CONSTRAINT_TYPE = ''''PRIMARY KEY'''' AND T.TABLE_NAME = ''''' + @Table_Name + '''''
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Value]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Value]'''')
EXEC(''''CREATE TABLE [dbo].[Temp_Value](
[PValue] [VARCHAR](max) NOT NULL
) ON [PRIMARY]'''')
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Deleted]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Deleted]'''')
SELECT * INTO Temp_Deleted FROM deleted
DECLARE Curs_PrimKey CURSOR FOR
SELECT * FROM Temp_PrimKey
OPEN Curs_PrimKey
FETCH NEXT FROM Curs_PrimKey INTO @P_Key
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC(''''INSERT INTO Temp_Value SELECT ''''+ @P_Key + '''' FROM Temp_Deleted'''')
SELECT @P_Key_Value = (SELECT PValue FROM Temp_Value)
EXEC(''''DELETE FROM Temp_Value'''')
SELECT @P_Key_Insert = @P_Key_Insert + @P_Key + '''' = '''' + @P_Key_Value + '''', ''''
FETCH NEXT FROM Curs_PrimKey INTO @P_Key
END
CLOSE Curs_PrimKey
DEALLOCATE Curs_PrimKey
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Deleted]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Deleted]'''')
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Value]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Value]'''')
SELECT @P_Key_Insert = LEFT(@P_Key_Insert, LEN(@P_Key_Insert)-2)
SELECT @Comment = ''''' + CAST(@Table_Desc AS VARCHAR) + ' deleted, '''' + @P_Key_Insert
INSERT INTO TLOG(Log_Date, Log_Reference, Log_Comment)
VALUES (GETDATE(), @P_Key_Insert, @Comment)
'''
--PRINT @Query
EXEC(@Query)
Problem is when I run it gives error:
Msg 102, Level 15, State 1, Line 1Incorrect syntax near 'CREATE TRIGGER [DEL_EMPLOYEE] ON dbo.Employee FOR DELETEAS DECLARE @Old_Value VARCHAR(8000)DECLARE @New_Value VARCHA'.
If I print the @Query and run it in a query analyzer using the statement EXEC it worked. It's giving me headache, this supposed to be a simple exec statement. Please advise. Thanks.
Hello Folks,
I am moving the model & Msdb databases to a different location and I have this error.
Thanks
Msg 3710, Level 16, State 1, Line 1
Cannot detach an opened database when the server is in minimally configured mode.
Dear All, I always got this error in CLR TVF:
Msg 6260, Level 16, State 1, Line 1
An error occurred while getting new row from user defined Table Valued Function :
System.InvalidOperationException: Invalid attempt to FieldCount when reader is closed.
System.InvalidOperationException:
at System.Data.SqlClient.SqlDataReaderSmi.get_FieldCount()
at System.Data.Common.DbEnumerator.BuildSchemaInfo()
at System.Data.Common.DbEnumerator.MoveNext()
Here is my code:
using System;
using System.Data;
using System.Data.Common;
using System.Data.SqlTypes;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
using System.Collections;
public static class UserDefinedFunctions
{
[Microsoft.SqlServer.Server.SqlFunction(FillRowMethodName = "rowfiller",DataAccess=DataAccessKind.Read,TableDefinition = "ActID int, ActName nvarchar(50), ActCreatorID int,ActDesp nvarchar(200),ActCreateDate datetime,ActModifyDate datetime, ActStartDate datetime, ActEndDate datetime, Status int, Cost int")]
public static IEnumerable Func_GetSchCatActivityIDTable(int CatActivityID)
{
using (SqlConnection connection = new SqlConnection("context connection=true"))
{
string sqlstring = "select * from Activity where CatActivityID=@CatActivityID;";
connection.Open();
SqlCommand command = new SqlCommand(sqlstring, connection);
command.Parameters.AddWithValue("@CatActivityID", CatActivityID);
return command.ExecuteReader(CommandBehavior.CloseConnection);
}
}
[System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft Performance","CA1811:AvoidUncalledPrivateCode")]
public static void rowfiller(Object obj,
out SqlInt32 ActID,
out SqlString ActName,
out SqlInt32 ActCreatorID,
out SqlString ActDesp,
out SqlDateTime ActCreateDate,
out SqlDateTime ActModifyDate,
out SqlDateTime ActStartDate,
out SqlDateTime ActEndDate,
out SqlInt32 Status,
out SqlInt32 Cost,
)
{
SqlDataRecord row = (SqlDataRecord)obj;
int column = 0;
ActID = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
ActName = (row.IsDBNull(column)) ? SqlString.Null : new SqlString(row.GetString(column)); column++;
ActCreatorID = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
ActDesp = (row.IsDBNull(column)) ? SqlString.Null : new SqlString(row.GetString(column)); column++;
ActCreateDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
ActModifyDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
ActStartDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
ActEndDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
Status = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
Cost = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
}
};
Can anyone tell me what I am doing wrong? Many thanks
.
Hello,
I am using SQL express as a backend for my websites and my accounting software.
When installing my new app I run the install.sql file and all is good untill the end.
the following error occurs. Can someone direct me where to look to fix this please?
Msg 102, Level 15, State 1, Procedure dni_invoices_get, Line 37
Incorrect syntax near '.'.
Thanks eveningjazz
I restored a database to my test server from a production server. I ran "sp_change_users_login 'report' " and found 1 orphan id. Then I ran "sp_change_users_login 'auto_fix', 'orphan_id' ". It gets the error. I have run it before with success. Any idea why this time is different?
I'm getting a specific error when i try to run a .sql script for a Custom TableProfile from the Asp.net site,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following errors::
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
How can i fix this??
Thxs in Advance Rattlerr
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "dbo.JOB40115_Cost_Actindx.ACTINDX" could not be bound.
UPDATE dbo.JOB40115 set dbo.JOB40115.JOB_Cost_Index = dbo.JOB40115_Cost_Actindx.ACTINDX
SELECT JOB40115.ProjctID, JOB40115.SubLevel1, JOB40115.SubLevel2, JOB40115.CostCategorie, JOB40115.DepartementID, JOB40115.JOB_Cost_Index,
JOB40115_Cost_Actindx.ACTINDX, JOB40115_Cost_Actindx.ProjctID AS Expr1, JOB40115_Cost_Actindx.SubLevel1 AS Expr2,
JOB40115_Cost_Actindx.SubLevel2 AS Expr3, JOB40115_Cost_Actindx.DepartementID AS Expr4,
JOB40115_Cost_Actindx.CostCategorie AS Expr5
FROM JOB40115 INNER JOIN
JOB40115_Cost_Actindx ON JOB40115.ProjctID = JOB40115_Cost_Actindx.ProjctID AND
JOB40115.SubLevel1 = JOB40115_Cost_Actindx.SubLevel1 AND JOB40115.SubLevel2 = JOB40115_Cost_Actindx.SubLevel2 AND
JOB40115.CostCategorie = JOB40115_Cost_Actindx.CostCategorie AND JOB40115.DepartementID = JOB40115_Cost_Actindx.DepartementID
we config our SAP system to use SQL Server 2005 database mirror. but the mirror server hang by accident, after restart mirror server,the server return to normal,but the mirror can't be resume.
ALTER DATABASE R3P
SET PARTNER resume
the error is:
Msg 1447, Level 16, State 21, Line 1
ALTER DATABASE "R3P" command cannot be executed until both partner server instances are up, running, and connected. Start the partner and reissue the command.
Here is a Database script I wrote: I can't figure out what the problem is when I declare my primary Keys in the second and third table.
Thanks in Advance
Errors:
Msg 156, Level 15, State 1, Line 19
Incorrect syntax near the keyword 'IDENTITY'.
Msg 156, Level 15, State 1, Line 29
Incorrect syntax near the keyword 'IDENTITY'.
CREATE DATABASE GoGreen
Go
USE GoGreen
Create TABLE Student
(StudentID INT NOT NULL IDENTITY PRIMARY KEY, <---no Error here
DrivePassCode char(3) NOT NULL,
LName varchar(50) NOT NULL,
FName varchar(50) NOT NULL,
Address1 varchar(50) NOT NULL,
Address2 varchar(50) NULL,
City varchar(50) NOT NULL,
PostalCode varchar(20) NOT NULL,
PhoneNumber varchar(50) NOT NULL,
Email varchar(50) NOT NULL,
Smoker char(2) NOT NULL,
NearestCityOrTown varchar(50) NOT NULL,
PaymentType varchar(20) NOT NULL,)
CREATE TABLE CoordinatedRideShare
(RideID INT NOT NULL, IDENTITY PRIMARY KEY, <---Error #1
StudentID INT NOT NULL REFERENCES Student(StudentID)
[ON DELETE {CASCADE}]
[ON UPDATE {CASCADE}],
M-W ARRIVAL TIME smalldatetime NOT NULL,
M-W DEPART TIME smalldatetime NOT NULL,
T-TH ARRIVAL TIME smalldatetime NOT NULL,
T-TH DEPART TIME smalldatetime NOT NULL,)
CREATE TABLE MeetingLocation
(LocationID INT NOT NULL, IDENTITY PRIMARY KEY AUTONUMBER, <---Error#2
RideID INT NOT NULL REFERENCES Coordinated RideShare(RideID)
[ON DELETE {CASCADE}]
[ON UPDATE {CASCADE}],
House Pickup char(1) NULL,
General meeting place varchar(50) NULL,)
CREATE INDEX DrivePass
ON Student (DrivePass)
CREATE INDEX NearestCityOrTown
ON Sudent (NearestCityOrTown)
I am trying to run the following:
select * from sysindexes
The operation begins and results are produced but after about 200 results, I get the error - Msg 0, Level 11, State 0, Line 0 - and it disconnects.
This is a DB moved (restored) from SQL 2000 to SQL 2005.
Any ideas would be appreciated. I am the "make do" DBA and not very good at it yet, I am afraid.
Regards,
Mike
Hi chaps,
I have the following SQL query (SQL 2005).
Its basically retrieving some values using simple joins.
However there appears to be a problem with the LEFT OUTER JOIN:
"LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID)
"
When I try to compile the code i Get :
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "OrderLineItemTransaction.OrderLineItemTransactionI D" could not be bound.
Any help would be appreciated.
Cheers
Bal
SELECT
ord.orderDate,
cc.forename + ' ' + cc.surname person,
prod.description,
oli.noofitems,
deladdr.housenameno + ' ' + deladdr.addressLine1 + ' ' + deladdr.addressLine2 + ' ' + deladdr.city + ' ' + deladdr.postcode + ' ' + deladdr.county + ' ' + deladdr.country deladdress
FROM
product prod,
OrderLineItem oli,
[Order] ord,
OrderTransaction ordT,
OrderLineItemTransaction oliT,
CustomerContact cc,
Customer cust,
DDDispatchedOrder dd,
address deladdr,
address invaddr
LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID)
WHERE
prod.productID = oli.productID:eek:
AND ord.orderID = oli.orderID
AND ord.orderID = ordT.orderID
AND oliT.orderlineitemID = oli.orderlineitemID
AND cc.customercontactID = ord.customercontactID
AND cc.customerID = cust.customerID
AND ord.invoiceaddressID = invaddr.addressID
AND ord.deliveryaddressID = deladdr.addressID
AND ordT.dispatchTypeID = 2
hi All,
Following code generates error 107 (SQL Server 2000, SP3a):
SELECT
*
FROM
dbo.AssessmentItemHierarchy Parent
INNER JOIN dbo.RaterCategory
INNER JOIN dbo.RaterType
ON RaterCategory.ID = RaterType.RaterCategoryID
INNER JOIN dbo.AssessmentRater
ON AssessmentRater.RaterTypeID = RaterType.ID
INNER JOIN dbo.AssessmentItem
ON AssessmentItem.ID = Parent.ChildItemID
INNER JOIN dbo.Assessment
ON AssessmentItem.AssessmentID = Assessment.ID
INNER JOIN dbo.AssessmentResponse
ON AssessmentResponse.AssessmentItemID = AssessmentItem.ID
ON AssessmentResponse.AssessmentRaterID = AssessmentRater.ID
INNER JOIN dbo.ImageInstance
ON ImageInstance.ID = RaterType.ImageInstanceID
INNER JOIN dbo.AssessmentItem ParentGUID
ON Parent.ParentItemID = ParentGUID.ID
Error on Run:
Msg 107, Level 16, State 2, Line 2
The column prefix 'Parent' does not match with a table name or alias name used in the query.
The only work-around I have found is a rewrite of order:
SELECT
*
FROM
AssessmentItemHierarchy Parent
INNER JOIN RaterCategory
INNER JOIN RaterType
INNER JOIN AssessmentRater
INNER JOIN AssessmentItem
INNER JOIN Assessment ON AssessmentItem.AssessmentID = Assessment.ID
INNER JOIN AssessmentResponse ON AssessmentItem.ID = AssessmentResponse.AssessmentItemID
ON AssessmentRater.ID = AssessmentResponse.AssessmentRaterID
ON RaterType.ID = AssessmentRater.RaterTypeID
ON RaterCategory.ID = RaterType.RaterCategoryID
INNER JOIN ImageInstance
ON RaterType.ImageInstanceID = ImageInstance.ID
ON Parent.ChildItemID = AssessmentItem.ID
INNER JOIN AssessmentItem ParentGUID ON Parent.ParentItemID = ParentGUID.ID
Not very pretty... anyone know why I'm getting this error message with the first version of my query?
I'm getting a specific error when i try to run a .sql script for a Custom TableProfileProvider ,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following error. It will produce the table but with "Errors" which dosn't do anyone any good to have errors in the table. I even used the Sql Server Surface Area Configuration to add a new Administrator with the name listed below (WYATT-PCWyatt), that didnt help either..Here is part of the Sample Scheme the problem lies in the [YOURMACHINENAMEASPNET]
Server = WYATT-PCSQLEXPRESS
Computer Name = Wyatt-PC
OS: Windows Vista Home Premium
===========================================================
use TableProfileProviders
go
--
--grants on ASP.NET stored procedures and tables used by the custom providers
--
grant EXECUTE on dbo.aspnet_Applications_CreateApplication to [YOURMACHINENAMEASPNET]
grant EXECUTE on dbo.aspnet_Users_CreateUser to [YOURMACHINENAMEASPNET]
grant SELECT on dbo.aspnet_Users to [YOURMACHINENAMEASPNET]
grant UPDATE on dbo.aspnet_Users(LastActivityDate) to [YOURMACHINENAMEASPNET]
go
--drop table dbo.ProfileTable_1
--go
create table dbo.ProfileTable_1 (
UserId uniqueidentifier not null Primary Key,
FirstName nvarchar(50) null,
LastName nvarchar(50) null,
Age int null,
LastUpdatedDate datetime not null)
go
grant SELECT,INSERT,UPDATE,DELETE on dbo.ProfileTable_1 to [YOURMACHINENAMEASPNET]
go
================================================================================
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
How can i fix this??
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
I created a function called Temperature in VB to be used as a UDF in SQL2005. I get the error listed below. Any thoughts?
CREATE FUNCTION Temperature(@FluidName SQL_variant, @InpCode SQL_variant, @Units SQL_variant, @Prop1 SQL_variant, @Prop2 SQL_variant)
RETURNS Float
AS EXTERNAL NAME Fluids_VB6.[Fluids_VB6.FluidProperties.Fluids].Temperature
Then ran function:
select dbo.temperature('R22','t','e','225.6','0')
Got this:
Msg 6522, Level 16, State 2, Line 1
A .NET Framework error occurred during execution of user defined routine or aggregate 'Temperature':
System.InvalidCastException: Conversion from type 'SqlBoolean' to type 'Boolean' is not valid.
System.InvalidCastException:
at Microsoft.VisualBasic.CompilerServices.Conversions.ToBoolean(Object Value)
at Fluids_VB6.FluidProperties.Fluids.Setup(Object& FluidName)
at Fluids_VB6.FluidProperties.Fluids.CalcSetup(Object& FluidName, Object& InpCode, Object& Units, Object& Prop1, Object& Prop2)
at Fluids_VB6.FluidProperties.Fluids.CalcProp(Object& FluidName, Object& InpCode, Object& Units, Object& Prop1, Object& Prop2)
at Fluids_VB6.FluidProperties.Fluids.Temperature(Object FluidName, Object InpCode, Object Units, Object Prop1, Object Prop2)
Thanks
Buck
Server: Msg 229, Level 14, State 5, Procedure sp_monitor, Line 167
EXECUTE permission denied on object 'sp_monitor', database 'master', owner 'dbo'.
How do I fix this? which roles, or permission is that? Is there a
easier way to find out solutions for these problems, as books online
does not seem to provide much help.
Thanks,
Vijay
IN THE SQL SERVER 2000 AND IN ALSO IN 2005 WHEN GOING FOR THE LOGGING IN TO THE SQL SERVER USING A PUBLIC IP, AND GIVING THE SQL SERVER AUTENTICATION IT IS GIVING THE FOLLOWING ERROR
Server: Msg 11, Level 16, State 1[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]General network error. Check your network documentation.
THE SAME ISSUE HAPPENING WITH THE ODBC CONNECTION. CAN ANYONE EXPLAIN ME WITH THE FOLLOWING ERROR
DO NOT GIVE A SUGGESTION OF REINSTALLATION, BECAUSE TRIED THAT ONE TOO
REGARDS
CHAITANYA BABU YANAMADALA