I have a need to create a table detailing the ID of all contacts and the
last time they were contacted. This information is stored in 2 tables,
'contact' and 'activity' (ID in the 'contact' table links to 'main_contact'
in the 'activity' table).
I guess I need some sort if iteration to go through each contact and find
find the last activity that took place against each of them (there many be
more than 1 activity against each contact) and then place the output values
into the new table.
Hi, Table A member_no - character 5course1 - character 1course2 - character 1 Table Bcourse_no - character 1course_name - character 20I'd like a resultant view that contains A.member_no, A.course1, B.coursename as COURSE1NAME, A.course2, B.course_name as COURSE2NAMEI know how to make the join and pick up the name for course1 but I DON'T know how to pick up both names of course 1 and course 2 at the same time.I'm thinking I have to make a join on one column and then join the result of that a second time to pick up the other column's value? Thanks in advance for any assistance,Stewart
Hi, I am trying to do a simple select statement which returns data from the table. The criteria is only if the count of the records is more than 10. Say, if a vendor called test exists 10 times in the table, I would like to display that vendor only, if less than 10, then that vendor won't be displayed at all. Here is what I have started.
Select vendor_id, vendor_name, Invoice_Date, Invoice_Number from Vendors where Invoice_Date Between '01/01/2007' And '03/03/2008' Group By vendor_id, vendor_name, Invoice_Date, Invoice_Number Having Count(Invoice_Number) > 10 This doesn't seem to work. What am I doing wrong here?
I have worked on developing a project that I am pleased to say is comming along nicely considering I have only been doing programming for a few weeks but I am now stuck and may be going down the wrong path.
I have two tables one that is used for logging via username and password, it also holds a third coloumn realting to the suers account that they do not enter. Once they have logged in I am recalling the users identity and running a query to establish what account the user belongs to. Later on in the script I am trying to run a query on a table called orders that list all orders belonging to that account that was established in the earlier query labelled as 'accountrequesting'. The script I have below returns all orders for all accounts even though I have tried a wide variety of endings on the Sql search on the orders table.
The code may look a little untidy and to advanced programmers may look rough but I am still learning.....please can anyone help.
sub Page_Load(sender as Object, e as EventArgs)
'collecting the user identity Dim user as string user=request("User.Identity.Name")
'running a query to establish what account they have access to all from users table Dim accountrequesting as string accountrequesting = "select account_id from users where username = " & user & "'"
'opening the data source and connection Dim ConnectionString As String = "Data Source=xxxx;Database=xxxx;User ID=xxxxxxx;Password=xxxxxxx" Dim Myconn as New SQLConnection(connectionstring)
'this is the line I am stuck on, the account id in this orders table needs to match against the value gained in accountrequesting above tried a lot of different endings
Dim MySQL as string ="select prodshipped, account_id from orders"
I have a table consisting of two fields, OStype and OSversion, withentries like:OStypeOSversionsolaris 2.5solaris 2.6redhat 6.2redhat 6.2solaris 8redhat AS4solaris 10solaris 10redhat AS2.1redhat AS3redhat AS4I want to create a select statement that returns for each OS type, thetotal number of entries and for each version the total number ofentries.In the example the result would be:OStype OStype Count OSversion OSversion Countsolaris 52.5 12.6 18 110 2redhat 66.2 2AS2.1 1AS3 1AS4 2Thanks in advance for your help.Ian
Now each table holds different measures e.g. 326, 229 & 278. I would like to subtract the measure_value of 229 from 278 and then add the measure_value from 278 from this. e.g
(326-229) + 278 = new measure_value.
This is for each id-product where the following 3 conditions meet:
the ID_PRODUCT, ID_MARKET AND ID_BUCKET match. Im lost, any help would be great.
thanks
Jay
p.s this what i have started with at the moment as a test however it dont work.
SELECT ID_PRODUCT, ID_MARKET, ID_BUCKET, ID_COLLECTION, ID_MEASURE, MEASURE_VALUE FROM (SELECT TOP 100 PERCENT dbo.DPOUT_EXCEPTIONS_326.ID_PRODUCT, dbo.DPOUT_EXCEPTIONS_326.ID_MARKET, dbo.DPOUT_EXCEPTIONS_326.ID_BUCKET, dbo.DPOUT_EXCEPTIONS_326.ID_COLLECTION, dbo.DPOUT_EXCEPTIONS_326.ID_MEASURE, dbo.DPOUT_EXCEPTIONS_326.MEASURE_VALUE + DBO.DPOUT_LSBP_229.MEASURE_VALUE as 'MEASURE_VALUE' FROM dbo.DPOUT_EXCEPTIONS_326 INNER JOIN dbo.dpout_lsbp_229 on dbo.dpout_exceptions_326.id_product = dbo.dpout_lsbp_229.id_product where dbo.DPOUT_EXCEPTIONS_326.ID_PRODUCT = dbo.dpout_lsbp_229.id_product and dbo.DPOUT_EXCEPTIONS_326.ID_MARKET = DBO.DPOUT_LSBP_229.ID_MARKET and dbo.DPOUT_EXCEPTIONS_326.ID_BUCKET = DBO.DPOUT_LSBP_229.ID_BUCKET)
I have a C# application that calls a stored procedure to query the database (MSSQL 2005). I only have one field/column returned from the query but I need that column ordered.
How do I use the ORDER BY clause without returning the index column which does the sorting? The first example is NOT what I want. I want something that works like the second example which only returns the 'Name' column.
ALTER PROCEDURE [dbo].[MyProcedure]
AS
BEGIN
SELECT DISTINCT A.Name, A.index
FROM ... ... ORDER BY A.[Index], A.Name ASC
END
ALTER PROCEDURE [dbo].[MyProcedure]
AS
BEGIN
SELECT DISTINCT A.Name FROM ... ... ORDER BY A.[Index]
Hello,I am attempting to build a MS SQL query that will return data from"today"; today being current day 8:00AM-10:00PM today. My goal is toreturn the data from a table that is written to throughout the day, thequery will provide the current grade of service in our call center.I am having difficulty defining my where clause:- I can accomplish my goal my statically defining my 'date between' asthe actual date and time (not ideal)- I can accomplish the second part of my date using CURRENT_TIMESTAMP;but I am unable to define the starting pointHere is where I am thus far:/* We are going to count the total calls into each queue from start ofbusiness today (8:00AM) to now */select COUNT(Result) as "Total Sales Calls Offered" fromdbo.QueueEncounterwhere Direction='0'andQueueID='1631'and/* This is where I get lost */Time between DATEPART(day, GETDATE()) and DATEPART(day, GETDATE())Clearly the last line returns zero as there are no calls between thesame date range. How can I add to that line, or write this to work?Any thoughts?Thanks for the help.-Chris
I have four total tables.Table One (Documents)- List of Documents. Each record has two fieldsrelated to this issue. First field (Document_ID) is the ID of thedocument, second field is the ID of the record (Task_ID) it isassociated to in Table Two.Table Two (Activities)- List of activities. Each record has two fieldsrelated to this issue. First field (Activity_ID) is the ID of theactivity, the second field (Group_ID) is the ID of the record it isassociated to in Table Three.Table Three (Groups) - List of groups. Each record has two fieldsrelated to this issue. First field (Group_ID) is the ID of the group,the second field (Stage_ID) is the ID of the record it is associated toin Table four.Table Four (Stages)- List of Event Stages. Each record has two fieldsthat is related to this issue. The first field (Stage_ID) is the ID ofthe stage of an event, the second record is the ID number associated tothe event. This last ID is a known value.20000024 = the Event IDI'm trying to come up with a list of Documents from the first tablethat is associated to an Event in the Fourth table.Query Analyzer shows no errors within the script. It just doesn'treturn any data. I know that it should, if it does what I'm wanting itto do.SELECT Document_ID FROM Documents as A where ((SELECT Event_ID FROMStages as D WHERE (D.Stage_ID = (SELECT Stage_ID FROM Groups as C WHERE(C.Group_ID = (SELECT Group_ID FROM Activity as B WHERE (B.Activity_ID= A.Activity_ID))))))= '20000024')
Need help in writing a query. I have a table contains details about an item. Each item belongs to a group. Items have different status. If any one of the item in a group is not "Completed", then the itemgroup is in state incomplete. if all the item under the group is completed then the item group itself is completed. Now I need to create a view with itemgroup and itemstatus. Suppose I have five records
I know the method where you select each and every table and manually create foreign key relationships to other tables in the database visually or by sql. Is there any way in SQL server 2005, to create these relationships using wizard, where it checks for the same column names in different tables and creates the relationships. If yes, please let me know how to do it in SQL server 2005.
I am using a poker application that imports all played hands into a PostgreSQL database. I'm trying to write some queries for that database so I can make good use of the data. I figure PostgreSQL and SQL server probably have similar language. And I know these forums are great. So I'm posting here for help.
This is a working code snippet that retreives three properties of a player:
Code Snippet
SELECT sum(totalhands) AS HANDS, sum(vpiphands) AS VPIPHANDS, sum(pfrhands) AS PFRHANDS FROM compiledplayerresults WHERE compiledplayerresults_id in ( SELECT compiledplayerresults_id FROM compiledresults WHERE play SELECT player_id FROM players WHERE playername='PLAYERNAME')); This is all I can do with my skills right now. However I very much want to learn to query for more things: - I'd like to be able to make a query for several players at the same time - I'd like to be able to get the aggregate properties for all players who are not PLAYERNAME1 or PLAYERNAME2 - I'd like to be able to get the aggregate vpiphands property from all players whose totalhandsis > 100 and < 1000.
I hope you can help me with that. If you can, that will make me very happy and grateful! Thanks!
Can someone please help me....I have created a DNN module that works on the test site but when I upload the module zip to a new site I get an error on creating my stored proceedure as follows:
Failure SQL Execution resulted in following Exceptions: System.Data.SqlClient.SqlException: Line 25: Incorrect syntax near '@Str_Title'. Line 51: Incorrect syntax near '@Str_Title'. at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters) at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters) at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText) at DotNetNuke.Data.SqlDataProvider.ExecuteScript(String Script, Boolean UseTransactions) CREATE PROCEDURE dbo. ListTAS_Journal @PortalID int, @SortOrder tinyint = NULL, @Str_Title varchar(100) = '', @Str_Text varchar(100) = '' AS IF ISNULL(@Str_Title, '') = '' or ISNULL(@Str_Text, '') = '' SELECT [EntryID], [PortalID], [ModuleID], [Title], [Text], [DateAdded], [DateMod], [Owner], [Access] FROM TAS_Journal WHERE PortalID = @PortalID AND (Title like COALESCE('%' @Str_Title '%' ,Title , '') AND Text like COALESCE('%' @Str_Text '%' ,Text, '')) ORDER BY (CASE WHEN @SortOrder = 1 THEN DateAdded WHEN @SortOrder = 0 THEN DateMod END) DESC, EntryID DESC else /***Select from either field ***/ SELECT [EntryID], [PortalID], [ModuleID], [Title], [Text], [DateAdded], [DateMod], [Owner], [Access] FROM TAS_Journal WHERE PortalID = @PortalID AND (Title like COALESCE('%' @Str_Title '%' ,Title , '') OR Text like COALESCE('%' @Str_Text '%' ,Text, '')) ORDER BY (CASE WHEN @SortOrder = 1 THEN DateAdded WHEN @SortOrder = 0 THEN DateMod END) DESC, EntryID DESC
EndJob End Sql execution: 01.00.00.SqlDataProvider file
The SP looks like this:
/* ------------------------------------------------------------------------------------- / ListTAS_Journal / ------------------------------------------------------------------------------------- */ SET QUOTED_IDENTIFIER ON GO SET ANSI_NULLS OFF GO
IF ISNULL(@Str_Title, '') = '' or ISNULL(@Str_Text, '') = ''
SELECT [EntryID], [PortalID], [ModuleID], [Title], [Text], [DateAdded], [DateMod], [Owner], [Access] FROM TAS_Journal WHERE PortalID = @PortalID AND (Title like COALESCE('%' + @Str_Title + '%' ,Title , '') AND Text like COALESCE('%' + @Str_Text + '%' ,Text, ''))
ORDER BY (CASE WHEN @SortOrder = 1 THEN DateAdded WHEN @SortOrder = 0 THEN DateMod END) DESC, EntryID DESC else /***Select from either field ***/ SELECT [EntryID], [PortalID], [ModuleID], [Title], [Text], [DateAdded], [DateMod], [Owner], [Access] FROM TAS_Journal WHERE PortalID = @PortalID AND (Title like COALESCE('%' + @Str_Title + '%' ,Title , '') OR Text like COALESCE('%' + @Str_Text + '%' ,Text, ''))
ORDER BY (CASE WHEN @SortOrder = 1 THEN DateAdded WHEN @SortOrder = 0 THEN DateMod END) DESC, EntryID DESC GO
SET QUOTED_IDENTIFIER OFF GO SET ANSI_NULLS ON GO
This SP works on the test site. Any help would be creatly apreciated
Hi I am currently trying to write a custom transform componet in c# that will take a row of data, perform a look-up via an external system, then if there is a match then send the data from the extranel system down macth ouptut (which will have different columns to the input) and drop the data that was read, else send the data down the unmacthed output which will be the same as the input.
So I would like to write a synchrons transform becuase I don't need read all the rows from the input buffer before I started processing, also I wish have millions of rows load in memory.
Can this be done? also does any have explame code of how to do this? becuse I can't see how to send data down the match output buffer, as this will have the lookup results data which will have diffent columns to the input data and how disgard the input data as well.
Details : Reporting Services 2000, SQL 2000 database, Visual Studio . Net 2003
In Report Design view
In "Data" tab, I can see records for column 'sRCName' returned from the stored procedure(usp_GetRouteCodeData) after clicking '!' icon. When I moved to "Preview" tab, I am getting below error message. "The value expression for the textbox €˜sRCName€™ refers to the field €˜sRCName€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope."
Observation : there is no value returned from the dataset on 'Fields' panel. The SP is accessing a table called tblRCM. If I go to the Data--> Dataset --> Query, change the "Command Type" from 'Stored Procedure' to 'Text' and entered select * from tblRCM at Query string area, the report is running fine.
Issue: This issue only happens at my laptop, my team member can create the same report using the same stored procedure without any error. The database is sitting on a server.
In the troubleshooting process, I tried to create a simple report by calling a stored procedure(CustOrderHist) from NorthWind DB in my local SQL server, I am able to see the data/value in 'Fields' panel and sucessfully view the data in 'Preview' tab. Looks like the issue only happen on my machine, for a report that using stored procedure to access a DB sitting on a server.
I hope to hear from anyone who have encountered the similiar issue before, or, have any clue to resolve the issue.
Hi.. I need help with this SQL statement. I don't know if this can be done with a single SQL statement or not! I have two tables:
tblProducts: ProductID, ProductName tblOrders: OrderID, ProductID I need to "SELECT tblProducts.ProductName FROM tblProducts WHERE (tblProducts.ProductID is not in tblOrders Table)". Thanks in advance...
Hi, In my database i have a column Called EntryDates which has 'Jan1' etc.. stored in it. and i am getting an Xml object and in the object i am getting @EntryDAtesMatch and @EntryDatesPS and they have different months stored in it. So i want to insert into Entrydates or set the Entrydates as to whats been passed in following scenarios If @Entrydates is Not Null then i want @EntryDates to be set as @EntryDates. Suppose @EntryDates is NULL But @EntryDatesMatch OR @entryDAtesPS are not null then i want @EntryDates to be = @EntryDatesMatch..
Suppose is @EntryDates @EntryDatesMatch and null i want @EntryDates to be set as @EntryDatesPS... This is what ihave tried doing.. but doesnt work as the way i want it..
SET @EntryDates = CASE --When @EntryDatesMatch = NULL Then @EntryDates When @EntryDates = NULL and @EntryDatesMatch = NULL Then @EntryDatesPS When @EntryDates = NULL and @EntryDatesPS = NULL then @EntryDatesMatch End Any help will be appreciated.. Regards, Karen
I am having a heck of a time getting an UPDATE statement to work. Can anyone point out what it is I'm doing wrong? Here is my statement...... strSQL = "UPDATE tbl-Pnumber_list SET Project_Title = 'success' WHERE ID = @IDParam" Thanks! Eugh
I have a stored procedure that populates a table. I want to query the table using column names as variables, however the data is in decimal format so I am getting errors converting varchar to numeric. My table consists of columns labeled D1, D2, etc. for every possible day of any month, DOW1, DOW2, etc. for every day of the week. I also have values labeled midDpct and midDOWpct. My query is as follows:
select * from Table where D10 > midDaypct * 2 and DOW6 > 0 union select * from Table where DOW6 >midDOWpct * 2 and D10 > 0
We are targeting a specific day of the month and a specific day of week, day 10 and day of week 6 in this example. I want to make these variables so we can easily change out the target day and dow.
I have a table with two columns. empnum and empname. there are some data with same empnum but different empname. I just want to get the first empname for the same empnum. Is there a way to write a sql stetment to do this?
I need to issue an update statement to the ChronicOther field. If the range below is in the AnyDx field, then I want the ChronicOther field to say "Chronic", if not then I want it to say "Other".
where AnyDx between '25000' and '25091'
or AnyDx between '41400' and '41406'
or AnyDx between '42800' and '42890'
or AnyDx between '40100' and '40291'
or AnyDx between '34200' and '34292'
or AnyDx between '14000' and '19910'
or AnyDx between '49600' and '49600'
or AnyDx between '27240' and '27240')
My problem is what is the best way to look for this range (below) in the AnyDx field without multiple like statements?
example: Update reports.MDC_DRG SET ChronicOther = CASE When AnyDx like ('%,25000,%') Then 'Chronic' Else 'Other' etc., etc.....
I'm trying to get my feet wet with creating a Sql Server project within VS 2005 and I have the using statements below present but when I compile I get errors stating that SqlContext, SQLPipe, and SQLCommand do not exist in the current context. What am I missing? Under the references node I have 3 references present (System, System.Data, and System.XML). What am I missing?
I am looking to modify this Case Statement. Where it says ELSE '' I need it to display the actual contents of the cell. 1 = Yes , 0 = No, (any other integer) = actual value. Right now if the value is anything other than 1 or 0, it will leave the cell blank. CASE dbo.Training.TrainingStatus WHEN 1 THEN 'Yes' WHEN 0 THEN 'No' ELSE '' END AS TrainingStatus Thank You.
Hi, I am trying to insert the Source name and clientId to a table called clientSource...
The User will send in some Dbf File.... So in a particular file called PlanDbf.. I have the following fields PlanNumber, Name, SRC1Name, SRC2Name, SRC3Name.... SRC20Name 170234 Constructions Employee Deferral Employer Discretionary Employer Matching....
And in another table called SourceDBF i have the following fields with data PlanNumber PARTID SOURCE_NUM etc... 170234 123456789 1 170234 123456789 3 170234 451231334 1 So how do i match the Source_NUM with SRCnames when i insert it into the table.. INSERT INTO Statement..ClientSource(@ClientId, SourceName)SELECT s.SOURCE_NUM FROM SourceDBF .. but i am stuck.. any help will be appreciated. Regards Karen
In my Database, I do not have a [Last Visit Date]. I have had to pull it by doing the following:
(select top 1 visit from patientvisit pv where visit >= ISNULL(NULL,'1/1/1900') and visit < dateadd(d, 1,ISNULL(NULL,'1/1/3000')) AND pp.patientprofileid = pv.PatientProfileID and datediff(day, getDate(), visit) < 0 order by visit desc) as [Last Visit Date]
My client would like to have a listing of patients with a visit within the past 2 years and without a visit in the past 2 years. What I would like to do is have a case statement that evaluates like:
Case When dateadd(y,[LastVisitDate],getdate())<2 then 'Less Than 2' When dateadd(y,[LastVisitDate],getdate())>=2 then '2 or more' else 'No detected visit' END
So basically, either your in 2 yrs or your not.
My Current Query:
/* Patient List*/ SET NOCOUNT ON
DECLARE @Zip varchar(40) SELECT @Zip = LTRIM(RTRIM('NULL')) + '%'; WITH cteMedlitsPatientStatus AS ( SELECT * FROM Medlists WHERE TableName = 'PatientProfileStatus' )
SELECT PatientID, RespSameAsPatient=isnull(PatientSameAsGuarantor,0), PatientName=CASE WHEN RTRIM(pp.Last + ' ' + ISNULL(pp.Suffix,'')) <> '' THEN RTRIM(RTRIM(pp.Last + ' ' + ISNULL(pp.Suffix,'')) + ', ' + ISNULL(pp.First,'') + ' ' + ISNULL(pp.Middle,'')) ELSE RTRIM(ISNULL(pp.First,'') + ' ' + ISNULL(pp.Middle,'')) END, PatientAddr1=pp.Address1, PatientAddr2=pp.Address2, PatientCity=pp.City, PatientState=pp.State, PatientZip=pp.Zip, PatientRespName=CASE WHEN RTRIM(pr.Last + ' ' + ISNULL(pr.Suffix,'')) <> '' THEN RTRIM(RTRIM(pr.Last + ' ' + ISNULL(pr.Suffix,'')) + ', ' + ISNULL(pr.First,'') + ' ' + ISNULL(pr.Middle,'')) ELSE RTRIM(ISNULL(pr.First,'') + ' ' + ISNULL(pr.Middle,'')) END, PatientRespAddr1=pr.Address1, PatientRespAddr2=pr.Address2, PatientRespCity=pr.City, PatientRespState=pr.State, PatientRespZip=pr.Zip, FinancialClass=isnull(ml.Description,'none'), Doctor=df.ListName,Facility=df1.OrgName,Balance=isnull(ppa.PatBalance,0)+isnull(ppa.InsBalance,0), pp.DeathDate, Status = ml1.Description, pp.BirthDate, (select top 1 visit from patientvisit pv where visit >= ISNULL(NULL,'1/1/1900') and visit < dateadd(d, 1,ISNULL(NULL,'1/1/3000')) AND pp.patientprofileid = pv.PatientProfileID and datediff(day, getDate(), visit) < 0 order by visit desc) as [Last Visit Date]
FROM PatientProfile pp LEFT JOIN PatientProfileAgg ppa ON pp.PatientProfileID = ppa.PatientProfileID LEFT JOIN Guarantor pr ON pp.GuarantorID = pr.GuarantorID LEFT JOIN MedLists ml ON pp.FinancialClassMID = ml.MedListsID LEFT JOIN DoctorFacility df ON pp.DoctorID = df.DoctorFacilityID LEFT JOIN DoctorFacility df1 ON pp.FacilityId = df1.DoctorFacilityID LEFT JOIN cteMedlitsPatientStatus ml1 ON pp.PatientStatusMId = ml1.MedlistsId
I have a case statement that provides filtering of hours during certain days of the week. An example is the data I want to show on Sunday is different from the rest of the week. I am using....
Code Snippet
WHERE ((CASE WHEN Datepart(dw, TestDateTime) = 1 AND datepart(hh, TestDateTime) BETWEEN 8 AND 22 THEN 1 WHEN Datepart(dw, TestDateTime) >= 2 AND datepart(hh, TestDateTime) BETWEEN 6 AND 23 OR datepart(hh, TestDateTime) BETWEEN 0 AND 2 THEN 1 ELSE 0 END) >= @ShowCore)
Esentially it gives a parameter (@showcore) to where it shows the filtered hours when 1 is selected, and all hours if 0 is selected.
Basically, Sunday I want to show transaction from between 8am and 10pm, All other days would be 12am - 2am and 6am to 11:59:59 when selecting 1 as the parameter.
I would like to create a database for keeping track of payroll data for employees where the supervisors (job coaches) on our workshop floor can use a Pocket PC device to record the hourly employee data on the fly. Then at the end of the day, the supervisor can place the device in a cradle of some sort and synch the newly entered data into the main database.
I'm guessing that SQL Server Compact edition would be perfect for this type of task? Is that correct? Can someone give me recommendations on how to go about setting this up? What should I use as the main database? SQL Server? Access? Any advice is appreciated!
