Help Needed With This Error Message While Running A DTS Package
Sep 7, 2007
Hi
I am trying to import a excel file into a table but when i run it i am getting this error and i am not sure what this eror is
- Copying to [ICCStatements].[dbo].[Sheet1$] (Error)
Messages
Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task: There was an error with input column "AdminShowInKit" (148) on input "Destination Input" (102). The column status returned was: "The value violated the integrity constraints for the column.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (102)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (102)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Sheet1$" (89) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Any help will be appreciated..
Regards
KAren
View 1 Replies
ADVERTISEMENT
Jan 30, 2007
Hello,
I'm having problems when I try to run a package from a job in SQL Server Agent. I have the same package in a server and it works fine,but when I try to install it in a different server I keep getting this error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 01:19:10 p.m.
Progress: 2007-01-30 13:19:10.40
Source: Delete scripts Execute Process Task
Operation Complete: 0% complete
End Progress
Error: 2007-01-30 13:19:10.57
Code: 0xC0029151
Source: Delete scripts Execute Process Task
Description: In Executing "C:Project_SSISDelete_Items.bat" "" at "", The process exit code was "1" while the expected was "0".
End Error
Progress: 2007-01-30 13:19:10.57
Source: Delete scripts Execute Process Task
Operation Complete: 100% complete
End Progress
Warning: 2007-01-30 13:19:10.57
Code: 0x80019002
Source: Upload data
Description: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 01:19:10 p.m.
Finished: 01:19:10 p.m.
Elapsed: 0.5 seconds
I can run it from Integration services Server, from BI, and I tried modifying the ProtectionLevel property to DontSaveSensitive and ServerStorage. I have other packages that run in jobs, and they work fine...but i donīt know what else to do....By the way, I'm using an administrator user to run the package.
Please help! =(
View 4 Replies
View Related
Apr 23, 2007
Hello:
I have a SSIS Project thats been running fine for months up until yesterday.
There's a master package that calls other packages, and when i run it now in Visual Studio, i get a Message Box after each of it's child packages run. The message states:
TITLE: Microsoft Visual Studio------------------------------The designer window cannot be closed while a package is running.Stop the debugger before attempting to close the window.------------------------------BUTTONS:OK------------------------------
This seems to be causing issues, because VS seems to hang on my machine at some point when running master packages, and i think it might due to a message box.
Anyone know how I can get rid of this?
View 2 Replies
View Related
Dec 6, 2004
I have been putzing with this error message for a couple of hours now, and I cannot seem to get it to go away. Any ideas on how to fix it? I have verified that the user name, password, and server location is all correct.
System.Data.SqlClient.SqlException: Login failed for user 'xxxxxx'. Reason: Not associated with a trusted SQL Server connection. at System.Data.ProviderBase.DbConnectionPool.GetConnection(Object owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnectionBase owningConnection) at System.Data.ProviderBase.DbConnectionClosed.Open(DbConnectionBase outerConnection) at System.Data.ProviderBase.DbConnectionBase.Open() at System.Data.SqlClient.SqlConnection.Open() at xxxxx.selection.FillDGResults() in c:inetpubwwwrootxxxxxxxxxx.aspx.vb:line 74
Thanks!
Dan
View 4 Replies
View Related
Oct 25, 2007
Hi i am trying to transfer the contents of a dbf file to sql server 2005 and this is my error message
'C:Documents and SettingsKarenMy DocumentsVisual Studio 2005WebSitesASC1pdfclientAS.DBF' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
This is my code
If (FlAS.PostedFile.FileName.ToLower.EndsWith(".dbf")) Then
FlAS.PostedFile.SaveAs(location)
Try
'Connection string to a dbase file
Dim dbfConnectionString As String = String.Format("Provider=Microsoft.Jet.OLEDB.4.0;Data Source ={0};Extended Properties= dBase IV", location)
'create connection to the DBF file
Using connection As Data.OleDb.OleDbConnection = New Data.OleDb.OleDbConnection(dbfConnectionString)
Dim command As Data.OleDb.OleDbCommand = New Data.OleDb.OleDbCommand("Select * from AS.DBF", connection)
connection.Open()
'Create a dbDatareader to the dbf file
Using dr As Data.Common.DbDataReader = command.ExecuteReader()
Dim sqlConnectionString As String = System.Configuration.ConfigurationManager.AppSettings(APPSETTINGS_CONNECTION)
Dim myConnection As New SqlConnection(System.Configuration.ConfigurationManager.AppSettings(APPSETTINGS_CONNECTION))
Dim query As String = "Truncate table ASDBF"
myConnection.Open()
Dim cmd As New SqlCommand(query, myConnection)
cmd.CommandType = CommandType.Text
cmd.ExecuteScalar()
myConnection.Close()
'bulk copy of sql server
Using BulkCopy As SqlBulkCopy = New SqlBulkCopy(sqlConnectionString)
BulkCopy.DestinationTableName = "ASDBF"
BulkCopy.WriteToServer(dr)
End Using
End Using
connection.Close()
End Using
Catch ex As Exception
Throw ex
End Try
End If
Any help will be appreciated.
Regards
Karen
View 12 Replies
View Related
Dec 1, 2006
Hello,
I have a DTS package that will run and execute with no problem when you start it. But when I schedule the dts package. The dynamic properties task fails with the following message.
Executed as user: CSEDBSTST001sqljobmgr. DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSDynamicPropertiesTask_1 DTSRun OnError: DTSStep_DTSDynamicPropertiesTask_1, Error = -2147220492 (800403F4) Error string: Could not open file for reading. Error source: Dynamic Properties Task Help file: Help context: 0 Error Detail Records: Error: 0 (0); Provider Error: 0 (0) Error string: Could not open file for reading. Error source: Dynamic Properties Task Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDynamicPropertiesTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
The task reads an .ini file to setup up many properties throughout the DTS package.
Does anyone have an idea about this?
Thanks
View 1 Replies
View Related
Jan 20, 2007
Hi, I'm trying to do insert some data to the database through typing the a number in a textbox. But i will get this error message whenever i tried putting a number that will be inserted to the database.
Sorry that the codes are quite messy. Please do let me know which part of the coding contains the errors.
Please help me. Thanks.
Server Error in '/WSD Project - Cam-Mart' Application.
String or binary data would be truncated.The statement has been terminated. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: String or binary data would be truncated.The statement has been terminated.Source Error:
Line 26:
Line 27: Protected Sub add_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles add.Click
Line 28: SqlDataSource2.Insert()
Line 29: Response.Redirect("Checkout.aspx")
Line 30: Source File: C:Documents and SettingsAdministratorDesktopWSD Project - Cam-MartOrder.aspx.vb Line: 28 Stack Trace:
[SqlException (0x80131904): String or binary data would be truncated.
The statement has been terminated.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +177
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +68
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2300
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +147
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +413
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +115
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +392
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +405
System.Web.UI.WebControls.SqlDataSource.Insert() +13
Order.add_Click(Object sender, EventArgs e) in C:Documents and SettingsAdministratorDesktopWSD Project - Cam-MartOrder.aspx.vb:28
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4921
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
The codes that i have is in Order.aspx:
<%@ Page Language="VB" MasterPageFile="~/MainMasterPage.master" AutoEventWireup="false" CodeFile="Order.aspx.vb" Inherits="Order" title="Cam-Mart - Your Cart" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:TextBox ID="ProductID" runat="server" Visible="False"></asp:TextBox>
<asp:TextBox ID="ProductPrice" runat="server" Visible="False"></asp:TextBox><br />
<span style="font-family: Verdana; color: lightsteelblue;">Product Name: </span>
<asp:Label ID="prodName" runat="server" Text="Label" ForeColor="Black"></asp:Label><br />
<span style="font-family: Verdana; color: lightsteelblue;">Product Price: </span><asp:Label ID="price"
runat="server" Text="Label" ForeColor="Black"></asp:Label><br />
<span style="font-family: Verdana"><span style="color: lightsteelblue">Quantity:</span>
</span><asp:TextBox ID="tbQuantity" runat="server" AutoPostBack="True"></asp:TextBox>
<asp:Label ID="lblqty" runat="server" Text="Label"></asp:Label><br />
<asp:TextBox ID="ProductName" runat="server" Visible="False"></asp:TextBox><br />
<br />
<asp:Label ID="Label1" runat="server" Text="Label" Visible="False"></asp:Label><br />
<span style="color: lightsteelblue; font-family: Verdana">Your Order Date is: </span>
<asp:Label ID="lblOrderDate" runat="server"></asp:Label><br />
<span style="color: lightsteelblue; font-family: Verdana">Your Delivery Date will be:</span>
<asp:Label ID="lblDeliveryDate" runat="server"></asp:Label><br />
<asp:TextBox ID="dtorderdate" runat="server" Visible="False"></asp:TextBox>
<br />
<asp:TextBox ID="dtdeliverydate" runat="server" Visible="False"></asp:TextBox><br />
<br />
<asp:Button ID="add" runat="server" Text="Add to Cart" /><br />
<asp:Button ID="Back" runat="server" Text="Back" /><br />
<asp:Button ID="checkout" runat="server" Text="Checkout" /><br />
<asp:FormView ID="FormView1" runat="server" DataKeyNames="CustID" DataSourceID="SqlDataSource1">
<EditItemTemplate>
CustID:
<asp:Label ID="CustIDLabel1" runat="server" Text='<%# Eval("CustID") %>'></asp:Label><br />
<asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True" CommandName="Update"
Text="Update">
</asp:LinkButton>
<asp:LinkButton ID="UpdateCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"
Text="Cancel">
</asp:LinkButton>
</EditItemTemplate>
<InsertItemTemplate>
<asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"
Text="Insert">
</asp:LinkButton>
<asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"
Text="Cancel">
</asp:LinkButton>
</InsertItemTemplate>
<ItemTemplate>
CustID:
<asp:Label ID="CustIDLabel" runat="server" Text='<%# Eval("CustID") %>'></asp:Label><br />
</ItemTemplate>
</asp:FormView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:List Product %>"
SelectCommand="SELECT [CustID] FROM [CustInfo] WHERE ([CustName] = @CustName)">
<SelectParameters>
<asp:ControlParameter ControlID="Label1" Name="CustName" PropertyName="Text" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConflictDetection="CompareAllValues"
ConnectionString="<%$ ConnectionStrings:List Product %>" DeleteCommand="DELETE FROM [OrderDetail] WHERE [OrderID] = @original_OrderID AND [CustID] = @original_CustID AND [CustName] = @original_CustName AND [OrderDate] = @original_OrderDate AND [TotalValue] = @original_TotalValue AND [Quantity] = @original_Quantity AND [DeliveryDate] = @original_DeliveryDate AND [ProductID] = @original_ProductID AND [ProductName] = @original_ProductName"
InsertCommand="INSERT INTO [OrderDetail] ([CustID], [CustName], [OrderDate], [TotalValue], [Quantity], [DeliveryDate], [ProductID], [ProductName]) VALUES (@CustID, @CustName, @OrderDate, @TotalValue, @Quantity, @DeliveryDate, @ProductID, @ProductName)"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT * FROM [OrderDetail] WHERE ([CustID] = @CustID)"
UpdateCommand="UPDATE [OrderDetail] SET [CustID] = @CustID, [CustName] = @CustName, [OrderDate] = @OrderDate, [TotalValue] = @TotalValue, [Quantity] = @Quantity, [DeliveryDate] = @DeliveryDate, [ProductID] = @ProductID, [ProductName] = @ProductName WHERE [OrderID] = @original_OrderID AND [CustID] = @original_CustID AND [CustName] = @original_CustName AND [OrderDate] = @original_OrderDate AND [TotalValue] = @original_TotalValue AND [Quantity] = @original_Quantity AND [DeliveryDate] = @original_DeliveryDate AND [ProductID] = @original_ProductID AND [ProductName] = @original_ProductName">
<DeleteParameters>
<asp:Parameter Name="original_OrderID" Type="Int32" />
<asp:Parameter Name="original_CustID" Type="Int32" />
<asp:Parameter Name="original_CustName" Type="String" />
<asp:Parameter Name="original_OrderDate" Type="DateTime" />
<asp:Parameter Name="original_TotalValue" Type="Decimal" />
<asp:Parameter Name="original_Quantity" Type="Int32" />
<asp:Parameter Name="original_DeliveryDate" Type="DateTime" />
<asp:Parameter Name="original_ProductID" Type="Int32" />
<asp:Parameter Name="original_ProductName" Type="String" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="CustID" Type="Int32" />
<asp:Parameter Name="CustName" Type="String" />
<asp:Parameter Name="OrderDate" Type="DateTime" />
<asp:Parameter Name="TotalValue" Type="Decimal" />
<asp:Parameter Name="Quantity" Type="Int32" />
<asp:Parameter Name="DeliveryDate" Type="DateTime" />
<asp:Parameter Name="ProductID" Type="Int32" />
<asp:Parameter Name="ProductName" Type="String" />
<asp:Parameter Name="original_OrderID" Type="Int32" />
<asp:Parameter Name="original_CustID" Type="Int32" />
<asp:Parameter Name="original_CustName" Type="String" />
<asp:Parameter Name="original_OrderDate" Type="DateTime" />
<asp:Parameter Name="original_TotalValue" Type="Decimal" />
<asp:Parameter Name="original_Quantity" Type="Int32" />
<asp:Parameter Name="original_DeliveryDate" Type="DateTime" />
<asp:Parameter Name="original_ProductID" Type="Int32" />
<asp:Parameter Name="original_ProductName" Type="String" />
</UpdateParameters>
<SelectParameters>
<asp:ControlParameter ControlID="FormView1" Name="CustID" PropertyName="SelectedValue"
Type="Int32" />
</SelectParameters>
<InsertParameters>
<asp:ControlParameter Name="CustID" Type="Int32" ControlID="FormView1"/>
<asp:ControlParameter Name="OrderDate" Type="DateTime" ControlID="dtorderdate"/>
<asp:ControlParameter Name="TotalValue" Type="Decimal" ControlID="price"/>
<asp:ControlParameter Name="Quantity" Type="Int32" ControlID="lblqty"/>
<asp:ControlParameter Name="DeliveryDate" Type="DateTime" ControlID="dtdeliverydate"/>
<asp:ControlParameter Name="ProductID" Type="Int32" ControlID="ProductID"/>
<asp:ControlParameter Name="ProductName" Type="String" ControlID="prodName"/>
<asp:ControlParameter Name="CustName" Type="String" ControlID="Label1"/>
</InsertParameters>
</asp:SqlDataSource>
</asp:Content>
The text in Order.aspx.vb is :
Partial Class Order
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Dim sUsername As String = " "
Session("Username") = Request.ServerVariables("Auth_user")
Label1.Text = Session("Username")
ProductID.Text = Request("ProductID")
ProductPrice.Text = Request("ProductPrice")
ProductName.Text = Request("ProductName")
lblqty.Text = tbQuantity.Text
prodName.Text = ProductName.Text
price.Text = ProductPrice.Text
dtorderdate.Text = DateTime.Today
dtdeliverydate.Text = DateAdd("d", 7, Date.Today)
lblOrderDate.Text = dtorderdate.Text
lblDeliveryDate.Text = dtdeliverydate.Text
'Dim dtorderdate, dtdeliverydate As DateTime
'lblOrderDate.Text = "Order date: " & dtorderdate.ToString
'lblDeliveryDate.Text = "Delivery date: " & dtdeliverydate.ToString
End Sub
Protected Sub add_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles add.Click
SqlDataSource2.Insert()
Response.Redirect("Checkout.aspx")
End Sub
Protected Sub Back_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Back.Click
Response.Redirect("Catalogs.aspx")
End Sub
Protected Sub checkout_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles checkout.Click
Response.Redirect("Checkout.aspx")
End Sub
End Class
View 2 Replies
View Related
Jan 30, 2007
hi,
I'm working on "MERGE REPLICATION"...i followed the procedure same as the book
"SQL SERVER CE DATABASE DEVELOPMENT WITH the .NET COMPACT FRAMEWORK"Author Rob Tiffany, ch9,10
i got one error msg that..."a request to send data to the computer funning IIS failed,for more information seeHRESULT " ..When my program hits rep.Syncronize()...
here my codes
\\\\\\\\\\\
rep = New SqlCeReplication
rep.InternetUrl= "https://seawolf/fieldagentrda/sscesa20.dll"
rep.InternetLogin = "robtiffany"
rep.InternetPassword = "pinnacle"
rep.Publisher = "seawolf"
rep.PublisherDatabase = "IntelligenceData"
rep.PublisherLogin = "sa"
rep.PublisherLogin = "apress"
rep.Publication = "IntelligenceDataPublication"
rep.Subscriber = "subscriber"
rep.SubscriberConnectionString="Datasource=My Documents" & _"IntelligenceData.sdf;" & _ "SSCE:Database Password=apress"
If File.Exists("MyDocumentsIntelligenceData.sdf") Then
rep.Synchronize()
Else
MessageBox.Show("You must first create a database", "Error")
End If
\\\\\\\\\\\\\\\\\\\
can anyone help me ,how to solve this issue?
Thanks in advance
View 2 Replies
View Related
Sep 10, 2007
For a client i have built an application to give them the possibility to load packages for their data warehouse.
This application starts a database job in SQL Server, which in turn starts a dtsx package. This package loops over the contents of a table and starts the packages that are marked to be executed.
This all work well most of the time. Sometimes though, DTExec, the process running the packages, just stops running. There are no entries in the event viewer or anywhere else.
I run Windows Server 2003 with SQL Server 2005 SE SP1. The packages are run from the filesystem, not the database.
Has anyone encountered the same problem and know a solution? I can't find any info on the internet.
- Matthijs
View 6 Replies
View Related
Apr 11, 2007
2:30:03 AM SQL Server Scheduled Job 'Our Job Name' (0x888B36086CCCC34FB353B408DEBE0432) - Status: Failed - Invoked on: 2007-04-11 02:30:00 - Message: The job failed. The Job was invoked by Schedule 30 (Our Job Name). The last step to run was step 1 (Our Job Name).
Where do you begin to discover the cause of the crash?
View 6 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
Iīm running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Sep 18, 2007
The following error occurred but did not provide any additional info.
[DTS.Pipeline] Error: The PrimeOutput method on component "Pgrs - tr_hist" (14596) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
For this package I am trying to use DataDirect's ODBC driver for a Progress OpenEdge Database version 9.1E to move data to SQL Server 2005 in order to make use of SQL's BI suite. I have consulted the DataDirect and have that the driver is functioning properly. The driver works perfectly from another application. They suggest that the problem is in the the datareader's or the connection manager's implementation of the driver.
Please tell me what is the cause of this or at least how to troubleshoot this problem.
View 18 Replies
View Related
Mar 31, 2008
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
View 17 Replies
View Related
May 16, 2008
Hi to all!
When I want to execute my package as a job in a SQL Server 2005, I get this Message:
Executed as user: EDAsvcSQLServerPMS. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 09:46:00 Error: 2008-05-16 09:46:01.41 Code: 0xC0048020 Source: Data Flow Task Data Flow Task (DTS.Pipeline) Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048020 Source: Data Flow Task DTS.Pipeline Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048021 Source: Data Flow Task Excel Source [1] Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Excel Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://ww... The package execution fa... The step failed.
The package works fine on the developed server but when I try it out on our integration server it won't go through without these errors. The protection level is set on DontSaveSensitiv and allready I had an error less.
I hope someone can help me, because I can't find anything with google.
Thanx!
Regards,
swisskiwigirl
View 6 Replies
View Related
Oct 2, 2006
Hi,
I'm at a loss as to why i am getting the following error:
Retrieving the COM class factory for component CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}failed due to the following error: 80040154
I am calling the package from a C# application which i have installed within a citrix environment. The application works without any trouble on my development machine but as soon as i run the code that executes the SSIS pacakge i get the error. Can anyone enlighten me as to what is causing this?
Many thanks in advance,
Grant
View 4 Replies
View Related
Sep 14, 2007
I have a DTS package which deletes some rows in a table and then inserts new ones from a Dbase file.
When I execute the package it works perfectly, but when I shedule it as a job it gives this error message:
Executed as user: LOMMELDOMAdministrator. ...DTSStep_DTSExecuteSQLTask_2 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: Copy Data from GRES to [ZNA].[dbo].[GRES] Step DTSRun OnError: Copy Data from GRES to [ZNA].[dbo].[GRES] Step, Error = -2147221164 (80040154) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 700 Error Detail Records: Error: -2147221164 (80040154); Provider Error: 0 (0) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 700 Error: -2147221164 (80040154); Provider Error: 0 (0) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 4700 Error: -2147221164 (... Process Exit Code 5. The step failed.
The deleting of the rows works but the import from the Dbase doens't, I thought it was a security issue. So I made sure the JobAgent has all the rights it needs to access the directory of the Dbase file.
Any clues?
View 8 Replies
View Related
Apr 9, 2008
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
View 1 Replies
View Related
Nov 7, 2007
I am very new to SQL Server 2005, and I am currently trying to migrate a 2000 db to 2005.
I have now migrated all the DTS to SSIS, removing any legacy & replacing with new functionality.
I have been through a group of related packages ironing out any problems. They ALL now run fine when called individually.
However, I am now having problems with the parent package that is used to string these all together. It will not even run the 1st package.
For info, the first task of this package is a "Transfer SQL Server Objects Task". I am copying a few tables with data, but WITHOUT indexes, etc.
Following this, there is an "Execute SQL Task" that creates an index on one of those copied tables.
To get past another issue I had to set the "CopySchema" property of the "Transfer..." task to true, but did not select any schemas to transfer.
Now, when running the PARENT package, it is failing at the 1st step of the 1st package as follows:
Error: 0xC002F325 at Copy LT Data Tables, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert duplicate key row in object 'dbo.Hidden Hearing Limited$Telemarketer' with unique index 'IX_Hidden Hearing Limited$Telemarketer1'.".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
I have been searching and searching, finding similar problems, and even the same error codes, but nothing quite matching this particular scenario.
I have been trying to set the "DelayValidation" at various levels, but with no luck.
I would greatly appreciate any help in trying to resolve this. Has anyone else had the same, or similar, issue?
Many Thanks,
Simon
View 3 Replies
View Related
Nov 7, 2007
I am very new to SQL Server 2005, and I am currently trying to migrate a 2000 db to 2005.
I have now migrated all the DTS to SSIS, removing any legacy & replacing with new functionality.
I have been through a group of related packages ironing out any problems. They ALL now run fine when called individually.
However, I am now having problems with the parent package that is used to string these all together. It will not even run the 1st package.
For info, the first task of this package is a "Transfer SQL Server Objects Task". I am copying a few tables with data, but WITHOUT indexes, etc.
Following this, there is an "Execute SQL Task" that creates an index on one of those copied tables.
To get past another issue I had to set the "CopySchema" property of the "Transfer..." task to true, but did not select any schemas to transfer.
Now, when running the PARENT package, it is failing at the 1st step of the 1st package as follows:
Code BlockError: 0xC002F325 at Copy LT Data Tables, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert duplicate key row in object 'dbo.Hidden Hearing Limited$Telemarketer' with unique index 'IX_Hidden Hearing Limited$Telemarketer1'.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
I have been searching and searching, finding similar problems, and even the same error codes, but nothing quite matching this particular scenario.
I have been trying to set the "DelayValidation" at various levels, but with no luck.
I would greatly appreciate any help in trying to resolve this. Has anyone else had the same, or similar, issue?
Many Thanks,
Simon
View 15 Replies
View Related
Jun 12, 2007
I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:
Date 6/12/2007 4:19:15 PM
Log Job History (VistaODSFeed)
Step ID 0
Server 006-DEVSQL2005
Job Name VistaODSFeed
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
ideas?
View 1 Replies
View Related
Sep 16, 2007
I run an ssis task with right click in the BIDS.
the task transform data of the tables between sql2005 DB to another sql2005 DB.
this is the error I get:
Code Snippet
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"TCP Provider: The semaphore timeout period has expired.
".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables2
i have a similar task, only diffrent tables that being transfered, same settings. this task run succesfully.
for the task that fails it takes a long time to run (something like half an hour, maybe more) and then it falils. the task that succeeds finish fast (something like 5 minutes). the data in the tables that being transeferred in the good task is much smaller than the data in the tables in the failed task.
Anyone knows the reason to the error.
Thanks.
View 14 Replies
View Related
Sep 10, 2007
Hello,
I created a ssis package to transfer data between tables of sql2005 DB to another sql2005 database.
when i run it from BIDS with right click -- > execute package i get this error:
Code Snippet
Error: 0xC002F325 at CopyTables1, Transfer SQL Server Objects Task: Execution failed with the following error: "Cannot apply value null to property Login: Value cannot be null..".
anyone can help here.
Thanks.
View 4 Replies
View Related
Sep 12, 2007
Hello.
I run a ssis package of transferring data between sql2005 databases.
I get this error:
Code Snippet
Error: 0xC002F325 at CopyTables2, Transfer SQL Server Objects Task: Execution failed with the following error:
"ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"Could not continue scan with NOLOCK due to data movement.".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables2
i run the package currently with right click on the package on the BIDS.
what is the reason for this error? how can I check it?
Thanks.
View 6 Replies
View Related
Apr 27, 2001
I am trying to run DTS package from query analyzer and getting following error .
Command from query analyzer is
go
master..xp_cmdshell 'dtsrun /Sirhahadb01 /Usa /P<sa password> /Ntestpack'
Output error message is
output
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147217887 (80040E21)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Error Detail Records:
Error: -2147217887 (80040E21); Provider Error: 0 (0)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
Sujit
View 2 Replies
View Related
Feb 23, 2008
Hi All,
I would appreciate if someone can help me with the following:
I have package that I designed on 32 bit system. It was copied over to 64 bit server's directory (Production).
I am trying to execute that package using DtExec utility. My package has some parameters that I am trying to set on the command prompt using /SET option. Everything runs fine on 32 bit system (that is my dev box) but I get the following on 64 bit system (Production):
Command that I am trying to run is:
dtutil.exe /FILE "e:external_dataSSISXXX.dtsx"
/SET "Package.Variables[User::ASServer].Properties[Value]";"CP_Promotion"
I get the following errors:
Microsoft (R) SQL Server SSIS Package Utilities
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2004. All rights reserved.
Option "/SET" is not valid.
On 64 bit system, I don't have 32 bit version of DTExec installed. According to Books On Line the syntax to use DTExec on both 32 bit and 64 bit system are the same. Can /SET not be used in 64 bit system.
Thanks in advance for your help.
View 7 Replies
View Related
Aug 21, 2014
What do I need to stop this error?
Started: 5:05:48 PM
Error: 2014-08-21 17:05:50.64
Code: 0xC000F427
Source: File System Task
Description: To run a SSIS package outside of SQL Server Data Tools you must install File System Task of Integration Services or higher.
End Error
View 1 Replies
View Related
Mar 22, 2007
Hello,
I have a package that has a FOREACHLOOP container. Inside the container is a SCRIPT task that runs a stored procedure and writes the output of the sp to a file.
That part works fine.
However, if I add a second script task inside the FOREACHLOOP container, I get error messages when running the second script task.
The second script task is identical to the first script task, except for the connection information. That is, it's doing the same thing, but running the sp on another server.
I tried removing the second script task from the FOREACHLOOP container, and putting it in it's own FOREACHLOOP container, but it still gives the same error.
This is the error I'm receiving:
Error 30009: Reference required to assembly 'System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' containing the implemented interface 'System.Xml.Serialization.IXmlSerializable'. Add one to your project.
Line 7 Column 22 through 30
Private objDT As DataTable
View 5 Replies
View Related
Aug 7, 2007
Hi
I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB.
When I execute the package from the BIDS it execute succesfully.
However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error:
the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter.
what is the reason for this error?
I aprriciate your help.
SeoAndSo.com
View 6 Replies
View Related
May 18, 2006
This package which is a child package has been running successfully for quite some time now. All of a sudden we are getting these intermittant error messages. Does anyone have any ideas what to do or check for?
thanks
===========================
Error portion
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
====================================================
Complete child package log
Executing ExecutePackageTask: D:ssissrwpackagesSRW_ORACLE_SALES_FTBL.dtsx
Information: 0x40016041 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from the XML file "D:SSISconfigurationCONFIG-STAGE1.dtsConfig".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SSIS_Configurations]";"System Configuration Settings";".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SRW_SSIS_Configurations]";"SRW Main Configurations";".
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, REV GL SEGS [307]: component "REV GL SEGS" (307) has cached 780 rows.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get oper unit [813]: component "get oper unit" (813) has cached 12 rows.
Warning: 0x802090E4 at CF-DFT Oracle Sales Fact, get oper unit [813]: The Lookup transformation encountered duplicate reference key values when caching reference data. The Lookup transformation found duplicate key values when caching metadata in PreExecute. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get header txn type for IC flag [13685]: component "get header txn type for IC flag" (13685) has cached 768 rows.
Information: 0x4004300C at CF-DFT Oracle Sales Fact, DTS.Pipeline: Execute phase is beginning.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100484768 bytes, but was unable to swap out any buffers to relieve memory pressure. 83 buffers were considered and 83 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100484768 bytes.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 31 percent memory load. There are 8587960320 bytes of physical memory with 5869387776 bytes free. There are 2147352576 bytes of virtual memory with 1223802880 bytes free. The paging file has 12673945600 bytes with 9901600768 bytes free.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100483760 bytes, but was unable to swap out any buffers to relieve memory pressure. 162 buffers were considered and 162 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has started.
Information: 0x402090E0 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has ended.
Information: 0x40043009 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at CF-DFT Oracle Sales Fact, DTS.Pipeline: "component "TEMP OUTPUT" (998)" wrote 0 rows.
Task failed: CF-DFT Oracle Sales Fact
Warning: 0x80019002 at SRW_ORACLE_SALES_FTBL: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CF-EPGT SRW_ORACLE_SALES_FTBL
Warning: 0x80019002 at CF-SQC Facts: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SRW_MAIN: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SRW_Main.dtsx" finished: Failure.
View 9 Replies
View Related
Dec 17, 2007
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
View 5 Replies
View Related
Oct 10, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
View 14 Replies
View Related
Mar 10, 2008
Hi,
I created a SSIS package which will generate an output file and place it on a remote fileshare location which will look something like this
\RemoteServerNameRemoteFilePath
The package is executing fine when I am executing it through BIDS or through execute package utility and writing the output file to remote file share location.
I created a SQL job for the package and ran the Job. Then, its throwing an error saying
Executed as user: DomainUser. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:33:06 AM Error: 2008-03-10 10:33:22.22 Code: 0xC020200E Source: DFT_Generate Output File Description: Cannot open the datafile "
\RemoteServerNameRemoteFilePathOutputFileName.txt". End Error Error: 2008-03-10 10:33:22.34 Code: 0xC004701A Source: DFT_Generate Output File DTS.Pipeline Description: component "FF_DST_Output" (160) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:33:06 AM Finished: 10:33:22 AM Elapsed: 15.891 seconds. The package execution failed. The step failed.
DomainUser have all the permissions on the remote file share location.
SQL server agent is running with the log-on account DomainUser(same as the above).
Could anyone help me in resolving this issue.
Thanks & Regards,
Sriram.
View 8 Replies
View Related
Oct 10, 2007
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):
Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.
Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.
BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).
(5 row(s) affected)
Msg 213, Level 16, State 7, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Msg 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
The code I am using is:
-- the original database (use 'SET @DB = NULL' to disable backup)
DECLARE @DB varchar(200)
SET @DB = 'Marketing'
-- the backup filename
DECLARE @BackupFile varchar(2000)
SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'
-- the new database name
DECLARE @TestDB2 varchar(200)
SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'
-- the new database files without .mdf/.ldf
DECLARE @RestoreFile varchar(2000)
SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2
DECLARE @RestoreLog varchar (2000)
SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2
-- ****************************************************************
-- no change below this line
-- ****************************************************************
DECLARE @query varchar(2000)
DECLARE @DataFile varchar(2000)
SET @DataFile = @RestoreFile + '.mdf'
DECLARE @LogFile varchar(2000)
SET @LogFile = @RestoreLog + '.ldf'
IF @DB IS NOT NULL
BEGIN
SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')
EXEC (@query)
END
-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'
-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'
-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'
-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'
IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)
BEGIN
SET @query = 'DROP DATABASE ' + @TestDB2
EXEC (@query)
END
RESTORE HEADERONLY FROM DISK = @BackupFile
DECLARE @File int
SET @File = @@ROWCOUNT
DECLARE @Data varchar(500)
DECLARE @Log varchar(500)
SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')
CREATE TABLE #restoretemp
(
LogicalName varchar(500),
PhysicalName varchar(500),
type varchar(10),
FilegroupName varchar(200),
size int,
maxsize bigint
)
INSERT #restoretemp EXEC (@query)
SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'
SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'
PRINT @Data
PRINT @Log
TRUNCATE TABLE #restoretemp
DROP TABLE #restoretemp
IF @File > 0
BEGIN
SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +
' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +
QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)
EXEC (@query)
END
View 1 Replies
View Related
