Help Needed With This Query (sproc)
Jun 3, 2008
When i try to run this sproc no rows are are returned but if i give PlanId = 898 and PortfolioId = 1913 i should get one row.. This is my sproc
ALTER PROCEDURE [dbo].[rpt_Custom_AllocationsSub]
(
@PlanId int,
@PortfolioId int
)
AS
SELECT
c.PlanId,
c.PlanName,
pp.PortfolioId,
pp.PortfolioName,
pp.PortfolioDescription,
f.FundId,
p.displayOrder,
case When pf.PlanFundDisplayName IS NULL THEN f.ShortName ELSE pf.PlanFundDisplayName END FundNames,
CAST(p.AllocationPercent AS integer) AS PPF_Percent
FROM
Fund f
INNER JOIN PlanPortfolioFund p
ON f.FundId = p.FundId
INNER JOIN PlanFund pf
on f.FundId = pf.FundId
RIGHT OUTER JOIN [ClientPlan] c
INNER JOIN PlanPortfolio pp ON c.PlanId = pp.PlanId
ON p.PortfolioId = pp.PortfolioId
WHERE
c.PlanId = @PlanId
ANDp.PortfolioId = @PortfolioId
AND pf.PlanId = pp.PlanId
order by p.DisplayOrder
This is my table structure
ClientPlanId
PlanId int indentity
PlanFund -- PlanId int, FundId int
PlanPortfolio -- PortfolioId int, PlanId int, PortfolioName varchar , PortfolioDescription varchar
PlanPortfolioFund PortfolioId int, FundId int, AllocationPercent int.
any help will be appreciated...
Thanks
Karen
View 2 Replies
ADVERTISEMENT
Dec 19, 2007
Hi, I am trying to Implement Multi parameter...
If i give NULL it works fine but if i give '7,4' I get this error message Msg 102, Level 15, State 1, Line 18 Incorrect syntax near '17'.
This is my sproc
ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@ClientId nvarchar(max)= NULL,
@StartDate datetime,
@EndDate datetime
AS
Declare @SQLTEXT nvarchar(max)
If @ClientId IS NULL
Begin
Select
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
--cp.ClientId = @ClientId
--AND
o.OrderDate BETWEEN @StartDate AND @EndDate
ORDER BY
o.OrderId DESC
END
ELSE
BEGIN
SELECT @SQLTEXT = 'Select
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
cp.ClientId in (' + @ClientId + ')
AND
o.OrderDate BETWEEN ' + Convert(varchar,@StartDate) + ' AND ' + convert(varchar, @EndDate) + '
ORDER BY
o.OrderId DESC'
execute (@SQLTEXT)
END
any help will be appreciated.
Regards
Karen
View 4 Replies
View Related
Jan 24, 2008
Hi,
I want to write a sproc whose main table is Order and it inner joins another table called OrderShipTo with a one to many relationship so the way i have written the first query is as follows
SELECT
o.OrderId,
o.OrderDate,
o.PlanId,
o.CreatedByUserId,
o.Quantity,
o.BillToCompany,
o.BillToContact,
o.BillToAddress,
o.BillToCity,
o.BillToState,
o.BillToZip,
o.BillToEmail,
o.BillToPhone,
o.ShipToIsBillTo,
o.BookTypeId,
o.RequiredDeliveryDate,
o.SpecialInstructions,
o.ApprovedBy,
o.ApprovedByPhone,
o.ApprovedByEmail,
os.ShipToId,
os.ShipTypeId,
os.ShipToCompany,
os.ShipToContact,
os.ShipToAddress,
os.ShipToAddress1,
os.ShipToCity,
os.ShipToState,
os.ShipToZip,
os.ShipToEmail,
os.ShipToPhone,
os.Quantity
FROM
[Order] o
Inner Join OrderShipTo os on o.OrderId = os.OrderId
WHERE
o.OrderId = @OrderId
So suppose if i give an OrderId of 15 In the OrderShipTo table they may be 3 Or 2 or none entries for this order in the Ordership to Table So if there is 3 entries in the OrderShip i will get 3 rows of data which is correct... But i just want o.Columns to appear once and i want n rows for the os.Columns to appear.
So in Order To acheive i wrote this query DECLARE @OrderId int
SET @OrderId = 311
SELECT
o.OrderId,
o.OrderDate,
o.PlanId,
o.CreatedByUserId,
o.Quantity,
o.BillToCompany,
o.BillToContact,
o.BillToAddress,
o.BillToCity,
o.BillToState,
o.BillToZip,
o.BillToEmail,
o.BillToPhone,
o.ShipToIsBillTo,
o.BookTypeId,
o.RequiredDeliveryDate,
o.SpecialInstructions,
o.ApprovedBy,
o.ApprovedByPhone,
o.ApprovedByEmail
FROM
[Order] o
WHERE
o.OrderId = @OrderId
EXEC usp_OrderShipToLoadByOrderId @OrderId
But at the end i want all the rows o.Columns + the rows from os.columns... I also tried giving a union of both the tables but that didnt work of type mismatch..
How can i acheive that???
Regards
Karen
View 5 Replies
View Related
Nov 8, 2007
Hi i am not sure as u which forum to post but.. i wanted to write a stored procedure and i am stuck as to how to get the data.I have written some which i will post it below but i am not sure how should i go ahead.. These are tables...
I have a table called SourceDBF Which has the following Fields...
RowNumber Plan_NUM PART_ID FUND_ID SOURCE_ID OPENINBAL .... ENDINGBAL
1 265 12345678 ABCDE 1 12.23 17.23
2 265 12345678 ABCDE 3 15.45 19.11
3 265 1234986 CFDEV 1 12.46 20.21
So on and so forth so basically the above table willl have PART_ID associated wiht different SOURCE_IDs
And i have another table called PlanDBF WHICH Has the following feilds...
PLAN_NUM PLANNAME SRC1NAME SRC2NAME SRC3NAME ..... SRC15NAME
265 abc Plan Deferral Matching Rollovers SafeHarbor
The relationship between the 2 tables is in PLAN_NUM and if the Source_Id = 1 i need to pull SRC1NAME , If 2 - SRC2Name and so forth..
I want to write a query that will find SOURCE_ID thats been listed in the SourceDBf table but that dont have a SRCNAME to it.. and this is my query to get the corresponding name for the SOURCE_ID and it works fine
Code Block
Select Distinct
@ClientId,
SOURCE_NUM,
(Select CASE s.SOURCE_NUM When 1 Then SRC1NAME
WHEN 2 Then SRC2NAME
WHEN 3 THEN SRC3NAME
WHEN 4 THEN SRC4NAME
WHEN 5 THEN SRC5NAME
WHEN 6 THEN SRC6NAME
WHEN 7 THEN SRC7NAME
WHEN 8 THEN SRC8NAME
WHEN 9 THEN SRC9NAME
WHEN 10 THEN SRC10NAME
WHEN 11 THEN SRC11NAME
WHEN 12 THEN SRC12NAME
WHEN 13 THEN SRC13NAME
WHEN 14 THEN SRC14NAME
WHEN 15 THEN SRC15NAME
END
FROM
PlanDBF p
Where
p.PLAN_NUM = s.PLAN_NUM
) as SourceName
FROM
SourceDBF s
But when i try to join query with this query it doesnt work
Code Block
SELECT
RowNumber,
'Source.Dbf, Plan.Dbf',
'Source Name is missing for Source Number "' + IsNull(RTrim(f.SOURCE_NUM),'Unknown') + '" in Plan.Dbf table.'
FROM
SourceDbf f
I am trying to get SOURCE_ID which do not hae a SRCName.
any help will be appreciated..
Regards,
Karen
View 5 Replies
View Related
Dec 19, 2007
Hi,
I am trying to Implement Multi parameter... If i give NULL it works fine but if i give '7,4'
I get this error message
Msg 102, Level 15, State 1, Line 18
Incorrect syntax near '17'.
This is my sproc
Code Block
ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@ClientId nvarchar(max)= NULL,
@StartDate datetime,
@EndDate datetime
AS
Declare @SQLTEXT as nvarchar(max)
if @ClientId is null
Begin
Select
o.[OrderId],
o.[OrderDate],
o.[CreatedByUserId],
c.LoginId,
o.[Quantity],
o.[RequiredDeliveryDate],
cp.PlanId,
cp.ClientPlanId,
cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId and o.CreatedByUserId = cp.UserId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
--cp.ClientId = @ClientId
--AND
o.OrderDate BETWEEN @StartDate AND @EndDate
ORDER BY
o.OrderId DESC
END
ELSE
BEGIN
SELECT @SQLTEXT = 'Select
o.[OrderId],
o.[OrderDate],
o.[CreatedByUserId],
c.LoginId,
o.[Quantity],
o.[RequiredDeliveryDate],
cp.PlanId,
cp.ClientPlanId,
cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId and o.CreatedByUserId = cp.UserId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
cp.ClientId in (' + @ClientId + ')
AND
o.OrderDate BETWEEN ' + Convert(varchar, @StartDate) + ' AND ' + convert(varchar, @EndDate) + '
ORDER BY
o.OrderId DESC'
execute (@SQLTEXT)
END
any help will be appreciated.
Regards
Karen
View 4 Replies
View Related
Mar 4, 2007
I have a query that works fine but fails as a sproc.
QUERY:
SELECT UserName, ProfileId, FirstName, LastName
FROM dbo.CustomProfile JOIN dbo.aspnet_Users
ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId
WHERE UserName = 'Brown'
SPROC:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetProfileId]
@UserName nvarchar
AS
SELECT UserName, ProfileId, FirstName, LastName
FROM dbo.CustomProfile JOIN dbo.aspnet_Users
ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId
WHERE UserName = @UserName
The query returns results. In SQL Server Management Studio when I execute the sproc and enter the value Brown the sproc returns no values; i.e. 0
View 2 Replies
View Related
Feb 7, 2007
I'm using an SqlDependency so I'll get an alert when the data under a query changes. When the query does not meet the criteria spelled out here http://msdn2.microsoft.com/en-us/library/aewzkxxh.aspx then I immediately get a SqlNotificationEventArgs event with the "Invalid" note. This is good.
I would like to know that a query is invalid before I try it with my ASP.NET application. Is there a sproc I can give to my SQL developers so they can test that they haven't used any stuff that would invalidate SqlDependency? What I'm hoping is that there's already a system sproc which could be called...
exec sp_QueryInvalidForNotification "exec myTestSproc 99"
Does such a sproc exist? Or does anyone know how to write one?
View 1 Replies
View Related
Feb 13, 2007
I have attached the results of checking an Update sproc in the Sql database, within VSS, for a misbehaving SqlDataSource control in an asp.net web application, that keeps telling me that I have too many aurguments in my sproc compared to what's defined for parameters in my SQLdatasource control.....
No rows affected.
(0 row(s) returned)
No rows affected.
(0 row(s) returned)
Running [dbo].[sp_UPD_MESample_ACT_Formdata]
( @ME_Rev_Nbr = 570858
, @A1 = No
, @A2 = No
, @A5 = NA
, @A6 = NA
, @A7 = NA
, @SectionA_Comments = none
, @B1 = No
, @B2 = Yes
, @B3 = NA
, @B4 = NA
, @B5 = Yes
, @B6 = No
, @B7 = Yes
, @SectionB_Comments = none
, @EI_1 = N/A
, @EI_2 = N/A
, @UI_1 = N/A
, @UI_2 = N/A
, @HH_1 = N/A
, @HH_2 = N/A
, @SHEL_1 = 363-030
, @SHEL_2 = N/A
, @SUA_1 = N/A, @SUA_2 = N/A
, @Cert_Period = 10/1/06 - 12/31/06
, @CR_Rev_Completed = Y ).
No rows affected.
(0 row(s) returned)
@RETURN_VALUE = 0
Finished running [dbo].[sp_UPD_MESample_ACT_Formdata].
The program 'SQL Debugger: T-SQL' has exited with code 0 (0x0).
And yet every time I try to update the record in the formview online... I get
Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I have gone through the page code with a fine tooth comb as well as the sproc itself. I have tried everything I can think of, including creating a new page and resetting the fields, in case something got broken that I can't see.
Does anyone have any tips or tricks or info that might help me?
Thanks,
SMA49
View 3 Replies
View Related
Apr 23, 2004
I'm sorta new with using stored procedures and I'm at a loss of how to achieve my desired result.
What I am trying to do is retrieve a value from a table before it is updated and then use this original value to update another table. If I execute the first called sproc in query analyzer it does return the value I'm looking for, but I'm not really sure how to capture the returned value. Also, is there a more direct way to do this?
Thanks,
Peggy
Sproc that is called from ASP.NET:
ALTER PROCEDURE BP_UpdateLedgerEntry
(
@EntryLogID int,
@ProjectID int,
@NewCategoryID int,
@Expended decimal(10,2)
)
AS
DECLARE@OldCategoryID int
EXEC @OldCategoryID = BP_GetLedgerCategory @EntryLogID
UPDATE
BP_EntryLog
SET
ProjectID = @ProjectID,
CategoryID = @NewCategoryID,
Expended = @Expended
WHERE
EntryLogID = @EntryLogID
EXEC BP_UpdateCategories @ProjectID, @NewCategoryID, @Expended, @OldCategoryID
Called Sprocs:
*********************************************
BP_GetLedgerCategory
*********************************************
ALTER PROCEDURE BP_GetLedgerCategory
(
@EntryLogID int
)
AS
SELECT CategoryID
FROM BP_EntryLog
WHERE EntryLogID = @EntryLogID
RETURN
*********************************************
BP_UpdateCategories
*********************************************
ALTER PROCEDURE BP_UpdateCategories
(
@ProjectID int,
@NewCategoryID int,
@Expended decimal(10,2),
@OldCategoryID int
)
AS
UPDATE
BP_Categories
SET CatExpended = CatExpended + @Expended
WHERE
ProjectID = @ProjectID
AND
CategoryID = @NewCategoryID
UPDATE
BP_Categories
SET CatExpended = CatExpended - @Expended
WHERE
ProjectID = @ProjectID
AND
CategoryID = @OldCategoryID
View 2 Replies
View Related
Jan 20, 2004
create procedure dbo.GetZipID( @City varchar(30), @State char(2), @Zip5 char(6))
as
DECLARE @CityID integer
declare @StateID integer
declare @ZipID integer
set @ZipID=2
set @Zip5=lTrim(@Zip5)
if @Zip5<>''
SET @ZIPID = (select Min(lngZipCodeID) AS ZipID from ZipCodes where strZipCode=@Zip5)
if @ZipID is null
set @CityID= EXEC GetCityID(@City);
set @StateID= EXEC GetStateID(@State);
insert into ZipCodes(strZipCode,lngStateID,lngCityID) values(@Zip5,@StateID,@CityID)
if @@ERROR = 0
SET @ZIPID = @@Identity
select @ZIPID
GetCityID and GetStateID are two stored procs, how do I execute those two stored procs
in the above stored proc? I mean what is the syntax??
Tks
View 2 Replies
View Related
Jul 23, 2007
i have marked in bold the query in question ..whch gives me the the runtime error mentioned at the below , i double checked everything all the table names and the field names are correct so whats the problem , please anyone??im really stumped! if (Radio_Btn_Book.Checked == true) { string book_query = "update Issue_Book_Reserve I set I.Issue_Book_Reserve_state = 1 where I.Book_Id = Books.Book_Id and Books.Book_Name = '" + Session["Book_name"].ToString()+"'"; SqlCommand Cmd_book = new SqlCommand(book_query, con); con.Open(); Cmd_book.ExecuteNonQuery(); con.Close(); } ERROR: The column prefix 'Books' does not match with a table name or alias name used in the query.The column prefix 'Books' does not match with a table name or alias name used in the query.
View 3 Replies
View Related
Jan 14, 2008
Hi,
TABLES
(Association CONTAINS COLUMNS AssociationID),
(Group CONTAINS COLUMNS GroupID, GroupName, AssociationID),
(GroupMembers CONTAINS COLUMNS GroupID, GroupMemberID, UserprofileID, DateCreated, DateRemoved),
(UserProfiles CONTAINS COLUMNS UserProfileID, UserID),
(AllUsers CONTAINS COLUMNS UserID, FirstName, LastName)
I am trying to write a query to collect information about from the tables. I need to collect all the Users who are not members of Group A in Association I.
Note that Users can belong to more than one group and have more than one profile.
I would appreciate it if you could help me figure out how to deal with this logic. Thanks in Advance
View 2 Replies
View Related
Mar 20, 2008
Hi
I have a function which returns the periodId from the period table and the function is as follows:
ALTER FUNCTION [dbo].[udf_Quarter] (@Date datetime)
RETURNS int
AS
BEGIN
DECLARE @month int
SET @month = Month(@Date)
RETURN
CASE
WHEN @month BETWEEN 1 AND 3 THEN 5
WHEN @month BETWEEN 4 AND 6 THEN 6
WHEN @month BETWEEN 7 AND 9 THEN 7
WHEN @month BETWEEN 10 AND 12 THEN 8
END
END
Which works fine but i want to do the following with it. We produce quarterly statements.. So the user comes in jan or the begining of Feb to upload and process and order Statements from 10/31 to 12/31 the the 4 quarter data.. So Is there a way i can check if the user orders the statement in between jan and feb it has to reture PeriodId 5.
Any help will be appreciated.
Regards,
Karen
View 5 Replies
View Related
Apr 10, 2008
I have three parameters called @rsLengthofservice, @rsLengthofServicematch and @rsLenghtofservicePS.
How do i check if all the three parameters have the same value..
Any help will be appreciated..
Regards,
Karen
View 5 Replies
View Related
Apr 25, 2008
Hi,
I have this query
SELECT
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join Plan cp on o.PlanId = cp.PlanId and o.CreatedByUserId = cp.UserId
Inner Join User c on o.CreatedByUserId = c.UserId
WHERE
--cp.ClientId = @ClientId
--AND
o.OrderDate BETWEEN @StartDate AND @EndDate
ORDER BY
o.OrderId DESC Which gives the list of order from the start date to the end date..but it doesnt List the orders which are some mins apart. For eg. 16524/24/2008 10:48:05 AM4252840
16534/25/2008 10:15:42 AM378550
16544/25/2008 10:51:24 AM3147110 16614/25/2008 1:35:54 PM425045
16624/25/2008 2:30:43 PM4174387130
16634/25/2008 2:47:14 PM154825
16644/25/2008 2:49:10 PM265085
it listed order no. 1652 and 1654 but not 1653 and in the next 4 it didnt list 1663.. why is this happening.. I am using a reports in the report server. any help will be appreciated. Regards,Karen
So it kist
View 3 Replies
View Related
Nov 17, 2003
Hi everyone,
I consider myself good at SQL when it comes to SELECTS, UPDATES, INSERTS etc - but now I'm actually wanting to delete a record.
How can I do this? Can I just use:
DELETE * FROM Table WHERE RowID = '23'
??
Can anyone help me out?
Cheers
Andrew
View 4 Replies
View Related
Jun 6, 2005
hi,
I have three tables with the following fields:
User:
UserID
Name
Test:
TestID
Name
Grade:
GradeID
TestID
UserID
Score
And I want to display the result something like this:
UserID Name Test1 Test2 Test3
1
Azam
23
34 45
2
Ali
34
45 56
How can this be accomplised thanks,
View 10 Replies
View Related
Aug 7, 2005
my app contains one form (aspx) and it has different controls to be filled by user (textbox,radiobutton ..etc)it has one button which i want to use to pass values entered in these controls to other page and do some queries to sql server there (2nd page)Now the thing is ...my controls can have NULL values ...like user could enter just one parameter and hit button or user can fill 2 parameter and hit enter so on the other hand (2nd page) how should i query the database accordingly ....
View 2 Replies
View Related
Dec 2, 2005
I have some data that looks like this:
field1(pk) field2 field3
563136 199535840A D2119562408 199615461C D2119562806 199748610A D2119547463 199748610A D2368562278 200255598A D2368562286 200255598A D2468
Field2 can have the same value.
What I need is to return all records where field3 is not 'D2468' ever for field2. So with the above data, I'd want the first 4 records returned, but not 5 and 6 because for those field2 is the same value and in 6, field3 is 'D2468'.
So, I can't simply say:
SELECT a.field2FROM table1 a inner join table2 b on a.field2 = b.field2 and a.field5 = b.field5where a.field3 not like 'D2468'
because it will still return record 5.
Can anyone help me with this? Thank you!
View 3 Replies
View Related
Jul 5, 2000
Hi
I need help here. I have two queries one on each server and one does not work the way it should be. Can some help me here in figuring out if both these queries are same or no. If there is any difference, what is causing that difference. Thanks
Query1:
SELECT Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.CountyName,Shipment.Zip, Shipment.WarehouseCd, Phone
FROM Orders INNER JOIN ((NewWarehouse
INNER JOIN Shipment ON NewWarehouse.WarehouseCd = Shipment.WarehouseCd)
INNER JOIN WarehouseCurrency ON NewWarehouse.WarehouseCd = WarehouseCurrency.WarehouseCd)
INNER JOIN Warehouse ON (Shipment.CountryCd = Warehouse.CountryCd) AND (NewWarehouse.WarehouseCd = Warehouse.WarehouseCd)) ON Orders.OrderNum = Shipment.OrderNum
WHERE BE = 5 AND AddressTy = 1 AND WarehouseCurrency.CurrencyCd ='USD' AND Active = -1
GROUP BY Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.CountyName, Shipment.Zip, Shipment.WarehouseCd, Phone
ORDER BY Min(Shipment.OrderNum) DESC)
Query 2: (This is working)
SELECT Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.Zip, Shipment.WarehouseCd, Shipment.Phone, Shipment.CountyName
FROM ((Orders INNER JOIN (NewWarehouse
INNER JOIN Shipment ON NewWarehouse.WarehouseCd = Shipment.WarehouseCd) ON Orders.OrderNum = Shipment.OrderNum)
INNER JOIN WarehouseCurrency ON NewWarehouse.WarehouseCd = WarehouseCurrency.WarehouseCd)
INNER JOIN Warehouse ON (NewWarehouse.WarehouseCd = Warehouse.WarehouseCd) AND (Shipment.CountryCd = Warehouse.CountryCd)
WHERE (((Orders.BE)=5) AND ((Shipment.AddressTy)=1) AND ((WarehouseCurrency.CurrencyCd)='USD') AND ((NewWarehouse.Active)=-1))
GROUP BY Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.Zip, Shipment.WarehouseCd, Shipment.Phone, Shipment.CountyName
ORDER BY Min(Shipment.OrderNum) DESC
I am sorry I am not that good in sql as some of you may be. Thanks.
View 3 Replies
View Related
May 31, 2006
I have 2 tables:
Table1 has a field [Description](varchar) 100
Table2 has a field [IDDescription] int and field [Description] varchar(100)
In table 2 I have IDDescription store but some time also description wich is not store in table2
I need to pull all description (if it is from table2 or table1). How do I do this?
View 2 Replies
View Related
Dec 16, 2005
I have a query that need to do something like this.
About the data:
---------------
I have a rules table which has got all the rules, and a log table that has the logs which says whether the rules are satisfied or not over a point of time.
select rules, sum(decode(status,'pass','1')) as passed, sum(decode(status,'fail',1)) as failed from rulestable,logstable where rulestable.logid=logstable.id
My expected Output
---------------------------------
Rule1 passed= 10 failed=12
Rule2 passed=11 failed=15
But i donot have decode() function in mssql nor can I use IF ELSE here. Can anyone please tell me how this can be implemented here?
Thanks
View 2 Replies
View Related
Jan 14, 2007
Ok guys.
Lets say i have 2 tables. One called 'Leads' and the other called 'Sales_Reps'. When a new lead comes in would like to assign it to the sales rep who has the least number of active leads. If there is a tie, I'll just assign it alphabetically between the sales reps who are tied with the least.
Can someone point me in the right direction here? I would assume I'd need to do some sort of select count, but I'm not sure how to begin.
Thanks!
View 8 Replies
View Related
Nov 20, 2007
Hi pals,
I need small help.
I have a table with data as follows.
select * from test_data
c1 c2 c3
----------------------
111 4 101
122 3 101
133 2 102
144 2 103
155 1 103
Now i need to generate a new column c4 as sequence number in the output
I need to get the output something as follows
c4 c1 c2 c3
-----------------------------
1 111 4 101
2 122 3 101
1 133 2 102
1 144 2 103
2 155 1 103
The newly generated column contains sequence numbers starting from 1 and the sequence should be resetted again to 1 whenever a new c3 value is encountered(for example when the c3 value changes from 101 to 102 the sequence should be resetted to 1).
Can anyone help me out on this regard.
Thanks in advance,
franky
View 3 Replies
View Related
Jan 16, 2008
consider i have these tables:
tbl_requests
id
description
owner
tbl_owners
id
name
tbl_RequestStatus
id
description
am looking for output look like this:
OwnerName New Completed
x 2 5
y 4 3
table requests holds number of requests where each request has an owner, table owners holds the owners names, table status holds values for a request status for example : new, in progress and completed, the query am looking for should show each owner with the number of request he/she is handling grouped by the status, so we can say that owner X has 2 new requests and 5 completed requests.
View 9 Replies
View Related
Apr 26, 2008
hi
i have a table with below structure
id no.of visit no of sales no of delivery.
I want all records to be selected with the following data also
average( no.of visit),average( no of sales ), average( no of delivery) in a single query ?
View 6 Replies
View Related
May 13, 2008
hi all,
i have to copy all records from a table to a new table by copying only 100 records at a time.how can i do this ....
thanks in advance.......
View 9 Replies
View Related
May 14, 2008
hi all
i have table which has a userid,email and other fields.
And i have a text file called email.txt,this text file has userid and email values corresponding to those in the table.And this file has only this userid and email fields separated by commas..
for example
1,jwalton@uswest.net
2,jeff@hmhr.com
3,james@hotmail.com
And i need to update the emailid field in table with the emailid in this text file.
ok tanx in advance...
View 6 Replies
View Related
May 20, 2008
hi all
I know a constraint's name,say cst_name .And i know which database it is existing,say db.then can i know which table belongs to this constraint in tat db with help of a query?
tanx in advance
View 2 Replies
View Related
Jun 5, 2008
Hi all,
I have a query which returns below result.
PID PName Quarter Value
1NewLookQ11000
1NewLookQ24200
1NewLookQ35400
1NewLookQ49000
2PepeQ13000
2PepeQ21200
2PepeQ34400
What I want - Another query on the above result which will return me the data as below without using temporary tables
PID PnameQ1Q2 Q3Q4
1NewLook1000420054009000
1Pepe300012004400 0
Please advise.
View 2 Replies
View Related
Jun 27, 2006
Hi i have table like below
SNONAMEMARKSRANK
----------------------------
1A56
2B35
3C77
4D86
5E35
6F77
7G63
8H42
9I51
Now i have to give ranks marks wise like this
SNONAMEMARKSRANK
----------------------------
1A565
2B358
3C772
4D861
5E358
6F772
7G634
8H427
9I516
in above table there is no 3rd and 9th Rank,because C,F shred the 2nd rank
and B and E shred the 8th rank
to generate this type of result some body help me
View 3 Replies
View Related
Feb 5, 2007
I have a table with the following columns
Id, title, year,dateedited with id being the primary key...
typically rows look like this
1 test 2000 1/1/2006
2 test2 2002 3/1/2006
3 test3 2004 4/1/2006
4 test4 2000 5/1/2006
how do i retrive the latest entry for each year as in something like this
4 test4 2000 5/1/2006
2 test2 2002 3/1/2006
3 test3 2004 4/1/2006
Please help me with the query
View 2 Replies
View Related
Aug 8, 2007
In the table below for Query3, I need to be able to extract the last time "each' RN_TEST_ID was tested
for each month. For example, for RN_TEST_IDs '1453' and '1420', the rows in the results set would look like this because they are the most recent records for that specific ID for each Month. Thank you, Thank you, Thank you!
8/1/2007 09:55:48 1453 Passed
8/2/2007 10:32:17 1420 Passed
7/3/2007 09:28:42 1453 Passed
Query3
RN_EXECUTION_DATE RN_EXECUTION_TIME RN_TEST_ID RN_STATUS
8/2/2007 11:14:51 1421 Passed
8/2/2007 10:32:17 1420 Passed
8/2/2007 09:30:28 1420 Failed
8/2/2007 09:29:20 1418 Passed
8/2/2007 09:18:45 1418 Failed
8/1/2007 16:06:22 1416 Failed
8/1/2007 14:19:56 1413 Passed
8/1/2007 14:19:44 1413 Failed
8/1/2007 14:19:32 1414 Passed
8/1/2007 09:55:48 1453 Passed
8/1/2007 09:36:52 1453 Failed
7/3/2007 09:28:42 1453 Passed
View 6 Replies
View Related