Help !!! None Of My Transaction Logs Are Getting Backed Up
Jan 19, 2001
Hi all,
I have set up a maintenance plan to backup my databases but when I view the maintenance plan history the transaction log backup steps have a success tick but a message saying :
"Backup can not be performed on this database. This sub task is ignored"
I have looked in my backup directory and only see *.BAK files and no *.TRN.
The transaction logs are supposed to back up at 1AM and the databases at 2AM
All my databases being backed up have the truncate log on checkpoint option set. Is this best practise according to my backup schedule ?
Help !!!!
Regards,
Tim
View 4 Replies
ADVERTISEMENT
Aug 17, 2006
Coming from a (mostly) Oracle shop, I am unclear how SS transaction logswork as far as up to point of failure recovery goes.I have the few MSSQL databases I look after in full recovery mode, and Iset up maintenance plans to back these up online on a daily basis. Inthe research I did it was recommended backing up the transaction logs aswell on a frequent basis to ensure recovery to POF or point in time.I had assumed that they work like Oracles archive logs, in that oncethey are full they are archived to disk in case they are needed, toduplex destinations if need be. Does SS do this, or do I need to bebacking up transaction logs on an hourly (or shorter) basis? In lookingat enterprise manager I see that it does not look like the transactionlogs are archived anywhere, but overwritten once filled up, similar toOracle noarchivelog mode, in that if you lose your online redo logs oranyone of them has recycled since your last backup, then you can onlyrecover to the last good backup.Is this a correct assumption? Should I be backing up transaction logshourly to make sure I can have PIT or POF recovery?thanksTG
View 3 Replies
View Related
Oct 4, 2007
Hello,
how can i view the content of a archived (backed up) transaction log?
DBCC LOG only works with online logs.
Thx for your answer
Best regards,
Stefan Ridinger
View 1 Replies
View Related
May 13, 2014
We use AlwaysOn availability groups, which has 2 SQL nodes configured (version: 11.0.3373.0), my full and differential backups are working for all my databases, however I am unable to perform any LOG backups.
I have double checked my Availability Group settings, and the backup preferences is set to: 'Prefer Secondary'
I've tried creating a maintenance job as well as using Ola Hallengren's maintenancescript job to back them up, but nothing is written to the drive. All jobs return successful every time, and take less then 3 seconds to run. There are no events being written in the SQL error log or event log.
View 2 Replies
View Related
Feb 24, 2015
I backed up my transaction log file using this:
BACKUP LOG iTest2_AELetters TO DISK = N'nul'(yes I know this breaks the log chain - it's expected in this intance)
But after I run it my t log is exact same size. I have refreshed many times.
I am using SQL Always On on this DB.
View 4 Replies
View Related
Jul 23, 2005
Hello All,The setting is SQL server 7, on Windows NT.If the distributor can not access the log on the publisher database ( butsubscribers are not deleted yet), will the full backup of the publisherdatabase truncate the transaction log? My guess is, it will not truncate thelog.Can any one confirm please?Thanks,Mokles
View 2 Replies
View Related
Apr 24, 2002
What is the best way to clear the transaction logs. My backup job each night is ending because it says it is running out of disk space and I need to clear up the transaction logs. Any help is appreciated. I see many different options (trucate option, auto shrink, etc.), just need some assistance tosome more specific best approaches. Thanks
View 3 Replies
View Related
Aug 13, 2001
Im having issues truncating my transaction logs. I have logs in excess of 40 gigs. All the info in the BOL is very vague. Any assistance would be apreciated.
Regards
SeTi Ni
View 5 Replies
View Related
Jun 22, 2000
When we backup the transaction log,will it truncate the log or it will grow from there?Truncate log on check point is desabled.
Thanks!
View 2 Replies
View Related
Aug 30, 2000
to take the transaction log back up regularly I should have truncate log on check point false. If I do so then how will I truncate the log.
regards,
Renu
View 3 Replies
View Related
Aug 20, 1998
I am trying to import records via bcp (about 1,500,000 records) and I keep running out of disk space. Is there any way to limit or do away with the transaction log (and still be able to import)?
View 2 Replies
View Related
Dec 14, 1999
how do i decrease the transaction log example 500mb to 100mb, can you help me with the syntax pls!!
View 1 Replies
View Related
Sep 2, 2004
I need to move transaction logs to a different drive and am looking for a way to do it without detaching the db.
Can I create a second transaction log file for the DB and then delete the original log file?
What is the best way to do this for db's that are being replicated?
Thanks,
Ken Nicholson
View 3 Replies
View Related
Jun 13, 2002
I need to seperate my SMS data files and transaction logs onto two seperate drives. Can anyone assist me with this?
thanks...
View 1 Replies
View Related
Aug 2, 2004
HELP!!!!
When I look at the Database maintience plan history entry for backup I have a message that reads: "Backup can not be performed on this database. This sub task is ignored".
Have anyone come across this error before?? As part of the Maintenance plan some transaction log are being backup and some aren't instead they receive the message above.
Thanks
Lystra
View 2 Replies
View Related
Nov 19, 2004
Has anyone ever had the problem of the IT department not backing up thier transaction logs simply because they didnt find it necessary??
View 3 Replies
View Related
Jan 8, 2004
i have several sql servers doing maintenance plans and backing up the transaction logs to tape. unfortunately it seems that the server keeps adding the transaction logs to the same tape, without overwriting them. Nowadays a transaction log backup to disk takes 2 minutes but when done to tape it is taking up 1hr54minutes. What can i do so that the tape is automatically initialised without having to do it manually... Thanks
View 1 Replies
View Related
Apr 9, 2008
i was wondering if smeone could give me a breif over view how far back do these go
View 12 Replies
View Related
Jun 11, 2008
HI All,
Is this is a good idea or not?
If i attached my SQL Server to SAN only for DATA and LOG (Ldf) drives
through the FC. then we put *.bak and *.trn on to local disk RAID 1 drive?
Any performance isues?
View 3 Replies
View Related
Dec 7, 2007
Is there a way to view the transactions from a .TRN transaction log file? If so can I overwrite some of the transactions on the file and then restore from it? I am just curious.
View 2 Replies
View Related
Mar 11, 2007
Hi, I know just about nothing about SQL Server. I am getting this error:The log file for database 'my_database' is full. Back up the transaction logfor the database to free up some log space.I can't access the transaction logs to back them up. I am told that my ISP'stech support should have it set up to shrink those logs automatically everyso often. Is that true?Why are they needed? Up till Monday, the logs are just of our getting SQLServer set up, so couldn't the logs just be deleted? Most of my site can'trun with this problem.I'd appreciate any enlightenment anyone can give me!Thanks, Jill
View 1 Replies
View Related
Jul 20, 2005
This seems like it'd be a really stupid question, but for the life of me Ihaven't been able to find an answer that works....I have a database that's approximately 400MB when shrunk... and thetransaction logs are at about 4.8GB when shrunk... I can't seem to get thetransaction log any smaller, no what I try. How can I get the log downbelow 1GB and keep it there? I've only got an 18GB hard drive and I need torun 2 copies of this database.-steve
View 4 Replies
View Related
Jan 8, 2008
Hello,
I am trying to figure out the time a certain store procedure was executed. I know the SP's name and approximetly the time it was executed. Is this possible to do?
Honestly, i am not sure if SQL server 2005 is smart enough to keep track of commited transaction on the server.
Any suggestins?
Thanks
View 2 Replies
View Related
Jun 5, 2002
I have seen quite a few people post this type of problem, but I am finding few solutions. Your advice and/or experiences are greatly appreciated.
Here's my scenario:
Environment: Windows NT 4.0 SP 6, SQL 7.0 (set up for Transactional Replication)
Problem: We have several remote dB machines configured for full recovery. On these machines are several dB's that are capturing aprox. 280 data points per second per unit. (Each dB represents one unit, and we have 21 units) No problem here. The problem is the transaction logs, that obviously grow profusely, will not SHRINK after, backups, dbcc commands and TSQL has been issued in failed attempts to shrink the logs. (in other words we've tried everything)
My questions are:
1. Because we are replicating, is it absolutely necessary to configure dB's for FULL recovery? How do I check in 7.0 if the dB is certainly in FULL vs. SIMPLE recovery mode?
2. I work with SQL 2000 and shrinking files is no problem. How can we shrink these log files in SQL 7.0?
It is rather urgent I find a solution as we are running out of hard drive space on our remote machines. Please help :-(
Christine
View 1 Replies
View Related
Jun 7, 2001
I am having trouble Truncating a Transaction Log. I`ve tried everything in Book Online.
I`ve backed up the database, I`ve tried DBCC SHRINKFILE, DBCC SHRINKDATABASE, BACKUP LOG TRUNCATE_ONLY ...etc, but it will not shrink. Any suggestions ? Thanks.
View 1 Replies
View Related
May 4, 2000
Currently, my databases and their corresponding transaction logs are all on the same disk array. I finally was able to acquire a seperate disk, specifically to seperate the logs, in case of failure, etc.
Now, I need to figure out how to go about moving the tansaction logs off the current disk array and on to the new disk.
In Enterprise Manager, I brought up "Properties" for the first database, and went to the "Transaction Log" tab. Clicked on the "browse" or "..." button in the location field and got the following message:
"A transaction log file's physical name cannot be changed once the transaction log file has been created". :(
I have been looking through Books On Line, but have been unable to find anything helpful yet.
Can anyone help me figure out how to go about moving a transaction log's location? There has to be some way.
Even if it involves shutting down the server, altering system tables, etc. I need to get these moved.
Your help is appreciated. Thanks.
View 2 Replies
View Related
Jun 15, 2000
Is it possible to move .ldf's to another drive. For example I would like to move a database transaction log file from C:mssql7data to D:mssql7logs.
How can this be done?
TIA!
JJ
View 1 Replies
View Related
Aug 28, 2000
Hi all,
I am restoring database from Transaction Logs. I followed all the steps
mentioned in the book. Just before the last step there are three options
1. Leave Database Operational. No Additional Logs can be Restored.
2. Leave Database Nonoperational But Able to Restore Additional
Transaction Logs.
3. Leave Database Read_Only And Able To Restore Additional Transaction Logs.
Option 2 and 3 aresupposed to set on the NORECOVERY flag.
I tried both options 2, and 3 , But still got messages that I did not
specify WITH NORECOVERY or WITH STANDBY.
Can anyone please tell me what I am doing wrong?
Thanks in Advance.
Attaullah
View 2 Replies
View Related
Jul 11, 2000
I am currently having a problem with a transaction log not emptying even when backed up and truncated. I have done a full database backup and then a transaction log backup expecting this to flush the log however the log is not emptied and it is growing larger and larger. Even when I truncate the log it still doesn't free any space up. Can anybody out there spot the fundemental error in my working??? most grateful. Andy (SQL allegedly)
View 1 Replies
View Related
May 24, 2003
I am new to sql2k
previously i used to work with sql7
how do i clear the transaction logs in sql2k
pavan
View 2 Replies
View Related
Aug 20, 1999
I have a transaction log with 22mb of used space and 2,632.50MB of free space. I tried using the following statement to shrink the log and it did not do anything:
USE DB
GO
DBCC SHRINKFILE (DB_log, 50)
GO
CHECKPOINT
Can anybody help me understand what is going on here?
View 1 Replies
View Related
Aug 11, 1999
I have a MS SQL Server 6.5/SP5A database running on NT 4.0/SP4 Enterprise Edition with MS Cluster Server. On my Production box, I dump the transaction logs every 30 minutes. I need to recreate a point in time on a separate TEST box with the same hardware/software. I created a "DBA database" from a previous night of Production - no problem. However, when I start applying the transaction logs, it complains about being out of sequence. The timestamps that it is reporting are accurate for the transaction logs, but it is basically using the database load time to compare it with. (Granted I am moving from one box to another, but I didn't think this would be a problem). I created a "DBA database" on Production, went through the same steps, and it takes the database load and the transaction logs. I am assuming that the sequence numbers on the transaction logs are identified internally on the file, not per server? Ideas as to why it would complain on an out of sequence condition (Error 4305) when I move to a different box?
View 2 Replies
View Related
Aug 31, 2001
when i try to delete the records it gives the errror
suggest me how to deal with this problem
=====
Msg 1105, Level 17, State 2
Can't allocate space for object 'Syslogs' in database
'armaster' because the 'logsegment' segment is full. If you ran out of
space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE
or sp_extendsegment to increase the size of the segment.
View 1 Replies
View Related
