Help On Store Proc CURSOR
Aug 28, 2007
---Master query (Assuming this will display 20 rows) we are dealing with one single table that we need to pivot.
select id,fname,lname,sponsor from masterfile where id='TARZAN'
---from those 20 rows there is id that sponsored some one else
---explain: assuming ID=SHAGGY FNAME=Shaggy LNAME=Scooby (was sponsored by Tarzan)
---but Shaggy has sponsored 2 others
select id,fname,lname,sponsor from masterfile where id='SHAGGY'
---will display 3 rows and if from one of those 3 others that belongs to shaggy
---I also want to get their information ID,fname,lname
---This can go up to 10 per saying is like building a Tree with branches and leaves under those branches
---Explain:
---Let's assume that we have an OAK Tree that has 4 main branches
---and out of those 4 main branches 2 of them have other branches with leaves under it
--I would like to do this process in a cursor (Store Proc) is possible
--the way I have it now taking way too long
--because in within so many (do while loop)
TIA
Please pardon me, I could not find better layout to explain this.
View 4 Replies
ADVERTISEMENT
Sep 6, 2000
Hello.
I'm having a perfectly(!) normal stored procedure that returns a Resultset with one row (containing an ID I want).
Not I need that ID in another stored procedure and I can't get it out from the stored procedure.
exec @blabla = MyProc -- works well if I use return
exec MyProc @blabla -- works using OUTPUT keyword
But neither of these examples works with a CURSOR as the @blabla.
Do I need to specificly pass a cursor as a return value, wich would give me bellyache, or can I do something like this:
DECLARE @MyCursor CURSOR
SET @MyCursor = CURSOR FOR exec MyProc
Thanks for any help!
Daniel Ronnqvist, Stockholm
View 2 Replies
View Related
Apr 25, 2002
Can I do something like
CREATE PROCEDURE ProcA
AS
DECLARE @temp CURSOR
BEGIN
EXECUTE ProcB @temp OUT
END
GO
I am sure that this code is not right. But, if someone can tell me a better way to solve this, I would apprciate it.
AB
View 1 Replies
View Related
Feb 19, 2005
Has anyone ever tried to use a cursor as an output variable to a stored proc ?
I have the following stored proc - CREATE PROCEDURE dbo.myStoredProc
@parentId integer,
@outputCursor CURSOR VARYING OUTPUT
AS
BEGIN TRAN T1
DECLARE parent_cursor CURSOR STATIC
FOR
SELECT parentTable.childId, parentTable. parentValue
FROM parentTable
WHERE parentTable.parentId = @parentId
OPEN parent_cursor
SET @outputCursor = parent_cursor
DECLARE @childId int
DECLARE @parentValue varchar(50)
FETCH NEXT FROM parent_cursor INTO @childId, @parentValue
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT childTable.childValue
FROM childTable
WHERE childTable.childId = @childId
FETCH NEXT FROM parent_cursor INTO @childId, @parentValue
END
CLOSE parent_cursor
DEALLOCATE parent_cursor
COMMIT TRAN T1
GOAnd, I found that I had to use a cursor as an output variable because, although the stored proc returns a separate result set for each returned row in the first SQL statement, it did not return the result set for the first SQL statement itself.
My real problem at the moment though is that I can't figure a way to get at this output variable with VB.NET.Dim da as New SqlDataAdapter()
da.SelectCommand = New SqlCommand("myStoredProc", conn)
da.SelectCommand.CommandType = CommandType.StoredProcedure
Dim paramParentId as SqlParameter = da.SelectCommand.Parameters.Add("@parentId", SqlDbType.Int)
paramParentId.Value = 1
Dim paramCursor as SqlParameter = daThread.SelectCommand.Parameters.Add("@outputCursor")
paramCursor.Direction = ParameterDirection.OutputThere is no SqlDataType for cursor. I tried without specifying a data type but it didn't work. Any ideas?
Thanks
Martin
View 6 Replies
View Related
Sep 10, 2001
I have a stored Procedure that is looping through multiple cursors.
It is never finding any records in any curosr that is using a local variable in the where clause...Help
Alter Procedure ProjectedIncome
As
SET ROWCOUNT 0
Declare
-- Date types
@startdate smalldatetime
,@enddate smalldatetime
,@ProjectedDate smalldatetime
,@termination smalldatetime
,@effectivedate smalldatetime
-- Integer
,@Nums int
,@nums2 int
,@ClientId int
,@AssetId int
,@ProductID int
,@Policies int
,@product int
,@Per int
,@Projected int
-- String
,@debugtext varchar(150)
,@productid2 varchar(15)
-- float
,@rate float
,@Cap float
--bit
,@Override bit
--Money
,@AnnualPremium Money
,@Value Money
,@Premium Money
,@PaymentAmount Money
--Doubles
,@PremCalc int
,@HoldPrem int
,@HoldCom int
,@CumBal int
,@CumPrem int
,@MonthlyPrem int
,@XBal int
,@CapPrev int
,@PremTier int
,@Incriment int
--Declare cursor for System Variables
DECLARE SystemVar_cur cursor for
SELECT ProjectionStartDate,ProjectionEndDate from SystemVariables
--Declare the Cursor for Asset Definitions
declare AssetDef_cur cursor for
SELECT termination,effectivedate,ClientID,AnnualPremium,A ssetID,ProductID,Policies from AssetDefinitions
--Declare cursor for CommisionDefinitions
declare CommisionDef_cur cursor for
Select a.product,a.per,a.cap,a.rate,a.value from CommisionDefinitions a where a.product = @ProductId2;
--Declare cursor for projections
declare projections_cur cursor for
Select a.override,a.premium,a.paymentamount from projections a where a.date = @ProjectedDate and assetid = @AssetId;
-- Select from the SystemVariables Table
OPEN SystemVar_cur
FETCH SystemVar_cur INTO @startdate,@enddate
CLOSE SystemVar_cur
DEALLOCATE SystemVar_cur
-- Open the AssetDefinition File and loop through
--
INSERT INTO debug_table VALUES('Open the Asset Cursor')
Open AssetDef_cur
Fetch AssetDef_cur INTO
@termination
,@effectivedate
,@clientId
,@AnnualPremium
,@assetId
,@ProductId
,@Policies
While @@fetch_status = 0
Begin-- begin AssetDefinitions Loop
--If Asset is not Terminated
If @termination IS NULL
BEGIN-- begin @termination IS NULL
SET @MonthlyPrem = (@AnnualPremium/12)
SET @debugtext = 'MonthlyPrem = AnnualPrem' + CAST(@AnnualPremium as Char) + '/12'
INSERT INTO debug_table VALUES(@debugtext)
If @effectivedate > @startdate
SET @ProjectedDate = @effectivedate
Else
SET @ProjectedDate = @startdate
-- end if
SET @PremCalc = 0
SET @CumBal = 0
SET @XBal = 0
SET @HoldCom = 0
-- Fetch the Projection Record
open projections_cur
fetch projections_cur INTO
@override,@premium,@paymentamount
If @@fetch_status = 0
BEGIN
IF @override = 1
BEGIN-- begin @override = 1
SET @CumPrem = @premium
SET @CumBal = @paymentamount
SET @HoldPrem = @CumPrem
SET @HoldCom = @CumBal
END-- end @override = 1
Else
SET @HoldPrem = @MonthlyPrem
END
CLOSE projections_cur
While @ProjectedDate <= @enddate
BEGIN-- begin While @ProjectedDate <= @enddate
SET @CapPrev = 0 --reset cap balance
SET @XBal = 0
SET @debugtext = 'Begin Get Commision Record For Product' + CAST(@productID as CHAR)
INSERT INTO debug_table VALUES(@debugtext)
SET @productid2 = @productid
SET @PremTier = @HoldPrem
---NOW Open the CommisionDef table
OPEN CommisionDef_cur
FETCH CommisionDef_cur INTO
@product,@per,@cap,@rate,@value
IF @@fetch_status <> 0
BEGIN
SET @debugtext = 'ERROR? ' + CAST(@@error as Char)
INSERT INTO debug_table VALUES(@debugtext)
END
WHILE @@fetch_status = 0
BEGIN-- begin While CommisionDef Fetch = 0
SET @debugtext = 'Found Commision Record' + CAST(@product as Char)
INSERT INTO debug_table VALUES(@debugtext)
If @Per = 0
BEGIN-- begin If @Per = 0
SET @Incriment = @Cap - @CapPrev
If @PremTier > @Incriment
SET @XBal = @XBal + (@Incriment * @Rate)
Else
BEGIN-- begin @PremTier > @Incriment
If @PremTier >= 0
SET @XBal = @XBal + (@PremTier * @Rate)
END-- end @PremTier > @Incriment
SET @debugtext = 'XBal ' + CAST(@XBal as CHAR(10))
INSERT INTO debug_table VALUES(@debugtext)
SET @CapPrev = @Cap
SET @PremTier = @PremTier - @Incriment
END-- end If @Per = 0
Else
BEGIN-- begin If @Per <> 0
SET @XBal = @value * @Policies / 12
SET @HoldCom = 0
SET @PremCalc = 0
SET @CumBal = @XBal
SET @debugtext = 'CumBal' + CAST(@CumBal as Char)
INSERT INTO debug_table VALUES(@debugtext)
SET @HoldPrem = @Policies
END-- end If @Per <> 0
FETCH CommisionDef_cur INTO
@product,@per,@cap,@rate,@value
END-- end While CommisionDef Fetch = 0
CLOSE commisionDef_cur
-- Fetch the Projection Record
open projections_cur
fetch projections_cur INTO
@override,@premium,@paymentamount
IF @@fetch_status = 0
BEGIN -- begin Projection Fetch = 0
IF @override = 1
SET @HoldCom = @CumBal
ELSE
-- If not overridden, set the fields to Update the projection File
BEGIN-- begin @override <> 1
SET @Projected = ((@XBal - @HoldCom) * 100 + 0.5) / 100
SET @Premium = @HoldPrem - @PremCalc
UPDATE projections SET projected = @projected, premium = @Premium where assetid=@AssetID and date = @ProjectedDate
SET @HoldCom = @XBal
END-- end @override <> 1
END-- end Projection Fetch = 0
ELSE
BEGIN -- Begin Projection Fetch else
IF @@fetch_status = -1
BEGIN-- begin Projection Fetch = -1
SET @Projected = ((@XBal - @HoldCom) * 100 + 0.5) / 100
SET @Premium = @HoldPrem - @PremCalc
SET @debugtext = '((xbal - holdcom)*100 + 0.5)/100 ' + CAST(@Xbal as char) + ' , ' + CAST(@holdcom as CHAR)
INSERT INTO debug_table VALUES(@debugtext)
SET @debugtext = 'Projection Record Not Found so Write it'
INSERT INTO debug_table VALUES(@debugtext)
--Projection record was not found so write it
SET @override = 0
INSERT INTO Projections
(AssetId,Date,Premium,Projected,Override,Payment,P aymentAmount)
VALUES(@AssetId,@ProjectedDate,@Premium,@Projected ,@override,0,0)
SET @HoldCom = @XBal
END-- end Projection Fetch = -1
END -- end Projection Fetch else
CLOSE projections_cur
SET @ProjectedDate = DateAdd("m", 1, @ProjectedDate)
SET @PremCalc = @HoldPrem
-- Fetch the Projection Record
OPEN projections_cur
FETCH projections_cur INTO
@override,@premium,@paymentamount
IF @override = 1
BEGIN-- begin @override = 1
SET @CumBal = @paymentamount
SET @HoldPrem = @HoldPrem + @CumPrem
END -- end @override = 1
ELSE
SET @HoldPrem = @HoldPrem + @MonthlyPrem
CLOSE projections_cur
END-- End the While ProjectedDate <=@enddate
END --End the If Termination is NULL
Fetch AssetDef_cur INTO
@termination
,@effectivedate
,@clientId
,@AnnualPremium
,@assetId
,@ProductId
,@Policies
END
CLOSE AssetDef_cur
DEALLOCATE AssetDef_cur
DEALLOCATE projections_cur
DEALLOCATE CommisionDef_cur
return
View 1 Replies
View Related
May 26, 2015
I have to modify a stored procedure that is written by someone else.Basically the stored prcoedure uses a cursor to fetch the data from the table and then insert that data in another table. While fetching the code form another table, it also gets some distinct columns from another table Below is my code:
Declare data_cursor cursor for
Select emp_no, emp_name, event_date, Test_no, Code, Test_result
From test_table1
order by emp_no
[code]...
The reason, I have to modify the above stored proc because now because of application changes, I am getting around 50 distinct userID from test_table1 so the above subquery(SELECT @ProcessName = (select distinct userID from test_table1) won't work. How can I loop through the above stored proc so that each @ProcessName can get inserted in table TESTTable2 so in other words
I want to pass each userId one at a time and insert it in table test_table1 and other subsequent tables. I can declare another cursor to accomplish this, but I was wondering if there is any better way to rewrite this stored proc and not use the cursor at all.because of my application changes all these three statements above are throwing the error:
SELECT @ProcessName = (select distinct userID from test_table1)
SELECT @FileProcess = 'EW' + @ProcessName
Select @TestProcess = (Select distinct userID from testTable1) + 'TXT'
View 8 Replies
View Related
May 4, 2007
I need some help writing my request, I tried both of the following but it does'st seem to work. Your sugestion would be appreciated.SELECT count(LeadId) FROM dbo.Cl_Leads Where AccntMng=@AccntMng and (Status = 'Won' or Status = 'Lost') and InsertDate BETWEEN @dtStart AND @dtEnd
I also tried
SELECT count(LeadId) FROM (SELECT * FROM dbo.Cl_Leads WHERE InsertDate BETWEEN @dtStart AND @dtEnd)Where AccntMng=@AccntMng and (Status = 'Won' or Status = 'Lost') This return and error: Incorrect syntax near the keyword 'Where'.
View 6 Replies
View Related
Jan 7, 2005
I am doing an insert and I get the error "Cast from type 'DBNull' to type 'Integer' is not valid." if the contact name already exist.
I dont see my error so if someone could enlight me I would appreciate.
Thanks
"****************STORE PROC***********************
ALTER procedure dbo.Add_Cl_Contact
(
@ContactNamenvarchar(75),
@Departmentnvarchar (50)=null,
@Titlenvarchar(50)=null,
@Phone1char(20)=null,
@Phone2char(20)=null,
@Phone3char(20)=null,
@Ext1char(10)=null,
@Ext2char(10)=null,
@Ext3char(10)=null,
@Faxnvarchar(50)=null,
@Emailnvarchar(50)=null,
@ContactTypeIDint=null,
@Resultinteger OUTPUT
AS
if Exists
(
Select *
From Cl_Contacts
Where ContactName = @ContactName
)
Return 1
Else
insert into Cl_Contacts (
ContactName,
Department,
Title,
Phone1,
Phone2,
Phone3,
Ext1,
Ext2,
Ext3,
Fax,
ContactTypeID,
Email
)
values (
@ContactName,
@Department,
@Title,
@Phone1,
@Phone2,
@Phone3,
@Ext1,
@Ext2,
@Ext3,
@Fax,
@ContactTypeID,
@Email
)
Select @Result = SCOPE_IDENTITY()
return 0
"****************END STORE PROC***********************
'******************************************************************
'******************************************************************
Public Function Add_Cl_Contact(ByVal strContactName As String, _
ByVal strDep As String, ByVal strEmail As String, ByVal strExt1 As String, ByVal strExt2 As String, _
ByVal strExt3 As String, ByVal strFax As String, ByVal strPhone1 As String, ByVal strPhone2 As String, _
ByVal strPhone3 As String, ByVal strTitle As String, ByVal iContactTypeId As Integer, _
ByRef iResult As Integer, ByRef strError As String) As Boolean
'******************************************************************
Dim bSuccess As Boolean = True
Dim connect As New SqlConnection(strConnection)
Dim cmdSelect As New SqlCommand("Add_Cl_Contact", connect)
Dim paramReturnValue As SqlParameter
cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
cmdSelect.Parameters.Add("@ContactName", strContactName)
cmdSelect.Parameters.Add("@Department", strDep)
cmdSelect.Parameters.Add("@Title", strTitle)
cmdSelect.Parameters.Add("@Phone1", strPhone1)
cmdSelect.Parameters.Add("@Phone2", strPhone2)
cmdSelect.Parameters.Add("@Phone3", strPhone3)
cmdSelect.Parameters.Add("@Ext1", strExt1)
cmdSelect.Parameters.Add("@Ext2", strExt2)
cmdSelect.Parameters.Add("@Ext3", strExt3)
cmdSelect.Parameters.Add("@Fax", strFax)
cmdSelect.Parameters.Add("@Email", strEmail)
cmdSelect.Parameters.Add("@ContactTypeID", iContactTypeId)
paramReturnValue = cmdSelect.Parameters.Add("@Result", SqlDbType.Int)
paramReturnValue.Direction = ParameterDirection.Output
paramReturnValue = cmdSelect.Parameters.Add("ReturnValue", SqlDbType.Int)
paramReturnValue.Direction = ParameterDirection.ReturnValue
Try
connect.Open()
cmdSelect.ExecuteNonQuery()
iResult = cmdSelect.Parameters("@Result").Value
connect.Close()
If cmdSelect.Parameters("ReturnValue").Value = 0 Then
strError = "Contact has been added"
Else
strError = strContactName & " already exist!"
bSuccess = False
End If
Catch ex As Exception
bSuccess = False
strError = ex.Message
Finally
If connect.State = ConnectionState.Open Then
connect.Close()
End If
End Try
Return bSuccess
End Function
View 3 Replies
View Related
Jun 29, 2005
For a reason that I dont see my store proc is always
returning 0 records but if I use a commandType.text instead of
StoredProcedure then I get my results. So I must have some kind
of error somewhere.
Store Proc
ALTER PROCEDURE dbo.Get_Cl_IssuesBySystemID
@SystemId nvarchar(255)
AS
SET NOCOUNT ON
SELECT t1.issueId, t1.IssueTitle,t1.DateCreated,t2.CustomFieldValue
FROM dbo.IssueTracker_Issues t1
LEFT OUTER JOIN dbo.IssueTracker_ProjectCustomFieldValues t2
ON t1.IssueId = t2.IssueId
Where t2.CustomFieldId=5 and t2.CustomFieldValue like '%@SystemId%'
order by t1.DateCreated
SET NOCOUNT OFF
Function
Public Function Get_Cl_IssuesBySystemID(ByVal strSystemId As String) As DataView
Dim objDs As New DataSet
Dim objDv As New DataView
Dim connect As New SqlConnection(strConnection)
'***For CommanType.Text***
Dim strSelect As String
strSelect = "SELECT t1.issueId, t1.IssueTitle,t1.DateCreated,t2.CustomFieldValue" & _
" FROM dbo.IssueTracker_Issues t1" & _
" LEFT OUTER JOIN dbo.IssueTracker_ProjectCustomFieldValues t2" & _
" ON t1.IssueId = t2.IssueId" & _
" Where t2.CustomFieldId=5 and t2.CustomFieldValue like '%" &
strSystemId & "%'" & _
" order by t1.DateCreated"
Dim cmdSelect As New SqlCommand(strSelect, connect)
cmdSelect.CommandType = CommandType.Text
'***End For CommanType.Text***
'***For CommanType.StoredProcedure***
'Dim cmdSelect As New SqlCommand("Get_Cl_IssuesBySystemID", connect)
'cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
'cmdSelect.Parameters.Add("@SystemId", strSystemId)
'***End For CommanType.StoredProcedure***
Dim objAdapter As New SqlDataAdapter(cmdSelect)
Try
objAdapter.Fill(objDs)
objDv = objDs.Tables(0).DefaultView
Catch objErr As Exception
Throw New Exception(objErr.Message)
End Try
Return objDv
End Function
View 2 Replies
View Related
May 21, 2008
the storeproc gives out put one data with one column as Day 25 or 50 as a column in a table. if the condition
inside the storeproc matches otherwise the column it returns will not have any value i.e null..i am trying to run
this query to get some boolean output . Is it valid to run store proc in while exists case. here is the query
SELECT CASE
WHEN EXISTS (EXEC dbo.sp_CheckingLobValue
@varfilename = N'Customers.xml')
BEGIN
'YES'
ELSE
'NO'
END
can any one has any solution to it.
thanks in regards.
View 5 Replies
View Related
Mar 20, 2008
Following sp gives wrong result whats wrong with following cursor?
ALTER PROCEDURE [dbo].[spPMPT_GetProjectBenefitDetailsForAssess]
@ProjectBenefitID INT
AS
SET NOCOUNT ON
DECLARE @ErrorMsgID INT
DECLARE@ErrorMsg VARCHAR(200)
DECLARE @TEMP_BENEFIT
TABLE (ActualQuantity INT,
ExpectedQuantity INT,
ActualQulity VARCHAR(2000),
ExpectedQulity VARCHAR(2000) )
DECLARE @AssessBenefitID INT
DECLARE @ActualQuantity INT
DECLARE @ExpectedQuantity INT
DECLARE @ActualQuality VARCHAR(2000)
DECLARE @ExpectedQuality VARCHAR(2000)
DECLARE @AssessFlag CHAR
DECLARE CUR_BENEFIT CURSOR FOR
SELECT AssessBenefitID,ProjectBenefitID,AssessFlag FROM PMPT_AssessBenefit WHERE ProjectBenefitID=@ProjectBenefitID
OPEN CUR_BENEFIT
FETCH NEXT FROM CUR_BENEFIT INTO @AssessBenefitID,@ProjectBenefitID,@AssessFlag
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @ActualQuantity=Quantity FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='A' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
SELECT @ExpectedQuantity=Quantity FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='E' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
SELECT @ActualQuality=Quality FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='A' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
SELECT @ExpectedQuality=Quality FROM dbo.PMPT_AssessBenefit WHERE AssessFlag='E' AND AssessBenefitID=@AssessBenefitID AND ProjectBenefitID=@ProjectBenefitID
INSERT INTO @TEMP_BENEFIT (ActualQuantity ,
ExpectedQuantity ,
ActualQulity ,
ExpectedQulity )VALUES(@ActualQuantity,@ExpectedQuantity,@ActualQuality,@ExpectedQuality)
FETCH NEXT FROM CUR_BENEFIT INTO @AssessBenefitID,@ProjectBenefitID,@AssessFlag
END
CLOSE CUR_BENEFIT
DEALLOCATE CUR_BENEFIT
SELECT * FROM @TEMP_BENEFIT
View 3 Replies
View Related
Apr 14, 2015
I have a table that has the following data
ID
---
101
102
105
108
124
189
I need to call a stored proc for each of the IDs above. Our existing code which has a cursor to loop through the table and call the proc for each value is proving to be a performance nightmare. Is there an alternate method that I can use to avoid cursor and make it more efficient?
View 2 Replies
View Related
Aug 15, 2006
Existing Stored Procedure, has been running well on SQL since 7.0.(but needed some tweaking to migrate to 2000).Now all of a sudden after installing SP4 of SQL 2000,this process slows down, and SQL Spotlight shows the number of locksjust climbing throughout the processing run.According to the MS Knowledge Base Articles on KeyLocks .. this was aproblem that was *fixed* in the service pack ... where as for me it isnow broken.Article ID: 260652PRB: Nested Loop Join That Uses A "BOOKMARK LOOKUP ...WITH PREFETCH"May Hold Locks Longer http://support.microsoft.com/kb/260652/Article ID: 828096FIX: Key Locks Are Held Until the End of the Statement for Rows ThatDo Not Pass Filter Criteria http://support.microsoft.com/kb/828096/Anybody else have this issue, or have any "eazy" solutions?The proc cursors thru a list and runs a proc on each item in the "worklist".This is an existing systemwith no plans to turn the process into a set oriented one,as is going away shortly.
View 4 Replies
View Related
Jul 20, 2005
In SQL how can a cursor be opened to iterate the result set returnedfrom a stored proc-Rahul SoodJoin Bytes!
View 1 Replies
View Related
Aug 3, 2006
Can someone help me with debugging store proc. I am usig VS 2003 and SQL Server 2005 and I have no clue as how to do that if it is possible. I would like to place a break point in my store proc if that is possible. I know if I was in VS 2005 it would be a charm but it's not my case.
Thanks
View 3 Replies
View Related
Aug 9, 2004
I am trying to do an insert with a SPand I get the following error: "The name 'A2LA Website' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted."
When iParentID=30 and strTexte="A2LA Website"
What an I doing wrong?
Table:
ID int(identity)
ParentID int
Text nvarchar(50)
Valeur nvarchar(50) Allow Null
Ordre int Allow Nulls
Public Sub addItemToDdSelection(ByVal strTable As String, ByVal iParentID As Int16, ByVal strTexte As String)
Dim connect As New SqlConnection(strConnection)
Dim cmdSelect As New SqlCommand("AddDropDownContent", connect)
Dim paramReturnValue As SqlParameter
Dim strError As String
cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
cmdSelect.Parameters.Add("@intParentID", iParentID)
cmdSelect.Parameters.Add("@strTexte", strTexte)
Try
connect.Open()
cmdSelect.ExecuteNonQuery()
connect.Close()
Catch ex As Exception
strError = ex.Message
Finally
If connect.State = ConnectionState.Open Then
connect.Close()
End If
End Try
End Sub
ALTER PROCEDURE dbo.AddDropDownContent
(
@intParentID int,
@strTexte varchar(50)
)
AS
EXEC ('INSERT INTO DropDownMenus (ParentID, Texte) VALUES(' + @intParentID + ',"' + @strTexte + '")')
View 3 Replies
View Related
May 17, 2006
I have the following store proc and was wondering if I can optimized it by using a SELECT CASE instead of all those IF? I tried but don't know how to write it.
Thanks set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[Get_Cl_SearchMultiColumn]
(
@strSearchTermColumnNamenvarchar (50),
@strSearchTermSearchTermnvarchar (200)
)
as
if (@strSearchTermColumnName = 'Monitor')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Monitor1,Monitor2
FROM Cl_Systems
WHERE contains(Monitor1,@strSearchTerm) or contains(Monitor2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'MonitorSerial')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Monitor1Serial,Monitor2Serial
FROM Cl_Systems
WHERE contains(Monitor1Serial,@strSearchTerm) or contains(Monitor2Serial,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Microscope')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Microscope1,Microscope2
FROM Cl_Systems
WHERE contains(Microscope1,@strSearchTerm) or contains(Microscope2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'SerialMicroscope')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,SerialMicroscope1,SerialMicroscope2
FROM Cl_Systems
WHERE contains(SerialMicroscope1,@strSearchTerm) or contains(SerialMicroscope2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Controller')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Controller1,Controller2
FROM Cl_Systems
WHERE contains(Controller1,@strSearchTerm) or contains(Controller2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'ControllerFirmware')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Cont1Firmware,Cont2Firmware
FROM Cl_Systems
WHERE contains(Cont1Firmware,@strSearchTerm) or contains(Cont2Firmware,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'SerialController')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,SerialController1,SerialController2
FROM Cl_Systems
WHERE contains(SerialController1,@strSearchTerm) or contains(SerialController2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Joystick')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Joystick1,Joystick2
FROM Cl_Systems
WHERE contains(Joystick1,@strSearchTerm) or contains(Joystick2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'JoystickFirmware')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Joy1Firmware,Joy2Firmware
FROM Cl_Systems
WHERE contains(Joy1Firmware,@strSearchTerm) or contains(Joy2Firmware,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'SerialJoystick')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,SerialJoystick1,SerialJoystick2
FROM Cl_Systems
WHERE contains(SerialJoystick1,@strSearchTerm) or contains(SerialJoystick2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Camera')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Camera1,Camera2,Camera3,Camera4
FROM Cl_Systems
WHERE contains(Camera1,@strSearchTerm) or contains(Camera2,@strSearchTerm) or contains(Camera3,@strSearchTerm) or contains(Camera4,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'CameraSerial')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Camera1Serial,Camera2Serial,Camera3Serial,Camera4Serial
FROM Cl_Systems
WHERE contains(Camera1Serial,@strSearchTerm) or contains(Camera2Serial,@strSearchTerm) or contains(Camera3Serial,@strSearchTerm) or contains(Camera4Serial,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'ZMotor')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,ZMotor1,ZMotor2,ZMotor3
FROM Cl_Systems
WHERE contains(ZMotor1,@strSearchTerm) or contains(ZMotor2,@strSearchTerm) or contains(ZMotor3,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Stage')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Stage1,Stage2,Stage3
FROM Cl_Systems
WHERE contains(Stage1,@strSearchTerm) or contains(Stage2,@strSearchTerm) or contains(Stage3,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Lens')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Lens1,Lens2,Lens3
FROM Cl_Systems
WHERE contains(Lens1,@strSearchTerm) or contains(Lens2,@strSearchTerm) or contains(Lens3,@strSearchTerm)
return 0
end
View 4 Replies
View Related
Mar 19, 2002
Hello everyone,
I am trying to code a store procedure using nested cursor and I don't know where I am doing wrong.
I am getting message:
Server: Msg 170, Level 15, State 1, Procedure sp_alicare_99, Line 212
Line 212: Incorrect syntax near 'first_cursor'.
Can someone please help me with this, it's very urgent and I have to use it for production purposes.
Here is the store proc:
-- 05/24/2000 V1.0
-- populate Los Table
print 'sp_alicare_99'
go
if exists(select name
from sysobjects
where name='sp_alicare_99'
and type='P')
drop procedure sp_alicare_99
go
CREATE PROC sp_alicare_99
As
Begin
/**********
* sp_alicare_99 (V603.132)
***********/
set nocount on
declare
@diagnosis_code char(6) -- patient diagnostic code
,@age_group char(1) -- patient age_group
,@diagnosis_procedure char(1) -- patient diagnosis_procedure
,@category_code char(1) -- patient category_code
,@regioncode char(1) -- patient regioncode
,@sum_level char(1) -- patient sum_level
,@total_pts char(8) -- patient total_pts
,@average_stay char(3) -- patient average_stay
,@variance char(3) -- variance
,@pct10 char(2) -- pct10
,@pct10gt99 char(1) -- pct10gt99
,@pct25 char(2) -- pct25
,@pct25gt99 char(1) -- pct25gt99
,@pct50 char(2) -- pct50
,@pct50gt99 char(1) -- pct50gt99
,@pct75 char(2) -- pct75
,@pct75gt99 char(1) -- pct75gt99
,@pct90 char(2) -- pct90
,@pct90gt99 char(1) -- pct90gt99
,@pct95 char(2) -- pct95
,@pct95gt99 char(1) -- pct95gt99
,@pct99 char(2) -- pct99
,@pct99gt99 char(1) -- pct99gt99
,@icd9_code char(6)
,@cpt4_code char(6)
declare first_csr cursor for
select
icd9_code
,cpt4_code
from los_copy
open first_csr
fetch next from first_csr into
@icd9_code
,@cpt4_code
While @@fetch_status = 0
begin
declare ext001_csr cursor for
select
diagnosis_code
,age_group
,diagnosis_procedure
,category_code
,regioncode
,sum_level
,total_pts
,average_stay
,variance
,pct10
,pct10gt99
,pct25
,pct25gt99
,pct50
,pct50gt99
,pct75
,pct75gt99
,pct90
,pct90gt99
,pct95
,pct95gt99
,pct99
,pct99gt99
from
los
where
diagnosis_code = @icd9_code
open ext001_csr
fetch next from ext001_csr into
@diagnosis_code
,@age_group
,@diagnosis_procedure
,@category_code
,@regioncode
,@sum_level
,@total_pts
,@average_stay
,@variance
,@pct10
,@pct10gt99
,@pct25
,@pct25gt99
,@pct50
,@pct50gt99
,@pct75
,@pct75gt99
,@pct90
,@pct90gt99
,@pct95
,@pct95gt99
,@pct99
,@pct99gt99
if @@fetch_status = 0
Begin
-- insert data
insert into los_load
(
diagnosis_code
,age_group
,diagnosis_procedure
,category_code
,regioncode
,sum_level
,total_pts
,average_stay
,variance
,pct10
,pct10gt99
,pct25
,pct25gt99
,pct50
,pct50gt99
,pct75
,pct75gt99
,pct90
,pct90gt99
,pct95
,pct95gt99
,pct99
,pct99gt99
)
values
(
@cpt4_code
,@age_group
,@diagnosis_procedure
,@category_code
,@regioncode
,@sum_level
,@total_pts
,@average_stay
,@variance
,@pct10
,@pct10gt99
,@pct25
,@pct25gt99
,@pct50
,@pct50gt99
,@pct75
,@pct75gt99
,@pct90
,@pct90gt99
,@pct95
,@pct95gt99
,@pct99
,@pct99gt99
)
fetch next from ext001_csr into
@diagnosis_code
,@age_group
,@diagnosis_procedure
,@category_code
,@regioncode
,@sum_level
,@total_pts
,@average_stay
,@variance
,@pct10
,@pct10gt99
,@pct25
,@pct25gt99
,@pct50
,@pct50gt99
,@pct75
,@pct75gt99
,@pct90
,@pct90gt99
,@pct95
,@pct95gt99
,@pct99
,@pct99gt99
close ext001_csr
deallocate ext001_csr
fetch next from first_cursor
into
@icd9_code
,@cpt4_code
close first_cursor
deallocate first_cursor
go
if not exists(select name
from sysobjects
where name='sp_alicare_99'
and type='P')
print '>>ERROR:procedure sp_alicare_99 not created.'
go
Thanks in advance!!
View 1 Replies
View Related
Nov 3, 2000
Hey,
How do I put anything there for an INT type???
It is in a stored procedure and I have six parameters that I am passing in, some are blank and I want to put a default all variable in the where statement.
Select tbl_EventDate.EventDate , tbl_EventDate.EventDateID_p FROM tbl_EventDate WHERE EventDateID_p = %
This does not work.... I tried * too..... hmmmm....
View 1 Replies
View Related
Mar 10, 2004
Hi,
Below is my store proc:
create procedure usp_find_case_by_date_usrcode_client
@usrcode as varchar(5) = '%',
@disch_dt_start as varchar (12) = '%',
@disch_dt_end as varchar (12) = '%',
@client_id char(2) = '%'
as
select distinct t.patient_id,p.first_name,p.last_name,convert(char (12),p.birthdate,101) Birthdate,sex,t.auth_id,t.place_of_service,convert (char(12),t.discharge_date,101) Discharge_date, i.service_id from patient_transaction t
inner join inpatient_service i on t.patient_id = i.patient_id and t.tran_id = i.tran_id
and CONVERT(VARCHAR,ISNULL(i.service_id ,0)) LIKE @usrcode and t. place_of_service = '1' and t.decision in ('1', '2') and
t.discharge_date between convert(char(12),@disch_dt_start,101) and convert(char(12),@disch_dt_end,101) and
CONVERT(VARCHAR,ISNULL(substring(t.patient_id,1,2) ,0)) LIKE @client_id
inner join patient p
on t.patient_id = p.patient_id
order by 1
I want to get all clients if I don't specify the parameter @client_id
but when I do that I get 0 records. What am I doing wrong??
Thanks in advance.
View 6 Replies
View Related
Mar 22, 2006
samir khatri writes "hello sir,
i m new in the world of database so please help me to create a perticular store proc
i want to get data from 3 tables and 2 field of a table is match with the same field of another table and it cant work
i write that code so u can understand easily but it dont work so please modify that and make it workable
select a.a_dis_id,b.name as fromname,b.name as toname,a.a_dis_km,c.a_all_name,c.a_all_rate from
a_distance a,levels b,a_allowance c where
a.a_dis_from=b.cid and a.a_dis_to=b.cid and c.a_all_id=a.a_all_id
Thank You
Waiting for yur reply....."
View 3 Replies
View Related
Jun 21, 2004
The tile says it all... How to put into a Cursor the result of a procedure that selects certain rows.
View 1 Replies
View Related
Dec 21, 2001
I was wondering if anybody can help me in a storeProc for SQL 7 which can get the realational tables frm a database and put them into filesystem...
Cheers
--Nik
View 1 Replies
View Related
Jun 19, 2003
Is there anyway to force sql server to use the same execution plan?
One of the sp for web page takes about 2 minutes to execute. Once it's executed through query analyser, it takes relatively less time.
Is there any explanation for this?
View 5 Replies
View Related
Jul 1, 2002
Hello everyone,
I am looking for a store procedure which validates certain keywords like delete,truncate,update,insert etc. and restricts them to be used by users in all of my store procs which takes strings as inputs.
Thanks.
View 3 Replies
View Related
Nov 8, 2000
What command do you use to run a DTS package from a stored procedure....
The XP Copy is not working???
Thanks,
~Lee
View 1 Replies
View Related
May 19, 2004
Is it possible that i can use a store proc to modify all the rest of my store procedures that i have in my DB ??
I have so many created allready and it will be to long to go throught each one of them to modify my text inside.
what i wish to do is a store proc that will allow me to loop to all my store proc of the current DB and look inside for specific text that i would like to change with the new value !!
any advise or example..
thanx.
View 4 Replies
View Related
Apr 4, 2008
Hello i have this store proc with the syntax below. The getdate get the current date but i need to change the date this one time to 3/20/2005. I was wondering is there a way to do that an not modify my sp. I tried to harcode 3/20/2005 as asofdate and i get all 0 in my table.
getDate() AS AsOfDate'
View 4 Replies
View Related
Jan 25, 2008
Hi all,
One of the Sql server crashed and when the server restart, the Store Procs have locked icon. Can't modify or do anything with it, but the proc still run. What could have cause this, and how can I remove the lock icon?
thanks
View 1 Replies
View Related
Jul 26, 2006
QuestionWhat is the best way to transfer Stored Procedures to another db without having to script it?
WHYWe need to transfer stored procedures from one development database to another on different machines not on the same network.
PlatformStudio 2005
SQL Server Management Studio Express
advTHANKSance
View 5 Replies
View Related
Jul 10, 2014
I have a situation where I need to call a stored procedure once per each row of table (with some of the columns of each row was its parameters). I was wondering how I can do this without having to use cursors.
Here are my simulated procs...
Main Stored Procedure: This will be called once per each row of some table.
-- All this proc does is, prints out the list of parameters that are passed to it.
CREATE PROCEDURE dbo.MyMainStoredProc (
@IDINT,
@NameVARCHAR (200),
@SessionIDINT
)
AS
BEGIN
[Code] ....
Here is a sample call to the out proc...
EXEC dbo.MyOuterStoredProc @SessionID = 123
In my code above for "MyOuterStoredProc", I managed to avoid using cursors and was able to frame a string that contains myltiple EXEC statements. At the end of the proc, I am using sp_executesql to run this string (of multipl sp calls). However, it has a limitation in terms of string length for NVARCHAR. Besides, I am not very sure if this is an efficient way...just managed to hack something to make it work.
View 9 Replies
View Related
Aug 31, 2004
I try to get the TOP of the query but SQL do not allow me to do so. Is there a way to do this.
thanx
===============
Incorrect syntax near '@NbrItems'. Line 14
===============
create procedure NewsList
@ModuleID int,
@NbrItems int
as
if @NbrItems = 0
select * from TblNews where ModuleID = @ModuleID order by CreationDate DESC
else
select top @NbrItems * from TblNews where ModuleID = @ModuleID order by CreationDate DESC
GO
View 1 Replies
View Related
Mar 23, 2006
I am new to sql server 2005 but this should be easy but what ever. Could someone explain how I can edit my existing store procedure from Management Studio? Any time I do a save it wants to save a .sql file !
Thanks
View 7 Replies
View Related
