Help With Cursor And Fetch Statement
Mar 17, 2008
Hello,
I am hoping someone can help me with using the cursor and fetch functions. I have not used these features in the past and I am now stuck when trying to use IF statements with the fetch function.
I have a temp table populated with the below headers and their associated data.
The headers are as follows:
ItemRcvdKey, TranID, TranDate, QtyReceived, UnitCost, ItemKey, WhseKey, ItemID, ShortDesc, WhseID, QtyOnHand, StdCost.
The information contained in this temp table lists every single receipt of goods against all of our inventoried items. The QtyOnHand listed on each record is the total QtyOnHand for that item in that warehouse. What I need the fetch to do is grab the receipt of goods records, starting with the most recent TranDate, and pull them into the new temp table until the QtyOnHand is reached. The QtyonHand it should be comparing too is the one listed on the first fetched record. Once the Sum of the QtyRcvd is equal to or is greater than the QtyOnHand for that item I need the fetch to move on to the next item number and perform the same function.
One thing I need to be clear on is that if there are 3 Receipt Records(TranID) for Item A in Warehouse A, the total QtyOnHand will be listed 3 times. I need to make sure that the Fetch is comparing all the records for Item A in Warehouse A to one instance of the QtyOnHand.
The other aspect is that there will be receipt of goods for the same item in multiple warehouses. So I also need the Fetch to be sure that when it is grabbing records and putting them in the temp table, it makes sure it is matching the ItemID and the WhseID with the record it started with.
The current script I have written is below. If you can offer any help I would greatly appreciate it.
Code SnippetDeclare @ItemID VarChar(30),
@QtyOnHand Decimal (16,8),
@WhseID VarChar (6),
@SumRcvd Int,
@TranID VarChar(30),
@TranDate DateTime,
@QtyRcvd Decimal (16,8),
@UnitCost Decimal (16,8),
@ItemKey Int,
@WhseKey Int,
@ShortDesc VarChar (40),
@StdCost Decimal (16,8)
DECLARE Temp_cursor CURSOR FOR
SELECT TranID, TranDate, QtyRcvd,
UnitCost, ItemKey, WHseKey,
ItemID, ShortDesc, WhseID,
QtyOnHand, StdCost
FROM #Temp1 tem
OPEN Temp_cursor
FETCH NEXT FROM Temp_cursor
INTO @TranID, @TranDate, @QtyRcvd,
@UnitCost, @ItemKey, @WHseKey,
@ItemID, @ShortDesc, @WhseID,
@QtyOnHand, @StdCost
WHILE @@FETCH_STATUS = 0
BEGIN -- 0
Insert Into #Temp3
(TranID, TranDate, QtyRcvd,
UnitCost, ItemKey, WHseKey,
ItemID, ShortDesc, WhseID,
QtyOnHand, StdCost)
Values
(@TranID, @TranDate, @QtyRcvd,
@UnitCost, @ItemKey, @WHseKey,
@ItemID, @ShortDesc, @WhseID,
@QtyOnHand, @StdCost)
FETCH NEXT FROM Temp_cursor
INTO @TranID, @TranDate, @QtyRcvd,
@UnitCost, @ItemKey, @WHseKey,
@ItemID, @ShortDesc, @WhseID,
@QtyOnHand, @StdCost
View 3 Replies
ADVERTISEMENT
Jun 22, 2004
Let's say i have 5 unique RRID's, column APID and ITID
RRID - APID - ITID
1 13 700
2 13 700
3 13 700
4 14 700
5 15 700
If I run the stored procedure below, I get the results above however, I want my result to be
RRID - APID - ITID
1 13 700
2 13 700
3 13 700
4 14 701
5 15 702
I want my cursor to loop at the same APID then assign one ITID then move to the next APID and so on...
Any help is highly appreciated....
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
ALTER PROCEDURE InsNewEmployeeImpTaskP2
@REID int,
@LOID int,
@RetValintoutput
AS
Declare @RRID int
Declare @APID int
Declare @intREID varchar(20)
Declare @intIMID varchar(20)
Declare crReqRec cursor for
select RRID from RequestRecords where REID = @REID and RRSTatus = 'AC' and APID is not null
open crReqRec
fetch next from crReqRec
into
@RRID
set @APID = (select APID from RequestRecords where REID = @REID and RRID = @RRID)
set @intIMID = (SELECT ImplementationGroup.IMID
FROM ImplementationGroup_Location INNER JOIN
ImplementationGroup ON ImplementationGroup_Location.IMID = ImplementationGroup.IMID INNER JOIN
Applications_ImplementationGroup ON ImplementationGroup.IMID = Applications_ImplementationGroup.IMID where APID = @APID and ImplementationGroup_Location.LOID = @LOID )
insert into ImplementationTasks
(
IMID,
ITStatus,
ITStatusDate
)
VALUES
(
@intIMID,
'2',
GetDate()
)
SET @RetVal = @@Identity
while @@fetch_status = 0
Begin
Update RequestRecords
set ITID = @RETVal, RRStatus = 'IA'
where REID = @REID and RRID = @RRID
FETCH NEXT FROM crReqRec
into
@RRID
end
close crReqRec
deallocate crReqRec
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
View 1 Replies
View Related
Nov 4, 2007
Hi,
I'm relatively inexperienced in sql, and am having trouble interpreting the behavior of a cursor in some code I have inherited. When there is a record in both the Filters and FilterElements tables, the fetch_status is 0. If there is a record in Filters, but no child record in FilterElements, the fetch_status is -1. Since the tables are joined with a RIGHT OUTER JOIN, even when there is no corresponding record in FilterElements, a record is returned (I have verified running the select in a query window). But when used in a cursor, the record is not fetched. The fetch_status is -1. Can anyone tell me why the fetch doesn't work in this case. Thanks
----
DECLARE @CreatedByUser nchar(100), @WorkflowIDs varchar(50);
DECLARE @MyVariable CURSOR;
SET @MyVariable = CURSOR FOR
SELECT isnull(Filters.WorkflowIDs, ''),
isnull(FilterElements.CreatedByUser, '')
FROM Filters RIGHT OUTER JOINFilterElements ON Filters.ItemID = FilterElements.FiltersItemID
WHERE FiltersItemID = @FilterID;
OPEN @MyVariable;FETCH NEXT FROM @MyVariable
INTO @WorkflowIDs, @CreatedByUser;
View 3 Replies
View Related
Jan 15, 2004
it seems that starting with MDAC 2.8 the FETCH NEXT statement for cursors requires an INTO clause. otherwise an unspecified error is returned.
so it's not possible to scroll through the records anymore without storing the values of the fields into local variables?
View 2 Replies
View Related
Sep 8, 2003
Open a cursor , Fetch the record ,
during this kind of operation , will the specific table be locked and fail
to be updated or select by another session ?
View 7 Replies
View Related
Feb 28, 2006
I seem to have a few problems with the below double cursor procedure. Probably due to the fact that I have two while loops based on fetch status. Or???
What I want to do is select out a series of numbers in medlemmer_cursor(currently set to only one number, for which I know I get results) and for each of these numbers select their MCPS code and gather these in a single string.
For some reason the outpiut (the insert into statement) returns the correct number 9611 but the second variable @instrumentlinje remains empty.
If I test the select clause for 9611, it gets 4 lines. So to me its like the "SELECT @instrumentlinje = @instrumentlinje + ' ' + @instrument" statement doesn't execute.
DELETE FROM ALL_tbl_instrumentkoder
DECLARE @medlem int
DECLARE @instrument varchar(10)
DECLARE @instrumentlinje varchar(150)
DECLARE medlemmer_cursor CURSOR FOR
SELECT medlemsnummer
FROM ket.ALL_tbl_medlemsinfo (NOLOCK)
WHERE medlemsnummer = 9611
DECLARE instrumenter_cursor CURSOR FOR
SELECT [MCPS Kode]
FROM Gramex_DW.dbo.Instrumentlinie (NOLOCK)
WHERE Medlemsnummer = @medlem
OPEN medlemmer_cursor
FETCH NEXT FROM medlemmer_cursor INTO @medlem
WHILE @@FETCH_STATUS = 0
BEGIN
OPEN instrumenter_cursor
FETCH NEXT FROM instrumenter_cursor INTO @instrument
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @instrumentlinje = @instrumentlinje + ' ' + @instrument
FETCH NEXT FROM instrumenter_cursor INTO @instrument
END
CLOSE instrumenter_cursor
INSERT INTO ALL_tbl_instrumentkoder VALUES(@medlem, @instrumentlinje)
FETCH NEXT FROM medlemmer_cursor INTO @medlem
END
CLOSE medlemmer_cursor
DEALLOCATE medlemmer_cursor
DEALLOCATE instrumenter_cursor
View 3 Replies
View Related
Sep 14, 2015
I write few lines to do a bottom-up calculation, with 'fetch last' and 'fetch prior'.
It seems that the condition 'WHILE @@FETCH_STATUS = 0' does not work when cursor arrives at the first line, as there is an error message:
'(1 row(s) affected)
6255.84
(1 row(s) affected)
Msg 16931, Level 16, State 1, Line 18
There are no rows in the current fetch buffer.
The statement has been terminated.'
how to fix the error?
Here is my code:
DECLARE @lastprice real
DECLARE @updatedprice real
DECLARE @updatedRe real
DECLARE @updatedAUX real
SET @lastprice = (
SELECT Close_P from #ClosePrice where #ClosePrice.DateTD = (SELECT MAX(#ClosePrice.DateTD) FROM #ClosePrice)
)
[code].....
View 4 Replies
View Related
Jan 28, 2008
Hello,
I have searched the net for an answer but could not find one. When I declare a table variable
and then try to insert fetched row into the table variable like:
Code Snippet
declare @table table (col1 nvarchar(50), col2 nvarchar(50))
declare curs for
select * from sometable
open curs
fetch next from curs into @table
it does not work. any help would be great.
thnx
View 6 Replies
View Related
Feb 5, 2001
Hi all,
I got a problem. I am working on DTS package. The last step is updating a table field. I wrote a stored procedure as below:
CREATE PROCEDURE [Update_product_manufacturer] AS
Declare @product_id int
Declare @supplier_name VarChar (255)
Declare ValueCursor Cursor For
select product.product_id, [P21_SUPPLIER_id_name_ke].[supplier_name]
from [VARIANT],[P21_INV_MAST_uid_itenID_weight_ke],[product],
[P21_INVENTORY_SUPPLIER_uid_supplierID_price_cost_k e],[P21_SUPPLIER_id_name_ke]
where
[product].product_id = [VARIANT].[product_id]
and
[P21_INV_MAST_uid_itenID_weight_ke].[item_id]=[VARIANT].[SKU]
AND
[P21_INV_MAST_uid_itenID_weight_ke].[inv_mast_uid]=[P21_INVENTORY_SUPPLIER_uid_supplierID_price_cost_k e].[inv_mast_uid]
AND
[P21_SUPPLIER_id_name_ke].[supplier_id]=[P21_INVENTORY_SUPPLIER_uid_supplierID_price_cost_k e].[supplier_id]
order by [product].[product_id]
for read only
Open ValueCursor
while (0 = 0)
begin
fetch next
from ValueCursor
Into @product_id, @supplier_name
update product
set manufacturer = @supplier_name
where product_id = @product_id
end
close ValueCursor
Deallocate ValueCursor
Notes: Table: Product has 28,000 rows, other tables with 28,000 - 56,000 rows
it's been 2 hours, the job is still working.
Who has this kind of experience? How can I make updating quickly?
Thanks,
Kevin Zhang
View 1 Replies
View Related
Apr 4, 2004
Hi all
I want to put the fetch results of a cursor to a temporary DB for manipulation, Im selecting all columns from the table in the cursor and the number of total columns is unknow.
Please guide me on how this could be done...
Thanks in advance
Regards
Benny
View 1 Replies
View Related
Oct 7, 2004
I want to send 1 email with all clientname records which the cursor gets for me.
My code however is sending 1 email for 1 record i.e clientname got from db. What's wrong? please help.
I ano table to understand here about the while if right.
thanks.
+++++++++++++++++++++++++++++++++++++++++
CREATE PROCEDURE test1
AS
declare @clientName varchar(1000)
declare myCursor CURSOR STATIC
for
select client_name
from clients
-------------------------
-- now prepare and send out the e-mails
declare @ToEmail varchar(255)
declare @FromEmail varchar(255)
declare @Subject varchar(255)
declare @Body varchar(2000)
declare @UserID numeric(38)
declare @UserName varchar(255)
declare @SMTPServer varchar(100)
set @SMTPServer = 'test.testserver.com'
-- loop for each record
open myCursor
fetch next from myCursor
into @clientName
--loop now:
while (@@fetch_status=0)
begin -- while(@@fetch_status=0)
-- check if valid "To" e-mail address was found
if ((@clientName is null) or (ltrim(@clientName) = ''))
begin
--should not come here anytime ideally
set @FromEmail = 'me@test.com'
set @ToEmail = 'me@test.com'
set @Subject = 'was emailed to wrong person'
set @Body = 'the client name got is : '+ @clientName + 'client is null or empty'
end --if
else
begin
set @FromEmail = 'me@test.com'
set @ToEmail = 'me@test.com'
set @Subject = '-testing'
set @Body =
'this will send
ClientName:'+ @clientName
end --end else
-- send the e-mail
--exec dbo.usp_SendCDOSysMailWithAuth @FromEmail, @ToEmail, @Subject, @Body, 0, @SMTPServer
--fetch next from myCursor into @clientName
fetch next from myCursor
into @clientName
end --while(@@fetch_status=0)
exec dbo.usp_SendCDOSysMailWithAuth @FromEmail, @ToEmail, @Subject, @Body, 0, @SMTPServer
close myCursor
deallocate myCursor
GO
View 1 Replies
View Related
Dec 1, 2004
Dear all,
I have a procedure in Oracle that contains the following cursor:
CURSOR SCHED_TRIPS IS
SELECT TRAVELDATE, STOP_NUM, TRIPID, STOP_TYPE, PROMISED_TIME, ETA, PERFORM_TIME, DEPART_TIME, ETD, DRIVERWAIT, PASSENGERWAIT, TRIPTIME, GROUP_ID
FROM Dbo.SCHEDTRIPS_VIEW
WHERE UNQ_ID = SESSION_ID AND TRUNC(TRAVELDATE) = TRUNC(TDATE)
AND DISPOSITION <> 'V';
BEGIN
FOR S IN SCH_TRIPS LOOP
UPDATE dbo.SCHEDULES T
SET T.DIRTYBIT = 1
WHERE T.TRIPID = S.TRIPID AND T.STOP_TYPE = S.STOP_TYPE AND (T.STOP_NUM <> S.STOP_NUM OR T.ETA <> S.ETA);
UPDATE dbo.SCHEDULES T
SET T.STOP_NUM = S.STOP_NUM, T.PROMISED_TIME = S.PROMISED_TIME, T.ETA = S.ETA, T.ETD = S.ETD, T.LAST_CHANGED = SYSDATE
WHERE T.TRIPID = S.TRIPID AND T.STOP_TYPE = S.STOP_TYPE;
END LOOP;
COMMIT ;
END;
My problem is with the line shown in Red. What will be the T-SQL equivalent for this line.
Anxiously waiting for help!
View 11 Replies
View Related
Aug 9, 2014
I don't understand using a dynamic cursor.
Summary
* The fetch next statement returns multiple rows when using a dynamic cursor on the sys.dm_db_partition_stats.
* As far as I know a fetch-next-statement always returns a single row?
* Using a static cursor works as aspected.
* Works on production OLTP as well as on a local SQL server instance.
Now the Skript to reproduce the whole thing.
create database objects
-- create the partition function
create partition function fnTestPartition01( smallint )
as range right for values ( 1, 2, 3, 4, 5, 6, 7, 8 , 9, 10 ) ;
[Code]....
Why does the fetch statement return more than 1 row? It returns the whole result of the select-statement. When using a STATIC cursors instead I get the first row of the cursor as I would expect. Selecting a "normal" user table using a dynamic cursor I get the first row only, again as expected.
View 8 Replies
View Related
Dec 18, 2007
create proc emailnew
as
declare @From varchar(8000)
declare @Subject varchar(8000)
declare @Body varchar(4000)
declare @smtp varchar(8000)
declare @counter int, @tbl varchar(8000)
Declare @MailID int
Declare @hr int
Declare @To varchar(8000)
Declare @tblquery varchar(8000)
declare @id int, @deptemail varchar(8000), @tmpmth varchar(8000), @usedb varchar(8000)
set @from = 'name@mail.com'
set @subject = 'testheader'
set @body = 'testing successful'
set @smtp = 'smtp.com'
--=========================================================================
--============================ get database name =======================
IF (LEN(MONTH(GETDATE())) = 1)
BEGIN
Set @TmpMth = '0' + CAST(MONTH(GETDATE()) AS varchar(2)) --01
END
ELSE
BEGIN
Set @TmpMth = CAST(MONTH(GETDATE()) AS varchar(2)) --12
END
SET @UseDB = 'DATA' + CAST(YEAR(GETDATE()) AS varchar(4)) + @TmpMth --aia_DATA200712
--===================================================================
--============================ get table number =======================
set @counter = 1
while @counter >= 59
begin
IF (LEN(@counter) = 1)
BEGIN
Set @Tbl = '0' + @counter --01
END
ELSE
BEGIN
Set @Tbl = @counter --12
END
--=========================check if table being created exists
IF EXISTS (SELECT 1
FROM information_schema.schemata
WHERE catalog_name = 'temptable')
GOTO table_1
--=================================== get all email accounts =====================
set @tblquery = '
select ID, Email
INTO temptable
FROM
(
select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.other' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.inward' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.local' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.other' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
)data
DECLARE deptemail_cursor CURSOR FOR select id, email
from temptable where id is not null
'
--=============================================================================
--====just above you can see the cursor.. below is sending the emails
--======================================================================
exec(@tblquery)
OPEN deptemail_cursor
FETCH NEXT FROM deptemail_cursor INTO @id, @deptemail
WHILE @@FETCH_STATUS = 0
BEGIN
--If LEN(@deptemail) > 0
--BEGIN
set @to = @deptemail
EXEC @hr = sp_OACreate 'CDo.message', @MailID OUT --CDo.message |CDONTS.NewMail <-- different mail server
EXEC @hr = sp_OASetProperty @MailID ,
'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','2'
EXEC @hr = sp_OASetProperty @MailID ,
'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value', @smtp
EXEC @hr = sp_OASetProperty @MailID , 'From', @From
EXEC @hr = sp_OASetProperty @MailID , 'HTMLBody', @Body
EXEC @hr = sp_OASetProperty @MailID , 'Subject', @Subject
EXEC @hr = sp_OASetProperty @MailID , 'To', @to
EXEC @hr = sp_OAMethod @MailID , 'Send', NULL
EXEC @hr = sp_OADestroy @MailID
--END
FETCH NEXT FROM deptemail_cursor INTO @id, @deptemail
END
CLOSE deptemail_cursor
DEALLOCATE deptemail_cursor
Table_1:
drop table temptable
return
set @counter = @counter + 1
end
this is suppose to send email automatically to every email account that it will get from all the tables (around 250 tables).
the problem is its not sending, but if i try to take my code outside of the "SET @COUNTER = @COUNTER + 1 END" and close the if statement above, i can produce the correct result.. i'm thinking maybe its the positioning? but, there could be some overhauling needed to do with this.. sorry for posting the sp. sorry for the trouble.. please help me
View 2 Replies
View Related
Oct 21, 2015
I have been trying to write a cursor to fetch required data from table but somehow its running forever and inserting duplicate records.
I have a temp table named getInvoice where I have five important columns
1. invoice number
2.group
3.invoice status
4. Invoice Expiration date
5. Creation date time
and some other columns.One invoice number can belong to one or more group and there can be one or more records for a particular invoice number and group.
An example is below :
InvoiceNumber Group InvoiceStatus InvoiceExpirationDate CreationDateTime
579312 01 3 NULL 2003-03-24 00:00:00
579312 01 2 2015-12-14 00:00:00 2005-12-24 00:00:00
579312 02 2 2003-12-21 00:00:00 2005-10-12 00:00:00
321244 01 2 2015-12-21 00:00:00 2005-10-12 00:00:00
321244 01 3 2010-12-21 00:00:00 2010-12-21 00:00:00
My query condition is complex and that is why Im facing problem retrieving the output.I need a cursor for getting distinct invoice number from the table and for each invoice number I need to get the latest record for each invoice number and suffix combination based on creationdateand time column and if that record has invoice status of 2 and also the invoice expiration date can be either null or greater than today's date, then I need to get that record and put it in a temp table.
The query I wrote is below
declare myData cursor for
select distinct invoiceNumber from #getInvoice
declare @invoiceNumber varchar(30)
open myData
fetch next from myData into @invoiceNumber
while @@FETCH_STATUS = 0
[Code] .....
This query runs forever and doesn't stop.
View 6 Replies
View Related
Apr 7, 2008
Dear All
I have no idea to write a store procedure or only query to pass a string parameter more than 4000 characters into execute() and return result for FETCH and Cursor.
Here is my query sample for yours to understand.
SET NOCOUNT ON
DECLARE @ITEMCODE int, @ITEMNAME nvarchar(50), @message varchar(80), @qstring varchar(8000)
Set @qstring = 'select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm'
PRINT '-------- ITEM Products Report --------'
DECLARE ITEM_cursor CURSOR FOR
execute (@qstring)
OPEN ITEM_cursor
FETCH NEXT FROM ITEM_cursor
INTO @ITEMCODE
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT ' '
SELECT @message = '----- Products From ITEM: ' +
@ITEMNAME
PRINT @message
-- Get the next ITEM.
FETCH NEXT FROM ITEM_cursor
INTO @ITEMcode
END
CLOSE ITEM_cursor
DEALLOCATE ITEM_cursor
Why i use @qstring? It is because the query will be changed by different critiera.
Regards
Edmund
View 6 Replies
View Related
Jul 25, 2015
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
View 2 Replies
View Related
May 25, 2007
I'm just know basic SQL but not enough to write any complex queries.The problem I'm facing right now keeps me thinking to use a Cursor butI've seen a lot of posts on here saying Cursors are bad so I'm hopingthere is a complex query that can give me the data I need.I have about 6 pages in website where I need to display a datagrid ofinformation. There should be 5 columns, Filename, and then 4 CategoryTitles (These category titles are stored in a table calledPageCategory). I have another table, XREF_Doc_Page that stores thePageID, DocID (ID to know what file it is), and PageCategoryID. So Ican query this table with a pageID to see all the results that shouldbe on this page but I don't know how to format it the way I need mydatagrid?In order to have the records from PageCategory be columns, is this acrosstab query or something?My only thoughts right now are to user a cursor to query Pagecategoryand build a temp table somehow with these as the columns?? (Not surehow'd that would work yet).So the datagrid would have the 5 columns like I said and then justlist all files associated with this page and put a checkmark underwhichever category it was assigned to (example below...)Files PageCat1 PageCat2PageCat3 PageCat4abc.pdf Xxyz.pdf Xjkl.pdfx
View 4 Replies
View Related
Mar 26, 2000
Hi...
I have a stored procedure that rertrieves data from an sql database
and sends out a mail to each receipient who meets the criteria
I am using SQL mail.
I dynamically generate the where clause for my sql query based on criteria taken
from other stored procedures and store it in a varchar variable
called @sqlquery
When i have the following code to run my cursor
DECLARE overdue3 CURSOR
LOCAL FORWARD_ONLY
FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City,
Events.E_ID FROM Events, IndustryEvents + @sqlquery2
OPEN overdue3
I get an error message at the '+' sign
which says, cannot use empty object or column names, use a single
space if necessary.
What should i do. i have tested the variable @sqlquery and it is
definately not blank. There is no bracket error or anything.
Please help!!!
Thanks much indeed
Ramesh
View 1 Replies
View Related
May 20, 2003
Hi All, Can anyone please help?
TableA has data as below:
ssn sex dob rel_code
111111111 m 19500403 m
111111111 f 19570908 w
111111111 f 19770804 d
111111111 f 19801203 d
111111111 f 19869712 d
111111111 m 19870907 s
111111111 m 19901211 s
I have to convert the rel_code into a specific manner so the data will look as below in TableB:
ssn sex dob rel_code
111111111 m 19500403 01
111111111 f 19570908 02
111111111 f 19770804 20
111111111 f 19801203 21 111111111 f 19869712 22
111111111 m 19870907 30
111111111 m 19901211 31
Member's rel_code = 01
spouse's rel_code = 02
daughter's rel_code starts from 20 with the oldest and increments by 1.
Son's rel_code starts from 30 and increments by 1 from oldest to the youngest.
I know You can write a Sp with cursor and do this, but I would like to know if you can accomplish the same thing by a select or case or something else instead of a cursor.
Thanks in advance.
Jannat.
View 6 Replies
View Related
Dec 24, 2004
Hi All,
What i am trying to do is concatenate variable "@Where" with CURSOR sql statement,inside a procedure . But, it doesn't seem to get the value for
the @Where. (I tried with DEBUGGING option of Query Analyzer also).
=============================================
SET @Where = ''
if IsNull(@Input1,NULL) <> NULL
Set @Where = @Where + " AND studentid='" + @input1 +"'"
if isnull(@Input2,NULL) <> NULL
Set @Where = @Where + " AND teacherid =' " + @Input2 +"'"
DECLARE curs1 CURSOR SCROLL
FOR SELECT
firstname
FROM
school
WHERE
school ='ABC' + @where
=============================================
Please check my SQL Above and Could somebody tell me how can I attach the VARIABLE with CURSOR sql statement ?
Thanks !
View 3 Replies
View Related
May 9, 2012
I would like to get the results of a cursor into update statement but it fills only the last record of the cursor
this is the cursor:
Code:
DECLARE @avg varchar(50)
DECLARE @cur_avg CURSOR
SET @cur_avg = CURSOR FOR
select cast(avg(cast(reply as decimal(12,2))) as decimal(12,2)) from tbl_app_monitoring
group by test_name, application_id
this is the update statement:
Code:
OPEN @cur_avg
FETCH @cur_avg INTO @avg
WHILE (@@FETCH_STATUS = 0) BEGIN
UPDATE tbl_app_monitoring_archive
SET average = @avg
FETCH @cur_avg INTO @avg
END
is it also possible to do this without the cursor ?
View 5 Replies
View Related
Sep 18, 2013
I have a cursor that goes through a table with the names of all the database in my server. So for each fetch, the cursor gets the name of a database and assign it to a variable, @databaseName, and try to do some queries from that database by using the command "USE @databaseName". But "USE" doesn't take the variable @databaseName; it is expecting a database name (i.e. USE master).
Here is my code:
Declare @databaseName varchar(50)
Declare c_getDatabaseName CURSOR for SELECT name from tblDatabases
OPEN c_getDatabaseName
FETCH NEXT from c_getDatabaseName into @databaseName
While @@FETCH_STATUS = 0
[Code] ....
How to get USE to take the variable value ?
View 3 Replies
View Related
Jul 20, 2005
Help please,Have a situation when converting from Oracle SP's to SQL SP's. The oldoracle cursor was roughly as followsCURSOR cur_rsStock ISselect*from(select StockRowId, CategoryIdfromSTOCKDISPOSABLEwhereSTOCKDEFID=numDefIdORDER BYSTOCKROWID)whereROWNUM <= numQuantity;The closest I can get in MS SQL is as follows :declare cur_rsStockCURSOR forselect top @numQuantityStockRowId, CategoryIdfromSTOCKDISPOSABLEwhereSTOCKDEFID=numDefIdORDER BYSTOCKROWIDBut, SQL doesn't allow variables next to top. I know I can assign the wholeselect statement to a string and use exec to exec the string to get arecordset but how can I point a cursor to receive its output?i.e.set @strSQl = select top ' + @numQuantity + ' StockRowId, CategoryId.......exec @strSQLbut how do I dodeclare cur_rsStockset cur_rsStock = ( exec @strSQL)Flapper
View 4 Replies
View Related
Oct 24, 2007
Hi everyone,
The following snippet of code returns something like that: string;string1;string2
Up to here fine. I woner how to export such value to ssis variable??? That variable will contain the value needed for the FILEATTACHMENTS property (Send Mail Task)
Thanks a lot,
declare @anex as varchar(500)
declare @anex2 as varchar(700)
set @anex2 = ''
DECLARE anexos CURSOR FOR
SELECT [Ruta] + [Fichero] as ANEXO
FROM SVC_FICHEROS INNER JOIN SVC_ENVIOS ON SVC_FICHEROS.IDENVIO = SVC_ENVIOS.IDENVIO
WHERE ENVIADO = 0
OPEN anexos;
FETCH NEXT FROM anexos INTO @anex
WHILE @@FETCH_STATUS = 0
BEGIN
IF @anex2 = ''
begin
set @anex2 = @anex
end
else
begin
set @anex2 = @anex2 + ';' + @anex
end
FETCH NEXT FROM anexos INTO @anex
END
CLOSE anexos
DEALLOCATE anexos
View 3 Replies
View Related
Jan 10, 2000
I have to specifiy the database name which is supplied from the user (@fixdb). I want to do something like the following 'code'
Declare SysCursor cursor for + 'select Name, ID from ' + @fixdb +'.dbo.sysobjects where xtype = "u"'
but I can't seem to come up with the right statement.
Any help greatly appreciated.
Thanks,
Judith
View 1 Replies
View Related
Oct 19, 2015
adding a if statement within my cursor.
Use master
GO
DECLARE @dbname VARCHAR(50)
DECLARE @statement NVARCHAR(max)
DECLARE db_cursor CURSOR
LOCAL FAST_FORWARD
[code]....
The cursor should only grant access to a particular database. If the user exists within the database it should not execute the script.
View 0 Replies
View Related
Jul 20, 2005
HI AllI have a process that I am trying to accomplish with one statement. Icannot think of any way to do it other than using a cursor.I was wondering if anyone could point me in the right direction.I want to update the Domain in Table A with the Domain in Table Bwhere A.Account = B.Account with the highest rank.----------------------------------Table A--------------------------------------------------------------------Account|Domain--------------------------------------------------------------------Micorsoft|null----------------------------------IBM|null-------------------------------------------------------------TAble B--------------------------------------------------------------------------------------------------------------------------Account|Domain|Rank--------------------------------------------------------------------------------------------------------------------------Micorsoft|microsoft.com|9-------------------------------------------------------------Micorsoft|yahoo.com|2-------------------------------------------------------------Micorsoft|hotmail.com|1Thanks!!!
View 6 Replies
View Related
Jun 16, 2015
When I run this update statement, it updates the proper badgenumbers but it only updates them to 1 when I did a count? As the data displays some of the results should be more than 1. Why did this occur?
Declare
@count int,
@Assignment varchar(100),
@fullname varchar(100),
@timeworkedtoday decimal(18,2),
@badgeNum varchar(50),
@ticket varchar(50)
[Code] ....
View 5 Replies
View Related
Nov 9, 2007
Hi everyone,
I have been trying to perform the following task:
Using the sys.databases & sys.sysindexes views to display all the columns with a clustered index for all tables and all databases in a given server. So the end result will have 3 columns:
Database name
Table name
Column name from that table with a clustered index
I have already created the following script which displays all the databases for a given server:
declare @DBname nvarchar(128)
declare testCursorForDB cursor
for
select name from sys.databases with (nolock)
where name not in ('master','tempdb','model','msdb')
order by name
open testCursorForDB
fetch next from testCursorForDB
into @DBname
while @@fetch_status = 0
begin
print @DBname
fetch next from testCursorForDB
into @DBname
end
close testCursorForDB
deallocate testCursorForDB
I also have created the following query which will display all the table and column names which have a clustered index for a given database:
select object_name(i.id) as TableName,
i.name as IndexName
from sys.sysindexes as i with (nolock)
where i.indid = '1'
However, what I need help/advice on is how do I combine these two together into one working script (either using nested cursors or a better way). In other words, how can I specify which database to use (ie. using the "use database_name") so that my query above will be applied to each database found within the cursor.
Any help is greatly appreciated
Thanks!
View 7 Replies
View Related
Jul 26, 2006
I have a SQL statement stored in a SQL varriable (after a lot of conditions)
Code:
declare @sql char(100)
set @sql = 'select ma_kh, ten from _khang'
Now, I want to create a cursor to recalculate some values
I've tried:
Code:
declare cur_T cursor for exec(@sql) open cur_T
but it doesn't work.
Can I have another way to do that???
View 2 Replies
View Related
Mar 29, 2008
col1 col2 col3 col4
36930.60 145 N . 00
17618.43 190 N . 00
6259.20 115 N .00
8175.45 19 N .00
18022.54 212 N .00
111.07 212 B .00
13393.05 67 N .00
In above 4 col
if col3 value is B then cursor has to fectch appropriate value from col4.
if col3 value is N then cursor has to fectch appropriate value from col1.
here col2 values are unique.
Can any one reply for this..............
View 3 Replies
View Related
May 1, 2006
I have written a routine to search a unique record using prepared statement. Its my first sql coding with c++.
I am not using / importing any dlls.
I connect+allocs handels , then use SQLPrepare(StmtHandle, SQLStmt,SQL_NTS); to generate a guery.
I have written bind parameters and sqlexecute +sqlFetch in a loop and loop gets executed till ESC key is pressed.
First time when I bind paramaters using SQLBindParameter it works perfect.
When loop gets executed secondtime onwards, it gives an error.
SQLState: 24000 [ODBC Client Interface]Invalid cursor state.
If I open connection, handles, and prepared starement in same loop, THEN it gives correct record without 24000 error.
I want the advantage of prepared staement. So I do not want to close and open connection and prepare statement every time.
Have I missed any step?
Where & when I should code the cursor type? Any specific libraries I need to link?
Thanks
View 2 Replies
View Related
