Help With Delete Statement/converting This Select Statement.

Aug 10, 2006

I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID

I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:

SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180

View 1 Replies

Converting Y To Yes In SELECT Statement

Nov 21, 2007

A table has a column containing values "Y", "N", and some blanks.

I'm trying to write a single SELECT statement applied for that column that displays the word "Yes" instead of "Y" (in the table itself) and the word "No" instead of "N".

Can't figure it out. Any ideas appreciated.

Thanks,

barkingdog

View 1 Replies View Related

Need Help Converting A Select Query Into A Case Statement

Nov 24, 2004

I have the following query:

(SELECT MIN(CFGDates.AccountPdEnd)
FROM CFGDates LEFT JOIN
AR ON AR.Period = CFGDates.Period
WHERE AR.Period = '200408')

I need to convert this into a case statement.
I tried various ways but did not get the result that I was after

Thanks,
Laura

View 6 Replies View Related

Converting Datetime Formats - Select Statement?

Mar 20, 2014

I have a datetime format that comes in 'yyyy-mm-dd hh:mm:ss.nnn'

But I only want 'yyyy-mm'

I am not sure how to correctly write the select statements. Below is what I have..

How would I do this, so the datetime result is 'mmmm-yy' ....

SELECT
[RecordingDate],
[RecordedUserID],
[CombindedPercentieScore]
FROM [dbo].[scoringsummary]

WHERE convert(varchar(7), [RecordingDate],120) between convert(varchar(7), DateAdd(dd,-180,GetDate()), 120) AND convert(varchar(7), DateAdd(dd,-1,GetDate()), 120)

View 2 Replies View Related

Select Statement - Converting Text Into Decimal?

Jul 5, 2014

I have trouble converting a text field into decimals in a select statement.

The select statement is as follows:

select cast(ltrim(rtrim(units)) as decimal) as units

and I get an error message:

Msg 8114, Level 16, State 5, Line 23

Error converting data type nvarchar to numeric.

and the 'units' column contains ' 324,32 '

View 2 Replies View Related

Trouble Converting SELECT To INSERT Statement

Sep 18, 2005

Trying to convert the following SELECT statement into a INSERT statement and having trouble. No doubt this will be a piece of cake to someone. To eventually get this to a trigger stage would be nice, but for the moment I'd settle for just plain SQL. Using MS SQL 2000. The database name is reporting. The table name is CallLog. I'm trying to convert seperate date (RecvdDate) and time (RecvdTime) columns into a single DateTime column. I've scoured a lot of web pages but I'm still lost.

==============

use reporting
go

SELECT RecvdDate + RecvdTime FROM [dbo].[CallLog]

===============

Any help much appreciated.

View 7 Replies View Related

Transact SQL :: Delete Statement From Select Results

Jul 24, 2015

I'm trying to delete the selected data from a table colum from a select statement.

This is the select statement

SELECT RFC822 FROM SQLGOLDMINE.DBO.MAILBOX MB WHERE ((MB.CREATEON >= '2014-07-24' AND MB.CREATEON <= '2015-07-24') OR (MB.MAILDATE >= '2014-07-24' AND MB.MAILDATE <= '2015-07-24')) AND (MB.MAILREF LIKE '%auction notification
& invitation%')

What the delete statement would look like. I've tried replacing Select with delete from but get a sytax error.

View 9 Replies View Related

Select Statement Within Select Statement Makes My Query Slow....

Sep 3, 2007

Hello... im having a problem with my query optimization....

I have a query that looks like this:

SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)

it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View 3 Replies View Related

Multiple Tables Used In Select Statement Makes My Update Statement Not Work?

Aug 29, 2006

I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian

View 5 Replies View Related

SQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement

Jan 9, 2015

Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".

Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.

View 4 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement

Oct 29, 2007

Hi guys,
I have the query below (running okay):

Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01

The results are just as I need:

Field01 Field02

------------- ----------------------

192473 8461760

192474 22810

Because other reasons. I need to modify that query to:

Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:

Field02

----------------------

22810
8461760

And what I need is (without showing any other field):

Field02

----------------------

8461760
22810

Is there any good suggestion?
Thanks in advance for any help,
Aldo.

View 3 Replies View Related

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

Using Select Statement Result In If Statement Please Help

Jul 11, 2007

Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> INVALID CUSTOMER NUMBER <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated

View 2 Replies View Related

If STATEMENT Within Select Statement Syntax

May 15, 2008

Hi,

I am a newbie to this site and hope someone can help....

I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:

if(TL_flag= '1', "yes") as [Trial Leave]

it is coming up with an error.... I can use Select case but I should not need to as this should work?

Any ideas?

View 2 Replies View Related

Converting CASE Statement

Dec 20, 2013

I have a case statement which I need to alter in my query. The field [sr.spec_value] contains either 1 or 0. When it is 1 I want the case expression to return 'YES' when 0 then 'NO'. I've tried a couple of options from the forum but am not getting it right. Here is the original case statement from my query:

case when sr.spec_value = 1 then 'YES' when 0 then 'NO' end [Fixed].

View 5 Replies View Related

Converting Date In Case Statement

Apr 29, 2015

I have a query where I need to see in 2 seperate columns, the Actual date of deliveries and collections, and the Invoice Week number of the same. The problem is that in our ERP system delivery date (di.ddate) is a date field, and the collection date is nvarchar. This is my query and sample results below, as you can see I'm getting nulls for the collection lines. How can I do this efficiently

select di.dticket, di.item,
case di.item when 'DEL' then di.ddate when 'COL' then CONVERT(datetime,di.text2,103) end ActDate,
Case when di.item = 'DEL' then
(select YearWeek from MCSReports.RptRevenueGuideWeekLookup
where di.ddate between FromDate and ToDate) end InvWeek

from deltickitem di
where item in ('DEL','COL')

Sample results below:

dticket item ActDate InvWeek
-------------------- -------------------------------------------------- ----------------------- --------
01-000002 DEL 2011-07-05 15:53:00.000 2011-27
01-000002 COL NULL NULL
01-000004 DEL 2011-07-05 16:04:00.000 2011-27
01-000004 COL NULL NULL
01-000005 DEL 2011-07-05 16:08:00.000 2011-27
01-000005 COL NULL NULL
01-000006 DEL 2011-07-05 16:19:00.000 2011-27
01-000006 COL NULL NULL
01-000007 DEL 2011-07-05 16:24:00.000 2011-27
01-000007 COL NULL NULL
01-000008 DEL 2011-07-05 16:29:00.000 2011-27
01-000021 DEL 2011-07-05 08:48:00.000 2011-27

View 6 Replies View Related

Converting Data Like A Case Statement

Oct 10, 2006

Hello.

I have data in a SSIS package that I need to alter to something else.

The source column is a VARCHAR(3) column and it only contains two possible values, "ACT" or "CLS".

The destination column is a CHAR(1) column. Where the value of the source column is 'ACT' I want to put '1' in the destination and where the value of the source column is 'CLS' I want to put '0'.

I can do this easily in T-SQL using a CASE statement but the source data is an Ingres database and CASE isn't a valid SQL keyword.

Can I use a data conversion task to do this in SSIS? and if so, what's the syntax?

Thanks

View 10 Replies View Related

One DELETE Sql Statement To Delete From Two Tables

Aug 12, 2007

I am trying to write one sql statement that deletes from two tables. Is it possible ? If yes, any thoughts ?

View 5 Replies View Related

Converting Case Statement Into Config Table

Nov 3, 2015

I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.

For examples

CASE
     WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
     WHEN PracticeCode IN (.......) THEN 1
     WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
      ELSE 0
END

I need to put these conditions in config table and generate dynamic sql. What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.

View 5 Replies View Related

Using IF...Else Statement SELECT Statement

Sep 7, 2006

Hi All,

Can some one point me in the right direction in how to construct my SQL query within my cursor?

I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So:

SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id

so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log

and do other statements if there is no match

how do i add this condition to my statement either using an if...else statement proceeding to the next row?

here is the statment i attempted to write:

SELECT column_List
FROM table1
WHERE
Table1_id = Table2.id

now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id

IF table1.id <> table2.id

BEGIN
 SET @DebugMessage = 'data not live.'
 RAISERROR (@DebugMessage, 16, 1) WITH LOG
 END

essentially what i am trying to sayin my statement is:

go to the first row

check if it has a match in table 2,

if there is no match execute a number of statements such as error loging e.t.c

go to the next row

repeat the previous statements

...i also looked through some Case...When statements am just not sure how to put in the condition

thanks in advance

View 1 Replies View Related

Delete Statement

Apr 11, 2007

Hi,I would like to delete a record from a table on the condition that a corresponding ID is located in another table, ie. deleting an email message if the user ID is listed as a recipient in a recipient table etc. Here is my SQL statement: DELETE FROM id_email_message WHERE (id_message IN (SELECT id_message FROM recipients
WHERE id_user = 324) AND message.id_message_status = 2) OR (id_message IN
(SELECT id_message FROM message WHERE id_owner = 324 and id_message_status = 2)) The problem is the multiple select statements paired with the delete statement is too much overhead for the server and I always get a timeout server error (at least that's what I'm guessing, the error page and tracing isn't much helpful). Is there a more efficient way to do this?Thanks.Eitan

View 1 Replies View Related

Help With DELETE Statement

Nov 13, 2007

Hello there... I'm creating a ASP.net Web Application and storing all my data in SQL database.I'm trying to create a Stored Procedure to Delete info from a table:- I have 3 tables: A, B and C: A's primary key is aID and has no foreign key B's primary key is bID and has 1 foreign key: aID (linking this table to table A); C's primary key is cID and has 1 foreign key: bID (linking this table to table B);- As you can see, all 3 tables are linked (A to B and B to C)I want to be able to DELETE all info from C only by giving aID, is this possible in SQL? I can retrieve the info easily through a SELECT statement and using an INNER JOIN (*). I also know how to do solve this by coding it in C# but I'd have to create some unnecessary variables and more than 1 Stored Procedure when it's probably possible to do all in one!* SELECT cID FROM C INNER JOIN B ON B.bID = C.bIDWHERE A.aID= whateverIf anyone knows the solution to my problem, please don't hesitate :p Thanks,SuperJB

View 2 Replies View Related

Sql Delete Statement

Sep 15, 2004

hi, i want to delete some records from my table if there is more then 150 records (it should always be max 150records, it can be less and then it shouldent delete anything),
so when it goes over to 151 records i want to delete the oldest record, so i get the new record + 149 old records, is there a simple way to do this?

View 10 Replies View Related

DELETE Statement

Dec 14, 2001

When does the DELETE statement physically deletes the records? For example, if I execute the DELETE statement and in the middle of the execution I understand that it is wrong. What will happen if I stop it? Will it delete the records partially? I think the deletion happens when the full statement is done but need an expert answer. Thank you.

View 7 Replies View Related

SQL Delete Statement

Oct 2, 2006

Hi what do i need to add to this stmt to delete the result ?
---------------
select ct_cust1_text01,ct_address,ct_cust1_text09,count(*)from TABLE_NAME group by ct_cust1_text01,ct_address,ct_cust1_text09 having count(*) > 1
---------

i have tried delete * from TABLE_NAME where (select...)

not great at SQL appreciate any help...

View 3 Replies View Related

SQL 2012 :: Converting Case Statement To Config Table?

Nov 3, 2015

I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.

For examples

CASE
WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
WHEN PracticeCode IN (.......) THEN 1
WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
ELSE 0
END

I need to put these conditions in config table and generate dynamic sql.

What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.

View 2 Replies View Related

Easy One(?) Converting Sql05 Statement To Work In Sql Express

Feb 7, 2008

Hi, I was handed an old application written for sql05, it has this (kind of) statement:
Dim CommandText As String = "SELECT c.name FROM db1 c LEFT JOIN "

CommandText += "db2.dbo.Users u ON u.iKey = c.key "

CommandText += "WHERE u.cUserName = '" & User & "'"

As you can see, there are two databases, db1 and db2 and this worked fine in sql05, but when I convert each of the databases to sqlexpress, I get this error: Invalid object name 'db2.dbo.Users'.

So how can I make this work in sqlexpress? Are queries across databases not allowed?

Thanks so much for your help!

View 3 Replies View Related

DELETE Statement Conflicted

Dec 6, 2006

Hello
I am trying to delete a row from one table and I expected it to also be removed from the subsequent child tables, linked via foreign and primary keys.
However, when I tried to delete a row in the first table I saw this error:
DELETE FROM [dbo].[Names_DB]WHERE [LName_Name]=N'andrews'
Error: Query(1/1) DELETE statement conflicted with COLUMN REFERENCE constraint 'FK_LName_Name'. The conflict occurred in database 'MainDB', table 'Category_A', column 'LName_Name'.
I went to the very last table in the sequence and I was able to delete the row without problems, but it did not effect any of the other tables.
Please advise.
I need to make many changes in these tables, should I use a trigger instead, if so what is the code to trigger each table? I am new to triggers.
Thanks
Regards
Lynn

View 6 Replies View Related

Trigger On Delete Statement

Sep 26, 2007

Hi! I am deleting some records from the database and at the same time inserting them into a new table. I am doing all this with sql querries. How can that be done with triggers. Basically on the delete, i'd like to insert the affected records. Thanks!
James

View 2 Replies View Related

Only One Of My SQL Delete Statement Are Firing

Mar 12, 2006

Hey guys...
I am trying to tidy up my code a bit and have one SQL command (Sub class) to call when needing to insert, update, delete and select.
I have got one class I am testing with that delete from a table support_ticket and then calls RunSQL() again to delete the corresponding tickets in Support_Reply.
however it only seems to want to delete from one table at a time...as i commented out the first sql and it worked and the second fires...but if the first one is active it doesnt fire.
Do anyone on the forum know why this has happened?

Sub DeleteUserTicket(sender as Object, e as EventArgs)
Dim strSQL1 = "DELETE FROM Support_Ticket WHERE (TicketID = " & txtticketID & ")"
RunSQL(strSQL1)
strSQL1 = "DELETE FROM Support_Reply WHERE (TicketID = " & txtticketID & ")"
RunSQL(strSQL1)
End Sub
'One class to run the sql statements for the entire page this will reduce in repetitve code as well as reduce code size
Sub RunSQL(strSQL)
Dim objCmd As SqlCommand
Dim sqlConn = New SqlConnection(strConn)
objCmd = New SQLCommand(strSQL, sqlConn)
objCmd.Connection.Open()
'Check that the rows can be deleted if not then return a error.
Try

objCmd.ExecuteNonQuery()
response.redirect("ticketsystemtest2.aspx")
Message.InnerHtml = "Ticket " & txtticketID & " Closed "
Catch ex As SqlException
If ex.Number = 2627 Then
Message.InnerHtml = "ERROR: A record already exists with " _
& "the same primary key"
Else

Message.InnerHtml = "ERROR: Could not update record, please " _
& "ensure the fields are correctly filled out " & ex.Message & " " & ex.Number
Message.Style("color") = "red"
End If
End Try
objCmd.Connection.Close()
sqlConn = nothing
objcmd = nothing
End Sub

cheers

View 2 Replies View Related