Help With SQL Group By Please (results Returned Into / Shown In C#.Net)!
Oct 16, 2006
Hi all - i'm trying to put together my first .Net web page (have switched from Dreamweaver to VWD - VWD keeps swapping my tab-indents for spaces, and none of the options stop it!).
Here's a table that i'm trying to query: ItemID | ReviewRating | ReviewRatingOutOf
As i'm sure you've guessed, it's a reviews table, where there can be several records with the same ItemID and different (or the same) ReviewRating and ReviewRatingOutOf's. As the reviews are collected from lots of sources, the ReviewRatingOutOf will change (one review might be 3/5, while the next, for the same ItemID, could be 8/10, etc). Now, what i'm trying to do is return a list of ItemID's ordered by their RATIO (which is the sum of each ItemID's ReviewRating's divided by the sum of each ItemID's ReviewRatingsOutOf's - in other words, average score). My first guess was this:
"SELECT DISTINCT ItemID FROM Reviews ORDER BY SUM(ReviewRating)/SUM(ReviewRatingOutOf)" - unfortunately that doesn't work (problems with the SUM aggregate functions, and overflow errors, whatever they are). Now, this string works: "SELECT ItemID FROM Reviews GROUP BY ItemID ORDER BY SUM(ReviewRating)" - right now, that just adds up the ReviewRatings, so an item with 10 reviews that only got awarded 1/5, 1/10, 1/8, etc (all 1's, therefore achieving a combined ReviewRating of 10 out of a very much higher ReviewRatingOutOf), would appear higher than an item with 1 review that got 5/5. Making the string into this: "SELECT ItemID FROM Reviews GROUP BY ItemID ORDER BY SUM(ReviewRating)/SUM(ReviewRatingOutOf)" (which is what I need), unfortunately gives me errors...
Anyone have any ideas? Is there possibly a way to simply read all the distinct ItemID's with SQL, then get the two SUM's for each ItemID, then calculate the ratio of the two SUM's, and stick the ItemID's and the ratio into some sort of array, and have C# order the array for me, based on the ratio? I'd appreciate an example of that if possible, as i'm a complete C# beginner :-)
Thanks in advance!
View 7 Replies
ADVERTISEMENT
Oct 17, 2007
hi,
i have a problem with a report. if i try it with vs2005 and the preview it works.
if i call the report from my web-application i get no error-message, but i only get my
headlines and no query-results.
i use reportingservices 2005, vs2005 and .net 1.1
my datasource is an olap-cube.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ReportExecution.ExecutionInfo ei = repExecution.LoadReport(ReportPath, historyID);
repExecution.SetExecutionParameters(convertToReportExecutionParameter(Parameters), "de-AT");
result = repExecution.Render(Format, devInfo, out extension, out mimeType, out encoding, out warnings, out streamIDs);
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
do you have any idea?
thank you
harald
View 1 Replies
View Related
Jan 2, 2007
Hi,
I have data that is grouped by a code number. One of the code numbers have over 600 rows, while other code numbers have around 10 to 20 rows within it.
When I run the report the code number that has over 600 rows gets split over 2 pages while the other code numbers each get their own page.
How do I make it so that when I run the report the code number that has over 600 rows gets all displayed on the 1 page instead of being split over 2?
Thanks
Ben.
View 10 Replies
View Related
Apr 16, 2004
Hard to write a subject line to describe this one.
Anayway, I have a table with names and address plus an extra field noting a part number of product.
I'd like to build a SELECT string that will return one result for each name/address (uniques only in other words) and build a comma delimited field of all the part numbers for that name/address.
Example:
NAME ADDRESS PART NUMBER
John Smith 555 Main st., los angeles, ca 90003 5000
John Smith 555 Main st., los angeles, ca 90003 6650
Mike Jones 8569 West 18th Ave., San Diego, ca 1255
John Smith 555 Main st., los angeles, ca 90003 5144
Mike Jones 8569 West 18th Ave., San Diego, ca 2399
So I'd like my results to look like this:
NAME ADDRESS PARTS
John Smith 555 Main st., los angeles, ca 90003 5000,6650,5144
Mike Jones 8569 West 18th Ave., San Diego, ca 1255,2399
THanks in advance for any suggestions!
Raul
View 2 Replies
View Related
Oct 16, 2007
Hi,
I've got what is probably a simple question, but for the life of me I cannot figure it out and it is starting to do my head in . I have the following query:-
Select e.intEmployeeID AS ID, e.txtFirstName AS [First Name], e.txtLastName As [Last Name], e.txtMobile As [Mobile], i.txtWorkEmail as from EMPLOYEE AS e INNER JOIN EMPLOYEE_INFORMATION AS i ON i.intEmployeeID = e.intEmployeeID WHERE (((e.blnActive = -1) AND (e.txtFirstName Like '%b%')) OR ((e.blnActive = -1) AND (e.txtLastName Like '%b%')) ) ORDER By e.txtFirstName
In my database, the field blnActive is a BIT field. When I try to run this query, I get no results returned. If I remove the (e.blnActive = -1) WHERE statement segment, I get the correct results. The field blnActive contains -1 for every record but I cannot work out why it will not return these records .... aaarrrrggghhhh
Thanks to those who feel my pain !!
View 2 Replies
View Related
Sep 2, 2004
I am doing some SELECT queries on my database through ASP, but for example, I only want to return the 50 most recent entries that match the criteria. Is there any easy way to limit the number of results returned?
View 1 Replies
View Related
Jan 24, 2012
I am getting the following results from my query that contains a subquery, but I don't understand why the values in the [Total Volume M_Active_Previous] are being repeated with the same value. I should be getting different values returned for each row like in the [Total Volume M_Active] column.
Why the values are all the same and how I can fix this?
DayNoDayTotal Volume M_ActiveTotal Volume M_Active_Previous
6 Friday11161 72491
7 Saturday5687 72491
2 Monday14354 72491
1 Sunday3966 72491
4 Wednesday12340 72491
3 Tuesday12018 72491
5 Thursday11833 72491
Here is the SQL I'm using.
Code:
DECLARE @StartDate datetime, @EndDate datetime, @Prev_StartDate datetime, @Prev_EndDate datetime
SET @StartDate = '2011-03-13 00:00:00.000'
SET @EndDate = '2011-03-19 23:59:59.999'
SET @Prev_StartDate = '2011-03-06 00:00:00.000'
SET @Prev_EndDate = '2011-03-12 23:59:59.999'
[Code] ....
View 5 Replies
View Related
May 17, 2007
Iam using front page to dispalay my results.
At the bottom it shows me 1/10 i.e 1st page of 10 pages.
but what do i do if i want it to be shown as 1-10 out of 100 (if each page contains 10 results).
or it would be really good if i get count of both no. of recors as well as no. of pages.
View 2 Replies
View Related
Jan 8, 2004
I am trying to pull results from an SQL Server DB into an dataset where a particular field (SMALLDATETIME) is within a particular date range. The code I was using worked fine when the database was in Access. I have made several changes already but am still getting 0 results returned when there is data that should be returned.
I was using in Access:
Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>=#" & startDate & "# AND myDateField<=#" & stopDate & "# ORDER BY ID"
I have changed this for SQL Server to:
Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>='01/01/2003 00:00:01' AND myDateField<='01/01/2004 23:59:59' ORDER BY ID"
But I am always returned 0 results even if the date range should return plenty of data. I have also tried using the BETWEEN structure with the same result.
Is there a particular format for the date I am comparing with?
Am I missing something else in my query?
The connection / permissions and everything else are correct as I can read and write data to the database in numerous other pages. It is just this date comparison that is not working.
Many thanks for any help or comments you can provide.
View 2 Replies
View Related
Oct 22, 2007
Hi,
I'm trying to use the XML Task XPath operation for the first time but having some problems. I'm using the following settings:
Source type: File connection
SaveOperationResult: True (file destination)
SecondOperandType: Direct Input
PutResultInOneNode: False
XPathOperation: Values
The XML file I'm testing has the following stucture:
<?xml version="1.0" standalone="yes"?>
<BackupDataSet xmlns="http://tempuri.org/BackupDataSet.xsd">
<Device>
<DeviceID>6356452a-e7a6-42e1-895a-d4ade62210d5</DeviceID>
<UserID>1533c44f-c263-db11-9db3-000e9bd9f98d</UserID>
</Device>
</BackupDataSet>
When I set the SecondOperand to /* the output is a concatenated text string of DeviceID and UserID values. I'm trying to get just the DeviceID but perhaps my understanding of XPath syntax is wrong. I've tried setting the SecondOperand to the following:
//Device/DeviceID
/BackupDataSet/Device/DeviceID
//DeviceID
All of these return no results. What am I doing wrong?
Regards,
Greg
View 3 Replies
View Related
Sep 10, 2015
I have two tables A and B, A has 8000 and B has 8122 records. I want to see what records are missing. I tried EXCEPT and it returned zero rows. I used where non exists also still no records.
View 5 Replies
View Related
Sep 10, 2007
I have the follow table.
/****** Object: Table [dbo].[deletethisTempOut] Script Date: 09/10/2007 09:20:12 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[deletethisTempOut](
[ThemeName] [varchar](60) NULL,
[intLocationCount] [int] NULL,
[dblRepValueA] [float] NULL,
[dblRepValueB] [float] NULL,
[dblRepValueC] [float] NULL,
[dblRepValueD] [float] NULL,
[dblTotalRepValue] [float] NULL,
[dblLimit1] [float] NULL,
[dblLimit2] [float] NULL,
[dblLimit3] [float] NULL,
[dblLimit4] [float] NULL,
[dblTotalLimit] [float] NULL,
[fltEmployeecount] [float] NULL,
[intAreaLevel1] [tinyint] NOT NULL,
[strFullName] [varchar](13) NOT NULL,
[strAreaLevel2] [varchar](20) NOT NULL,
[strAreaLevel3] [varchar](20) NOT NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
If I use the following SQL:
SELECT ThemeName, intLocationCount, dblRepValueA, dblRepValueB, dblRepValueC, dblRepValueD, dblTotalRepValue, dblLimit1, dblLimit2, dblLimit3,
dblLimit4, dblTotalLimit, fltEmployeecount, intAreaLevel1, strFullName, strAreaLevel2, strAreaLevel3
FROM deletethisTempOut
ORDER BY strAreaLevel2, strAreaLevel3
GET Following correct results:
Adair
284
899989594
0
574857716
190479902
1665327212
0
0
0
0
1665327212
0
1
United States
1
1
IF I use the following SQL I get the wrong results:
SELECT ThemeName, intLocationCount, dblRepValueA, dblRepValueB, dblRepValueC, dblRepValueD, dblTotalRepValue, dblLimit1, dblLimit2, dblLimit3,
dblLimit4, dblTotalLimit, fltEmployeecount, intAreaLevel1, strFullName, strAreaLevel2, strAreaLevel3
FROM deletethisTempOut
ORDER BY ThemeName
WRONG results:
Adair
74
81733110
0
49616018
24671651
156020779
50510500
0
0
0
203870779
0
1
United States
50
1
Adair
437
1468698657
0
495479839
353202768
2317381264
12984266
0
0
0
2315676030
0
1
United States
25
1
Adair
1813
20309722045
0
6597005374
4253819645
31160547064
43636703
0
0
0
31135010742
0
1
United States
11
1
Adair
606
439581417
0
331746662
132240332
903568411
0
0
0
0
903568411
0
1
United States
45
1
Adair
236
350256381
0
524269553
504973831
1379499765
4080368
0
0
0
1380473415
0
1
United States
23
1etc.....
View 6 Replies
View Related
Oct 18, 2006
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
View 2 Replies
View Related
Nov 6, 2006
Hi,
I need to write a select query that will run all returned results through a separate stored procedure before returning them to me.
Something like....
SELECT TOP 10 userid,url,first name FROM USERS ORDER by NEWID()
......and run all the selected userids through a stored procedure like.....
CREATE PROCEDURE AddUserToLog (@UserID int ) AS INSERT INTO SelectedUsers (UserID,SelectedOn) VALUES (@UserID,getdate())
Can anyone help me to get these working togethsr in the same qurey?
Thanks
View 7 Replies
View Related
Apr 23, 2007
How can i group the data returned by statement below by "Dept" field. I have already tried to group it like shown below but that doesn't seem to work for me. Any help.
cmd_select = New SqlCommand("SELECT Incident_id,Dept From Report_Incident Group By Dept,Incident_id", myconnection_string)
View 3 Replies
View Related
Mar 23, 2006
It's me again :)
So; if you read my earlier thread here (http://www.dbforums.com/showthread.php?t=1214353), you'll know that I'm trying to build stored procedures to deal with ticketing queries, and that it's all getting a bit complicated. I have, however, made a bit of progress and now have the following working:
CREATE PROCEDURE [dbo].[getAvailableTickets]
@eventId INT,
@standId INT,
@admissionDateId INT,
@concessionId INT,
@userId INT
AS
DECLARE @startyear DATETIME
DECLARE @endyear DATETIME
SELECT @startyear=CONVERT(datetime, '2006/01/01')
SELECT @endyear=CONVERT(datetime, '2006/12/31')
SELECT
[tblTickets].[id] AS ticketId,
[tblEvents].[id] AS eventId,
[tblStands].[id] AS standId,
[tblAdmissionDates].[id] AS admitDateId,
[tblEvents].[event_name],
[tblStands].[stand_name],
[tblTicketConcessions].[concession_name],
[tblMemberships].[membership_name],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblBookingMinQuantities]. AS minBookingQuantity,
[tblBookingMaxQuantities].[booking_quantity] AS maxBookingQuantity,
MIN([tblQuotas].[quota]) AS Quota,
[B]SUM([tblBasket].[ticket_quantity]) AS History,
[tblTickets].[price],
[tblTickets].[availability]
FROM [tblTickets]
LEFT JOIN [tblEvents]ON [tblEvents].[id] = [tblTickets].[event_id]
LEFT JOIN [tblStands]ON [tblStands].[id] = [tblTickets].[stand_id]
LEFT JOIN [tblBookingDates]ON [tblBookingDates].[id] = [tblTickets].
LEFT JOIN [tblTicketConcessions]ON [tblTicketConcessions].[id] = [tblTickets].[ticket_concession_id]
LEFT JOIN [tblBookingQuantities] AS tblBookingMinQuantities ON [tblBookingMinQuantities].[id] = [tblTickets].[booking_min_quantity_id]
LEFT JOIN [tblBookingQuantities] AS tblBookingMaxQuantitiesON [tblBookingMaxQuantities].[id] = [tblTickets].[booking_max_quantity_id]
LEFT JOIN [tblAdmissionDates]ON [tblAdmissionDates].[id] = [tblTickets].[admission_date_id]
LEFT JOIN [tblMemberships]ON [tblMemberships].[id] = [tblTickets].[membership_id]
LEFT JOIN [tblQuotas]ON
([tblQuotas].[event_id] = [tblTickets].[event_id] OR [tblQuotas].[event_id] IS NULL) AND
([tblQuotas].[stand_id] = [tblTickets].[stand_id] OR [tblQuotas].[stand_id] IS NULL) AND
([tblQuotas].[admission_date_id] = [tblTickets].[admission_date_id] OR [tblQuotas].[admission_date_id] IS NULL) AND
([tblQuotas].[concession_id] = [tblTickets].[ticket_concession_id] OR [tblQuotas].[concession_id] IS NULL) AND
([tblQuotas].[membership_id] = [tblTickets].[membership_id] OR [tblQuotas].[membership_id] IS NULL) AND
([tblQuotas].[ticket_id] = [tblTickets].[id] OR [tblQuotas].[ticket_id] IS NULL)
[B]LEFT JOIN [tblBasket] ON [tblBasket].[ticket_id] = [tblTickets].[id]
LEFT JOIN [tblOrders] ON [tblOrders].[id] = [tblBasket].[order_id]
WHERE 1=1
AND ([tblTickets].[ticket_open] = 1)
AND (([tblEvents].[id] = @eventId OR @eventId = 0)AND ([tblEvents].[event_open] = 1))
AND (([tblStands].[id] = @standId OR @standId = 0)AND ([tblStands].[stand_open] = 1))
AND (([tblAdmissionDates].[id] = @admissionDateId OR @admissionDateId = 0)AND ([tblAdmissionDates].[date_open] = 1))
AND ([tblTicketConcessions].[id] = @concessionId OR @concessionId = 0)
AND ((getdate() BETWEEN [tblBookingDates]. AND [tblBookingDates].[booking_end_date]) OR ([tblBookingDates].[booking_start_date] IS NULL AND [tblBookingDates].[booking_end_date] IS NULL))
AND (([tblMemberships].[id] IN (SELECT [membership_id] FROM [tblUsers_Memberships] WHERE [user_id]=@userId)) OR [tblMemberships].[id] IS NULL)
[B]AND ([tblOrders].[user_id] = @userId OR @userId=0)
GROUP BY
[tblTickets].[id],
[tblEvents].[id],
[tblStands].[id],
[tblAdmissionDates].[id],
[tblEvents].[event_name],
[tblStands].[stand_name],
[tblTicketConcessions].[concession_name],
[tblMemberships].[membership_name],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblBookingMinQuantities].[booking_quantity],
[tblBookingMaxQuantities].[booking_quantity],
[tblTickets].[price],
[tblTickets].[availability]
GO
Except... there's two problems with it. One is that it only returns tickets that you've already bought, the other is that it doens't work out correctly how many of those tickets you've bought in past orders.
This is what's in tblBasket:
idticket_idquantityorder_iddate
152321/03/2006
262321/03/2006
3144421/03/2006
4154421/03/2006
551421/03/2006
Both the orders in there are for the same user id: "1". All the tickets in there are tied to event "2".
When I run Exec dbo.getAvailableTickets 2,0,0,0,1, it tells me it's found 6 of ticket 5, 4 of ticket 6 and 12 of ticket 14. And I can't for the life of me figure out how it's calculating it. Any ideas?
And how do i get it to return all tickets regardless of whether you've bought them previously or not?
View 4 Replies
View Related
Aug 22, 2006
I have a query that returns results based on information in several tables. The problem I am having is that is there are no records in the one table it doesn't return any information at all. This table may not have any information initially for the employees so I need to show results whether or not there is anything in this one table.
Here is my select statement:
SELECT employee.emp_id, DATEDIFF(mm, employee.emp_begin_accrual, GETDATE()) * employee.emp_accrual_rate -
(SELECT SUM(request_duration) AS daystaken
FROM request) AS daysleft, employee.emp_lname + ', ' + employee.emp_fname + ' ' + employee.emp_minitial + '.' AS emp_name,
department.department_name, location.location_name
FROM employee INNER JOIN
request AS request_1 ON employee.emp_id = request_1.emp_id INNER JOIN
department ON employee.emp_department = department.department_id INNER JOIN
location ON department.department_location = location.location_id
GROUP BY employee.emp_id, employee.emp_begin_accrual, employee.emp_accrual_rate, employee.emp_fname, employee.emp_minitial,
employee.emp_lname, department.department_name, location.location_name
ORDER BY location.location_name, department.department_name, employee.emp_lname
The section below is the part that may or may not contain information:
SELECT (SELECT SUM(request_duration) AS daystaken
FROM request) AS daysleft
So I need it to return results whether this sub query has results or not. Any help would be greatly appreciated!!!
TIA
View 3 Replies
View Related
Jul 10, 2007
Hi, I was wondering if any SQL Server gurus out there could help me...I
have a table which contains text resources for my application. The text
resources are multi-lingual so I've read that if I add a html language
indicator meta tag e.g.<META NAME="MS.LOCALE" CONTENT="ES">and
store the text in a varbinary column with a supporting Document Type
column containing ".html" of varchar(5) then the full text index
service should be intelligent about the language word breakers it
applies when indexing the text. (I hope this is correct technique for
best multi-lingual support in a single table?)However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.DECLARE @SearchWord nvarchar(256)SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.Any pointers / suggestions would be greatly appreciated. Cheers,Gavin.
View 1 Replies
View Related
Jul 10, 2007
Hi, I was wondering if any SQL Server gurus out there could help me...
I have a table which contains text resources for my application. The text resources are multi-lingual so I've read that if I add a html language indicator meta tag e.g.
<META NAME="MS.LOCALE" CONTENT="ES">
and store the text in a varbinary column with a supporting Document Type column containing ".html" of varchar(5) then the full text index service should be intelligent about the language word breakers it applies when indexing the text. (I hope this is correct technique for best multi-lingual support in a single table?)
However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.
DECLARE @SearchWord nvarchar(256)
SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.
SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)
I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.
Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.
View 1 Replies
View Related
Feb 13, 2004
Hi, have configured an ODBC linked server for an Adaptive Server Anywhere (ASA6.0) database.
I have to write a function (not a procedure) that receives a number (@Code) and returns 1 if it was found on a table in the linked server, or 0 if not. Looks very simple...
One problem, is that the queries on a linked-server must be made through the OPENQUERY statement, which doesen't support dynamic parameters. I've solved this making the whole query a string, and executing it, something like this:
SET @SQL='SELECT * FROM OPENQUERY(CAT_ASA, ''SELECT code FROM countries WHERE code=' + @Code + ''')'
EXEC sp_executesql @SQL
(CAT_ASA is the linked-server's name)
Then, i would use @@ROWCOUNT to determine if the code exists or not. But before this, a problem appears: sp_executesql is not allowed within a function (only extended procedures are allowed).
Does somebody know how to make what i want?? I prefer to avoid using temporary tables.
Thanks!
View 3 Replies
View Related
Jun 13, 2007
Hi,
I'm trying to calculate some leagues for a website i run usuing some quite complicated querys. As the leagues are calculated with such somplicated criteria, i've had to build the leagues inot a temporary table.
What i need to be able to do is update the temp table with the results of a group by query. This gives me an error and the only way i have found to achieve this is to insert the results of a group by into another temp table, and then use that to perfom the update.
Is there something i'm missing, or is this the only way to achieve my goal ?
Thanks in advance.
View 3 Replies
View Related
Jun 12, 2008
Hi, I am seeking a hopefully easy solution to spit back an error message when a user receives no results from a SQL server db with no results. My code looks like this What is in bold is the relevant subroutine for this problem I'm having. Partial Class collegedb_Default Inherits System.Web.UI.Page Protected Sub submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit.Click SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] WHERE [name] like '%" & textbox1.Text & "%'" SqlDataSource1.DataBind() If (SqlDataSource1 = System.DBNull) Then no_match.Text = "Your search returned no results, try looking manually." End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] ORDER BY [name]" SqlDataSource1.DataBind() End Sub Protected Sub reset_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles reset.Click SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] ORDER BY [name]" SqlDataSource1.DataBind() End SubEnd Class I'm probably doing this completely wrong, I'm a .net newb. Any help would be appreciated. Basically I have GridView spitting out info from a db upon Page Load, but i also have a search bar above that. The search function works, but when it returns nothing, I want an error message to be displayed. I have a label setup called "no_match" but I'm getting compiler errors. Also, next to the submit button, I also have another button (Protected sub reset) that I was hoping to be able to return all results back on the page, similar to if a user is just loading the page fresh. I'd think that my logic would be OK, by just repeating the source code from page_load, but that doens't work.The button just does nothing. One final question, unrelated. After I set this default.aspx page up, sorting by number on the bottom of gridview, ie. 1,2,3,4, etc, worked fine. But now that paging feature, as long with the sorting headers, don't work! I do notice on the status bar in the browser, that I receive an error that says, "error on page...and it referers to javascript:_doPostBack('GridView1, etc etc)...I have no clue why this happened. Any help would be appreciated, thanks!
View 2 Replies
View Related
Jan 18, 2003
Two tables: CompanyPrices(CompanyID, ProductID, Price), CompanyRegion(CompanyID, Region)
ProductID is the primary key.
I want to get 10 smallest prices in each Region. In other words, I am looking for 10 cheapest prices in each region. So, if there are 20 regions, I should get excatly 200 rows having prices for products from 200 companies if there were at least 10 companies in each region.
I tried the follwoing, but get incorrect results.
select S1.Region, S1.Price from (select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S1 inner join
(select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S2 on S1.Region = S2.Region
group by S1.Region, S1.Price having count(*)<=10 order by S1.Region, S1.Price
However, if I want to get 10 cheapest products for each company, the above sql works by modifying the join condition. Instead of S1.Region = S2.Region , I use S1.CompanyID = S2.CompanyID and I get correct results for 10 cheapest products for each company.
select S1.CompanyID, S1.Price from (select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S1 inner join
(select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S2 on S1.CompanyID = S2.CompanyID
group by S1.CompanyID, S1.Price having count(*)<=10 order by S1.CompanyID, S1.Price
I am not sure what is wrong in the first query and why it does not work when the second one works. Could someone help in making the first query work to give me correct results?
View 2 Replies
View Related
Apr 4, 2012
I need to put the serial numbers for results in group in SQL Server 2000. Please see below:
My input:
procedureid procname
1 A
1 B
2 A
2 B
2 C
2 D
3 A
3 B
3 C
Output I need:
procedureid procname serial_num
1 A 1
1 B 2
2 A 1
2 B 2
2 C 3
2 D 4
3 A 1
3 B 2
3 C 3
Here is my table:
create table po(
procedureid int,
procname varchar(10),
)
insert into po values (1,'A')
insert into po values (1,'B')
[Code] ....
View 11 Replies
View Related
Jun 15, 2015
I have to use a Group By in Sub query that will give me my desired results.
SELECT count(hc), CS, S_W, (SELECT COUNT(Reg_Temp)
FROM CS_S
WHERE Reg_Temp = "Reg") as [RegOnly]
FROM CS_S
GROUP BY S_W, CS
ORDER By CS, S_W
The query I have above counts ALL the Reg, I'd want it to give only the count that I'd get by using Group By clause i.e. S_W and CS.
View 8 Replies
View Related
Jun 4, 2015
I have a query that pulls back task and user assigned. Each task can have multiple users assigned. I want to pull back the single task and all the users assigned in one row.
Current Query:
select
t.Name 'Task',
d.FirstName + d.LastName 'User'
from [dbo].[Tasks_TemplateAssignTo] a join
Task_Template t on a.template_id = t.ID join
Doctor d on d.id = a.provider_id
Results from query above:
TaskUser
Call CustomerJohn Smith
Call CustomerBetty White
Call CustomerTammy Johnson
Order suppliesGreg Bullard
Order suppliesJosephine Gonzalez
Expected Results:
TaskUser
Call CustomerJohn Smith, Betty White, Tammy Johnson
Order SuppliesGreg Bullard, Jospehine Gonzalez
View 4 Replies
View Related
Aug 20, 2007
I am trying to do a select statement and input the result to a different table how can this be done in one step? Now I am just coping to excel and importing back in this is a real pain.
Select Trip, Destination, LeaveDate, LeaveTime, ReturnDate, ReturnTime, Comment, RescheduleDate from Trips
Group by Trip, Destination, LeaveDate, LeaveTime, ReturnDate, ReturnTime, Comment, RescheduleDate
Order by LeaveDate, LeaveTime, Trip
View 5 Replies
View Related
Jul 17, 2013
I have a table of attributes set up as follows:
ID, Value, Group
1, Football, Sports
1, Baseball, Sports
1, Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
etc.
I want a query that will combine that values for each ID into one field per group. So if ID 1 has multiple sports but also a greek attribute, they end up with two rows; the first row containing the combined sports values and the second row the greek valued not combined, because there was only one value in that group for that ID. For example:
ID, Combined Values, Group
1, Football Baseball Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
View 5 Replies
View Related
Nov 29, 2007
Hello,
I really hope that someone can help me or at least point me in the right direction. I am selecting a set of data and using the date values across the X axis. However the needs exists to group these by week, but these weeks are not the normal weeks, for - they exist as follows the month starts on the first Monday of a month, for example December 2007 starts on Monday the 3rd and the week ends on the 6th of December a so on till the fact that the last week of the month December 2007 starts on Monday the 31st and ends on January the 6th is there any way that I can create a group that could group the datetime values together in this way,
This is not best achieved in SSRS where should I be creating these groups. Any help would really be appreciated.
Many Thanks
Olaf Dedig
View 1 Replies
View Related
May 28, 2008
Below is the code. It gives 2 errors.
1 @StartDate must be defined (it is a report parameter)
2 I cannot seem to get this to create a 5 character field (yy/mm) so I can group count results by this field (Along with all the other queried field)
Help will be appreciated. DECLARE @t TABLE (Owner nvarchar(5), cdate nvarchar(7), status nvarchar(10), jtype nvarchar(5))
DECLARE @sowners nvarchar(5)
DECLARE @mydate datetime
DECLARE @sstatus nvarchar(10)
DECLARE @sjtype nvarchar(5)
DECLARE @chardate nvarchar(7)
DECLARE @Jmonth Int
DECLARE @Jyear Int
DECLARE @Jcharyear nvarchar(4)
DECLARE @Jcharmonth Nvarchar(2)
DECLARE jobcur CURSOR FAST_FORWARD READ_ONLY FOR SELECT Owners, createdate, UserField2, Jobtype
FROM Requirements
WHERE (((Owners IS NOT NULL) AND (Owners <> 'Par')) AND (CreateDate >= @StartDate))
OPEN JobCur
FETCH NEXT FROM JobCur INTO @sowners, @mydate, @sstatus, @sjtype
WHILE @@FETCH_STATUS = 0
BEGIN
SET @Jyear = (Year(@mydate))
SET @Jmonth = (Month(@mydate))
SET @Jcharyear = CAST(@Jyear,4)
SET @Jcharmonth = CAST(@Jmonth,2)
IF Len(Jcharmonth) = 1
BEGIN
SET Jcharmonth = '0' + Jcharmonth
END
IF @Jmonth >= 10
BEGIN
SET @chardate = @Jyear + '/' + @Jmonth
END
IF @Jmonth < 10
BEGIN
SET @chardate = @Jyear + '/0' + @Jmonth
END
INSERT INTO @t (Owner, cdate, status, jtype)
VALUES (@sowners,@chardate,@sstatus,@sjtype)
FETCH NEXT FROM jobcur INTO @sowners, @mydate, @sstatus, @sjtype
END
CLOSE jobcur
DEALLOCATE jobcur
BEGIN
SELECT * FROM @t
END
View 6 Replies
View Related
Oct 1, 2015
I have a query that returns the data about test cases. Each test case can have multiple bugs associated to it. I would like a query that only returns the test cases that have all their associated bugs status = closed.For instance here is a sample of my data
TestCaseID TestCaseDescription BugID BugStatus
1 TestCase1 1 Closed
2 TestCase1 2 Open
3 TestCase2 11 Closed
4 TestCase2 12 Closed
5 TestCase2 13 Closed
How can I limit this to only return TestCase2 data since all of that test case's bugs have a status of closed.
View 3 Replies
View Related
Jun 20, 2006
I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3. string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE a.RegionCode = b.RegionCode"; 5. DataSet dsMarketList = new DataSet();6. SqlConnection sqlConn = new SqlConnection(intranetConnStr); 7. SqlCommand cmd = new SqlCommand(sql,sqlConn);8. sqlConn.Open();9. SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10. try11. {12. adapter.Fill(dsMarketList);
13. String bling = adapter.SelectCommand.CommandText;//BRG 14. dsMarketList.DataSetName="RegionMarket"; 15. dsMarketList.Tables[0].TableName = "MarketList"; 16. dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to 17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18. // from the SQL query 19. } 20. catch(Exception e) 21. { 22. // Handle the exception (Code not shown)
View 2 Replies
View Related
Sep 29, 2015
I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
View 4 Replies
View Related
