I'm trying to make sure that a user does not allocate more to funds than they have to payments. Here is what my stored procedure looks like now: I listed th error below
SELECT (SUM(tblReceiptsFunds.Amount_allocated) + @Amount_allocated) AS total_allocations, Sum(tblReceipts.AmountPaid) as total_payments
FROM tblReceiptsFunds INNER JOIN
tblReceipts ON tblReceiptsFunds.Receipt_ID = tblReceipts.Receipt_ID
WHERE tblReceipts.Payment_ID=@Payment_ID
IF (total_allocations<total_payments)
INSERT INTO tblReceiptsFunds ([Receipt_ID],[Fund_ID],[Amount_allocated],DateEntered,EnteredBy)
ELSE BEGIN
PRINT 'You are attempting to allocate more to funds than your total payment.'
END I get the following error when I try and save the stored procedure:
Msg 207, Level 16, State 1, Procedure AddNewFundAllocation, Line 26
Invalid column name 'total_allocations'.
Msg 207, Level 16, State 1, Procedure AddNewFundAllocation, Line 26
Hi, I am having trouble inserting 2 fields in a row using a stored procedure. This works fine: Exec ('Insert Into NumbersPull (Number)'+ @SQL) but when I try to insert another value into field 2 it errors out: I try this: Exec ('Insert Into NumbersPull (Number,resultID) Select ('+ @SQL + '),' + @resultID' ) and get this error: ERROR: Line 2: Incorrect syntax near ')'. Thanks, Doug
Having problem do INSERT values to my SQL DB with an StoredProcedure. SELECT works fine. My StoredProcedure : CREATE PROCEDURE insert_test @id int ,@Rubrik char(25), @Info char(60) , @Datum datetime ASINSERT INTO test_news(ID, Rubrik, Info, Datum) VALUES (@id, @Rubrik, @Info, @Datum)GO The StoredProcedure works fine in the SQL Query Analyzer
My Code; int num= 1234; string rub = "KLÖKÖLKÖLKÖL"; string ino = "slökdjfkasdkfjsdakf";SqlConnection myConnection = new SqlConnection("server='SOLDANER\DAER'; trusted_connection=true; database='SeWe'"); SqlCommand myCommand = new SqlCommand("insrt_test", myConnection); myCommand.CommandType = CommandType.StoredProcedure; myCommand.Parameters.Add( "@id",num);myCommand.Parameters.Add( "@Rubrik",rub );myCommand.Parameters.Add( "@Info", ino);myCommand.Parameters.AddWithValue( "@Datum", DateTime.Now ); Even tried AddWithValues Dont get any error.....
OK I have a stored procedure that inserts information into a database table. Here is what I have so far: I think I have the proper syntax for inserting everything, but I am having problems with two colums. I have Active column which has the bit data type and a Notify column which is also a bit datatype. If I run the procedure as it stands it will insert all the information correctly, but I have to manually go in to change the bit columns. I tried using the set command, but it will give me a xyntax error implicating the "=" in the Active = 1 How can I set these in the stored procedure?1 SET ANSI_NULLS ON 2 GO 3 SET QUOTED_IDENTIFIER ON 4 GO 5 -- ============================================= 6 -- Author:xxxxxxxx 7 -- Create date: 10/31/07 8 -- Description:Insert information into Registration table 9 -- ============================================= 10 ALTER PROCEDURE [dbo].[InsertRegistration] 11 12 @Name nvarchar(50), 13 @StreetAddress nchar(20), 14 @City nchar(10), 15 @State nchar(10), 16 @ZipCode tinyint, 17 @PhoneNumber nchar(20), 18 @DateOfBirth smalldatetime, 19 @EmailAddress nchar(20), 20 @Gender nchar(10), 21 @Notify bit 22 23 AS 24 BEGIN 25 -- SET NOCOUNT ON added to prevent extra result sets from 26 -- interfering with SELECT statements. 27 SET NOCOUNT ON; 28 29 INSERT INTO Registration 30 31 (Name, StreetAddress, City, State, ZipCode, PhoneNumber, DateOfBirth, EmailAddress, Gender, Notify) 32 33 VALUES 34 35 (@Name, @StreetAddress, @City, @State, @ZipCode, @PhoneNumber, @DateOfBirth, @EmailAddress, @Gender, @Notify) 36 37 --SET 38 --Active = 1 39 40 END 41 GO
I'm trying to insert the details in the "registration form" using stored procedure to my table. My stored procedure is correct, but I dunno what is wrong in my code or I dunno whether I've written correct code. My code is below. Please let me know what is wrong in my code or my code is itself wrong..... protected void RegisterSubmitButton_Click(object sender, EventArgs e) { SqlConnection conn = new SqlConnection("Server=ACHUTHAKRISHNAN; Initial Catalog=classifieds;Integrated Security=SSPI"); SqlCommand cmd; cmd = new SqlCommand("registeruser", conn); SqlParameter par = null; par= cmd.Parameters.Add("@fname", SqlDbType.VarChar, 30); par.Value = RegisterFirstNameTextBox; par = cmd.Parameters.Add("@lname", SqlDbType.VarChar, 30); par.Value = RegisterLastNameTextBox; par = cmd.Parameters.Add("@uname", SqlDbType.VarChar, 30); par.Value = RegisterUserNameTextBox; par = cmd.Parameters.Add("@pwd", SqlDbType.VarChar, 20); par.Value = RegisterPasswordTextBox; par = cmd.Parameters.Add("@email", SqlDbType.VarChar, 40); par.Value = RegisterEmailAddressTextBox; par = cmd.Parameters.Add("@secque", SqlDbType.VarChar, 50); par.Value = RegisterSecurityQuestionDropDownList; par = cmd.Parameters.Add("@secans", SqlDbType.VarChar, 40); par.Value = RegisterSecurityAnswerTextBox; try { conn.Open(); cmd.ExecuteNonQuery(); } catch (Exception ex) { throw new Exception("Execption adding account. " + ex.Message); } finally { conn.Close(); } }
Hi, I have two tables "people' and "dept". What I need is a stored procedure to insert into both tables. I need first, insert into "people" table, and then, insert into "dept" table since the first insert returns people id(peo_id), which is an input parameter for "dept" table. Here is my stored procedure, but I got error:Create PROCEDURE [dbo].[insert_people] @peo_last_name varchar(35), @peo_mid_initial varchar(1) = null,@peo_first_name varchar(10), @peo_address1 varchar(50) = null, @peo_city varchar(30) = null, @peo_state varchar(2) = null, @peo_zip varchar(10) = null, @peo_ph1 varchar(30) = null, @peo_ph2 varchar(30) = null, @peo_email varchar(40) = null, @dept_id int, @peo_id int
AS SET @peo_id = (INSERT INTO people (peo_last_name, peo_mid_initial, peo_first_name, peo_address1, peo_city, peo_state, peo_zip, peo_ph1, peo_ph2, peo_email) VALUES (@peo_last_name, @peo_mid_initial, @peo_first_name, @peo_address1, @peo_city, @peo_state, @peo_zip, @peo_ph1, @peo_ph2, @peo_email)) INSERT INTO dept (dept_id, peo_id) VALUES (@dept_id, @peo_id) GO Could somebody help out? Thanks a lot!
I have a table with UserID, UserName, UserPassword I have a stored procedure as follows:ALTER PROCEDURE UserInsert @UserName varchar(50), @UserPassword varchar(50) AS BEGIN INSERT Users (UserName, UserPassword) VALUES (@UserName, @UserPassword) END I have a GridView bound to the Users Table and seperate textboxes (UserName, UserPassword) on a webform. Couple of Questions... 1. how and/or what code do I use to execute the Stored Procedure to insert what is in the textboxes into the Table using a button click event? 2. Since UserID is autogenerated on new records....does UserID need to be in the code? Many Thanks
Hi, I need to insert a new user if the user (user_login) does not exist in the table (abcd_user) using a stored procedure. I created a stored procedure called "insert_into_abcd_user". Here is the complete strored procedure... CREATE PROCEDURE [dbo].[insert_into_abcd_user] ( @first_name [VARCHAR](30), @last_name [VARCHAR](30), @email [VARCHAR](60), @user_login [VARCHAR](50)) AS INSERT INTO [dbo].[abcd_USER] ([first_name], [last_name], , [user_login])VALUES (@first_name, @last_name, @email, @user_login) I need to to insert a new user if the user (user_login) does not exist int the table (abcd_User). Any one shade on my code? I appreciate your help in advance.
INSERT INTO Table_1 SELECT Source_Table.Field_1, Source_Table.Field_2, Source_Table.Field_3, ???? OUTPUT parameter returnet from a stored procedure ??????? FROM Source_Table
I have created a stored procedure which simply inserts two records into a table. Here is my stored procedure:- //BEGIN ALTER PROCEDURE [dbo].[pendingcol] @cuser varchar(100) AS Declare @sqls nvarchar(1000)
This is the code i am using to call my stored procedure using VB.NET:- //BEGIN 'variables Dim user As String user = Profile.UserName
'connection settings Dim cs As String cs = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|friends.mdf;Integrated Security=True;User Instance=True" Dim scn As New SqlConnection(cs)
'parameters Dim cmd As New SqlCommand("pendingcol", scn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@cuser", SqlDbType.VarChar, 1000) cmd.Parameters("@cuser").Value = user
'execute scn.Open()
cmd.ExecuteNonQuery()
scn.Close() //END
Now when i execute this code i get an error point to cmd.ExecuteNonQuery() that says " The name "recordone" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted. "
As far as i can see theres nothing wrong with the VB code, im guessing that the problem lies somewhere in my stored proc!
Can anyone please enlighten me on where i may be going wrong? Cheers
Hello, I have created a web page with a FormView that allows me to add and edit data in my database. I configured the SqlDataSource control and it populated the SELECT, INSERT, UPDATE and DELETE statements. I've created a stored procedure to do the INSERT and return to new identity value. My question is this: Can I configure the control to use this stored procedure? If so, how? Or do I have to write some code for one of the event handlers (inserting, updating???) Any help would be appreciated. -brian
So I have simply procedure: Hmmm ... tak sobie myślę i ...
Czy dałoby radę zrobić procedurę składową taką, że pobiera ona to ID w ten sposob co napisalem kilka postow wyzej (select ID as UID from aspnet_users WHERE UserID=@UserID) i nastepnie wynik tego selecta jest wstawiany w odpowiednie miejsca dalszej procedury ?[Code SQL]ALTER procedure AddTopic @user_id int, @topic_katId int, @topic_title nvarchar(256), @post_content nvarchar(max)as insert into [forum_topics] (topic_title, topic_userId,topic_katId) values (@topic_title, @user_id, @topic_katId) insert into [forum_posts] (topic_id, user_id,post_content) values (scope_identity(), @user_id, @post_content)Return And I want to make something more. What I mean - in space of red "@user_id" I want something diffrent. I make in aspnet_Users table new column uID which is incrementing (1,1). In this way I have short integer User ID (not heavy GUID, but simply int 1,2,3 ...). I want to take out this uID by this :SELECT uID from aspnet_Users WHERE UserId=@UserId.I don't know how can I put this select to the stored procedure above. So I can have a string (?) or something in space of "@user_id" - I mean the result of this select query will be "@user_id". Can anyone help me ? I tried lots of ways but nothing works.
I'm doing this more as a learning exercise than anything else. I want to write a stored procedure that I will pass a key to it and it will look in the database to see if a row exists for that key. If it does, then it needs to update the row on the DB, if not, then it needs to insert a new row using the key as an indexed key field on the database.for starters can this even be done with a stored procedure?if so, can someone provide some guidance as to how?thanks in advance,Burr
In my stored procedure I need to select some data columns and insert them into a #temp tbl and then select the same data columns again using a different from and put them into the same #temp tbl. It sounds like a union, can I union into a #temp tbl? Any help here is appreciated.
Want help in creating the stored procedure of company where id is the PrimaryKey in the table companymaster which is created in sql server 2005.1 ALTER PROCEDURE companyinsert 2 3 @companyid int, 4 @companyname varchar(20), 5 @address1 varchar(30) 6 7 AS 8 9 INSERT INTO companymaster 10 ( companyname, address1) 11 VALUES (@companyname,@address1) Procedure or Function 'companyinsert' expects parameter '@companyid', which was not supplied.
The id is to be created autogenerate in the sequence number.There should be no duplicated companyname with different ids in same table.Apart from the above error can anyone pls give me or tell me the code or modify the stored procedure according to the above..thanxs....
Feeling really dumb tonight - below is my stored procedure and code behind which completes (it puts "completed" in TextBox4) but does not insert anything into database. Questions:1) do in need to include the primary key field in the insert stored procedure?2) do I need a DataAdapter to actually get it running and open and close the connection? STORED PROCEDURE running on SQL 2000 server: ______________________________________ CREATE PROCEDURE newuser003.InsertCompanyInfo @CS_CompanyName nchar(100),@CS_City nchar(500),@CS_Phone varchar(20) AS INSERT into tblCompanyInfo_Submit(CS_CompanyName, CS_City, CS_Phone)VALUES ('@CS_CompanyName', '@CS_City', '@CS_Phone')RETURN C# CODE BEHIND: ______________________________________________________ public partial class ContractorSubmision : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { } protected void Button1_Click(object sender, EventArgs e) { SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString); SqlCommand cmd = new SqlCommand("CompanyInfoSubmit", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@CS_CompanyName", TextBox1.Text); cmd.Parameters.AddWithValue("@CS_City", TextBox2.Text); cmd.Parameters.AddWithValue("@CS_Phone", TextBox3.Text); TextBox4.Text = "Completed"; }}
Hello, I am having an issue with the insert command in a stored procedure in SQL Server 2005. The procedure is designed to generate a Customer number and insert an initial value (a delivery charge) into an order table. Finally, it returns the customer number back to the caller. When I execute the stored procedure from SQL Server Management Studio, it works perfectly. However, when I call it from ASP.net, the procedure properly generates a Customer Number and returns it to my application, but the insert never takes place. Can someone help me figure out why it won't insert? My ASP.Net (C#) code is here: SqlDataSource dsSelect = new SqlDataSource(); dsSelect.ConnectionString = ConfigurationManager.ConnectionStrings["obeConn"].ConnectionString; dsSelect.SelectCommandType = SqlDataSourceCommandType.StoredProcedure; dsSelect.SelectCommand = "getTempCustNo";
Hi, I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
ok I have a stored procedure...... I pass in the variables that are requried....What is the best way to add a record using my stored procedure in VB.net code in a button click event...... How might i do this with a data reader,,data adapter.....OR What.......................Do I need to declare all my varaibles I am adding to this new record in the line after POSCODE or can vb.net do this without a parameter statemetn
CREATE procedure dbo.Appt_AddAppt ( @ClinicID int, @AccountNum nvarchar(10), @DOS nvarchar(12), @POSCODE nvarchar(5) ) as Insert into Clinic_Appointments (ClinicID,AcctNumber,DateOfService,PlaceOfService,PlaceOfServiceID) Values (@ClinicID,@AccountNum,@DOS,@POSCODE,@ClinicID)
I am trying to take some SQL queries written by Visual Studio, one insert and one update and combine them into a single stored procedure. The insert procedure should be included in the update procedure and a check should be done for an existing record based upon the primary key. If it exist, an update command should be performed, else an insert. I also need to wrap the procedure in a transaction and rollback if any errors have occurred, else commit the transaction. If I have the following Insert and Update statements, can anyone help me write the stored procedure I need? Again, the current statements were automatically created and could be modified as needed.
INSERT INTO tblClub(ClubPKID, ClubName) VALUES (@ClubPKID, @ClubName); SELECT ClubPKID, ClubName FROM tblClub WHERE (ClubPKID = @@IDENTITY)
UPDATE tblClub SET ClubPKID = @ClubPKID, ClubName = @ClubName WHERE (ClubPKID = @Original_ClubPKID) AND (ClubName = @ClubName); SELECT ClubPKID, ClubName FROM tblClub WHERE (ClubPKID = @ClubPKID)
Having a little trouble not seeing why this insert is not happening.... --snip-- DECLARE c_studId CURSOR FOR SELECT studentId FROM students FOR READ ONLY OPEN c_studId FETCH NEXT FROM c_studId INTO @studentId IF( @@FETCH_STATUS = 0 ) BEGIN SET @studRec = 'Found' END CLOSE c_studId DEALLOCATE c_studId BEGIN TRAN IF (@studRec <> 'Found') BEGIN INSERT INTO students (studentId) VALUES (@studentId) END Well, you get the idea, and I snipped a lot of it.Why is it not inserting if the user is not found?Thanks all,Zath
I have a table that has data and is indexed by the Visit #. Each month I receive new data from a text file that I have to import into this table. On all occasions the text file will have one of the existing Visit #'s contained in it.
I wrote a simple stored procedure that has the INSERT/SELECT statement but the problem I am having is when I execute the Stored Procedure and I run into a record from the text file that already exist in my table the stored procedure errors and stops at that point.
How do I write a stored procedure that will ignore that text record and continue reading the text file and insert records that do not exist?
I have a query that select rows from the employees,salary_head and salary_group tables this is the query SELECT dbo.salary_head.salary_group_id, dbo.salary_group.salary_group, dbo.salary_head.amount, dbo.grade_level.[level], dbo.employees.employ_name, dbo.employees.work_id, dbo.employees.company_id, dbo.employees.designation, dbo.salary_head.level_id, dbo.employees.terminate, dbo.employees.banks_id, dbo.employees.bank_account_no FROM dbo.employees INNER JOIN dbo.salary_head INNER JOIN dbo.salary_group ON dbo.salary_head.salary_group_id = dbo.salary_group.salary_group_id ON dbo.employees.level_id = dbo.salary_head.level_id INNER JOIN dbo.grade_level ON dbo.employees.level_id = dbo.grade_level.level_id i also have a table called payrollers1 with the following fields payroll_id int auto payperiod_id int employee_id level_id designation_id banks_id bankaccount_no salarygroup_id Amount I am trying to write a stored procedure that will run the above query and then insert the values of the employee_id,level_id,designation_id,salary_group_i d,amount rows into the payroller table. As for the payperiod_id i want the Stored procedure to look up the max payperiod value. I am totally new to stored procedure and do not know how to write this code. Can somebody help me with this code.
FoodID Integer PRIMARY KEY, FoodName varchar(255), FoodDesc text
How do I insert into this table while checking that the FoodName do not replicate? I'm aware that with a stored procedure I'm able to you the IF EXIST statement to help me solve this problem. But if I do not wish to use the stored procedure, am I able to create a SQL string to insert while checking the condition?
Thanks in advance to the people that replied to my request! Thanks so much...
Creating a stored procedure to insert records into multiple rows.
Let's say we have 3 colums in procedure to insert, col3 has a max limit of 1000, if col3 data exceeds limit it has insert into next row and vice versa.
Hi,is it possible to create an "INSERT INTO ..... "Select from storedprocedure" Query?I want to create an temporary table. In this table I want to enter the data,which I can get from an stored procedure.But in the FROM-clause a stored procedure is not allowed?
Firstly, I am new to sql so please excuse my ignorance!
I have a stored procedure that tests the import of about 100 text files. This is to screen for file errors prior to processing. The results for each file are held in a table. The procedure script is as follows:
<snip>
insert into st_fileimport (dealernumber, handheld_file) values ('01', 'Fail')
BULK INSERT dbo.filetesthandheld FROM 'c:inetpubwwwrootS_Datadealers 1foo.csv' WITH ( FIELDTERMINATOR = ',' , ROWTERMINATOR = '' , ROWS_PER_BATCH = 500 )
update st_fileimport set handheld_file = 'Pass' where dealernumber = '01'
</snip>
This is then repeated for each file. This works fine, but as soon as an error is encountered the script terminates which means that you need to re-run this procedure iteratively until all files pass.
Is there a way of structuring the stored procedure so it will fail on one import and then move onto the next? Or, a better methodology all together?
I tried to insert a row using a clr stored procedure where a field was a varbinary(max) and the data was a jpg file. The data was truncated to 8000 bytes. A similar T-SQL sp did not truncate the data even though the parameters were identical. With the clr sp I tried varbinary, variant and image for the parameter type. The variant gave an exception. The others worked but the data was truncated.
I used sqlpipe.executeandsend. Someone asked elsewhere if the pipe had an 8000 byte limit but was told it had not.
