Heterogeneous Queries Require The ANSI_NULLS And ANSI_WARNINGS Options To Be Set For
Sep 5, 2007
Hi,
I have a problem with linked servers.
I have an application running against a SQLServer 2005 Express. For some limitations, I had to access from the same application to another database, but I cannot change to another server.
So I have 2 created a second instances, where the first one refers the second one and I created synonyms in the first one to access to all the objects in the second one, to emulate a database in the first instances, but running on the second one. The final idea is to move to another server, but for the testing I use another instance.
But when I try to access to the aplication database, I hav the following error: Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.
I searched solutions for this issue, but I only found to add SET ANSI_NULLS ON and SET ANSI_WARNINGS ON to my connection, before the queries, but I can't, because I cannot change the application.
If anyone can help me, I'd be veri greatfull
Best regards, Ariel
View 2 Replies
ADVERTISEMENT
Nov 17, 2007
I have a SQL200 stored proc that gives me the error "Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query." when I try to execute it through the query analyzer.
I was able to create the stored proc fine but when I try to execute it through the query analyzer it gives me the above error. I do have Link Server select inside the stored proc. I have to turn of warnings inside the stored proc in order for it to not crash my vb6 recordset by putting in the SET ANSI_WARNINGS OFF
SET NOCOUNT OFF
SET ANSI_NULLS OFF
or else my vb6 recordset crashes.
When I created the sproc, I did what every one was telling me to do in the forums by putting in the
SET ANSI_WARNINGS ON
Go
SET NOCOUNT ON
GO
SET ANSI_NULLS ON
GO
CREATE Procedure usp_SprocName
AS
SET ANSI_WARNINGS OFF
SET NOCOUNT OFF
SET ANSI_NULLS OFF
Can someone help me?
View 4 Replies
View Related
Oct 19, 2006
I have stored procedure:
EXEC sp_addlinkedsrvlogin @FailedRegionServerName, 'false', NULL, 'sa', 'pass'
DECLARE @a varchar(100)
SET @a = @FailedRegionServerName + '.Ithalat.dbo.Product'
DECLARE @s varchar(100)
SET @s = ' SELECT * FROM ' + @a
EXEC ( @s )
When I execute it I get the error:
Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.
Then I put
SET ANSI_WARNINGS ON
SET ANSI_NULLS ON lines into the procedure. Also checked "Ansi Nulls" and "Ansi Warnings" in the properties of SQL Server. It didn't work
Then I tried:
DECLARE @s varchar(300)
SET @s = 'SET ANSI_WARNINGS ON; SET ANSI_NULLS ON; SELECT * FROM ' + @a
EXEC ( @s )
I still got the error.
WHAT SHOULD I DO? HOW CAN I GET A TABLE CONTENT FROM A LINKED SERVER? Any will be appreciated, thanks a lot...
View 12 Replies
View Related
May 8, 2001
I have a Stored Procedure I am trying to run that joins to a remote database. I am able to see everything in the QA just fine with this (courtesy of Anatha):
SELECT DISTINCT a.*
FROM LOCATION a,
LinkServer.MC_Card.webuser.LOCATION b
WHERE a.location_number = b.location_number
But I am trying to run this query in Stored Procedure(notice the 4-part name callout to the LinkedServer tables) which returns the error message:
Error 7405: Heterogeneous queries require ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.
Here is the Stored Procedure:
/****** Object: Stored Procedure dbo.spELRMCcardXtionByDate
Script Date: 4/24/2001 11:51:27 AM ******/
CREATE PROCEDURE dbo.spELRMCcardXtionByDate @dcid nvarchar(255), @startDate datetime, @endDate datetime
AS
-- declare @dcid nvarchar(255)
-- set @dcid = '1032'
SELECT STORE.[Str#], STORE.[Dcid#], E.card_number, E.program_number
, E.start_date, E.end_date, E.card_number, E.event_number
, E.status, E.budget, E.scheduled_date, P.tx_time, P.purchase_amount
, L.merchant_name
FROM (STORE INNER JOIN LinkServer.MC_Card.webuser.EVENT E ON STORE.[DemoID#] = E.event_number)
LEFT JOIN (LinkServer.MC_Card.webuser.LOCATION L RIGHT JOIN LinkServer.MC_Card.webuser.POS_TX P ON L.location_number = P.location_number)
ON E.event_number = P.event_number
WHERE (((STORE.[Dcid#])= @dcid)) AND E.scheduled_date BETWEEN @startDate AND @endDate
ORDER BY STORE.[Str#]
-- and E.card_number IS NOT NULL
GO
Any help greatly appreciated.
Thanks,
Bruce
View 2 Replies
View Related
May 14, 2001
I am trying to create a stored procedure that updates a table on another server. It give the me the error about requiring ANSI_NULLS and WARNINGS being set. How can I set these if they are not already set? I tried setting them within the stored procedure, but does not appear to be working. Unless I am doing something wrong. I am trying to add SET ANSI_NULLS ON and doing the same thing for WARNINGS. Any thougts or suggestion on what to do? Thanks for the help
View 2 Replies
View Related
Jul 20, 2005
When I perform a query on a linked Oracle server in the Query analyser Ihave noprboblem' to perform this query.However, when I create this query in a stored procedure I get a compilationerrorwhen saving this procedure. (Not when compiling; it has no errors)Server: Msg 7405, Level 16, State 1, Line 1Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS optionsto be set for the connection. This ensures consistent query semantics.Enable these options and then reissue your query.When I create a dynamic SQL statement then I can save this stored procedurewhen I run the stored procedure this same error happens.What do I have to do.Arno de Jong, The Netherlands
View 1 Replies
View Related
Oct 1, 2007
Hi, i have problem as subject says.
Db has table with 3 columns, ID, Key and Val. ID is primary key, Key has unique index and Val simple holds value in text format.
I have created DAL layer using .netTiers and CodeSmith. Generated procedures.sql has before every procedure set ANSI_NULLS to OFF.
When i read rows from table i print them on screen. When user changes value, that should also be updated in database.
When i select entity, its value is changed.
Here is code snipper.
Code Blockentity.Key = key;
entity.Value = value;
TransactionManager transactionManager = DataRepository.Provider.CreateTransaction();
try
{
transactionManager.BeginTransaction();
retVal = DataRepository.TestTableProvider.Update(entity);
transactionManager.Commit();
}
catch
{
transactionManager.Rollback();
throw;
}
I got an exception with message below:
UPDATE failed because the following SET options have incorrect settings: 'ANSI_NULLS'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
Also, class which hold previous code snipper supports caching, by using some kind of SqlCacheManager, which is above SqlCacheDependecy class. Database service broker is started by
Code Block
ALTER DATABASE <DB_NAME> SET ENABLE_BROKER
Server is SqlExpress 2005.
Application is in ASP.NET 2.0.
I also noticed next.
On first run, previous code passes without errors. On second run, update error appears.
This is log from sql server.
Code BlockQuery notification delivery could not send message on dialog '{822C7891-736E-DC11-836B-005056C00008}.'. Delivery failed for notification '<qn:QueryNotification xmlns:qn="http://schemas.microsoft.com/SQL/Notifications/QueryNotificationhttp://schemas.microsoft.com/SQL/Notifications/QueryNotification">http://schemas.microsoft.com/SQL/Notifications/QueryNotification</A< A>>" id="1" type="change" source="database" info="restart" database_id="13" sid="0xE7C0751C9F7F6C4D9423096BBCC7FB69"><qn:Message>edd3e2dd-11ed-4d92-a0f4-5c674a90aecf;8b2095663cc6a9c297120e4c94d488555e97e54d</qn:Message></qn:QueryNotification>' because of the following error in service broker: 'The conversation handle "822C7891-736E-DC11-836B-005056C00008" is not found.'
Need fast answer.
Thanks in advance.
View 5 Replies
View Related
Apr 2, 2001
hi,
i am trying to execute a query by joining two different tables..
one table is a local table and another one is a remote table..
The intresting thing is when i run the query from QUERY ANALYZER it works..
but if i execute the same from STORED PROCEDURE it gives me the following error.
Server: Msg 7405, Level 16, State 1, Line 1
Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.
thanks jessi.
View 1 Replies
View Related
Sep 3, 1999
Hi All,
Can someone please tell me what does this means. and How to solw this problem.
This is my procedure that I created.
CREATE PROCEDURE stp_Test @TableName varchar(50), @Id int out AS
DECLARE @String varchar(500)
SELECT @String = 'SELECT * INTO #TempTable FROM ServerName.Database.dbo.' + @TableName
EXEC sp_sqlexec @String
SELECT @id = max(ID) FROM #TempTable
GO
WHEN I run this Procedure.
EXEC stp_Test 'TableName', @Id out
I get this out put.
-------------------------------------------------------
SELECT * INTO #TempTable FROM ServerName.Database.dbo.TableName
(1 rows affected)
Server: Msg 7405, Level 16, State 1, Procedure stp_MaxNoReturn, Line 2
Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.
What is the solution to this problem.
Thanks in advance
Aziz
View 2 Replies
View Related
Jul 23, 2005
Hi Guys,I have one stored procedure on SQL 6.5 and retrieving data from SQL2000. I have defined a linked server on SQL 6.5. ButI am getting following error:-"Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS optionsto be set for the connection. This ensures consistent query semantics.Enable these options and then reissue your query."I dropped and re-create the stored procedure after adding the SETANSI_NULLS & SET ANSI_WARNINGS ON in stored procedure but still gettingthis error. I have created this sp on ISQL/W not in Enterprise Manager.Can anyone please let me know, how to fix this problem.ThanksAdnan
View 2 Replies
View Related
Nov 6, 1998
Hi everyone,
I have a table which have several fields. I have a field that is made required by mistake. I would like to change this field to not require. Can someone help with the syntax?
Any help is greatly appreciate.
View 1 Replies
View Related
Jun 4, 2002
I'm trying to write a stored proc and I'm getting this warning.
Any clue?
Khalid
View 1 Replies
View Related
Aug 31, 2005
Ok, here's my dilemma. We're running SQL Server 2000 with the defaultdb setting for the ANSI_WARNINGS option set to off. However, we stillget "Warning: Null value is eliminated by an aggregate or other SEToperation" messages. To eliminate getting the message, we use the SETANSI_WARNINGS OFF in our stored procs. Using that SET command forces arecompilation of the SP and is causing locks/blocking. Anybody elserun into this problem and if so, how have you handled it.Thanks,-Nate
View 1 Replies
View Related
Jul 20, 2005
I'm working with some long standing VB/SQL Server applications and forthe second time we've suffered from having the parameters to a storedprocedure call get silently truncated now that the data field has gotmuch larger than when the code was developed all those years ago. Thisis always very hard to debug and I'd really like SQL Server to throwan error when this happens.I don't feel confident enablying the full ANSI_WARNINGS as it islikely to affect lots of functionality in the database inunanticipated ways.What I'd like to be able to do is enable only the ANSI check for thestring data getting truncated but haven't been able to find a way todo this. Is it possible?CheersDave
View 3 Replies
View Related
Dec 12, 2001
I am using SQL server 7.0 and i have created oracle8i linked server(Using MSDAORA as provider) in it.
When i run distributed queries between SQl server and Oracle server it works fine.But when i try to run distributed transaction between two servers ( BEGIN DISTRIBUTED TRANSACTION..)it reports an error saying Distributed transactions are not supported by MSDAORA.
My question is; is it possible to run distributed transaction between SQL server and oracle server (where oracle server is a linked server in my SQL server)?
Actually i want to run this transaction in DTS package which updates and transfers data amongst various servers.
Thanx
Regards,
Rahul
View 1 Replies
View Related
Jul 23, 2005
My company is working on a bond derivative portfolio analysis tool andwe're facing a problem that I did not see adequately addressed anywhere in literature. I really did RTFM. I'm very experienced inrelational modelling (10+ years) so this is not a case of notunderstanding the principles. Here is the problem stripped ofirrelevant context. The problem below is simplified for the sake of theexample so don't sweat the details.THE PROBLEM1. There are many types of bonds, each type has a different set ofattributes, different attribute names, different attribute datatypes.For example, bond A has two variables: a yearly interest rate anddate of issue, B has five variables: an interest rate and 4 specificdates on which various portions of principal need to be paid, bond Chas a set of 4 variables: interest rate in period 1, interest rate inperiod 2, the date on which the bond can be put back to the issuer,and two dates on which the bond can be called by the issue. And so on.So, on the first attempt I could represent each bond type as its owntable. For example,create table bond_type_a (rate INTEGER, issue_date DATE)create table bond_type_b (rate INTEGER, principle_date1 DATE,principle_date2 DATE, principle_date3 DATE, principle_date4 DATE)create table bond_type_c (rate1 INTEGER, rate2 INTEGER, put_date DATE,call_date DATE)This is the nice relational approach but it does not work because:2. There are many thousands of bond types thus we would have to havemany thousands of tables which is bad.3. The client needs to be able construct the bond types on the flythrough the UI and add it to the system. Obviously, it would be bad ifeach new type of bond created in the UI resulted in a new table.4. When a user loads the bond portfolio it needs to be very fast. Inthe table per type approach if a user has a 100 different types if bondin the portfolio you would have to do 100 joins. This is a heavilymulti user environment so it's a non-starter. It's impossibly slow.THE SOLUTIONSSo now that we ditched the table per bond type approach we can considerthe followiing solutions (unpleasant from the relational point ofview):1. Name-Value pairs.create table bonds (bond_id INTEGER, bond_type INTEGER, attribute_idINTEGER, value VARCHAR(255))Comment: The client does not like this approach because they want torun various kinds of reports and thus they doe not want the values tobe stored as VARCHAR. They want the DB to enforce the datatype.2. Typed Name-Value pairs.create table bonds (bond_id INTEGER, bond_type INTEGER, attribute_idINTEGER, int_val INTEGER, string_val VARCHAR(255), date_val DATE_Comment: The client does not like this because the table is sparse.Every row has two empty fields.3. Link table with table per data type.create table bonds (bond_id INTEGER)create table bond_int_data (bond_id INTEGER REFERENCES bonds(bond_id),value INTEGER)create table bond_string_data (bond_id INTEGER REFERENCESbonds(bond_id), value VARCHAR(255))create table bond_date_data (bond_id INTEGER REFERENCES bonds(bond_id),value DATE)Comment: This meets most of the requirements but it just looks ugly.4. Dynamic Mappingcreate table (bond_id INTEGER, int_val1 INTEGER, int_val2 INTEGER,date_val1 DATE, date_val2 DATE, string_val1 VARCHAR(255), string_val2VARCHAR(255))Then you have to add some dynamic mapping in your code which willprovide bond specific mapping (say, stored in an XML file). Forexample,For bond_A: yearly_rate maps to int_val1, issue_date maps to date_val1For bond_C: rate1 maps to int_val1, rate2 maps to int_val2, put_datemaps to date_val1, call_date maps to date_val2)Comment: This is very good for performance because when I load aportfolio of different bond types I can pull them all in in one SELECTstatement. However this approach has a problem that the table issparse. The number of fields of each type has to be as high as toaccmodate the most complex bond while simple bonds will only be usingtwo or three.THE QUESTIONS:Are the four approaches I described above exhaustive? Are there anyother that I overlooked?
View 12 Replies
View Related
Sep 21, 2007
What does this mean and do?
SET ANSI_NULLS ON
View 2 Replies
View Related
Nov 26, 1999
Hi,
I figure that my query below should return the records that I've inserted into test1 and test2 after I turn ansi_nulls off for my session. But the query does not return any records. Any ideas?
create table test1 (id int, create_date datetime null)
create table test2 (id int, create_date datetime null)
insert test1 values (1,null)
insert test2 values (1,null)
set ansi_nulls off
select *
from test1 t1 join test2 t2 on t1.id = t2.id
where t1.create_date = t2.create_date
View 2 Replies
View Related
Nov 20, 2002
Could someone explain why these queries give two seemingly different
results?
set nocount on
set ansi_nulls off
create table #tmp1 ( col1 char(1) )
insert into #tmp1 values (null)
insert into #tmp1 values ('1')
select case when col1 <> '1' then 1 else 0 end from #tmp1
TIA...
View 5 Replies
View Related
Dec 2, 2007
does anyone know how to keep QA from adding the lines setting thesetwo options on and off along with blank lines at the beginning and endof every object you edit? i have searched quite a bit on this buthaven't been able to come up with anything.
View 1 Replies
View Related
Jan 24, 2007
Hi,
I'm setting up a heterogeneous transactional push replication with Sybase ASE 12.5.3 as subscriber. With management studio I try to create an procedure article with following properties
Copy extended properties : false
Destination object name : pGS_RefuseRequest
Destination object ownere : dbo
Action if name is in use : keep existing object unchanged
Replicate : Execution of the stored procedure
Create schemas at Subscriber : false
When I save the article and then the publication I got following error message:
Can not add artice 'pGS_RefuseRequest'.
Object was not found on server. Check if this object exists on the server. (Microsoft.SqlServer.Rmo)
That's realy strange because the wizard offered the procedure pGS_RefuseRequest in the list of possible articles.
Fortunatly I can create the article with following TSQL statement :
exec sp_addarticle @publication = N'RIGHTS_EDV_4T_pub'
, @article = N'pGS_RefuseRequest'
, @source_owner = N'dbo'
, @source_object = N'pGS_RefuseRequest'
, @type = N'proc exec'
, @description = N''
, @creation_script = N''
, @pre_creation_cmd = N'none'
, @schema_option = 0x00
, @destination_table = N'pGS_RefuseRequest'
, @destination_owner = N'dbo'
, @status = 0
go
Did anybody seen this bug before ?
It seems to be specific for heterogeneuous replication. In a pure MS environement the Wizard works fine!
Wolfgang Kunk
View 3 Replies
View Related
Jul 20, 2005
Hi All,I'm converting some stored procs from Sybase to SQL Server, and I'mhaving serious problems with Null comparisons.When I run the code below on Sybase, it returns both rows. When I runit on MS SQL Server, it returns nothing. I have set ANSI_NULLS off inthe code (and on the session through Query Analyzer), but it doesn'tseem to make any difference. Am I missing something?---------------set ANSI_NULLS offdrop table #TestNullcreate table #TestNull (Field1 varchar(10), Field2 varchar(10))insert into #TestNull values (1, null)insert into #TestNull values (1,1)declare @TestVar varchar(10)select @TestVar = Nullselect * from #TestNull where Field1 = @TestVar---------------Thanks in advance,Saul
View 4 Replies
View Related
Sep 6, 2006
Is there any way via T-SQL to run through a database and ensure that QUOTED_IDENTIFIER and ANSI_NULLS is set for all stored procs and functions etc on a database without having to recreate every proc / fn ?
The reason this is an issue is I'm trying to take advantage of indexed views to get a performance increase in an application - but not all of the procs/fn's have historically been created with ANSI_NULLS and QUOTED_IDENTIFIER set - so any proc that's not set correctly will fail once the indexed view has been created.
I could I suppose, script out all the procs / functions and do a bit of search and replace to ensure that these are set correctly by recreating all procs and functions - but I'm trying to avoid doing that as I've over 500 databases to upgrade - a metadata hack may be preferable.
Thoughts or comments or possible alternative approaches are welcome...
View 3 Replies
View Related
Jul 10, 2001
Im having trouble accessing a linked/remote server from a powerbuilder app.
I can run the stored proc from QueryAnalyzer, but from the app I get the error message - 'heterogenous query must have ANSI_NULLS set option ON, set it and retry'.
Is the ANSI_NULLS option set for each db, or each server? And how can I check a DB or Server to see what the setting for ANSI_NULLS is? Does the local and remote/linked server/db need this option ON?
Any idea why this remote query works form QA but not from an application?
Thanks-
Scott
View 1 Replies
View Related
Jul 20, 2005
Getting an "incorrect settings: 'ANSI_NULLS., QUOTED_IDENTIFIER'."error after creating a view.We wanted a composite unique constraint that ignored nulls, so we setup a view using the following script:/* --- start --- */BEGIN TRANSACTIONSET QUOTED_IDENTIFIER ONSET ARITHABORT ONSET NUMERIC_ROUNDABORT OFFSET CONCAT_NULL_YIELDS_NULL ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONCOMMITGOCREATE VIEW vw_MyViewWITH SCHEMABINDINGASSELECT Col1, Col2 FROM dbo.MyTable WHERECol2 IS NOT NULLGO/* --- end --- */and then added the constraint to the new view/* --- start --- */CREATE UNIQUE CLUSTERED INDEX AK_MyTable_Constraint1 ONvw_MyView(Col1, Col2)GO/* --- end --- */I thought we were doing fine, 'til we started running some DELETEstored procedures and got the above error. The error also citedARITHABORT as an incorrect setting until we ran this script:/* --- start --- */USE masterDECLARE @value intSELECT @value = value FROM syscurconfigsWHERE config = 1534SET @value = @value | 64EXEC sp_configure 'user options', @valueRECONFIGURE/* --- end --- */TIA to anyone kind enough to shed some light on this for me. Is theresomething we should have done differently in creating the view andindex? If not, what's the procedure for working through thesesettings errors?I've read through some other threads on this subject, but didn'treally find what I was looking for. Thanks again for any help. Wouldbe appreciated.-matt
View 3 Replies
View Related
May 8, 2008
As noted on the msdn the ANSI_NULLS for a stored procedure are set at time off creation (http://msdn.microsoft.com/en-us/library/aa259229(SQL.80).aspx).
Using:
- SQL server 2000
My question is; How do i get the details of a sp and display the ANSI_NULLS setting for it.
("select * from information_schema.routines" doesnt shows this information)
Is this possible in SQL 2000 (or 2005)?
View 3 Replies
View Related
Oct 26, 2006
Hello,
I'm using the SQL Native Client to connect my VB6 application to my SQL Server 2005 database. My SQL Server 2005 database has ANSI_NULLS turned off. I have a query embedded in my VB6 application that uses the syntax "fieldName = NULL" in the WHERE clause. When I execute the query via the SQL Native Client, the query returns zero rows. When I execute the same query via the old OLEDB driver, the query returns many rows. If I change my query to "fieldName IS NULL" syntax, the problem goes away. However, I am more interested in figuring out why ANSI_NULLS are turned on when using the SQL Native Client even though my database has them turned off. Is there a connection string property that I can use with the SQL Native Client to ensure that the query is executed with ANSI_NULLS off?
Thanks
View 15 Replies
View Related
Mar 13, 2004
right im programming a database program and i need some code. (the database is in sql/msde)
This is what i am attempting to do:
I have a page with textboxes on it with buttons at the bottom
i need to program the database with the add function
this is the code that i have already
Imports system.data.sqlclient
'You need two objects
Dim conn as new sqlconnection
dim comm as new sqlcommand
conn.connectionstring = "Your UDL String here"
comm.text = "insert into books (isbn, title, author, publisher, description, price,)
'books is the name of the databse
values ( '1234' , 'Title', 'Author', 'Publisher' )
conn.open
comm.connection = conn
comm.executenonquery
comm.close
conn.close
now i think i need to insert this at the top of the page but im not 100% sure (btw i have the udl string)
so what do i need to add to this code to make the page submit data that has been enterd into textboxes into a database table(sql/msde) on the click of the button?
thanks for any help provided
View 1 Replies
View Related
Feb 11, 2002
Hi
1) I am facing the problem of database suspect how do I solve the problem.
2) When I tried to cofigure my SQL mail I am not getting the option or Icon of SQL MAIL in the enterprise manager. I think it probably got deleted , how do I retrieve it .
Thanks for the help in advance
Arya Sharma
View 2 Replies
View Related
Mar 27, 2006
Does anyone know what aspnet_regsql.exe requires to run stand-alone? I have to apply the .NET 2.0 Management/Role API to a sql2000 database on a machine that does not have the .net 2.0 framework installed.
View 3 Replies
View Related
Sep 1, 2004
Hi Champs!!
I am totally new in OLAP and want know more prior to start....pls tell me know the difference between these..
Regular/Virtual/Linked cubes..
Star schema/ snow flake/ parent-child/ virtual dimension/ mining model
Thanks in advance
-Deepak Kumar.
View 1 Replies
View Related
Sep 15, 2007
Hi,I have two tables TableA and TableB. I have a stored procedure whichruns every morning and based on some logic dumps rows from TableA toTableB. In Table B there are two additional colums ID and RunID. ID isa normal sequence applied for all rows. But the RunId should beconstant for a run of stored proc.So for e.g. say structure of Table A and Table BTable A Table Bcol1 ID RunID col1Now when I run stored proc I want rows copied as belowTableA TableBcol1 ID RunID col1row1 1 1 row1row2 2 1 row2The next day when stored prc runs I want data asTableA TableBcol1 ID RunID col1row1 1 1 row1row2 2 1 row2row1 3 2 row1row2 4 2 row2So for every run of stored proc each day I want the Run ID incrementedonly by one and ID is normal sequence which increments for allrowsinserted.Please help.Nick
View 1 Replies
View Related
Mar 12, 2008
Actually report server is in seperate server and db server is seperate.
Is it necessary to have sp2 on both the servers.
View 4 Replies
View Related
