Hidden Graph And Table Show Up As Empty Page When Rendered To Pdf
Feb 23, 2007
I have a report that has 3 graphs and two tables that render to 5 pages in pdf. Some users should only get a subset of the 5 elements and some need all 5. When I set the Hidden property (in the designer or via a parameter) for any of the elements they become invisible but in pdf but the report still prints out a page for the hidden element. It works fine in the designer and rendered to html and excel but I get an extra page in pdf. it is like the hidden element still takes up the same amount of space but is just hidden.
I have a need to create a report that has a graph at the top and a table at the bottom. The graph at the top can optionally be made hidden because they cause problems when exported to Excel as images. However, when I set the Hidden property of the graph to true, positions of all items on the report remain absolute. Meaning of course that the table that is located half-way down the page remains half-way down the page and there is a lot of nothing on the first half where the graph used to be.
It would be desirable to have the ability to have the table move up when the graph is not visible, however it obviously doesn't do it automatically and also refuses me the ability to change the position with an expression.
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
I want to toggle the visibility of a report item in my page footer based on whether or not a particular subreport has been rendered.
The report has 3 subreports. The subreport above the subreport in question can span several pages, so the subreport I want information on can render on page 1 (for a short report) or page 12 (for example) on a longer report.
Is there a way to determine within the main report when a particular subreport has been rendered and is currently visible?
I have a line graph in my report.My report has no parameters on it.What I ideally want it to do is if I run the report today (May) it will only show me the last 12 months so May to May.At the moment it is including April from last year as well, so would want that excluded. If I run it in two months time in July I would want it to only show July to July.The chart has the categories of Finanical Year (in the 2014-2015 format) and the actual month name.
I'm having an interesting problem. In my report, I use a table to show my data set. The borders of the table are giving me a hard time...
The problem is, I'm not being able to display the bottom border for a row, but only at the end of the page, causing the table containing multi paged report data to be seen inside a box. Just to be clear;
I don't want to display borders of each row I don't want to display table footer in each page (Only on last page) I've already tried to display page footer, top border. Its not the answer :D
I have a graph in my rdl which retrieves data from database.It works fine in report viewer and also when i export it in PDF and Excel format,but in HTML,it wont show?What could i do about this,i can see in the property that it is looking for the getimage.aspx.I had tried to incorporate the code i have seen from the internet but it seems to me,that the new reporting services now dont have the method renderstream?and what would be my parameters for whatever method that would act as substitute for that missing method..Thanks..
I have 2 tables that I have set to PageBreakOnStart. They have conditional visibility. What I am seeing is that if i put an item in ToggleItem, the page break functionality does not work anymore.
Is this by design? I would have expected the page break to be there if the item is visible, and not if it is hidden.
I have been trying for some time to create a columnar report where certain columns can be hidden as requested by the user. I have tried placing the complete column set in the report, and then hiding a subset of columns, but blank pages are produced when rendered to PDF since the report body does not appear to shrink as columns are hidden and justify themselves to the left. I have tried a table, list, and matrix to no avail...
Does anyone know of a workaround, a trick, or even a hack that may accomplish what I am after?
I'm running into an issue with a report we have, I was hoping you may be able to help...
We have a report that contains a rectangle which has conditional visiblity. When the expression evaluates to true, the contents of the rectangle are indeed "hidden", but we are seeing a blank page.
The rectangle does NOT have page breaks selected before or after it. (and neither does the objects before or after that rectangle.)
We are using SSRS 2005.We designed one report.This report contains Table and chart controls .When Table is hidden,chart only is visible, this chart is going to show only on last page.There is a white space in top of the chart while hiding the table control.
Consider for an Example Report one tables and one chart . We want to show only chart,So we made Table's visible property is false.Total Number of pages is five and table has only four pages and chart has only one page that is in last page. Now the report showing Four pages are empty with header and footer and last page have a chart with header and footer.
Any suggestions how to avoid the empty pages?
I tried to Filter property to filter the table.Same empty page with header and footer is only visible
We have hidden few measure groups in cube for time being, where Users can browse the cube with Excel pivot. But, All these measures can be seen from Excel pivot in 'Show fields related to' drop down.
Need to remove the hidden measure groups from showing in Excel pivot and to remove 'All' option in 'Show Fields related to', So that users may not get confused by seeing all the measures. Can we achieve this.
if I create a dimension from fact table, then it only has members which appeared in fact table. but if I create dimension from dimension table, then it shows all members, even those with no data. how can I show only those with existing data in member list?
I have a sql query that gets the count of exams held in each month.
Below is the code that I have used.
select Examid, count(*) as CumCount from [dbo].[Exams] where ExamCategory in ('Major','Critical') and Month(EXOCCRDATE) = Month(getdate()) and Year(EXOCCRDATE) = Year(getdate()) group by Examid
The code works good when we have data for the current month. When we dont have any exams for the current month, the code outputs empty values. I want the code to be altered so that when there is no value returned in the output, i want a default value shown in the output.
I have attached the sample data that I am using. In the data we dont have dates for the month of October. So when I run the code it will display empty output. So what I need is I need a text like 'No Data' to be shown when no value is returned by the query.
Given a model in Power Pivot with a number of KPIs that are hidden with the 'hide from client tools' option. After restoring the model in SSAS and connecting to the model from Excel, the KPIs are visible under a separate category/table "KPIs".
Other hidden items in the model like columns and measures remain invisible.
Is this normal behavior and what can I do about this?
A Fact table <<Company Revenue>> 2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December ------------------------------------------------------- A | 20000 ------------------------------------------------------- D | 3900 -------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December ----------------------------------------------------------------------------------- A | | | | | 20000 ---------------------------------------------------------------------------------- B | | | | | ---------------------------------------------------------------------------------- C | | | | | ---------------------------------------------------------------------------------- D | | | | | 3900 -----------------------------------------------------------------------------------
The last page of the report has a table or rectangle (tried both) which is supposed to be invisible based on a parameter. However, the page still shows up with only the header! Apparently the report knows that the next element (table or rectangle) has to be on a new page, and only too late figures out that the element is invisible.
Anybody else encountered this, or has a solution? Thanks
I have a suite of several SSRS reports that differ essentially on the stored procedure called. All have very the same one-page header block and all have a footer. Those where a large number of pages are produced, page without fault when printed or converted to PDF.
Two page reports often break down on printing, so that page 1 only has the header and a footer and all the detail lines are printed on page2 (together with the footer). However on the screen the report paged correctly.
I have checked all the obvious problems such as page dimensions exceeding that of the print medium. (A series of such problems was fixed earlier in development.)
I have observed this behaviour with SQL2005 SP1 and SP2 (i.e. SP2 did not provide any fix in this area). The host OS for development and production is Windows 2003 server. The tests were done by viewing in IE6 and the fault only became apparent when going to print preview, printing or in PDF production.
This has the appearance of a bug in SSRS hereby intermediate length reports are not handled correctly. It appears to happen when the amount of detail lines just fills page 2. As soon as the report has sufficient lines to be 3 pages long (page 1 is header plus some details lines plus footer, page 2 is full of detail lines plus footer and page 3 is remaining detail lines plus footer then the problem is no longer seen! Where the detail lines will all fit on page 1, then the problem is not seen.
I observe this variation in behaviour since I am able to switch between different sized datasets and thus switch between the different scenarios described above. I should also note that the reports are in landscape mode.
I am desging my report with few text boxes , List , Matrix Tools and binding them with proper fields
if matrix having no data it is working fine but when ever the matrix having data, then also it is working but am Getting One extra empty page why this is happening i am not getting
my report generates most than a page, i want sent the parameters and render only the fist page , the if i need the other when the number page chage the control render the nex page, how i can do it, this because in this moment the control render all the report and the show it , and sometimes i have to wait to long time to see it
I am using reporting services to build a report to show customer's balance statements. I need each page only show one customer and related transactions and balance etc.
Now it shows several customers' balance in one page, how can i change it to show only one record per one page, and also one customer per one page when print it out.
Case: Exporting Report to PDF/Printing/TIFF Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
Hi, I need to make the format by pulling the number from a table from sql server 7.0 and show the result in a table and have the following format $120,534.45 is that possible.
I created a report with a parameter. The parameter was created using a dataset in the report designer. This works fine. I deployed the report (webhost4life) and the report runs fine in the report manager. I am able to select my casenumber click on the default view report button and it works.
Problem: I embedd the report into an aspx page frmReports1.aspx. I call this page from another page (form). the frmReports.aspx page comes up and displays the default drop down list box with the casenumbers (fine). I select the casenumber and click on the view report button and NOTHING. I here the postbacks taking place but all that happens is the default value appears in the drop down list box and the toolbar shows. I checked permissions and everything is fine. I searched the forum and thought i found the solution with the inLine HTML and Async (still nothing) I can only think that something is not going right with the parameter. Here is my html, and code behind code. any help would be greatly apprcieated.
Public Function GetFormsCredentials(ByRef authCookie As System.Net.Cookie, ByRef userName As String, ByRef password As String, ByRef authority As String) As Boolean Implements Microsoft.Reporting.WebForms.IReportServerCredentials.GetFormsCredentials
End Function
End Class
Public Function GetFormsCredentials(ByRef authCookie As Cookie, _
ByRef userName As String, _
ByRef password As String, _
ByRef authority As String) _
As Boolean
authCookie = Nothing
userName = Nothing
password = Nothing
authority = Nothing
'Not using form credentials
Return False
End Function
Protected Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load
'ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
'rvTest.ServerReport.Refresh()
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
rvTest.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
My report has a number of tables. These table design is as [Total(numeric),Year(numeric),Month(varchar(15)]. Each table on report is populated based on individual tables in Mngt Studio.
My problem is.If table is empty,the table on report does not get populated/displayed.It is hidden.How do I return a message,Example {"No Value for table A"} instead and show the table in report only when the table has some value.
I have written an expression like this.But it just hides the table if its empty,and im not able to return a value "No Value"instead.
=IIF(Fields!Month.Value IS Nothing,"No Value for table A",False)
